Re: [PATCH v2] usb: typec: tcpci_mt6360: Update for BMC PHY setting

[Macpaul Lin <macpaul.lin@mediatek.com>]

On Tue, 2022-05-10 at 13:13 +0800, cy_huang wrote:
> From: ChiYuan Huang <cy_huang@richtek.com>
> 
> Update MT6360 BMC PHY Tx/Rx setting for the compatibility.
> 
> Macpaul reported this CtoDP cable attention message cannot be
> received from
> MT6360 TCPC. But actually, attention message really sent from UFP_D
> device.
> 
> After RD's comment, there may be BMC PHY Tx/Rx setting causes this
> issue.
> 
> Below's the detailed TCPM log and DP attention message didn't
> received from 6360
> TCPCI.
> [ 1206.367775] Identity: 0000:0000.0000
> [ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405
> [ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start
> [ 1206.447383] PD TX, header: 0x1d6f
> [ 1206.449393] PD TX complete, status: 0
> [ 1206.454110] PD RX, header: 0x184f [1]
> [ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1
> [ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished
> [ 1206.456873] cc:=4
> [ 1206.473100] AMS STRUCTURED_VDMS start
> [ 1206.473103] PD TX, header: 0x2f6f
> [ 1206.475397] PD TX complete, status: 0
> [ 1206.480442] PD RX, header: 0x2a4f [1]
> [ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2
> [ 1206.483150] AMS STRUCTURED_VDMS finished
> [ 1206.483151] cc:=4
> [ 1206.505643] AMS STRUCTURED_VDMS start
> [ 1206.505646] PD TX, header: 0x216f
> [ 1206.507933] PD TX complete, status: 0
> [ 1206.512664] PD RX, header: 0x1c4f [1]
> [ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1
> [ 1206.515460] AMS STRUCTURED_VDMS finished
> [ 1206.515461] cc:=4
> 
> Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360
> Type-C driver")
> Reported-by: Macpaul Lin <macpaul.lin@mediatek.com>
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> Cc: stable <stable@vger.kernel.org>
> ---
>  drivers/usb/typec/tcpm/tcpci_mt6360.c | 26
> ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c
> b/drivers/usb/typec/tcpm/tcpci_mt6360.c
> index f1bd9e0..8a952ea 100644
> --- a/drivers/usb/typec/tcpm/tcpci_mt6360.c
> +++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c
> @@ -15,6 +15,9 @@
>  
>  #include "tcpci.h"
>  
> +#define MT6360_REG_PHYCTRL1	0x80
> +#define MT6360_REG_PHYCTRL3	0x82
> +#define MT6360_REG_PHYCTRL7	0x86
>  #define MT6360_REG_VCONNCTRL1	0x8C
>  #define MT6360_REG_MODECTRL2	0x8F
>  #define MT6360_REG_SWRESET	0xA0
> @@ -22,6 +25,8 @@
>  #define MT6360_REG_DRPCTRL1	0xA2
>  #define MT6360_REG_DRPCTRL2	0xA3
>  #define MT6360_REG_I2CTORST	0xBF
> +#define MT6360_REG_PHYCTRL11	0xCA
> +#define MT6360_REG_RXCTRL1	0xCE
>  #define MT6360_REG_RXCTRL2	0xCF
>  #define MT6360_REG_CTDCTRL2	0xEC
>  
> @@ -106,6 +111,27 @@ static int mt6360_tcpc_init(struct tcpci *tcpci,
> struct tcpci_data *tdata)
>  	if (ret)
>  		return ret;
>  
> +	/* BMC PHY */
> +	ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL1, 0x3A70);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_write(regmap, MT6360_REG_PHYCTRL3,  0x82);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_write(regmap, MT6360_REG_PHYCTRL7, 0x36);
> +	if (ret)
> +		return ret;
> +
> +	ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL11,
> 0x3C60);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_write(regmap, MT6360_REG_RXCTRL1, 0xE8);
> +	if (ret)
> +		return ret;
> +
>  	/* Set shipping mode off, AUTOIDLE on */
>  	return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A);
>  }

Thanks for helping me to fix this issue.

Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>

Regards,
Macpaul Lin