* Plugging USB-C adapter into one port results in `Failed to set U2 timeout to 0x3f,error code -110`
@ 2025-08-13 7:47 Paul Menzel
2025-08-14 13:49 ` Mathias Nyman
0 siblings, 1 reply; 4+ messages in thread
From: Paul Menzel @ 2025-08-13 7:47 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Mathias Nyman, linux-usb, Kai-Heng Feng
[-- Attachment #1: Type: text/plain, Size: 5876 bytes --]
Dear Linux folks,
On an Intel Kaby Lake-R Dell XPS 13 9370, plugging in an 8-port LMP
USB-C mini Dock into the port on the left side closer to the panel,
Linux 6.16 logs:
[ 0.000000] Linux version 6.16-amd64
(debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian
14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP
PREEMPT_DYNAMIC Debian 6.16-1~exp1 (2025-07-31)
[…]
[ 0.000000] DMI: Dell Inc. XPS 13 9370/0RMYH9, BIOS 1.21.0
07/06/2022
[…]
[ 99.566522] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd
failed due to incorrect slot or ep state.
[ 99.566565] usb 4-2.1: Failed to set U2 timeout to 0x3f,error
code -110
[ 99.566787] hub 4-2.1:1.0: USB hub found
[ 99.587655] hub 4-2.1:1.0: config failed, can't read hub
descriptor (err -22)
[ 99.594669] usb 4-2.1: Failed to suspend device, error -19
[…]
Sometimes it’s logged several times quickly in succession, sometimes
only once or twice.
This is not happening when plugging it into the other two USB-C ports.
It’s also not happening with the only USB-C port on the Dell XPS 13 9360.
With Linux 6.12.30 and 6.12.38 different things are logged:
[ 0.000000] DMI: Dell Inc. XPS 13 9370/0RMYH9, BIOS 1.21.0
07/06/2022
[…]
[ 55.510020] usb 4-2.1: Enable of device-initiated U1 failed.
[ 55.510037] usb 4-2.1: Failed to set U1 timeout to 0x0,error
code -19
[ 55.510121] usb 4-2.1: Failed to set U2 timeout to 0x3f,error
code -19
[ 55.510286] hub 4-2.1:1.0: USB hub found
[ 55.531548] hub 4-2.1:1.0: config failed, can't read hub
descriptor (err -22)
[ 55.539118] usb 4-2.1: Failed to suspend device, error -19
Please find the logs attached.
Kind regards,
Paul
[1]: https://lmp-adapter.com/product/lmp-usb-c-mini-dock/
[2]: https://lkml.org/lkml/2024/12/5/355
PS: Output of `lsusb -t` with adapter plugged into the different ports.
$ lsusb -t # lmp adapter plugged into right side
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 001: Dev 005, If 0, Class=Hub, Driver=hub/5p, 480M
|__ Port 001: Dev 006, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 005: Dev 008, If 0, Class=Billboard, Driver=[none], 480M
|__ Port 005: Dev 002, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 005: Dev 002, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 005: Dev 002, If 2, Class=Video, Driver=uvcvideo, 480M
|__ Port 005: Dev 002, If 3, Class=Video, Driver=uvcvideo, 480M
|__ Port 007: Dev 003, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 007: Dev 003, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 010: Dev 004, If 0, Class=Communications, Driver=cdc_acm, 12M
|__ Port 010: Dev 004, If 1, Class=CDC Data, Driver=cdc_acm, 12M
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/6p, 5000M
|__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 001: Dev 003, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 003: Dev 005, If 0, Class=Vendor Specific Class,
Driver=r8152, 5000M
|__ Port 004: Dev 004, If 0, Class=Mass Storage,
Driver=usb-storage, 5000M
$ lsusb -t # lmp adapter plugged into left side first, problematic
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 005: Dev 002, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 005: Dev 002, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 005: Dev 002, If 2, Class=Video, Driver=uvcvideo, 480M
|__ Port 005: Dev 002, If 3, Class=Video, Driver=uvcvideo, 480M
|__ Port 007: Dev 003, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 007: Dev 003, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 010: Dev 004, If 0, Class=Communications, Driver=cdc_acm, 12M
|__ Port 010: Dev 004, If 1, Class=CDC Data, Driver=cdc_acm, 12M
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 480M
|__ Port 002: Dev 002, If 0, Class=Hub, Driver=hub/5p, 480M
|__ Port 001: Dev 003, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 003: Dev 005, If 0, Class=Vendor Specific Class,
Driver=r8152, 480M
|__ Port 004: Dev 004, If 0, Class=Mass Storage,
Driver=usb-storage, 480M
|__ Port 005: Dev 006, If 0, Class=Billboard, Driver=[none], 480M
/: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 10000M
$ lsusb -t # lmp adapter plugged into left side second
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 005: Dev 002, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 005: Dev 002, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 005: Dev 002, If 2, Class=Video, Driver=uvcvideo, 480M
|__ Port 005: Dev 002, If 3, Class=Video, Driver=uvcvideo, 480M
|__ Port 007: Dev 003, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 007: Dev 003, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 010: Dev 004, If 0, Class=Communications, Driver=cdc_acm, 12M
|__ Port 010: Dev 004, If 1, Class=CDC Data, Driver=cdc_acm, 12M
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 480M
|__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/5p, 480M
|__ Port 001: Dev 003, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 005: Dev 005, If 0, Class=Billboard, Driver=[none], 480M
/: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 10000M
|__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 001: Dev 003, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 004: Dev 004, If 0, Class=Mass Storage,
Driver=usb-storage, 5000M
[-- Attachment #2: 20250813--dell-xps-13-9370--linux-6.12.30-messages.txt --]
[-- Type: text/plain, Size: 93565 bytes --]
[ 0.000000] Linux version 6.12.30-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.30-1 (2025-05-28)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.12.30-amd64 root=UUID=118784b1-3045-408c-a9be-2a72336ae938 ro quiet log_buf_len=8M
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002c6c2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000002c6c3000-0x000000002c6c3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000002c6c4000-0x000000002c6c4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000002c6c5000-0x000000003dceffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003dcf0000-0x000000003e0affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003e0b0000-0x000000003e0fcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003e0fd000-0x000000003e7b4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003e7b5000-0x000000003fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002ae7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x1fb35018-0x1fb45057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fb35017] usable
[ 0.000000] reserve setup_data: [mem 0x000000001fb35018-0x000000001fb45057] usable
[ 0.000000] reserve setup_data: [mem 0x000000001fb45058-0x000000002c6c2fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000002c6c3000-0x000000002c6c3fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000002c6c4000-0x000000002c6c4fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000002c6c5000-0x000000003dceffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000003dcf0000-0x000000003e0affff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000003e0b0000-0x000000003e0fcfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000003e0fd000-0x000000003e7b4fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000003e7b5000-0x000000003fffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000003ffff000-0x000000003fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000048000000-0x0000000048dfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000002ae7fffff] usable
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x3e0c0000 ACPI 2.0=0x3e0c0000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x3e756000 ESRT=0x3fdc1698 MEMATTR=0x3b1a9298 INITRD=0x2c7b6d98 TPMEventLog=0x3e0b7018
[ 0.000000] efi: Remove mem37: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem40: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem41: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9370/0RMYH9, BIOS 1.21.0 07/06/2022
[ 0.000000] DMI: Memory slots populated: 2/2
[ 0.000000] tsc: Detected 1900.000 MHz processor
[ 0.000000] tsc: Detected 1899.950 MHz TSC
[ 0.000700] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000702] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000711] last_pfn = 0x2ae800 max_arch_pfn = 0x400000000
[ 0.000715] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000717] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001044] last_pfn = 0x48e00 max_arch_pfn = 0x400000000
[ 0.007392] esrt: Reserving ESRT space from 0x000000003fdc1698 to 0x000000003fdc16d0.
[ 0.007397] Using GB pages for direct mapping
[ 0.018279] printk: log_buf_len: 8388608 bytes
[ 0.018283] printk: early log buf free: 125368(95%)
[ 0.018284] RAMDISK: [mem 0x20646000-0x238b2fff]
[ 0.018699] ACPI: Early table checksum verification disabled
[ 0.018702] ACPI: RSDP 0x000000003E0C0000 000024 (v02 DELL )
[ 0.018706] ACPI: XSDT 0x000000003E0C00C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.018711] ACPI: FACP 0x000000003E0E69D0 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.018715] ACPI: DSDT 0x000000003E0C0260 02676C (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.018718] ACPI: FACS 0x000000003E7B2180 000040
[ 0.018720] ACPI: APIC 0x000000003E0E6AE0 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.018722] ACPI: FPDT 0x000000003E0E6BA0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.018725] ACPI: FIDT 0x000000003E0E6BE8 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.018727] ACPI: MCFG 0x000000003E0E6C98 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.018729] ACPI: HPET 0x000000003E0E6CD8 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.018732] ACPI: SSDT 0x000000003E0E6D10 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.018734] ACPI: BOOT 0x000000003E0E7070 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.018736] ACPI: SSDT 0x000000003E0E7098 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.018739] ACPI: HPET 0x000000003E0E8378 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.018741] ACPI: SSDT 0x000000003E0E83B0 000CEF (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.018744] ACPI: UEFI 0x000000003E0E90A0 000042 (v01 00000000 00000000)
[ 0.018746] ACPI: SSDT 0x000000003E0E90E8 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.018748] ACPI: LPIT 0x000000003E0EA898 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.018751] ACPI: SSDT 0x000000003E0EA930 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.018753] ACPI: SSDT 0x000000003E0EAA98 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.018756] ACPI: SSDT 0x000000003E0EAD38 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.018758] ACPI: SSDT 0x000000003E0EDD40 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.018761] ACPI: DBGP 0x000000003E0EE258 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.018763] ACPI: DBG2 0x000000003E0EE290 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.018765] ACPI: SSDT 0x000000003E0EE2E8 000801 (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.018768] ACPI: SSDT 0x000000003E0EEAF0 00CFC3 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.018770] ACPI: MSDM 0x000000003E0FBAB8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.018772] ACPI: SLIC 0x000000003E0FBB10 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.018775] ACPI: NHLT 0x000000003E0FBC88 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.018777] ACPI: BGRT 0x000000003E0FBCB8 000038 (v00 01072009 AMI 00010013)
[ 0.018779] ACPI: TPM2 0x000000003E0FBCF0 000034 (v03 DELL CBX3 00000001 AMI 00000000)
[ 0.018782] ACPI: ASF! 0x000000003E0FBD28 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.018784] ACPI: DMAR 0x000000003E0FBDC8 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.018786] ACPI: Reserving FACP table memory at [mem 0x3e0e69d0-0x3e0e6adb]
[ 0.018787] ACPI: Reserving DSDT table memory at [mem 0x3e0c0260-0x3e0e69cb]
[ 0.018788] ACPI: Reserving FACS table memory at [mem 0x3e7b2180-0x3e7b21bf]
[ 0.018789] ACPI: Reserving APIC table memory at [mem 0x3e0e6ae0-0x3e0e6b9b]
[ 0.018789] ACPI: Reserving FPDT table memory at [mem 0x3e0e6ba0-0x3e0e6be3]
[ 0.018790] ACPI: Reserving FIDT table memory at [mem 0x3e0e6be8-0x3e0e6c93]
[ 0.018790] ACPI: Reserving MCFG table memory at [mem 0x3e0e6c98-0x3e0e6cd3]
[ 0.018791] ACPI: Reserving HPET table memory at [mem 0x3e0e6cd8-0x3e0e6d0f]
[ 0.018791] ACPI: Reserving SSDT table memory at [mem 0x3e0e6d10-0x3e0e7068]
[ 0.018792] ACPI: Reserving BOOT table memory at [mem 0x3e0e7070-0x3e0e7097]
[ 0.018793] ACPI: Reserving SSDT table memory at [mem 0x3e0e7098-0x3e0e8375]
[ 0.018793] ACPI: Reserving HPET table memory at [mem 0x3e0e8378-0x3e0e83af]
[ 0.018794] ACPI: Reserving SSDT table memory at [mem 0x3e0e83b0-0x3e0e909e]
[ 0.018795] ACPI: Reserving UEFI table memory at [mem 0x3e0e90a0-0x3e0e90e1]
[ 0.018795] ACPI: Reserving SSDT table memory at [mem 0x3e0e90e8-0x3e0ea895]
[ 0.018796] ACPI: Reserving LPIT table memory at [mem 0x3e0ea898-0x3e0ea92b]
[ 0.018796] ACPI: Reserving SSDT table memory at [mem 0x3e0ea930-0x3e0eaa90]
[ 0.018797] ACPI: Reserving SSDT table memory at [mem 0x3e0eaa98-0x3e0ead36]
[ 0.018798] ACPI: Reserving SSDT table memory at [mem 0x3e0ead38-0x3e0edd39]
[ 0.018798] ACPI: Reserving SSDT table memory at [mem 0x3e0edd40-0x3e0ee256]
[ 0.018799] ACPI: Reserving DBGP table memory at [mem 0x3e0ee258-0x3e0ee28b]
[ 0.018799] ACPI: Reserving DBG2 table memory at [mem 0x3e0ee290-0x3e0ee2e3]
[ 0.018800] ACPI: Reserving SSDT table memory at [mem 0x3e0ee2e8-0x3e0eeae8]
[ 0.018801] ACPI: Reserving SSDT table memory at [mem 0x3e0eeaf0-0x3e0fbab2]
[ 0.018801] ACPI: Reserving MSDM table memory at [mem 0x3e0fbab8-0x3e0fbb0c]
[ 0.018802] ACPI: Reserving SLIC table memory at [mem 0x3e0fbb10-0x3e0fbc85]
[ 0.018802] ACPI: Reserving NHLT table memory at [mem 0x3e0fbc88-0x3e0fbcb4]
[ 0.018803] ACPI: Reserving BGRT table memory at [mem 0x3e0fbcb8-0x3e0fbcef]
[ 0.018804] ACPI: Reserving TPM2 table memory at [mem 0x3e0fbcf0-0x3e0fbd23]
[ 0.018805] ACPI: Reserving ASF! table memory at [mem 0x3e0fbd28-0x3e0fbdc7]
[ 0.018805] ACPI: Reserving DMAR table memory at [mem 0x3e0fbdc8-0x3e0fbeb7]
[ 0.018929] No NUMA configuration found
[ 0.018929] Faking a node at [mem 0x0000000000000000-0x00000002ae7fffff]
[ 0.018940] NODE_DATA(0) allocated [mem 0x2ac3d5680-0x2ac3fffff]
[ 0.019124] Zone ranges:
[ 0.019124] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.019126] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.019127] Normal [mem 0x0000000100000000-0x00000002ae7fffff]
[ 0.019128] Device empty
[ 0.019129] Movable zone start for each node
[ 0.019131] Early memory node ranges
[ 0.019131] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.019133] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.019133] node 0: [mem 0x0000000000100000-0x000000002c6c2fff]
[ 0.019134] node 0: [mem 0x000000002c6c5000-0x000000003dceffff]
[ 0.019135] node 0: [mem 0x000000003ffff000-0x000000003fffffff]
[ 0.019136] node 0: [mem 0x0000000048000000-0x0000000048dfffff]
[ 0.019136] node 0: [mem 0x0000000100000000-0x00000002ae7fffff]
[ 0.019138] Initmem setup node 0 [mem 0x0000000000001000-0x00000002ae7fffff]
[ 0.019143] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.019144] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.019172] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.021719] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.021833] On node 0, zone DMA32: 8975 pages in unavailable ranges
[ 0.022561] On node 0, zone Normal: 29184 pages in unavailable ranges
[ 0.022641] On node 0, zone Normal: 6144 pages in unavailable ranges
[ 0.022650] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[ 0.023025] ACPI: PM-Timer IO Port: 0x1808
[ 0.023032] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.023033] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.023034] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.023034] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.023035] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.023035] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.023036] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.023037] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.023063] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.023065] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.023067] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.023070] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.023071] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.023078] e820: update [mem 0x3a6ab000-0x3a71efff] usable ==> reserved
[ 0.023088] TSC deadline timer available
[ 0.023092] CPU topo: Max. logical packages: 1
[ 0.023093] CPU topo: Max. logical dies: 1
[ 0.023093] CPU topo: Max. dies per package: 1
[ 0.023097] CPU topo: Max. threads per core: 2
[ 0.023097] CPU topo: Num. cores per package: 4
[ 0.023098] CPU topo: Num. threads per package: 8
[ 0.023098] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[ 0.023118] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.023122] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.023124] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.023125] PM: hibernation: Registered nosave memory: [mem 0x2c6c3000-0x2c6c4fff]
[ 0.023126] PM: hibernation: Registered nosave memory: [mem 0x3a6ab000-0x3a71efff]
[ 0.023128] PM: hibernation: Registered nosave memory: [mem 0x3dcf0000-0x3fffefff]
[ 0.023129] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x47ffffff]
[ 0.023131] PM: hibernation: Registered nosave memory: [mem 0x48e00000-0xffffffff]
[ 0.023132] [mem 0x4f800000-0xfdffffff] available for PCI devices
[ 0.023133] Booting paravirtualized kernel on bare hardware
[ 0.023135] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.028327] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.029150] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[ 0.029156] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[ 0.029158] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
[ 0.029176] Kernel command line: BOOT_IMAGE=/vmlinuz-6.12.30-amd64 root=UUID=118784b1-3045-408c-a9be-2a72336ae938 ro quiet log_buf_len=8M
[ 0.029227] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.12.30-amd64", will be passed to user space.
[ 0.029270] random: crng init done
[ 0.030594] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.031265] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.031393] Fallback order for Node 0: 0
[ 0.031395] Built 1 zonelists, mobility grouping on. Total pages: 2019979
[ 0.031397] Policy zone: Normal
[ 0.031403] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.031411] software IO TLB: area num 8.
[ 0.059024] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.059049] Kernel/User page tables isolation: enabled
[ 0.059081] ftrace: allocating 45689 entries in 179 pages
[ 0.067724] ftrace: allocated 179 pages with 5 groups
[ 0.068476] Dynamic Preempt: voluntary
[ 0.068523] rcu: Preemptible hierarchical RCU implementation.
[ 0.068524] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.068525] Trampoline variant of Tasks RCU enabled.
[ 0.068525] Rude variant of Tasks RCU enabled.
[ 0.068526] Tracing variant of Tasks RCU enabled.
[ 0.068526] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.068527] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.068536] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.068538] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.068539] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.072977] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.073192] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.073384] Console: colour dummy device 80x25
[ 0.073387] printk: legacy console [tty0] enabled
[ 0.073428] ACPI: Core revision 20240827
[ 0.073608] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.073642] APIC: Switch to symmetric I/O mode setup
[ 0.073644] DMAR: Host address width 39
[ 0.073645] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.073651] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.073653] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.073657] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.073658] DMAR: RMRR base: 0x0000003ddca000 end: 0x0000003dde9fff
[ 0.073660] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[ 0.073661] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.073662] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.073664] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.073665] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.073666] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.075760] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.075762] x2apic enabled
[ 0.075815] APIC: Switched APIC routing to: cluster x2apic
[ 0.079597] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x36c5f9386c6, max_idle_ns: 881590416379 ns
[ 0.079602] Calibrating delay loop (skipped), value calculated using timer frequency.. 3799.90 BogoMIPS (lpj=7599800)
[ 0.079656] CPU0: Thermal monitoring enabled (TM1)
[ 0.079701] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.079702] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4
[ 0.079706] process: using mwait in idle threads
[ 0.079709] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.079711] Spectre V2 : Mitigation: IBRS
[ 0.079712] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.079713] RETBleed: Mitigation: IBRS
[ 0.079714] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.079715] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.079716] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.079722] MDS: Mitigation: Clear CPU buffers
[ 0.079723] TAA: Mitigation: TSX disabled
[ 0.079724] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.079727] SRBDS: Mitigation: Microcode
[ 0.079731] GDS: Mitigation: Microcode
[ 0.079736] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.079738] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.079739] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.079740] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.079741] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.079743] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.079747] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.079748] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.079749] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.083600] Freeing SMP alternatives memory: 40K
[ 0.083600] pid_max: default: 32768 minimum: 301
[ 0.083600] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm
[ 0.083600] landlock: Up and running.
[ 0.083600] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.083600] AppArmor: AppArmor initialized
[ 0.083600] TOMOYO Linux initialized
[ 0.083600] LSM support for eBPF active
[ 0.083600] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.083600] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.083600] smpboot: CPU0: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[ 0.083600] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.083600] ... version: 4
[ 0.083600] ... bit width: 48
[ 0.083600] ... generic registers: 4
[ 0.083600] ... value mask: 0000ffffffffffff
[ 0.083600] ... max period: 00007fffffffffff
[ 0.083600] ... fixed-purpose events: 3
[ 0.083600] ... event mask: 000000070000000f
[ 0.083600] signal: max sigframe size: 2032
[ 0.083600] Estimated ratio of average max frequency by base frequency (times 1024): 1940
[ 0.083600] rcu: Hierarchical SRCU implementation.
[ 0.083600] rcu: Max phase no-delay instances is 1000.
[ 0.083600] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.083600] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.083600] smp: Bringing up secondary CPUs ...
[ 0.083600] smpboot: x86: Booting SMP configuration:
[ 0.083600] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.099729] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.099729] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.099729] smp: Brought up 1 node, 8 CPUs
[ 0.099729] smpboot: Total of 8 processors activated (30399.20 BogoMIPS)
[ 0.120919] node 0 deferred pages initialised in 16ms
[ 0.120923] Memory: 7721788K/8079916K available (16384K kernel code, 2486K rwdata, 11780K rodata, 4148K init, 4956K bss, 344780K reserved, 0K cma-reserved)
[ 0.120923] devtmpfs: initialized
[ 0.120923] x86/mm: Memory block size: 128MB
[ 0.120923] ACPI: PM: Registering ACPI NVS region [mem 0x2c6c3000-0x2c6c3fff] (4096 bytes)
[ 0.120923] ACPI: PM: Registering ACPI NVS region [mem 0x3e0fd000-0x3e7b4fff] (7045120 bytes)
[ 0.120923] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.120923] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.120923] pinctrl core: initialized pinctrl subsystem
[ 0.120923] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.120923] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.120923] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.120923] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.120923] audit: initializing netlink subsys (disabled)
[ 0.120923] audit: type=2000 audit(1755069473.000:1): state=initialized audit_enabled=0 res=1
[ 0.123675] thermal_sys: Registered thermal governor 'fair_share'
[ 0.123677] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.123678] thermal_sys: Registered thermal governor 'step_wise'
[ 0.123679] thermal_sys: Registered thermal governor 'user_space'
[ 0.123680] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.123688] cpuidle: using governor ladder
[ 0.123688] cpuidle: using governor menu
[ 0.123688] Simple Boot Flag at 0x47 set to 0x80
[ 0.123688] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.123688] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.123759] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.123772] PCI: Using configuration type 1 for base access
[ 0.123884] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.123884] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.123884] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.123884] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.123884] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.123884] ACPI: Added _OSI(Module Device)
[ 0.123884] ACPI: Added _OSI(Processor Device)
[ 0.123884] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.123884] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.155836] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.160728] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.165629] ACPI: Dynamic OEM Table Load:
[ 0.165629] ACPI: SSDT 0xFFFF9655C1AB0800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.165629] ACPI: Dynamic OEM Table Load:
[ 0.165629] ACPI: SSDT 0xFFFF965720A5C000 0005AC (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.168842] ACPI: Dynamic OEM Table Load:
[ 0.168848] ACPI: SSDT 0xFFFF9655C019B000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.170211] ACPI: Dynamic OEM Table Load:
[ 0.170215] ACPI: SSDT 0xFFFF9655C1AB3800 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.171138] ACPI: Dynamic OEM Table Load:
[ 0.171143] ACPI: SSDT 0xFFFF9655C1AB1C00 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.175746] ACPI: EC: EC started
[ 0.175747] ACPI: EC: interrupt blocked
[ 0.183746] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.183748] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.183750] ACPI: Interpreter enabled
[ 0.183785] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.183786] ACPI: Using IOAPIC for interrupt routing
[ 0.183825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.183826] PCI: Using E820 reservations for host bridge windows
[ 0.184281] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.189203] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.211317] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.211323] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.211452] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[ 0.211696] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.211698] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.212449] PCI host bridge to bus 0000:00
[ 0.212452] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.212455] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.212457] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.212459] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window]
[ 0.212460] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.212462] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.212478] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 conventional PCI endpoint
[ 0.212554] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.212563] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[ 0.212569] pci 0000:00:02.0: BAR 2 [mem 0x50000000-0x5fffffff 64bit pref]
[ 0.212573] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.212589] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.212721] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[ 0.212730] pci 0000:00:04.0: BAR 0 [mem 0xdc320000-0xdc327fff 64bit]
[ 0.212972] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.212988] pci 0000:00:14.0: BAR 0 [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.213047] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.213465] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[ 0.213482] pci 0000:00:14.2: BAR 0 [mem 0xdc335000-0xdc335fff 64bit]
[ 0.213623] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[ 0.213666] pci 0000:00:15.0: BAR 0 [mem 0xdc334000-0xdc334fff 64bit]
[ 0.214040] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[ 0.214072] pci 0000:00:15.1: BAR 0 [mem 0xdc333000-0xdc333fff 64bit]
[ 0.214362] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.214375] pci 0000:00:16.0: BAR 0 [mem 0xdc332000-0xdc332fff 64bit]
[ 0.214420] pci 0000:00:16.0: PME# supported from D3hot
[ 0.214638] pci 0000:00:16.3: [8086:9d3d] type 00 class 0x070002 conventional PCI endpoint
[ 0.214648] pci 0000:00:16.3: BAR 0 [io 0xf060-0xf067]
[ 0.214653] pci 0000:00:16.3: BAR 1 [mem 0xdc331000-0xdc331fff]
[ 0.214763] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[ 0.214781] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.214786] pci 0000:00:1c.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.214837] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.214854] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 0.215195] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400 PCIe Root Port
[ 0.215213] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.215218] pci 0000:00:1c.2: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.215268] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.215286] pci 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled
[ 0.215622] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[ 0.215644] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.215649] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.215656] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.215708] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.215724] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 0.216071] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[ 0.216093] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.216097] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.216160] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.216177] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 0.216535] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 conventional PCI endpoint
[ 0.216765] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[ 0.216776] pci 0000:00:1f.2: BAR 0 [mem 0xdc32c000-0xdc32ffff]
[ 0.216968] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[ 0.216987] pci 0000:00:1f.3: BAR 0 [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.217010] pci 0000:00:1f.3: BAR 4 [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.217052] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.217549] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.217607] pci 0000:00:1f.4: BAR 0 [mem 0xdc330000-0xdc3300ff 64bit]
[ 0.217678] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 0.217974] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint
[ 0.217996] pci 0000:01:00.0: BAR 1 [mem 0xdc200000-0xdc200fff]
[ 0.218100] pci 0000:01:00.0: supports D1 D2
[ 0.218101] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.218268] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.218667] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000 PCIe Endpoint
[ 0.218700] pci 0000:02:00.0: BAR 0 [mem 0xdc100000-0xdc101fff 64bit]
[ 0.218975] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.220258] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.220344] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.220637] pci 0000:6e:00.0: [144d:a808] type 00 class 0x010802 PCIe Endpoint
[ 0.220657] pci 0000:6e:00.0: BAR 0 [mem 0xdc000000-0xdc003fff 64bit]
[ 0.220947] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.223837] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.223879] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.223917] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.223954] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.223991] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.224029] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.224066] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.224103] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.231697] Low-power S0 idle used by default for system suspend
[ 0.235691] ACPI: EC: interrupt unblocked
[ 0.235692] ACPI: EC: event unblocked
[ 0.235697] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.235699] ACPI: EC: GPE=0x6e
[ 0.235700] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.235702] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.236029] iommu: Default domain type: Translated
[ 0.236029] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.236200] pps_core: LinuxPPS API ver. 1 registered
[ 0.236201] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.236204] PTP clock support registered
[ 0.236211] EDAC MC: Ver: 3.0.0
[ 0.237126] efivars: Registered efivars operations
[ 0.237126] NetLabel: Initializing
[ 0.237126] NetLabel: domain hash size = 128
[ 0.237126] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.237126] NetLabel: unlabeled traffic allowed by default
[ 0.237126] PCI: Using ACPI for IRQ routing
[ 0.259406] PCI: pci_cache_line_size set to 64 bytes
[ 0.260281] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.260283] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.260284] e820: reserve RAM buffer [mem 0x1fb35018-0x1fffffff]
[ 0.260285] e820: reserve RAM buffer [mem 0x2c6c3000-0x2fffffff]
[ 0.260286] e820: reserve RAM buffer [mem 0x3a6ab000-0x3bffffff]
[ 0.260287] e820: reserve RAM buffer [mem 0x3dcf0000-0x3fffffff]
[ 0.260289] e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
[ 0.260290] e820: reserve RAM buffer [mem 0x2ae800000-0x2afffffff]
[ 0.260323] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.260323] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.260323] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.260323] vgaarb: loaded
[ 0.260323] clocksource: Switched to clocksource tsc-early
[ 0.260340] VFS: Disk quotas dquot_6.6.0
[ 0.260349] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.260474] AppArmor: AppArmor Filesystem Enabled
[ 0.260489] pnp: PnP ACPI init
[ 0.260678] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.260681] system 00:00: [io 0xffff] has been reserved
[ 0.260683] system 00:00: [io 0xffff] has been reserved
[ 0.260684] system 00:00: [io 0xffff] has been reserved
[ 0.260685] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.260687] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.260809] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.261088] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.261090] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.261092] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.261094] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.261096] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.261097] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.261099] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.261101] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.261102] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.261105] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.261139] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.261141] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.261143] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.261145] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.261147] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.261148] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.261150] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.261379] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.262201] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.262204] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.265822] pnp: PnP ACPI: found 9 devices
[ 0.271489] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.271540] NET: Registered PF_INET protocol family
[ 0.271631] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.283592] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.283611] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.283634] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.283790] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.283985] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.284040] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.284082] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.284101] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.284143] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.284150] NET: Registered PF_XDP protocol family
[ 0.284161] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 1000
[ 0.284172] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]: assigned
[ 0.284176] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.284180] pci 0000:00:1c.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.284185] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.284188] pci 0000:00:1c.2: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.284194] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.284202] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.284205] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.284208] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.284213] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.284223] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.284230] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.284231] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.284233] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.284234] pci_bus 0000:00: resource 7 [mem 0x4f800000-0xdfffffff window]
[ 0.284236] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.284237] pci_bus 0000:01: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.284239] pci_bus 0000:02: resource 1 [mem 0xdc100000-0xdc1fffff]
[ 0.284240] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.284241] pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
[ 0.284243] pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.284244] pci_bus 0000:6e: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 0.285172] PCI: CLS 0 bytes, default 64
[ 0.285220] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[ 0.285280] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.285537] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.0
[ 0.285541] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.1
[ 0.285549] DMAR: No ATSR found
[ 0.285550] DMAR: No SATC found
[ 0.285551] DMAR: IOMMU feature fl1gp_support inconsistent
[ 0.285553] DMAR: IOMMU feature pgsel_inv inconsistent
[ 0.285554] DMAR: IOMMU feature nwfs inconsistent
[ 0.285555] DMAR: IOMMU feature pasid inconsistent
[ 0.285555] DMAR: IOMMU feature eafs inconsistent
[ 0.285556] DMAR: IOMMU feature prs inconsistent
[ 0.285557] DMAR: IOMMU feature nest inconsistent
[ 0.285558] DMAR: IOMMU feature mts inconsistent
[ 0.285558] DMAR: IOMMU feature sc_support inconsistent
[ 0.285559] DMAR: IOMMU feature dev_iotlb_support inconsistent
[ 0.285560] DMAR: dmar0: Using Queued invalidation
[ 0.285563] DMAR: dmar1: Using Queued invalidation
[ 0.285600] Trying to unpack rootfs image as initramfs...
[ 0.285915] pci 0000:00:02.0: Adding to iommu group 0
[ 0.285945] pci 0000:00:00.0: Adding to iommu group 1
[ 0.285954] pci 0000:00:04.0: Adding to iommu group 2
[ 0.285968] pci 0000:00:14.0: Adding to iommu group 3
[ 0.285976] pci 0000:00:14.2: Adding to iommu group 3
[ 0.285989] pci 0000:00:15.0: Adding to iommu group 4
[ 0.285996] pci 0000:00:15.1: Adding to iommu group 4
[ 0.286016] pci 0000:00:16.0: Adding to iommu group 5
[ 0.286027] pci 0000:00:16.3: Adding to iommu group 5
[ 0.286039] pci 0000:00:1c.0: Adding to iommu group 6
[ 0.286049] pci 0000:00:1c.2: Adding to iommu group 7
[ 0.286060] pci 0000:00:1c.4: Adding to iommu group 8
[ 0.286077] pci 0000:00:1d.0: Adding to iommu group 9
[ 0.286095] pci 0000:00:1f.0: Adding to iommu group 10
[ 0.286103] pci 0000:00:1f.2: Adding to iommu group 10
[ 0.286112] pci 0000:00:1f.3: Adding to iommu group 10
[ 0.286121] pci 0000:00:1f.4: Adding to iommu group 10
[ 0.286130] pci 0000:01:00.0: Adding to iommu group 11
[ 0.286152] pci 0000:02:00.0: Adding to iommu group 12
[ 0.286189] pci 0000:6e:00.0: Adding to iommu group 13
[ 0.287208] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.287211] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.287212] software IO TLB: mapped [mem 0x00000000366ab000-0x000000003a6ab000] (64MB)
[ 0.287274] sgx: EPC section 0x40200000-0x45f7ffff
[ 0.287802] sgx: SGX disabled: SGX launch control CPU feature is not available, /dev/sgx_enclave disabled.
[ 0.288198] Initialise system trusted keyrings
[ 0.288208] Key type blacklist registered
[ 0.288256] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.288267] zbud: loaded
[ 0.288404] fuse: init (API version 7.41)
[ 0.288535] integrity: Platform Keyring initialized
[ 0.288538] integrity: Machine keyring initialized
[ 0.303441] Key type asymmetric registered
[ 0.303447] Asymmetric key parser 'x509' registered
[ 0.388374] Freeing initrd memory: 51636K
[ 0.392885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.392930] io scheduler mq-deadline registered
[ 0.394148] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.394983] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.397804] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.397807] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.397992] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.398421] serial 0000:00:16.3: enabling device (0000 -> 0003)
[ 0.398959] 0000:00:16.3: ttyS0 at I/O 0xf060 (irq = 19, base_baud = 115200) is a 16550A
[ 0.399136] hpet_acpi_add: no address or irqs in _CRS
[ 0.399155] Linux agpgart interface v0.103
[ 0.426363] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[ 0.490537] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.492078] i8042: Warning: Keylock active
[ 0.493634] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.493639] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.493843] mousedev: PS/2 mouse device common for all mice
[ 0.493874] rtc_cmos 00:01: RTC can wake from S4
[ 0.494640] rtc_cmos 00:01: registered as rtc0
[ 0.494787] rtc_cmos 00:01: setting system clock to 2025-08-13T07:17:53 UTC (1755069473)
[ 0.494813] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.495126] intel_pstate: Intel P-state driver initializing
[ 0.495474] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.495541] intel_pstate: HWP enabled
[ 0.495808] efifb: probing for efifb
[ 0.495819] efifb: framebuffer at 0x50000000, using 32400k, total 32400k
[ 0.495821] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[ 0.495822] efifb: scrolling: redraw
[ 0.495823] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.495938] Console: switching to colour frame buffer device 240x67
[ 0.500975] fb0: EFI VGA frame buffer device
[ 0.501108] NET: Registered PF_INET6 protocol family
[ 0.506376] Segment Routing with IPv6
[ 0.506391] In-situ OAM (IOAM) with IPv6
[ 0.506424] mip6: Mobile IPv6
[ 0.506429] NET: Registered PF_PACKET protocol family
[ 0.506531] mpls_gso: MPLS GSO support
[ 0.527060] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.528844] microcode: Current revision: 0x000000f6
[ 0.528846] microcode: Updated early from: 0x000000f0
[ 0.529343] IPI shorthand broadcast: enabled
[ 0.530853] sched_clock: Marking stable (524001661, 6282639)->(566996319, -36712019)
[ 0.531135] registered taskstats version 1
[ 0.531280] Loading compiled-in X.509 certificates
[ 0.545377] Loaded X.509 cert 'Build time autogenerated kernel key: 9d293d8af98f23c96fa00be8164c417c049a1a83'
[ 0.547094] Demotion targets for Node 0: null
[ 0.547259] Key type .fscrypt registered
[ 0.547261] Key type fscrypt-provisioning registered
[ 0.565290] Key type encrypted registered
[ 0.565297] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.566546] integrity: Loading X.509 certificate: UEFI:db
[ 0.566582] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 0.566583] integrity: Loading X.509 certificate: UEFI:db
[ 0.566602] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.566603] integrity: Loading X.509 certificate: UEFI:db
[ 0.566616] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.568451] ima: Allocated hash algorithm: sha256
[ 0.663735] ima: No architecture policies found
[ 0.663801] evm: Initialising EVM extended attributes:
[ 0.663804] evm: security.selinux
[ 0.663807] evm: security.SMACK64 (disabled)
[ 0.663810] evm: security.SMACK64EXEC (disabled)
[ 0.663812] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.663815] evm: security.SMACK64MMAP (disabled)
[ 0.663817] evm: security.apparmor
[ 0.663819] evm: security.ima
[ 0.663821] evm: security.capability
[ 0.663823] evm: HMAC attrs: 0x1
[ 0.666697] RAS: Correctable Errors collector initialized.
[ 0.706904] clk: Disabling unused clocks
[ 0.706909] PM: genpd: Disabling unused power domains
[ 0.709042] Freeing unused decrypted memory: 2028K
[ 0.709890] Freeing unused kernel image (initmem) memory: 4148K
[ 0.710084] Write protecting the kernel read-only data: 28672k
[ 0.710850] Freeing unused kernel image (rodata/data gap) memory: 508K
[ 0.756561] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.756563] x86/mm: Checking user space page tables
[ 0.797846] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.797852] Run /init as init process
[ 0.797857] with arguments:
[ 0.797861] /init
[ 0.797862] with environment:
[ 0.797864] HOME=/
[ 0.797865] TERM=linux
[ 0.797866] BOOT_IMAGE=/vmlinuz-6.12.30-amd64
[ 0.981395] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found
[ 1.005491] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 1.008263] cryptd: max_cpu_qlen set to 1000
[ 1.024199] ACPI: battery: Slot [BAT0] (battery present)
[ 1.029699] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1.029763] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.034814] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 1.035609] platform idma64.0: Adding to iommu group 14
[ 1.035951] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 1.036707] platform i2c_designware.0: Adding to iommu group 15
[ 1.037471] AES CTR mode by8 optimization enabled
[ 1.066918] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 1.067091] platform idma64.1: Adding to iommu group 16
[ 1.067253] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 1.067279] platform i2c_designware.1: Adding to iommu group 17
[ 1.070085] ACPI: bus type drm_connector registered
[ 1.079914] ACPI: bus type USB registered
[ 1.079947] usbcore: registered new interface driver usbfs
[ 1.079956] usbcore: registered new interface driver hub
[ 1.079965] usbcore: registered new device driver usb
[ 1.084361] iTCO_vendor_support: vendor-support=0
[ 1.093531] nvme nvme0: pci function 0000:6e:00.0
[ 1.093733] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 1.094060] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.095322] hid: raw HID events driver (C) Jiri Kosina
[ 1.100501] nvme nvme0: D3 entry latency set to 8 seconds
[ 1.109178] nvme nvme0: 8/0/0 default/read/poll queues
[ 1.113661] nvme0n1: p1 p2 p3 p4
[ 1.118397] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.118411] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.119572] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 1.125055] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.125062] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.125067] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.125124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.125127] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.125129] usb usb1: Product: xHCI Host Controller
[ 1.125131] usb usb1: Manufacturer: Linux 6.12.30-amd64 xhci-hcd
[ 1.125132] usb usb1: SerialNumber: 0000:00:14.0
[ 1.125316] hub 1-0:1.0: USB hub found
[ 1.125333] hub 1-0:1.0: 12 ports detected
[ 1.126785] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 1.126805] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.126807] usb usb2: Product: xHCI Host Controller
[ 1.126808] usb usb2: Manufacturer: Linux 6.12.30-amd64 xhci-hcd
[ 1.126810] usb usb2: SerialNumber: 0000:00:14.0
[ 1.126937] hub 2-0:1.0: USB hub found
[ 1.126948] hub 2-0:1.0: 6 ports detected
[ 1.213528] i2c_hid_acpi i2c-ELAN24EE:00: i2c_hid_get_input: IRQ triggered but there's no data
[ 1.281084] input: ELAN24EE:00 04F3:24EE Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input3
[ 1.281192] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input4
[ 1.281211] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input5
[ 1.281249] hid-generic 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 1.281708] input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input7
[ 1.281751] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input8
[ 1.281807] hid-generic 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 1.294338] tsc: Refined TSC clocksource calibration: 1896.000 MHz
[ 1.294345] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a8d32ce31, max_idle_ns: 881590731004 ns
[ 1.294409] clocksource: Switched to clocksource tsc
[ 1.325330] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input10
[ 1.325519] input: ELAN24EE:00 04F3:24EE UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input11
[ 1.325586] input: ELAN24EE:00 04F3:24EE UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input12
[ 1.325722] hid-multitouch 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 1.374347] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.557735] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
[ 1.557742] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.557744] usb 1-5: Product: Integrated_Webcam_HD
[ 1.557746] usb 1-5: Manufacturer: CN0FFMHCLOG0087LB412A01
[ 1.557748] usb 1-5: SerialNumber: 200901010001
[ 1.558914] input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input14
[ 1.559001] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input15
[ 1.559078] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 1.619402] tpm tpm0: auth session is active
[ 1.682298] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.819616] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[ 1.819619] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.938372] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[ 2.075901] usb 1-10: New USB device found, idVendor=27c6, idProduct=5385, bcdDevice= 1.00
[ 2.075909] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.075912] usb 1-10: Product: Goodix Fingerprint Device
[ 2.075915] usb 1-10: Manufacturer: HTMicroelectronics
[ 2.075917] usb 1-10: SerialNumber: HTK32
[ 2.129895] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 2.130144] device-mapper: uevent: version 1.0.3
[ 2.130221] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 8.365938] PM: Image not found (code -22)
[ 8.575420] EXT4-fs (dm-0): orphan cleanup on readonly fs
[ 8.575770] EXT4-fs (dm-0): mounted filesystem 118784b1-3045-408c-a9be-2a72336ae938 ro with ordered data mode. Quota mode: none.
[ 8.628479] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 8.685667] systemd[1]: Inserted module 'autofs4'
[ 8.871515] systemd[1]: systemd 258~rc2-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 8.871522] systemd[1]: Detected architecture x86-64.
[ 8.873919] systemd[1]: Hostname set to <glinka>.
[ 9.048238] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 9.094111] systemd-sysv-generator[644]: SysV service '/etc/init.d/isc-dhcp-server' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 9.094118] systemd-sysv-generator[644]: Please update package to include a native systemd unit file.
[ 9.094121] systemd-sysv-generator[644]: ! This compatibility logic is deprecated, expect removal soon. !
[ 9.222380] systemd[1]: Queued start job for default target graphical.target.
[ 9.254316] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 9.255388] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 9.256269] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 9.256905] systemd[1]: Created slice user.slice - User and Session Slice.
[ 9.257123] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 9.257264] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 9.257853] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 9.257923] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 9.257941] systemd[1]: Expecting device dev-disk-by\x2duuid-22D6\x2d7D2A.device - /dev/disk/by-uuid/22D6-7D2A...
[ 9.257958] systemd[1]: Expecting device dev-nvme0n1p2.device - /dev/nvme0n1p2...
[ 9.258012] systemd[1]: Reached target imports.target - Image Downloads.
[ 9.258088] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 9.258126] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 9.258168] systemd[1]: Reached target slices.target - Slice Units.
[ 9.260879] systemd[1]: Listening on systemd-ask-password.socket - Query the User Interactively for a Password.
[ 9.263867] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 9.265632] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 9.268071] systemd[1]: Listening on systemd-factory-reset.socket - Factory Reset Management.
[ 9.268353] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 9.268625] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 9.268759] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.268808] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.269006] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 9.269150] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 9.269305] systemd[1]: Listening on systemd-udevd-varlink.socket - udev Varlink Socket.
[ 9.271784] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 9.273799] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 9.276074] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 9.278390] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 9.281687] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 9.284158] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 9.286884] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 9.286974] systemd[1]: modprobe@drm.service - Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm).
[ 9.289577] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 9.289667] systemd[1]: modprobe@fuse.service - Load Kernel Module fuse was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!fuse).
[ 9.291907] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 9.292131] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 9.292222] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 9.295220] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 9.298890] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 9.298927] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.301653] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 9.301799] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.303681] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 9.305460] pstore: Using crash dump compression: deflate
[ 9.306122] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 9.331588] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 9.333418] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 9.334898] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 9.336338] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 9.340357] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 9.345475] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 9.349824] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 9.353114] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 9.355389] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 9.366601] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 9.368930] pstore: Registered efi_pstore as persistent store backend
[ 9.370358] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 9.371835] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 9.372161] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 9.379637] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 9.381330] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 9.384695] lp: driver loaded but no devices found
[ 9.386528] systemd-journald[657]: Collecting audit messages is disabled.
[ 9.391802] ppdev: user-space parallel port driver
[ 9.398845] i2c_dev: i2c /dev entries driver
[ 9.399909] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 9.417011] EXT4-fs (dm-0): re-mounted 118784b1-3045-408c-a9be-2a72336ae938 r/w. Quota mode: none.
[ 9.418497] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 9.418867] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 9.418931] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 9.420132] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 9.420199] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 9.422947] systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization...
[ 9.424243] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 9.424280] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.424817] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 9.426571] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 9.482813] systemd[1]: Started systemd-journald.service - Journal Service.
[ 9.503242] systemd-journald[657]: Received client request to flush runtime journal.
[ 9.815483] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input17
[ 9.832154] ACPI: button: Lid Switch [LID0]
[ 9.837101] ACPI: AC: AC Adapter [AC] (off-line)
[ 9.839375] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input18
[ 9.842566] ACPI: button: Power Button [PBTN]
[ 9.842654] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input19
[ 9.842720] Consider using thermal netlink events interface
[ 9.842895] ACPI: button: Sleep Button [SBTN]
[ 9.844385] input: Intel HID events as /devices/platform/INT33D5:00/input/input20
[ 9.846662] intel-hid INT33D5:00: platform supports 5 button array
[ 9.850255] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input22
[ 9.850267] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input21
[ 9.850802] ACPI: button: Power Button [PWRF]
[ 9.853411] intel_pmc_core INT33A1:00: initialized
[ 9.853611] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 9.900210] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 9.924373] intel_rapl_common: Found RAPL domain package
[ 9.924379] intel_rapl_common: Found RAPL domain dram
[ 10.028032] input: PC Speaker as /devices/platform/pcspkr/input/input23
[ 10.041778] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 10.079886] mc: Linux media interface: v0.10
[ 10.096558] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 10.167979] videodev: Linux video capture interface: v2.00
[ 10.198664] cdc_acm 1-10:1.0: ttyACM0: USB ACM device
[ 10.198711] usbcore: registered new interface driver cdc_acm
[ 10.198713] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 10.202464] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input24
[ 10.267958] Bluetooth: Core ver 2.22
[ 10.268005] NET: Registered PF_BLUETOOTH protocol family
[ 10.268006] Bluetooth: HCI device and connection manager initialized
[ 10.268011] Bluetooth: HCI socket layer initialized
[ 10.268013] Bluetooth: L2CAP socket layer initialized
[ 10.268017] Bluetooth: SCO socket layer initialized
[ 10.323506] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 10.323770] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 10.324011] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 10.324255] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 10.324488] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 10.335649] ACPI: battery: new extension: Dell Primary Battery Extension
[ 10.345529] intel_rapl_common: Found RAPL domain package
[ 10.345537] intel_rapl_common: Found RAPL domain core
[ 10.345538] intel_rapl_common: Found RAPL domain uncore
[ 10.345540] intel_rapl_common: Found RAPL domain dram
[ 10.345541] intel_rapl_common: Found RAPL domain psys
[ 10.345594] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 10.345598] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 10.345600] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 10.345602] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 10.345603] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 10.345604] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 10.363281] usbcore: registered new interface driver btusb
[ 10.364928] usb 1-5: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
[ 10.366364] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 10.367166] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 10.367389] Bluetooth: hci0: Device revision is 16
[ 10.367393] Bluetooth: hci0: Secure boot is enabled
[ 10.367394] Bluetooth: hci0: OTP lock is enabled
[ 10.367396] Bluetooth: hci0: API lock is enabled
[ 10.367398] Bluetooth: hci0: Debug lock is disabled
[ 10.367399] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 10.373557] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 10.377811] usb 1-5: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
[ 10.378211] EXT4-fs (nvme0n1p2): mounted filesystem ce715364-82d6-4b2d-8883-63f17a6b61e8 r/w with ordered data mode. Quota mode: none.
[ 10.380419] usbcore: registered new interface driver uvcvideo
[ 10.837510] Intel(R) Wireless WiFi driver for Linux
[ 10.837928] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 10.839199] i915 0000:00:02.0: [drm] Found KABYLAKE (device ID 5917) display version 9.00 stepping C0
[ 10.841614] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 10.841727] iwlwifi 0000:02:00.0: Detected crf-id 0xbadcafe, cnv-id 0x10 wfpm id 0x80000000
[ 10.841828] Console: switching to colour dummy device 80x25
[ 10.841884] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 10.841907] iwlwifi 0000:02:00.0: PCI dev 24fd/8050, rev=0x230, rfid=0xd55555d5
[ 10.841913] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265
[ 10.841949] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 10.848787] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.850906] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 10.905517] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 10.910093] iwlwifi 0000:02:00.0: loaded firmware version 36.ca7b901d.0 8265-36.ucode op_mode iwlmvm
[ 10.921223] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 10.926340] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.927142] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input25
[ 10.962395] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 10.967152] fbcon: i915drmfb (fb0) is primary device
[ 10.970698] Console: switching to colour frame buffer device 240x67
[ 10.997259] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 11.013075] audit: type=1400 audit(1755069484.011:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=865 comm="apparmor_parser"
[ 11.013082] audit: type=1400 audit(1755069484.011:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=859 comm="apparmor_parser"
[ 11.013898] audit: type=1400 audit(1755069484.011:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=863 comm="apparmor_parser"
[ 11.013958] audit: type=1400 audit(1755069484.011:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=861 comm="apparmor_parser"
[ 11.013976] audit: type=1400 audit(1755069484.011:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=864 comm="apparmor_parser"
[ 11.014800] audit: type=1400 audit(1755069484.015:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=860 comm="apparmor_parser"
[ 11.015141] audit: type=1400 audit(1755069484.015:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=858 comm="apparmor_parser"
[ 11.017581] audit: type=1400 audit(1755069484.015:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=871 comm="apparmor_parser"
[ 11.017587] audit: type=1400 audit(1755069484.015:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="vscode" pid=879 comm="apparmor_parser"
[ 11.017590] audit: type=1400 audit(1755069484.015:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=878 comm="apparmor_parser"
[ 11.120028] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 11.120041] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.120045] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 11.120049] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.120051] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.120054] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.120057] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 11.120059] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
[ 11.252762] iwlwifi 0000:02:00.0: base HW address: 38:ba:f8:94:0a:e8, OTP minor version: 0x0
[ 11.265426] Process accounting resumed
[ 11.266776] nvme nvme0: using unchecked data buffer
[ 11.267394] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.267398] Bluetooth: BNEP filters: protocol multicast
[ 11.267403] Bluetooth: BNEP socket layer initialized
[ 11.362459] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 11.372639] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 11.375513] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 11.437948] block nvme0n1: No UUID available providing old NGUID
[ 11.562638] NET: Registered PF_QIPCRTR protocol family
[ 11.575065] Initializing XFRM netlink socket
[ 11.720100] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[ 11.733757] IPsec XFRM device driver
[ 11.897445] Bluetooth: hci0: Waiting for firmware download to complete
[ 11.897454] Bluetooth: hci0: Firmware loaded in 1488175 usecs
[ 11.897611] Bluetooth: hci0: Waiting for device to boot
[ 11.910601] Bluetooth: hci0: Device booted in 12793 usecs
[ 11.918659] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 11.921466] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 11.922539] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021
[ 11.924569] Bluetooth: hci0: Reading supported features failed (-16)
[ 11.924621] Bluetooth: hci0: Error reading debug features
[ 11.924658] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 11.943829] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 11.943882] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 11.943932] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 11.943978] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 11.976618] Bluetooth: MGMT ver 1.23
[ 11.983201] NET: Registered PF_ALG protocol family
[ 12.028883] Bluetooth: RFCOMM TTY layer initialized
[ 12.028893] Bluetooth: RFCOMM socket layer initialized
[ 12.028901] Bluetooth: RFCOMM ver 1.11
[ 14.205322] rfkill: input handler disabled
[ 14.646307] psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5
[ 15.126343] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 19.398436] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2
[ 19.602307] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 31.201997] rfkill: input handler enabled
[ 34.485251] rfkill: input handler disabled
[ 36.995319] SCSI subsystem initialized
[ 43.551699] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Upstream Port
[ 43.551768] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 43.551798] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 43.551833] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 43.551871] pci 0000:03:00.0: enabling Extended Tags
[ 43.552091] pci 0000:03:00.0: supports D1 D2
[ 43.552093] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 43.552860] pci 0000:03:00.0: Adding to iommu group 18
[ 43.553246] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 43.553307] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 43.553323] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 43.553365] pci 0000:04:00.0: enabling Extended Tags
[ 43.553600] pci 0000:04:00.0: supports D1 D2
[ 43.553605] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 43.554603] pci 0000:04:00.0: Adding to iommu group 19
[ 43.554763] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 43.554822] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 43.554844] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 43.554873] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 43.554906] pci 0000:04:01.0: enabling Extended Tags
[ 43.555300] pci 0000:04:01.0: supports D1 D2
[ 43.555305] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 43.555663] pci 0000:04:01.0: Adding to iommu group 20
[ 43.555986] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 43.556040] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 43.556055] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 43.556092] pci 0000:04:02.0: enabling Extended Tags
[ 43.556273] pci 0000:04:02.0: supports D1 D2
[ 43.556277] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 43.556566] pci 0000:04:02.0: Adding to iommu group 21
[ 43.556732] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 43.556775] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 43.556789] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 43.556805] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 43.556825] pci 0000:04:04.0: enabling Extended Tags
[ 43.556943] pci 0000:04:04.0: supports D1 D2
[ 43.556946] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 43.557467] pci 0000:04:04.0: Adding to iommu group 22
[ 43.557686] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 43.558522] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 43.558718] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 43.560485] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint
[ 43.560522] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff]
[ 43.560619] pci 0000:39:00.0: enabling Extended Tags
[ 43.561396] pci 0000:39:00.0: supports D1 D2
[ 43.561400] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 43.561539] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:04:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 43.561865] pci 0000:39:00.0: Adding to iommu group 21
[ 43.561967] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 43.562146] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 43.562273] pci_bus 0000:04: Allocating resources
[ 43.562313] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 43.562320] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 43.562323] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 43.562328] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 43.562332] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 43.562337] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 43.562341] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 43.562346] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 43.562349] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 43.562359] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 43.562363] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 43.562367] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.562371] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 43.562375] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.562379] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 43.562382] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.562386] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 43.562391] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.562394] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 43.562400] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 43.562404] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 43.562408] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.562412] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 43.562416] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.562419] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 43.562424] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 43.562432] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 43.562446] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 43.562453] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 43.562459] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 43.562469] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 43.562478] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 43.562493] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 43.562505] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 43.562513] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 43.562527] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 43.562538] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 43.562546] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 43.569776] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 43.569787] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 43.629346] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 43.688641] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 43.688652] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 43.688659] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 43.689053] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 43.689059] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 43.689062] usb usb3: Product: xHCI Host Controller
[ 43.689065] usb usb3: Manufacturer: Linux 6.12.30-amd64 xhci-hcd
[ 43.689068] usb usb3: SerialNumber: 0000:39:00.0
[ 43.692048] hub 3-0:1.0: USB hub found
[ 43.692068] hub 3-0:1.0: 2 ports detected
[ 43.693303] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 43.693309] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 43.693312] usb usb4: Product: xHCI Host Controller
[ 43.693314] usb usb4: Manufacturer: Linux 6.12.30-amd64 xhci-hcd
[ 43.693316] usb usb4: SerialNumber: 0000:39:00.0
[ 43.693761] hub 4-0:1.0: USB hub found
[ 43.693783] hub 4-0:1.0: 2 ports detected
[ 43.722975] pci_bus 0000:04: Allocating resources
[ 43.723005] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 43.723012] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 43.723017] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 43.723023] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 43.723028] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 43.723035] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 43.723039] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 43.723044] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 43.723047] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 43.723056] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 43.723060] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 43.723064] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.723068] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 43.723072] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.723075] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 43.723079] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.723083] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 43.723088] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.723092] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 43.723096] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 43.723100] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 43.723103] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.723106] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 43.723110] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 43.723114] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 43.942317] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 44.092019] usb 3-2: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 44.092030] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 44.092035] usb 3-2: Product: USB2.0 Hub
[ 44.092039] usb 3-2: Manufacturer: VIA Labs, Inc.
[ 44.092042] usb 3-2: SerialNumber: 000000000
[ 44.094889] hub 3-2:1.0: USB hub found
[ 44.094985] hub 3-2:1.0: 5 ports detected
[ 44.822316] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
[ 44.968222] usb 3-2.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 44.968234] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 44.968239] usb 3-2.1: Product: USB2.0 Hub
[ 44.968242] usb 3-2.1: Manufacturer: VIA Labs, Inc.
[ 44.968246] usb 3-2.1: SerialNumber: 000000000
[ 44.969226] hub 3-2.1:1.0: USB hub found
[ 44.969326] hub 3-2.1:1.0: 4 ports detected
[ 45.346359] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[ 45.493022] usb 3-2.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 45.493031] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 45.493035] usb 3-2.4: Product: Mass Storage Device
[ 45.493045] usb 3-2.4: Manufacturer: Generic
[ 45.493047] usb 3-2.4: SerialNumber: 158F84688461
[ 45.547462] usb-storage 3-2.4:1.0: USB Mass Storage device detected
[ 45.547689] scsi host0: usb-storage 3-2.4:1.0
[ 45.547921] usbcore: registered new interface driver usb-storage
[ 45.555830] usbcore: registered new interface driver uas
[ 45.638316] usb 3-2.1.3: new high-speed USB device number 5 using xhci_hcd
[ 45.731235] usb 3-2.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 45.731245] usb 3-2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 45.731249] usb 3-2.1.3: Product: USB 10/100/1000 LAN
[ 45.731252] usb 3-2.1.3: Manufacturer: Realtek
[ 45.731254] usb 3-2.1.3: SerialNumber: 000001
[ 45.820392] usbcore: registered new device driver r8152-cfgselector
[ 45.894682] r8152-cfgselector 3-2.1.3: reset high-speed USB device number 5 using xhci_hcd
[ 46.036498] r8152 3-2.1.3:1.0 eth0: v1.12.13
[ 46.036589] usbcore: registered new interface driver r8152
[ 46.054073] usbcore: registered new interface driver cdc_ether
[ 46.057339] usbcore: registered new interface driver r8153_ecm
[ 46.191100] r8152 3-2.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 46.579924] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 46.581365] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 46.582426] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 46.582827] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 46.583219] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 46.583530] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 46.610751] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 46.611338] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 48.750378] usb 3-2.5: new high-speed USB device number 6 using xhci_hcd
[ 48.839739] usb 3-2.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 48.839749] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 48.839753] usb 3-2.5: Product: USB Billboard Device
[ 48.839757] usb 3-2.5: Manufacturer: VIA Labs, Inc.
[ 48.839759] usb 3-2.5: SerialNumber: 0000000000000001
[ 49.371302] r8152 3-2.1.3:1.0 enx00e04ceb9e75: carrier on
[ 54.758421] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 54.803439] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 54.803455] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 54.803462] usb 4-2: Product: USB3.0 Hub
[ 54.803468] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 54.803473] usb 4-2: SerialNumber: 000000000
[ 54.806065] hub 4-2:1.0: USB hub found
[ 54.806201] hub 4-2:1.0: 4 ports detected
[ 55.454987] usb 4-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 55.501108] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 55.501127] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 55.501135] usb 4-2.1: Product: USB3.0 Hub
[ 55.501142] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 55.501148] usb 4-2.1: SerialNumber: 000000000
[ 55.510020] usb 4-2.1: Enable of device-initiated U1 failed.
[ 55.510037] usb 4-2.1: Failed to set U1 timeout to 0x0,error code -19
[ 55.510121] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -19
[ 55.510286] hub 4-2.1:1.0: USB hub found
[ 55.531548] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 55.539118] usb 4-2.1: Failed to suspend device, error -19
[ 59.614753] usb 4-2: USB disconnect, device number 2
[ 59.614769] usb 4-2.1: USB disconnect, device number 3
[ 72.252258] r8152 3-2.1.3:1.0 enx00e04ceb9e75: entered promiscuous mode
[ 72.253088] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[-- Attachment #3: 20250813--dell-xps-13-9370--linux-6.12.38-messages.txt --]
[-- Type: text/plain, Size: 117581 bytes --]
[ 0.000000] Linux version 6.12.38+deb13-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.38-1 (2025-07-16)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.12.38+deb13-amd64 root=UUID=118784b1-3045-408c-a9be-2a72336ae938 ro quiet log_buf_len=8M
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002c6c2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000002c6c3000-0x000000002c6c3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000002c6c4000-0x000000002c6c4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000002c6c5000-0x000000003dceffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003dcf0000-0x000000003e0affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003e0b0000-0x000000003e0fcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003e0fd000-0x000000003e7b4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003e7b5000-0x000000003fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002ae7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x1faf8018-0x1fb08057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001faf8017] usable
[ 0.000000] reserve setup_data: [mem 0x000000001faf8018-0x000000001fb08057] usable
[ 0.000000] reserve setup_data: [mem 0x000000001fb08058-0x000000002c6c2fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000002c6c3000-0x000000002c6c3fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000002c6c4000-0x000000002c6c4fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000002c6c5000-0x000000003dceffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000003dcf0000-0x000000003e0affff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000003e0b0000-0x000000003e0fcfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000003e0fd000-0x000000003e7b4fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000003e7b5000-0x000000003fffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000003ffff000-0x000000003fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000048000000-0x0000000048dfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000002ae7fffff] usable
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x3e0c0000 ACPI 2.0=0x3e0c0000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x3e756000 ESRT=0x3fdc1698 MEMATTR=0x3b1a7018 INITRD=0x2c7b6d98 TPMEventLog=0x3e0b7018
[ 0.000000] efi: Remove mem37: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem40: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem41: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9370/0RMYH9, BIOS 1.21.0 07/06/2022
[ 0.000000] DMI: Memory slots populated: 2/2
[ 0.000000] tsc: Detected 1900.000 MHz processor
[ 0.000000] tsc: Detected 1899.950 MHz TSC
[ 0.000815] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000817] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000826] last_pfn = 0x2ae800 max_arch_pfn = 0x400000000
[ 0.000829] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000831] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001124] last_pfn = 0x48e00 max_arch_pfn = 0x400000000
[ 0.007403] esrt: Reserving ESRT space from 0x000000003fdc1698 to 0x000000003fdc16d0.
[ 0.007408] Using GB pages for direct mapping
[ 0.014173] printk: log_buf_len: 8388608 bytes
[ 0.014174] printk: early log buf free: 125352(95%)
[ 0.014175] RAMDISK: [mem 0x20609000-0x238aefff]
[ 0.014541] ACPI: Early table checksum verification disabled
[ 0.014543] ACPI: RSDP 0x000000003E0C0000 000024 (v02 DELL )
[ 0.014547] ACPI: XSDT 0x000000003E0C00C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.014551] ACPI: FACP 0x000000003E0E69D0 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.014556] ACPI: DSDT 0x000000003E0C0260 02676C (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.014558] ACPI: FACS 0x000000003E7B2180 000040
[ 0.014560] ACPI: APIC 0x000000003E0E6AE0 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.014563] ACPI: FPDT 0x000000003E0E6BA0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.014565] ACPI: FIDT 0x000000003E0E6BE8 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.014567] ACPI: MCFG 0x000000003E0E6C98 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.014570] ACPI: HPET 0x000000003E0E6CD8 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.014572] ACPI: SSDT 0x000000003E0E6D10 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.014575] ACPI: BOOT 0x000000003E0E7070 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.014577] ACPI: SSDT 0x000000003E0E7098 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.014579] ACPI: HPET 0x000000003E0E8378 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.014582] ACPI: SSDT 0x000000003E0E83B0 000CEF (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.014584] ACPI: UEFI 0x000000003E0E90A0 000042 (v01 00000000 00000000)
[ 0.014587] ACPI: SSDT 0x000000003E0E90E8 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.014589] ACPI: LPIT 0x000000003E0EA898 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.014591] ACPI: SSDT 0x000000003E0EA930 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.014594] ACPI: SSDT 0x000000003E0EAA98 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.014596] ACPI: SSDT 0x000000003E0EAD38 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.014599] ACPI: SSDT 0x000000003E0EDD40 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.014601] ACPI: DBGP 0x000000003E0EE258 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.014603] ACPI: DBG2 0x000000003E0EE290 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.014606] ACPI: SSDT 0x000000003E0EE2E8 000801 (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.014608] ACPI: SSDT 0x000000003E0EEAF0 00CFC3 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.014611] ACPI: MSDM 0x000000003E0FBAB8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.014613] ACPI: SLIC 0x000000003E0FBB10 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.014615] ACPI: NHLT 0x000000003E0FBC88 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.014618] ACPI: BGRT 0x000000003E0FBCB8 000038 (v00 01072009 AMI 00010013)
[ 0.014620] ACPI: TPM2 0x000000003E0FBCF0 000034 (v03 DELL CBX3 00000001 AMI 00000000)
[ 0.014622] ACPI: ASF! 0x000000003E0FBD28 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.014626] ACPI: DMAR 0x000000003E0FBDC8 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.014628] ACPI: Reserving FACP table memory at [mem 0x3e0e69d0-0x3e0e6adb]
[ 0.014629] ACPI: Reserving DSDT table memory at [mem 0x3e0c0260-0x3e0e69cb]
[ 0.014630] ACPI: Reserving FACS table memory at [mem 0x3e7b2180-0x3e7b21bf]
[ 0.014630] ACPI: Reserving APIC table memory at [mem 0x3e0e6ae0-0x3e0e6b9b]
[ 0.014631] ACPI: Reserving FPDT table memory at [mem 0x3e0e6ba0-0x3e0e6be3]
[ 0.014632] ACPI: Reserving FIDT table memory at [mem 0x3e0e6be8-0x3e0e6c93]
[ 0.014632] ACPI: Reserving MCFG table memory at [mem 0x3e0e6c98-0x3e0e6cd3]
[ 0.014633] ACPI: Reserving HPET table memory at [mem 0x3e0e6cd8-0x3e0e6d0f]
[ 0.014633] ACPI: Reserving SSDT table memory at [mem 0x3e0e6d10-0x3e0e7068]
[ 0.014634] ACPI: Reserving BOOT table memory at [mem 0x3e0e7070-0x3e0e7097]
[ 0.014635] ACPI: Reserving SSDT table memory at [mem 0x3e0e7098-0x3e0e8375]
[ 0.014635] ACPI: Reserving HPET table memory at [mem 0x3e0e8378-0x3e0e83af]
[ 0.014636] ACPI: Reserving SSDT table memory at [mem 0x3e0e83b0-0x3e0e909e]
[ 0.014636] ACPI: Reserving UEFI table memory at [mem 0x3e0e90a0-0x3e0e90e1]
[ 0.014637] ACPI: Reserving SSDT table memory at [mem 0x3e0e90e8-0x3e0ea895]
[ 0.014638] ACPI: Reserving LPIT table memory at [mem 0x3e0ea898-0x3e0ea92b]
[ 0.014638] ACPI: Reserving SSDT table memory at [mem 0x3e0ea930-0x3e0eaa90]
[ 0.014639] ACPI: Reserving SSDT table memory at [mem 0x3e0eaa98-0x3e0ead36]
[ 0.014639] ACPI: Reserving SSDT table memory at [mem 0x3e0ead38-0x3e0edd39]
[ 0.014640] ACPI: Reserving SSDT table memory at [mem 0x3e0edd40-0x3e0ee256]
[ 0.014641] ACPI: Reserving DBGP table memory at [mem 0x3e0ee258-0x3e0ee28b]
[ 0.014641] ACPI: Reserving DBG2 table memory at [mem 0x3e0ee290-0x3e0ee2e3]
[ 0.014642] ACPI: Reserving SSDT table memory at [mem 0x3e0ee2e8-0x3e0eeae8]
[ 0.014642] ACPI: Reserving SSDT table memory at [mem 0x3e0eeaf0-0x3e0fbab2]
[ 0.014643] ACPI: Reserving MSDM table memory at [mem 0x3e0fbab8-0x3e0fbb0c]
[ 0.014644] ACPI: Reserving SLIC table memory at [mem 0x3e0fbb10-0x3e0fbc85]
[ 0.014644] ACPI: Reserving NHLT table memory at [mem 0x3e0fbc88-0x3e0fbcb4]
[ 0.014645] ACPI: Reserving BGRT table memory at [mem 0x3e0fbcb8-0x3e0fbcef]
[ 0.014646] ACPI: Reserving TPM2 table memory at [mem 0x3e0fbcf0-0x3e0fbd23]
[ 0.014646] ACPI: Reserving ASF! table memory at [mem 0x3e0fbd28-0x3e0fbdc7]
[ 0.014647] ACPI: Reserving DMAR table memory at [mem 0x3e0fbdc8-0x3e0fbeb7]
[ 0.014767] No NUMA configuration found
[ 0.014767] Faking a node at [mem 0x0000000000000000-0x00000002ae7fffff]
[ 0.014775] NODE_DATA(0) allocated [mem 0x2ac3d5680-0x2ac3fffff]
[ 0.014954] Zone ranges:
[ 0.014955] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014956] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014958] Normal [mem 0x0000000100000000-0x00000002ae7fffff]
[ 0.014959] Device empty
[ 0.014959] Movable zone start for each node
[ 0.014961] Early memory node ranges
[ 0.014962] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.014963] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.014964] node 0: [mem 0x0000000000100000-0x000000002c6c2fff]
[ 0.014964] node 0: [mem 0x000000002c6c5000-0x000000003dceffff]
[ 0.014965] node 0: [mem 0x000000003ffff000-0x000000003fffffff]
[ 0.014966] node 0: [mem 0x0000000048000000-0x0000000048dfffff]
[ 0.014966] node 0: [mem 0x0000000100000000-0x00000002ae7fffff]
[ 0.014968] Initmem setup node 0 [mem 0x0000000000001000-0x00000002ae7fffff]
[ 0.014972] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.014974] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.015002] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.016488] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.016568] On node 0, zone DMA32: 8975 pages in unavailable ranges
[ 0.017058] On node 0, zone Normal: 29184 pages in unavailable ranges
[ 0.017108] On node 0, zone Normal: 6144 pages in unavailable ranges
[ 0.017116] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[ 0.017485] ACPI: PM-Timer IO Port: 0x1808
[ 0.017492] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.017493] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.017494] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.017495] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.017495] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.017496] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.017496] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.017497] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.017523] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.017526] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.017527] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.017531] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.017531] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.017537] e820: update [mem 0x3a6ab000-0x3a71efff] usable ==> reserved
[ 0.017548] TSC deadline timer available
[ 0.017551] CPU topo: Max. logical packages: 1
[ 0.017552] CPU topo: Max. logical dies: 1
[ 0.017553] CPU topo: Max. dies per package: 1
[ 0.017556] CPU topo: Max. threads per core: 2
[ 0.017556] CPU topo: Num. cores per package: 4
[ 0.017557] CPU topo: Num. threads per package: 8
[ 0.017557] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[ 0.017574] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.017576] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.017577] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.017578] PM: hibernation: Registered nosave memory: [mem 0x2c6c3000-0x2c6c4fff]
[ 0.017580] PM: hibernation: Registered nosave memory: [mem 0x3a6ab000-0x3a71efff]
[ 0.017581] PM: hibernation: Registered nosave memory: [mem 0x3dcf0000-0x3fffefff]
[ 0.017583] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x47ffffff]
[ 0.017584] PM: hibernation: Registered nosave memory: [mem 0x48e00000-0xffffffff]
[ 0.017585] [mem 0x4f800000-0xfdffffff] available for PCI devices
[ 0.017586] Booting paravirtualized kernel on bare hardware
[ 0.017588] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.022261] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.022766] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[ 0.022771] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[ 0.022773] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
[ 0.022790] Kernel command line: BOOT_IMAGE=/vmlinuz-6.12.38+deb13-amd64 root=UUID=118784b1-3045-408c-a9be-2a72336ae938 ro quiet log_buf_len=8M
[ 0.022845] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.12.38+deb13-amd64", will be passed to user space.
[ 0.022869] random: crng init done
[ 0.023660] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.024051] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.024166] Fallback order for Node 0: 0
[ 0.024169] Built 1 zonelists, mobility grouping on. Total pages: 2019979
[ 0.024169] Policy zone: Normal
[ 0.024176] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.024182] software IO TLB: area num 8.
[ 0.041072] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.041093] Kernel/User page tables isolation: enabled
[ 0.041121] ftrace: allocating 45713 entries in 179 pages
[ 0.048621] ftrace: allocated 179 pages with 5 groups
[ 0.049238] Dynamic Preempt: voluntary
[ 0.049288] rcu: Preemptible hierarchical RCU implementation.
[ 0.049288] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.049289] Trampoline variant of Tasks RCU enabled.
[ 0.049290] Rude variant of Tasks RCU enabled.
[ 0.049290] Tracing variant of Tasks RCU enabled.
[ 0.049291] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.049291] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.049299] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.049300] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.049301] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.053552] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.053758] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.053949] spurious 8259A interrupt: IRQ7.
[ 0.053974] Console: colour dummy device 80x25
[ 0.053976] printk: legacy console [tty0] enabled
[ 0.054021] ACPI: Core revision 20240827
[ 0.054170] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.054203] APIC: Switch to symmetric I/O mode setup
[ 0.054205] DMAR: Host address width 39
[ 0.054206] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.054212] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.054214] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.054217] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.054219] DMAR: RMRR base: 0x0000003ddca000 end: 0x0000003dde9fff
[ 0.054220] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[ 0.054221] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.054222] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.054224] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.054225] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.054226] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.055864] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.055866] x2apic enabled
[ 0.055924] APIC: Switched APIC routing to: cluster x2apic
[ 0.059727] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x36c5f9386c6, max_idle_ns: 881590416379 ns
[ 0.059732] Calibrating delay loop (skipped), value calculated using timer frequency.. 3799.90 BogoMIPS (lpj=7599800)
[ 0.059768] CPU0: Thermal monitoring enabled (TM1)
[ 0.059807] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.059808] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4
[ 0.059812] process: using mwait in idle threads
[ 0.059814] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.059816] Spectre V2 : Mitigation: IBRS
[ 0.059817] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.059818] RETBleed: Mitigation: IBRS
[ 0.059819] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.059820] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.059821] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.059825] MDS: Mitigation: Clear CPU buffers
[ 0.059826] TAA: Mitigation: TSX disabled
[ 0.059827] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.059830] SRBDS: Mitigation: Microcode
[ 0.059834] GDS: Mitigation: Microcode
[ 0.059839] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.059840] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.059842] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.059843] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.059844] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.059845] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.059847] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.059849] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.059850] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.063730] Freeing SMP alternatives memory: 40K
[ 0.063730] pid_max: default: 32768 minimum: 301
[ 0.063730] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm
[ 0.063730] landlock: Up and running.
[ 0.063730] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.063730] AppArmor: AppArmor initialized
[ 0.063730] TOMOYO Linux initialized
[ 0.063730] LSM support for eBPF active
[ 0.063730] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.063730] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.063730] smpboot: CPU0: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[ 0.063730] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.063730] ... version: 4
[ 0.063730] ... bit width: 48
[ 0.063730] ... generic registers: 4
[ 0.063730] ... value mask: 0000ffffffffffff
[ 0.063730] ... max period: 00007fffffffffff
[ 0.063730] ... fixed-purpose events: 3
[ 0.063730] ... event mask: 000000070000000f
[ 0.063730] signal: max sigframe size: 2032
[ 0.063730] Estimated ratio of average max frequency by base frequency (times 1024): 1940
[ 0.063730] rcu: Hierarchical SRCU implementation.
[ 0.063730] rcu: Max phase no-delay instances is 1000.
[ 0.063730] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.063730] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.063730] smp: Bringing up secondary CPUs ...
[ 0.063730] smpboot: x86: Booting SMP configuration:
[ 0.063730] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.064302] Transient Scheduler Attacks: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.064302] Transient Scheduler Attacks: MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.064302] smp: Brought up 1 node, 8 CPUs
[ 0.064302] smpboot: Total of 8 processors activated (30399.20 BogoMIPS)
[ 0.077028] node 0 deferred pages initialised in 8ms
[ 0.077028] Memory: 7721996K/8079916K available (16384K kernel code, 2486K rwdata, 11788K rodata, 4148K init, 4952K bss, 345008K reserved, 0K cma-reserved)
[ 0.077028] devtmpfs: initialized
[ 0.077028] x86/mm: Memory block size: 128MB
[ 0.077028] ACPI: PM: Registering ACPI NVS region [mem 0x2c6c3000-0x2c6c3fff] (4096 bytes)
[ 0.077028] ACPI: PM: Registering ACPI NVS region [mem 0x3e0fd000-0x3e7b4fff] (7045120 bytes)
[ 0.077028] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.077028] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.077028] pinctrl core: initialized pinctrl subsystem
[ 0.079916] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.080093] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.080154] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.080203] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.080213] audit: initializing netlink subsys (disabled)
[ 0.080222] audit: type=2000 audit(1755069592.020:1): state=initialized audit_enabled=0 res=1
[ 0.080222] thermal_sys: Registered thermal governor 'fair_share'
[ 0.080222] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.080222] thermal_sys: Registered thermal governor 'step_wise'
[ 0.080222] thermal_sys: Registered thermal governor 'user_space'
[ 0.080222] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.080222] cpuidle: using governor ladder
[ 0.080222] cpuidle: using governor menu
[ 0.080222] Simple Boot Flag at 0x47 set to 0x80
[ 0.080222] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.080222] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.080222] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.080222] PCI: Using configuration type 1 for base access
[ 0.080222] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.080222] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.080222] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.080222] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.080222] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.080222] ACPI: Added _OSI(Module Device)
[ 0.080222] ACPI: Added _OSI(Processor Device)
[ 0.080222] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.112088] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.115966] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.120795] ACPI: Dynamic OEM Table Load:
[ 0.120795] ACPI: SSDT 0xFFFF91AE41A49C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.121337] ACPI: Dynamic OEM Table Load:
[ 0.121343] ACPI: SSDT 0xFFFF91AFC2870000 0005AC (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.123981] ACPI: Dynamic OEM Table Load:
[ 0.123988] ACPI: SSDT 0xFFFF91AE4019D000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.125344] ACPI: Dynamic OEM Table Load:
[ 0.125349] ACPI: SSDT 0xFFFF91AE41A4FC00 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.126273] ACPI: Dynamic OEM Table Load:
[ 0.126278] ACPI: SSDT 0xFFFF91AE41A4C800 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.130547] ACPI: EC: EC started
[ 0.130549] ACPI: EC: interrupt blocked
[ 0.138542] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.138545] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.138547] ACPI: Interpreter enabled
[ 0.138580] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.138581] ACPI: Using IOAPIC for interrupt routing
[ 0.138618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.138620] PCI: Using E820 reservations for host bridge windows
[ 0.139068] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.143937] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.165814] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.165820] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.165948] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[ 0.166178] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.166180] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.166915] PCI host bridge to bus 0000:00
[ 0.166918] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.166920] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.166922] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.166924] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window]
[ 0.166925] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.166927] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.166942] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 conventional PCI endpoint
[ 0.167011] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.167018] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[ 0.167023] pci 0000:00:02.0: BAR 2 [mem 0x50000000-0x5fffffff 64bit pref]
[ 0.167027] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.167040] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.167167] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[ 0.167175] pci 0000:00:04.0: BAR 0 [mem 0xdc320000-0xdc327fff 64bit]
[ 0.167406] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.167423] pci 0000:00:14.0: BAR 0 [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.167481] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.167893] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[ 0.167910] pci 0000:00:14.2: BAR 0 [mem 0xdc335000-0xdc335fff 64bit]
[ 0.168094] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[ 0.168153] pci 0000:00:15.0: BAR 0 [mem 0xdc334000-0xdc334fff 64bit]
[ 0.168783] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[ 0.168866] pci 0000:00:15.1: BAR 0 [mem 0xdc333000-0xdc333fff 64bit]
[ 0.169467] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.169487] pci 0000:00:16.0: BAR 0 [mem 0xdc332000-0xdc332fff 64bit]
[ 0.169552] pci 0000:00:16.0: PME# supported from D3hot
[ 0.169759] pci 0000:00:16.3: [8086:9d3d] type 00 class 0x070002 conventional PCI endpoint
[ 0.169771] pci 0000:00:16.3: BAR 0 [io 0xf060-0xf067]
[ 0.169776] pci 0000:00:16.3: BAR 1 [mem 0xdc331000-0xdc331fff]
[ 0.169892] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[ 0.169911] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.169919] pci 0000:00:1c.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.169969] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.169986] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 0.170319] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400 PCIe Root Port
[ 0.170338] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.170342] pci 0000:00:1c.2: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.170393] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.170411] pci 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled
[ 0.170738] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[ 0.170759] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.170764] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.170772] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.170823] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.170839] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 0.171180] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[ 0.171201] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.171206] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.171268] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.171288] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 0.171646] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 conventional PCI endpoint
[ 0.171902] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[ 0.171915] pci 0000:00:1f.2: BAR 0 [mem 0xdc32c000-0xdc32ffff]
[ 0.172104] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[ 0.172124] pci 0000:00:1f.3: BAR 0 [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.172147] pci 0000:00:1f.3: BAR 4 [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.172190] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.172679] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.172737] pci 0000:00:1f.4: BAR 0 [mem 0xdc330000-0xdc3300ff 64bit]
[ 0.172808] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 0.173104] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint
[ 0.173125] pci 0000:01:00.0: BAR 1 [mem 0xdc200000-0xdc200fff]
[ 0.173230] pci 0000:01:00.0: supports D1 D2
[ 0.173232] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.173403] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.173755] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000 PCIe Endpoint
[ 0.173837] pci 0000:02:00.0: BAR 0 [mem 0xdc100000-0xdc101fff 64bit]
[ 0.174110] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.175173] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.175254] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.175541] pci 0000:6e:00.0: [144d:a808] type 00 class 0x010802 PCIe Endpoint
[ 0.175560] pci 0000:6e:00.0: BAR 0 [mem 0xdc000000-0xdc003fff 64bit]
[ 0.175845] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.178038] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.178038] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.178038] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.178038] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.178038] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.178038] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.178038] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.178038] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.186557] Low-power S0 idle used by default for system suspend
[ 0.193672] ACPI: EC: interrupt unblocked
[ 0.193673] ACPI: EC: event unblocked
[ 0.193679] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.193680] ACPI: EC: GPE=0x6e
[ 0.193682] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.193684] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.193863] iommu: Default domain type: Translated
[ 0.193863] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.193863] pps_core: LinuxPPS API ver. 1 registered
[ 0.193863] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.193863] PTP clock support registered
[ 0.193863] EDAC MC: Ver: 3.0.0
[ 0.193863] efivars: Registered efivars operations
[ 0.193863] NetLabel: Initializing
[ 0.193863] NetLabel: domain hash size = 128
[ 0.193863] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.193863] NetLabel: unlabeled traffic allowed by default
[ 0.193863] PCI: Using ACPI for IRQ routing
[ 0.212336] PCI: pci_cache_line_size set to 64 bytes
[ 0.213295] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.213297] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.213298] e820: reserve RAM buffer [mem 0x1faf8018-0x1fffffff]
[ 0.213300] e820: reserve RAM buffer [mem 0x2c6c3000-0x2fffffff]
[ 0.213301] e820: reserve RAM buffer [mem 0x3a6ab000-0x3bffffff]
[ 0.213302] e820: reserve RAM buffer [mem 0x3dcf0000-0x3fffffff]
[ 0.213303] e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
[ 0.213304] e820: reserve RAM buffer [mem 0x2ae800000-0x2afffffff]
[ 0.215736] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.215738] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.215739] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.215748] vgaarb: loaded
[ 0.215793] clocksource: Switched to clocksource tsc-early
[ 0.215914] VFS: Disk quotas dquot_6.6.0
[ 0.215922] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.216033] AppArmor: AppArmor Filesystem Enabled
[ 0.216047] pnp: PnP ACPI init
[ 0.216226] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.216228] system 00:00: [io 0xffff] has been reserved
[ 0.216230] system 00:00: [io 0xffff] has been reserved
[ 0.216232] system 00:00: [io 0xffff] has been reserved
[ 0.216233] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.216235] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.216590] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.216592] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.216594] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.216596] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.216597] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.216599] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.216601] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.216602] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.216604] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.216606] system 00:04: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.216640] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.216643] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.216645] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.216647] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.216649] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.216651] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.216652] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.216876] system 00:06: [io 0xff00-0xfffe] has been reserved
[ 0.217689] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.217692] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.220954] pnp: PnP ACPI: found 8 devices
[ 0.226537] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.226586] NET: Registered PF_INET protocol family
[ 0.226664] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.238170] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.238186] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.238202] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.238339] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.238529] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.238578] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.238613] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.238630] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.238670] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.238677] NET: Registered PF_XDP protocol family
[ 0.238686] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 1000
[ 0.238694] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]: assigned
[ 0.238697] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.238701] pci 0000:00:1c.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.238707] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.238710] pci 0000:00:1c.2: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.238717] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.238723] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.238727] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.238729] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.238734] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.238745] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.238751] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.238752] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.238754] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.238755] pci_bus 0000:00: resource 7 [mem 0x4f800000-0xdfffffff window]
[ 0.238757] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.238758] pci_bus 0000:01: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.238760] pci_bus 0000:02: resource 1 [mem 0xdc100000-0xdc1fffff]
[ 0.238761] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.238762] pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
[ 0.238764] pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.238765] pci_bus 0000:6e: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 0.239593] PCI: CLS 0 bytes, default 64
[ 0.239638] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[ 0.239696] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.239932] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.0
[ 0.239935] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.1
[ 0.239943] DMAR: No ATSR found
[ 0.239944] DMAR: No SATC found
[ 0.239945] DMAR: IOMMU feature fl1gp_support inconsistent
[ 0.239946] DMAR: IOMMU feature pgsel_inv inconsistent
[ 0.239947] DMAR: IOMMU feature nwfs inconsistent
[ 0.239948] DMAR: IOMMU feature pasid inconsistent
[ 0.239949] DMAR: IOMMU feature eafs inconsistent
[ 0.239950] DMAR: IOMMU feature prs inconsistent
[ 0.239950] DMAR: IOMMU feature nest inconsistent
[ 0.239951] DMAR: IOMMU feature mts inconsistent
[ 0.239952] DMAR: IOMMU feature sc_support inconsistent
[ 0.239952] DMAR: IOMMU feature dev_iotlb_support inconsistent
[ 0.239954] DMAR: dmar0: Using Queued invalidation
[ 0.239957] DMAR: dmar1: Using Queued invalidation
[ 0.239992] Trying to unpack rootfs image as initramfs...
[ 0.240256] pci 0000:00:02.0: Adding to iommu group 0
[ 0.240286] pci 0000:00:00.0: Adding to iommu group 1
[ 0.240294] pci 0000:00:04.0: Adding to iommu group 2
[ 0.240307] pci 0000:00:14.0: Adding to iommu group 3
[ 0.240314] pci 0000:00:14.2: Adding to iommu group 3
[ 0.240327] pci 0000:00:15.0: Adding to iommu group 4
[ 0.240334] pci 0000:00:15.1: Adding to iommu group 4
[ 0.240347] pci 0000:00:16.0: Adding to iommu group 5
[ 0.240354] pci 0000:00:16.3: Adding to iommu group 5
[ 0.240363] pci 0000:00:1c.0: Adding to iommu group 6
[ 0.240372] pci 0000:00:1c.2: Adding to iommu group 7
[ 0.240383] pci 0000:00:1c.4: Adding to iommu group 8
[ 0.240399] pci 0000:00:1d.0: Adding to iommu group 9
[ 0.240417] pci 0000:00:1f.0: Adding to iommu group 10
[ 0.240426] pci 0000:00:1f.2: Adding to iommu group 10
[ 0.240434] pci 0000:00:1f.3: Adding to iommu group 10
[ 0.240442] pci 0000:00:1f.4: Adding to iommu group 10
[ 0.240451] pci 0000:01:00.0: Adding to iommu group 11
[ 0.240459] pci 0000:02:00.0: Adding to iommu group 12
[ 0.240477] pci 0000:6e:00.0: Adding to iommu group 13
[ 0.241331] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.241334] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.241335] software IO TLB: mapped [mem 0x00000000366ab000-0x000000003a6ab000] (64MB)
[ 0.241399] sgx: EPC section 0x40200000-0x45f7ffff
[ 0.241835] sgx: SGX disabled: SGX launch control CPU feature is not available, /dev/sgx_enclave disabled.
[ 0.242190] Initialise system trusted keyrings
[ 0.242197] Key type blacklist registered
[ 0.242235] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.242244] zbud: loaded
[ 0.242303] fuse: init (API version 7.41)
[ 0.242409] integrity: Platform Keyring initialized
[ 0.242411] integrity: Machine keyring initialized
[ 0.257137] Key type asymmetric registered
[ 0.257141] Asymmetric key parser 'x509' registered
[ 0.332236] Freeing initrd memory: 51864K
[ 0.336561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.336589] io scheduler mq-deadline registered
[ 0.337761] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.338491] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.341180] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.341182] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.341329] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.341797] serial 0000:00:16.3: enabling device (0000 -> 0003)
[ 0.342316] 0000:00:16.3: ttyS0 at I/O 0xf060 (irq = 19, base_baud = 115200) is a 16550A
[ 0.342471] hpet_acpi_add: no address or irqs in _CRS
[ 0.342496] Linux agpgart interface v0.103
[ 0.369595] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[ 0.433924] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.434692] i8042: Warning: Keylock active
[ 0.436177] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.436181] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.436306] mousedev: PS/2 mouse device common for all mice
[ 0.436323] rtc_cmos 00:01: RTC can wake from S4
[ 0.437010] rtc_cmos 00:01: registered as rtc0
[ 0.437172] rtc_cmos 00:01: setting system clock to 2025-08-13T07:19:52 UTC (1755069592)
[ 0.437194] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.437473] intel_pstate: Intel P-state driver initializing
[ 0.437738] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.437813] intel_pstate: HWP enabled
[ 0.438068] efifb: probing for efifb
[ 0.438078] efifb: framebuffer at 0x50000000, using 32400k, total 32400k
[ 0.438080] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[ 0.438082] efifb: scrolling: redraw
[ 0.438082] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.438181] Console: switching to colour frame buffer device 240x67
[ 0.442802] fb0: EFI VGA frame buffer device
[ 0.442923] NET: Registered PF_INET6 protocol family
[ 0.447040] Segment Routing with IPv6
[ 0.447050] In-situ OAM (IOAM) with IPv6
[ 0.447069] mip6: Mobile IPv6
[ 0.447073] NET: Registered PF_PACKET protocol family
[ 0.447167] mpls_gso: MPLS GSO support
[ 0.448831] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.450159] microcode: Current revision: 0x000000f6
[ 0.450161] microcode: Updated early from: 0x000000f0
[ 0.450283] IPI shorthand broadcast: enabled
[ 0.451761] sched_clock: Marking stable (444423390, 5845658)->(484644177, -34375129)
[ 0.451992] registered taskstats version 1
[ 0.452109] Loading compiled-in X.509 certificates
[ 0.465897] Loaded X.509 cert 'Build time autogenerated kernel key: ba77a71e64c453bc15410391734927a088a45279'
[ 0.468404] Demotion targets for Node 0: null
[ 0.468521] Key type .fscrypt registered
[ 0.468523] Key type fscrypt-provisioning registered
[ 0.485016] Key type encrypted registered
[ 0.485021] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.486256] integrity: Loading X.509 certificate: UEFI:db
[ 0.486290] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 0.486292] integrity: Loading X.509 certificate: UEFI:db
[ 0.486317] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.486318] integrity: Loading X.509 certificate: UEFI:db
[ 0.486332] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.488089] ima: Allocated hash algorithm: sha256
[ 0.607429] ima: No architecture policies found
[ 0.607492] evm: Initialising EVM extended attributes:
[ 0.607495] evm: security.selinux
[ 0.607498] evm: security.SMACK64 (disabled)
[ 0.607501] evm: security.SMACK64EXEC (disabled)
[ 0.607504] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.607506] evm: security.SMACK64MMAP (disabled)
[ 0.607509] evm: security.apparmor
[ 0.607511] evm: security.ima
[ 0.607513] evm: security.capability
[ 0.607516] evm: HMAC attrs: 0x1
[ 0.610290] RAS: Correctable Errors collector initialized.
[ 0.624948] clk: Disabling unused clocks
[ 0.624959] PM: genpd: Disabling unused power domains
[ 0.628220] Freeing unused decrypted memory: 2028K
[ 0.629574] Freeing unused kernel image (initmem) memory: 4148K
[ 0.629784] Write protecting the kernel read-only data: 28672k
[ 0.630779] Freeing unused kernel image (rodata/data gap) memory: 500K
[ 0.687017] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.687019] x86/mm: Checking user space page tables
[ 0.728310] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.728314] Run /init as init process
[ 0.728315] with arguments:
[ 0.728317] /init
[ 0.728318] with environment:
[ 0.728319] HOME=/
[ 0.728319] TERM=linux
[ 0.728320] BOOT_IMAGE=/vmlinuz-6.12.38+deb13-amd64
[ 1.005419] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1.005459] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.006821] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 1.007966] platform idma64.0: Adding to iommu group 14
[ 1.008132] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 1.008628] platform i2c_designware.0: Adding to iommu group 15
[ 1.012232] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found
[ 1.022877] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 1.043973] ACPI: bus type USB registered
[ 1.044105] usbcore: registered new interface driver usbfs
[ 1.044118] usbcore: registered new interface driver hub
[ 1.044136] usbcore: registered new device driver usb
[ 1.045344] cryptd: max_cpu_qlen set to 1000
[ 1.056770] ACPI: battery: Slot [BAT0] (battery present)
[ 1.071770] iTCO_vendor_support: vendor-support=0
[ 1.076884] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 1.077021] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.077533] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 1.078107] platform idma64.1: Adding to iommu group 16
[ 1.078259] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 1.078295] platform i2c_designware.1: Adding to iommu group 17
[ 1.080004] AES CTR mode by8 optimization enabled
[ 1.120956] nvme nvme0: pci function 0000:6e:00.0
[ 1.121159] ACPI: bus type drm_connector registered
[ 1.128408] nvme nvme0: D3 entry latency set to 8 seconds
[ 1.136863] nvme nvme0: 8/0/0 default/read/poll queues
[ 1.140124] nvme0n1: p1 p2 p3 p4
[ 1.143856] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.143869] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.145007] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 1.148583] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.148592] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.148598] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.148647] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.148652] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.148654] usb usb1: Product: xHCI Host Controller
[ 1.148657] usb usb1: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd
[ 1.148659] usb usb1: SerialNumber: 0000:00:14.0
[ 1.148867] hub 1-0:1.0: USB hub found
[ 1.148888] hub 1-0:1.0: 12 ports detected
[ 1.150721] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 1.150727] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.150730] usb usb2: Product: xHCI Host Controller
[ 1.150732] usb usb2: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd
[ 1.150735] usb usb2: SerialNumber: 0000:00:14.0
[ 1.150889] hub 2-0:1.0: USB hub found
[ 1.150902] hub 2-0:1.0: 6 ports detected
[ 1.158729] hid: raw HID events driver (C) Jiri Kosina
[ 1.241888] tsc: Refined TSC clocksource calibration: 1896.002 MHz
[ 1.241902] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a8d617cd5, max_idle_ns: 881590553509 ns
[ 1.241984] clocksource: Switched to clocksource tsc
[ 1.256927] i2c_hid_acpi i2c-ELAN24EE:00: i2c_hid_get_input: IRQ triggered but there's no data
[ 1.328336] input: ELAN24EE:00 04F3:24EE Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input4
[ 1.328396] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input5
[ 1.328433] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input6
[ 1.328489] hid-generic 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 1.328896] input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input8
[ 1.328964] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input9
[ 1.329068] hid-generic 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 1.368666] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input11
[ 1.368856] input: ELAN24EE:00 04F3:24EE UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input12
[ 1.368893] input: ELAN24EE:00 04F3:24EE UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input13
[ 1.369042] hid-multitouch 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 1.405943] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.589044] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
[ 1.589050] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.589052] usb 1-5: Product: Integrated_Webcam_HD
[ 1.589054] usb 1-5: Manufacturer: CN0FFMHCLOG0087LB412A01
[ 1.589056] usb 1-5: SerialNumber: 200901010001
[ 1.610105] input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input15
[ 1.610227] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input16
[ 1.610381] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 1.693747] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.693790] device-mapper: uevent: version 1.0.3
[ 1.693925] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 1.713919] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.851013] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[ 1.851017] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.969875] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[ 2.107575] usb 1-10: New USB device found, idVendor=27c6, idProduct=5385, bcdDevice= 1.00
[ 2.107586] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.107591] usb 1-10: Product: Goodix Fingerprint Device
[ 2.107596] usb 1-10: Manufacturer: HTMicroelectronics
[ 2.107600] usb 1-10: SerialNumber: HTK32
[ 13.269889] psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5
[ 13.757861] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 15.033080] PM: Image not found (code -22)
[ 15.171985] EXT4-fs (dm-0): orphan cleanup on readonly fs
[ 15.172348] EXT4-fs (dm-0): mounted filesystem 118784b1-3045-408c-a9be-2a72336ae938 ro with ordered data mode. Quota mode: none.
[ 15.222371] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 15.276867] systemd[1]: Inserted module 'autofs4'
[ 15.467377] systemd[1]: systemd 258~rc2-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 15.467403] systemd[1]: Detected architecture x86-64.
[ 15.470967] systemd[1]: Hostname set to <glinka>.
[ 15.642477] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 15.683367] systemd-sysv-generator[842]: SysV service '/etc/init.d/isc-dhcp-server' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 15.683373] systemd-sysv-generator[842]: Please update package to include a native systemd unit file.
[ 15.683377] systemd-sysv-generator[842]: ! This compatibility logic is deprecated, expect removal soon. !
[ 15.807178] systemd[1]: Queued start job for default target graphical.target.
[ 15.839151] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 15.839590] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 15.839945] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 15.840196] systemd[1]: Created slice user.slice - User and Session Slice.
[ 15.840279] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 15.840334] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 15.840561] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 15.840589] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 15.840596] systemd[1]: Expecting device dev-disk-by\x2duuid-22D6\x2d7D2A.device - /dev/disk/by-uuid/22D6-7D2A...
[ 15.840604] systemd[1]: Expecting device dev-nvme0n1p2.device - /dev/nvme0n1p2...
[ 15.840624] systemd[1]: Reached target imports.target - Image Downloads.
[ 15.840656] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 15.840667] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 15.840680] systemd[1]: Reached target slices.target - Slice Units.
[ 15.841777] systemd[1]: Listening on systemd-ask-password.socket - Query the User Interactively for a Password.
[ 15.843026] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 15.843788] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 15.844809] systemd[1]: Listening on systemd-factory-reset.socket - Factory Reset Management.
[ 15.844926] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 15.845033] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 15.845082] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 15.845099] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 15.845181] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 15.845237] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 15.845312] systemd[1]: Listening on systemd-udevd-varlink.socket - udev Varlink Socket.
[ 15.846390] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 15.847191] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 15.847996] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 15.848824] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 15.850630] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 15.852117] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 15.853734] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 15.853796] systemd[1]: modprobe@drm.service - Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm).
[ 15.855538] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 15.855597] systemd[1]: modprobe@fuse.service - Load Kernel Module fuse was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!fuse).
[ 15.856985] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 15.857121] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 15.857190] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 15.859955] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 15.863622] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 15.863667] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 15.865116] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 15.865212] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 15.866671] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 15.868757] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 15.870651] pstore: Using crash dump compression: deflate
[ 15.890598] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 15.892377] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 15.899362] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 15.900792] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 15.903690] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 15.906289] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 15.908794] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 15.910653] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 15.912837] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 15.922688] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 15.926645] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 15.934418] pstore: Registered efi_pstore as persistent store backend
[ 15.935400] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 15.935701] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 15.940090] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 15.942769] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 15.946507] systemd-journald[855]: Collecting audit messages is disabled.
[ 15.948600] lp: driver loaded but no devices found
[ 15.953990] ppdev: user-space parallel port driver
[ 15.961626] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 15.962910] i2c_dev: i2c /dev entries driver
[ 15.964788] EXT4-fs (dm-0): re-mounted 118784b1-3045-408c-a9be-2a72336ae938 r/w.
[ 15.965941] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 15.966407] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 15.966474] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 15.967600] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 15.967648] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 15.969485] systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization...
[ 15.970982] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 15.971017] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 15.987825] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 15.990962] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 15.991440] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 15.991546] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 15.992879] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 15.994465] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 16.009104] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 16.030786] systemd[1]: Started systemd-timesyncd.service - Network Time Synchronization.
[ 16.030949] systemd[1]: Reached target time-set.target - System Time Set.
[ 16.031385] systemd[1]: Started systemd-journald.service - Journal Service.
[ 16.046335] systemd-journald[855]: Received client request to flush runtime journal.
[ 16.331686] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input18
[ 16.348399] Consider using thermal netlink events interface
[ 16.350866] ACPI: AC: AC Adapter [AC] (off-line)
[ 16.351215] ACPI: button: Lid Switch [LID0]
[ 16.354952] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input19
[ 16.355836] intel_pmc_core INT33A1:00: initialized
[ 16.356729] input: Intel HID events as /devices/platform/INT33D5:00/input/input20
[ 16.360593] intel-hid INT33D5:00: platform supports 5 button array
[ 16.360658] ACPI: button: Power Button [PBTN]
[ 16.362621] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input22
[ 16.362631] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input21
[ 16.362788] ACPI: button: Sleep Button [SBTN]
[ 16.362881] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input23
[ 16.363000] ACPI: button: Power Button [PWRF]
[ 16.471753] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 16.500380] input: PC Speaker as /devices/platform/pcspkr/input/input24
[ 16.518052] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 16.541781] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input25
[ 16.545745] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 16.554825] intel_rapl_common: Found RAPL domain package
[ 16.554829] intel_rapl_common: Found RAPL domain dram
[ 16.565959] mc: Linux media interface: v0.10
[ 16.575866] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 16.667269] Bluetooth: Core ver 2.22
[ 16.667288] NET: Registered PF_BLUETOOTH protocol family
[ 16.667290] Bluetooth: HCI device and connection manager initialized
[ 16.667293] Bluetooth: HCI socket layer initialized
[ 16.667296] Bluetooth: L2CAP socket layer initialized
[ 16.667299] Bluetooth: SCO socket layer initialized
[ 16.670535] cdc_acm 1-10:1.0: ttyACM0: USB ACM device
[ 16.670578] usbcore: registered new interface driver cdc_acm
[ 16.670581] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 16.702602] intel_rapl_common: Found RAPL domain package
[ 16.702608] intel_rapl_common: Found RAPL domain core
[ 16.702610] intel_rapl_common: Found RAPL domain uncore
[ 16.702611] intel_rapl_common: Found RAPL domain dram
[ 16.702613] intel_rapl_common: Found RAPL domain psys
[ 16.735383] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.735890] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 16.736142] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 16.736390] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 16.736639] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 16.784154] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 16.784159] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 16.784161] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 16.784163] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 16.784164] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 16.784165] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 16.796223] videodev: Linux video capture interface: v2.00
[ 16.810342] ACPI: battery: new extension: Dell Primary Battery Extension
[ 16.835039] Intel(R) Wireless WiFi driver for Linux
[ 16.835360] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 16.835692] usbcore: registered new interface driver btusb
[ 16.836525] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 16.837588] Bluetooth: hci0: Device revision is 16
[ 16.837592] Bluetooth: hci0: Secure boot is enabled
[ 16.837594] Bluetooth: hci0: OTP lock is enabled
[ 16.837595] Bluetooth: hci0: API lock is enabled
[ 16.837597] Bluetooth: hci0: Debug lock is disabled
[ 16.837598] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 16.838825] iwlwifi 0000:02:00.0: Detected crf-id 0xbadcafe, cnv-id 0x10 wfpm id 0x80000000
[ 16.838933] iwlwifi 0000:02:00.0: PCI dev 24fd/8050, rev=0x230, rfid=0xd55555d5
[ 16.838938] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265
[ 16.842461] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 16.858608] iwlwifi 0000:02:00.0: loaded firmware version 36.ca7b901d.0 8265-36.ucode op_mode iwlmvm
[ 16.871378] usb 1-5: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
[ 16.893569] usb 1-5: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
[ 16.895661] usbcore: registered new interface driver uvcvideo
[ 16.895685] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 16.918908] EXT4-fs (nvme0n1p2): mounted filesystem ce715364-82d6-4b2d-8883-63f17a6b61e8 r/w with ordered data mode. Quota mode: none.
[ 17.039228] audit: type=1400 audit(1755069609.096:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=1042 comm="apparmor_parser"
[ 17.039234] audit: type=1400 audit(1755069609.096:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=1045 comm="apparmor_parser"
[ 17.039237] audit: type=1400 audit(1755069609.096:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=1043 comm="apparmor_parser"
[ 17.039239] audit: type=1400 audit(1755069609.096:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=1044 comm="apparmor_parser"
[ 17.039530] audit: type=1400 audit(1755069609.096:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=1049 comm="apparmor_parser"
[ 17.039535] audit: type=1400 audit(1755069609.096:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=1048 comm="apparmor_parser"
[ 17.039537] audit: type=1400 audit(1755069609.096:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=1047 comm="apparmor_parser"
[ 17.040455] audit: type=1400 audit(1755069609.096:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=1050 comm="apparmor_parser"
[ 17.041017] audit: type=1400 audit(1755069609.096:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=1051 comm="apparmor_parser"
[ 17.041449] audit: type=1400 audit(1755069609.096:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=1053 comm="apparmor_parser"
[ 17.527204] i915 0000:00:02.0: [drm] Found KABYLAKE (device ID 5917) display version 9.00 stepping C0
[ 17.527903] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 17.528121] Console: switching to colour dummy device 80x25
[ 17.528199] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 17.528258] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 17.530295] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.531695] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 17.588687] iwlwifi 0000:02:00.0: base HW address: 38:ba:f8:94:0a:e8, OTP minor version: 0x0
[ 17.596051] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 17.619062] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 17.622814] Process accounting resumed
[ 17.626580] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.627755] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input26
[ 17.629117] nvme nvme0: using unchecked data buffer
[ 17.636338] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.636343] Bluetooth: BNEP filters: protocol multicast
[ 17.636348] Bluetooth: BNEP socket layer initialized
[ 17.645912] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 17.668190] fbcon: i915drmfb (fb0) is primary device
[ 17.673704] Console: switching to colour frame buffer device 240x67
[ 17.683266] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 17.705127] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 17.716941] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 17.741753] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 17.741761] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.741765] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 17.741768] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 17.741770] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 17.741772] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 17.741775] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 17.741777] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
[ 17.821498] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 17.925116] block nvme0n1: No UUID available providing old NGUID
[ 18.007706] NET: Registered PF_QIPCRTR protocol family
[ 18.045963] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3
[ 18.156583] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[ 18.253885] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 18.451912] Bluetooth: hci0: Waiting for firmware download to complete
[ 18.452501] Bluetooth: hci0: Firmware loaded in 1572298 usecs
[ 18.452640] Bluetooth: hci0: Waiting for device to boot
[ 18.465519] Bluetooth: hci0: Device booted in 12632 usecs
[ 18.466106] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 18.472538] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 18.473530] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021
[ 18.479509] Bluetooth: hci0: Reading supported features failed (-16)
[ 18.479558] Bluetooth: hci0: Error reading debug features
[ 18.479568] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 18.532691] Bluetooth: MGMT ver 1.23
[ 18.540713] NET: Registered PF_ALG protocol family
[ 18.582424] Initializing XFRM netlink socket
[ 18.583602] Bluetooth: RFCOMM TTY layer initialized
[ 18.583611] Bluetooth: RFCOMM socket layer initialized
[ 18.583617] Bluetooth: RFCOMM ver 1.11
[ 18.587438] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 18.587534] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 18.587621] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 18.587700] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 18.609641] IPsec XFRM device driver
[ 20.941940] rfkill: input handler disabled
[ 31.924335] rfkill: input handler enabled
[ 35.358365] rfkill: input handler disabled
[ 36.275267] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Upstream Port
[ 36.275338] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 36.275361] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 36.275389] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 36.275408] pci 0000:03:00.0: enabling Extended Tags
[ 36.276022] pci 0000:03:00.0: supports D1 D2
[ 36.276026] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 36.276690] pci 0000:03:00.0: Adding to iommu group 18
[ 36.277552] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 36.277633] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 36.277647] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 36.277686] pci 0000:04:00.0: enabling Extended Tags
[ 36.277923] pci 0000:04:00.0: supports D1 D2
[ 36.277927] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 36.279577] pci 0000:04:00.0: Adding to iommu group 19
[ 36.279781] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 36.279840] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 36.279856] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 36.279874] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 36.279907] pci 0000:04:01.0: enabling Extended Tags
[ 36.280137] pci 0000:04:01.0: supports D1 D2
[ 36.280141] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 36.281265] pci 0000:04:01.0: Adding to iommu group 20
[ 36.281473] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 36.281525] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 36.281546] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 36.281608] pci 0000:04:02.0: enabling Extended Tags
[ 36.283266] pci 0000:04:02.0: supports D1 D2
[ 36.283271] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 36.284463] pci 0000:04:02.0: Adding to iommu group 21
[ 36.284645] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 36.284691] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 36.284706] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 36.284723] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 36.284744] pci 0000:04:04.0: enabling Extended Tags
[ 36.285888] pci 0000:04:04.0: supports D1 D2
[ 36.285895] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 36.286235] pci 0000:04:04.0: Adding to iommu group 22
[ 36.286409] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 36.289617] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 36.289943] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 36.293884] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint
[ 36.293930] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff]
[ 36.294060] pci 0000:39:00.0: enabling Extended Tags
[ 36.294313] pci 0000:39:00.0: supports D1 D2
[ 36.294317] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 36.294518] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:04:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 36.295245] pci 0000:39:00.0: Adding to iommu group 21
[ 36.295381] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 36.295496] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 36.295575] pci_bus 0000:04: Allocating resources
[ 36.295598] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 36.295604] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 36.295609] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 36.295615] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 36.295619] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 36.295625] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 36.295628] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 36.295632] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 36.295635] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 36.295642] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 36.295645] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 36.295649] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.295652] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 36.295655] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.295658] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 36.295660] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.295663] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 36.295667] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.295670] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 36.295674] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 36.295677] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 36.295680] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.295682] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 36.295685] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.295688] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 36.295691] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 36.295703] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 36.295718] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 36.295726] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 36.295732] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 36.295742] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 36.295750] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 36.295763] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 36.295775] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 36.295780] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 36.295788] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 36.295797] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 36.295804] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 36.425694] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 36.425707] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 36.426935] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 36.427685] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 36.427694] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 36.427701] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 36.427760] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 36.427766] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 36.427769] usb usb3: Product: xHCI Host Controller
[ 36.427772] usb usb3: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd
[ 36.427775] usb usb3: SerialNumber: 0000:39:00.0
[ 36.428286] hub 3-0:1.0: USB hub found
[ 36.428303] hub 3-0:1.0: 2 ports detected
[ 36.429034] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 36.429040] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 36.429044] usb usb4: Product: xHCI Host Controller
[ 36.429047] usb usb4: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd
[ 36.429050] usb usb4: SerialNumber: 0000:39:00.0
[ 36.429299] hub 4-0:1.0: USB hub found
[ 36.429311] hub 4-0:1.0: 2 ports detected
[ 36.456696] pci_bus 0000:04: Allocating resources
[ 36.456717] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 36.456723] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 36.456726] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 36.456730] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 36.456733] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 36.456737] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 36.456740] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 36.456742] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 36.456744] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 36.456749] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 36.456752] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 36.456754] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.456756] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 36.456758] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.456759] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 36.456761] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.456763] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 36.456766] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.456768] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 36.456770] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 36.456772] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 36.456774] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.456776] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 36.456778] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 36.456780] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 36.674104] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 36.816303] usb 3-2: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 36.816320] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 36.816324] usb 3-2: Product: USB2.0 Hub
[ 36.816327] usb 3-2: Manufacturer: VIA Labs, Inc.
[ 36.816330] usb 3-2: SerialNumber: 000000000
[ 36.825117] hub 3-2:1.0: USB hub found
[ 36.825256] hub 3-2:1.0: 5 ports detected
[ 37.541883] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
[ 37.684080] usb 3-2.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 37.684092] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 37.684095] usb 3-2.1: Product: USB2.0 Hub
[ 37.684097] usb 3-2.1: Manufacturer: VIA Labs, Inc.
[ 37.684099] usb 3-2.1: SerialNumber: 000000000
[ 37.685380] hub 3-2.1:1.0: USB hub found
[ 37.685607] hub 3-2.1:1.0: 4 ports detected
[ 38.065898] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[ 38.138635] SCSI subsystem initialized
[ 38.208874] usb 3-2.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 38.208881] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 38.208883] usb 3-2.4: Product: Mass Storage Device
[ 38.208885] usb 3-2.4: Manufacturer: Generic
[ 38.208887] usb 3-2.4: SerialNumber: 158F84688461
[ 38.247547] usb-storage 3-2.4:1.0: USB Mass Storage device detected
[ 38.247744] scsi host0: usb-storage 3-2.4:1.0
[ 38.247888] usbcore: registered new interface driver usb-storage
[ 38.254479] usbcore: registered new interface driver uas
[ 38.345904] usb 3-2.1.3: new high-speed USB device number 5 using xhci_hcd
[ 38.438758] usb 3-2.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 38.438767] usb 3-2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 38.438770] usb 3-2.1.3: Product: USB 10/100/1000 LAN
[ 38.438772] usb 3-2.1.3: Manufacturer: Realtek
[ 38.438774] usb 3-2.1.3: SerialNumber: 000001
[ 38.529532] usbcore: registered new device driver r8152-cfgselector
[ 38.602161] r8152-cfgselector 3-2.1.3: reset high-speed USB device number 5 using xhci_hcd
[ 38.750630] r8152 3-2.1.3:1.0 eth0: v1.12.13
[ 38.750685] usbcore: registered new interface driver r8152
[ 38.768043] usbcore: registered new interface driver cdc_ether
[ 38.771236] usbcore: registered new interface driver r8153_ecm
[ 38.894142] r8152 3-2.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 39.263367] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 39.264743] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 39.265755] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 39.266114] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 39.266514] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 39.266844] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 39.289433] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 39.289517] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 41.493864] usb 3-2.5: new high-speed USB device number 6 using xhci_hcd
[ 41.586923] usb 3-2.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 41.586931] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 41.586934] usb 3-2.5: Product: USB Billboard Device
[ 41.586936] usb 3-2.5: Manufacturer: VIA Labs, Inc.
[ 41.586938] usb 3-2.5: SerialNumber: 0000000000000001
[ 42.173273] r8152 3-2.1.3:1.0 enx00e04ceb9e75: carrier on
[ 48.633641] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 48.677840] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 48.677848] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 48.677851] usb 4-2: Product: USB3.0 Hub
[ 48.677853] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 48.677855] usb 4-2: SerialNumber: 000000000
[ 48.679743] hub 4-2:1.0: USB hub found
[ 48.679950] hub 4-2:1.0: 4 ports detected
[ 48.970328] r8152 3-2.1.3:1.0 enx00e04ceb9e75: entered promiscuous mode
[ 48.970740] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 49.305984] usb 4-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 49.350643] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 49.350651] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 49.350655] usb 4-2.1: Product: USB3.0 Hub
[ 49.350658] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 49.350661] usb 4-2.1: SerialNumber: 000000000
[ 49.359373] usb 4-2.1: Enable of device-initiated U1 failed.
[ 49.359382] usb 4-2.1: Failed to set U1 timeout to 0x0,error code -19
[ 49.359492] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -19
[ 49.359597] hub 4-2.1:1.0: USB hub found
[ 49.380365] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 49.387365] usb 4-2.1: Failed to suspend device, error -19
[ 51.469303] usb 4-2: USB disconnect, device number 2
[ 51.469312] usb 4-2.1: USB disconnect, device number 3
[ 51.663116] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 51.668068] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 51.723439] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd
[ 51.767691] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 51.767702] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 51.767707] usb 4-2: Product: USB3.0 Hub
[ 51.767710] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 51.767713] usb 4-2: SerialNumber: 000000000
[ 51.769720] hub 4-2:1.0: USB hub found
[ 51.769837] hub 4-2:1.0: 4 ports detected
[ 52.029292] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 52.033707] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 52.414231] usb 4-2.1: new SuperSpeed USB device number 5 using xhci_hcd
[ 52.458875] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 52.458885] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 52.458891] usb 4-2.1: Product: USB3.0 Hub
[ 52.458895] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 52.458898] usb 4-2.1: SerialNumber: 000000000
[ 52.467312] usb 4-2.1: Enable of device-initiated U1 failed.
[ 52.467321] usb 4-2.1: Failed to set U1 timeout to 0x0,error code -19
[ 52.467388] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -19
[ 52.467500] hub 4-2.1:1.0: USB hub found
[ 52.488314] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 52.495313] usb 4-2.1: Failed to suspend device, error -19
[ 54.369812] usb 4-2: USB disconnect, device number 4
[ 54.369823] usb 4-2.1: USB disconnect, device number 5
[ 54.579609] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 54.582660] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 54.624600] usb 4-2: new SuperSpeed USB device number 6 using xhci_hcd
[ 54.672854] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 54.672866] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 54.672872] usb 4-2: Product: USB3.0 Hub
[ 54.672877] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 54.672881] usb 4-2: SerialNumber: 000000000
[ 54.675031] hub 4-2:1.0: USB hub found
[ 54.675111] hub 4-2:1.0: 4 ports detected
[ 54.994977] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 54.997742] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 54.998093] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 55.309151] usb 4-2.1: new SuperSpeed USB device number 7 using xhci_hcd
[ 55.357795] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 55.357810] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 55.357817] usb 4-2.1: Product: USB3.0 Hub
[ 55.357822] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 55.357828] usb 4-2.1: SerialNumber: 000000000
[ 55.366907] usb 4-2.1: Enable of device-initiated U1 failed.
[ 55.366924] usb 4-2.1: Failed to set U1 timeout to 0x0,error code -19
[ 55.367201] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -19
[ 55.367483] hub 4-2.1:1.0: USB hub found
[ 55.388385] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 55.395900] usb 4-2.1: Failed to suspend device, error -19
[ 56.463902] usb 4-2: USB disconnect, device number 6
[ 56.463917] usb 4-2.1: USB disconnect, device number 7
[ 56.691963] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 56.692136] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 56.696276] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 56.710734] usb 4-2: new SuperSpeed USB device number 8 using xhci_hcd
[ 56.755134] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 56.755145] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 56.755151] usb 4-2: Product: USB3.0 Hub
[ 56.755156] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 56.755160] usb 4-2: SerialNumber: 000000000
[ 56.757589] hub 4-2:1.0: USB hub found
[ 56.757780] hub 4-2:1.0: 4 ports detected
[ 57.146572] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 57.149508] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 57.149743] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 57.412495] usb 4-2.1: new SuperSpeed USB device number 9 using xhci_hcd
[ 57.457431] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 57.457447] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 57.457455] usb 4-2.1: Product: USB3.0 Hub
[ 57.457460] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 57.457465] usb 4-2.1: SerialNumber: 000000000
[ 57.466301] usb 4-2.1: Enable of device-initiated U1 failed.
[ 57.466316] usb 4-2.1: Failed to set U1 timeout to 0x0,error code -19
[ 57.466396] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -19
[ 57.466564] hub 4-2.1:1.0: USB hub found
[ 57.487531] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 57.494848] usb 4-2.1: Failed to suspend device, error -19
[ 58.564067] usb 4-2: USB disconnect, device number 8
[ 58.564081] usb 4-2.1: USB disconnect, device number 9
[ 58.790859] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 58.791048] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 58.794725] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 58.794930] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 58.811357] usb 4-2: new SuperSpeed USB device number 10 using xhci_hcd
[ 58.856673] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 58.856684] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 58.856689] usb 4-2: Product: USB3.0 Hub
[ 58.856692] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 58.856696] usb 4-2: SerialNumber: 000000000
[ 58.859268] hub 4-2:1.0: USB hub found
[ 58.859412] hub 4-2:1.0: 4 ports detected
[ 59.191821] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 59.195016] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 59.517436] usb 4-2.1: new SuperSpeed USB device number 11 using xhci_hcd
[ 59.562218] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 59.562233] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 59.562241] usb 4-2.1: Product: USB3.0 Hub
[ 59.562246] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 59.562251] usb 4-2.1: SerialNumber: 000000000
[ 59.574746] hub 4-2.1:1.0: USB hub found
[ 59.575366] hub 4-2.1:1.0: 4 ports detected
[ 59.704712] usb 3-2: USB disconnect, device number 2
[ 59.704730] usb 3-2.1: USB disconnect, device number 3
[ 59.704741] r8152-cfgselector 3-2.1.3: USB disconnect, device number 5
[ 59.705099] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Stop submitting intr, status -108
[ 59.707505] r8152 3-2.1.3:1.0 enx00e04ceb9e75 (unregistering): left promiscuous mode
[ 59.772981] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[ 59.773035] xhci_hcd 0000:39:00.0: HC died; cleaning up
[ 59.801244] xhci_hcd 0000:39:00.0: remove, state 1
[ 59.801268] usb usb4: USB disconnect, device number 1
[ 59.802577] usb 3-2.4: USB disconnect, device number 4
[ 59.876445] usb 4-2: USB disconnect, device number 10
[ 59.876464] usb 4-2.1: USB disconnect, device number 11
[ 59.881182] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[ 59.881207] xhci_hcd 0000:39:00.0: remove, state 1
[ 59.881217] usb usb3: USB disconnect, device number 1
[ 59.992848] usb 3-2.5: USB disconnect, device number 6
[ 59.995140] xhci_hcd 0000:39:00.0: Host halt failed, -19
[ 59.995158] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[ 59.995806] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[ 59.998099] pcieport 0000:04:00.0: Unable to change power state from D3hot to D0, device inaccessible
[ 60.005660] pci_bus 0000:05: busn_res: [bus 05] is released
[ 60.006577] pci_bus 0000:06: busn_res: [bus 06-38] is released
[ 60.009361] pci_bus 0000:39: busn_res: [bus 39] is released
[ 60.011985] pci_bus 0000:3a: busn_res: [bus 3a-6d] is released
[ 60.013231] pci_bus 0000:04: busn_res: [bus 04-6d] is released
[ 65.123901] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Upstream Port
[ 65.123962] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 65.123982] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 65.124004] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 65.124028] pci 0000:03:00.0: enabling Extended Tags
[ 65.124172] pci 0000:03:00.0: supports D1 D2
[ 65.124177] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 65.124654] pci 0000:03:00.0: Adding to iommu group 18
[ 65.125058] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 65.125115] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 65.125133] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 65.125174] pci 0000:04:00.0: enabling Extended Tags
[ 65.125319] pci 0000:04:00.0: supports D1 D2
[ 65.125324] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 65.125658] pci 0000:04:00.0: Adding to iommu group 19
[ 65.125857] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 65.125912] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 65.125929] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 65.125950] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 65.125975] pci 0000:04:01.0: enabling Extended Tags
[ 65.126124] pci 0000:04:01.0: supports D1 D2
[ 65.126128] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 65.126480] pci 0000:04:01.0: Adding to iommu group 20
[ 65.126693] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 65.126748] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 65.126766] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 65.126806] pci 0000:04:02.0: enabling Extended Tags
[ 65.126950] pci 0000:04:02.0: supports D1 D2
[ 65.126955] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 65.127320] pci 0000:04:02.0: Adding to iommu group 21
[ 65.127537] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 65.127592] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 65.127610] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 65.127630] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 65.127656] pci 0000:04:04.0: enabling Extended Tags
[ 65.127804] pci 0000:04:04.0: supports D1 D2
[ 65.127808] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 65.128068] pci 0000:04:04.0: Adding to iommu group 22
[ 65.128349] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 65.128625] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 65.128779] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 65.129026] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint
[ 65.129076] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff]
[ 65.129210] pci 0000:39:00.0: enabling Extended Tags
[ 65.129427] pci 0000:39:00.0: supports D1 D2
[ 65.129434] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 65.129601] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:04:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 65.129969] pci 0000:39:00.0: Adding to iommu group 21
[ 65.130103] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 65.130272] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 65.130390] pci_bus 0000:04: Allocating resources
[ 65.130432] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 65.130445] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 65.130456] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 65.130468] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 65.130480] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 65.130493] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 65.130501] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 65.130509] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 65.130516] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 65.130533] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 65.130541] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 65.130549] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 65.130556] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 65.130563] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 65.130570] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 65.130577] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 65.130584] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 65.130593] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 65.130600] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 65.130609] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 65.130617] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 65.130624] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 65.130631] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 65.130639] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 65.130645] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 65.130654] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 65.130667] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 65.130687] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 65.130700] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 65.130710] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 65.130727] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 65.130739] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 65.130757] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 65.130769] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 65.130780] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 65.130794] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 65.130807] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 65.130818] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 65.140281] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 65.140365] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 65.141871] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 65.142858] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 65.142879] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 65.142895] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 65.143080] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 65.143097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 65.143107] usb usb3: Product: xHCI Host Controller
[ 65.143114] usb usb3: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd
[ 65.143121] usb usb3: SerialNumber: 0000:39:00.0
[ 65.143832] hub 3-0:1.0: USB hub found
[ 65.143863] hub 3-0:1.0: 2 ports detected
[ 65.145553] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 65.145565] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 65.145572] usb usb4: Product: xHCI Host Controller
[ 65.145577] usb usb4: Manufacturer: Linux 6.12.38+deb13-amd64 xhci-hcd
[ 65.145581] usb usb4: SerialNumber: 0000:39:00.0
[ 65.146718] hub 4-0:1.0: USB hub found
[ 65.146747] hub 4-0:1.0: 2 ports detected
[ 65.393942] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 65.535592] usb 3-2: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 65.535621] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 65.535628] usb 3-2: Product: USB2.0 Hub
[ 65.535634] usb 3-2: Manufacturer: VIA Labs, Inc.
[ 65.535639] usb 3-2: SerialNumber: 000000000
[ 65.537793] hub 3-2:1.0: USB hub found
[ 65.538058] hub 3-2:1.0: 5 ports detected
[ 66.252914] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
[ 66.399581] usb 3-2.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 66.399600] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 66.399611] usb 3-2.1: Product: USB2.0 Hub
[ 66.399620] usb 3-2.1: Manufacturer: VIA Labs, Inc.
[ 66.399628] usb 3-2.1: SerialNumber: 000000000
[ 66.401911] hub 3-2.1:1.0: USB hub found
[ 66.402119] hub 3-2.1:1.0: 4 ports detected
[ 66.648562] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[ 66.792198] usb 3-2.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 66.792214] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 66.792221] usb 3-2.4: Product: Mass Storage Device
[ 66.792227] usb 3-2.4: Manufacturer: Generic
[ 66.792232] usb 3-2.4: SerialNumber: 158F84688461
[ 66.794231] usb-storage 3-2.4:1.0: USB Mass Storage device detected
[ 66.794815] scsi host0: usb-storage 3-2.4:1.0
[ 67.056124] usb 3-2.1.3: new high-speed USB device number 5 using xhci_hcd
[ 67.153502] usb 3-2.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 67.153519] usb 3-2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 67.153526] usb 3-2.1.3: Product: USB 10/100/1000 LAN
[ 67.153532] usb 3-2.1.3: Manufacturer: Realtek
[ 67.153537] usb 3-2.1.3: SerialNumber: 000001
[ 67.236504] r8152-cfgselector 3-2.1.3: reset high-speed USB device number 5 using xhci_hcd
[ 67.377390] r8152 3-2.1.3:1.0 eth0: v1.12.13
[ 67.551846] r8152 3-2.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 67.813901] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 67.815643] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 67.816403] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 67.817004] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 67.817131] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 67.817846] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 67.817920] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 67.818504] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 69.949715] usb 3-2.5: new high-speed USB device number 6 using xhci_hcd
[ 70.135117] usb 3-2.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 70.135131] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 70.135138] usb 3-2.5: Product: USB Billboard Device
[ 70.135144] usb 3-2.5: Manufacturer: VIA Labs, Inc.
[ 70.135149] usb 3-2.5: SerialNumber: 0000000000000001
[ 70.146146] pci_bus 0000:04: Allocating resources
[ 70.146196] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 70.146219] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 70.146234] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 70.146253] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 70.146266] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 70.146286] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 70.146297] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 70.146309] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 70.146319] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 70.146341] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 70.146352] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 70.146365] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 70.146375] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 70.146386] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 70.146396] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 70.146406] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 70.146416] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 70.146429] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 70.146436] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 70.146451] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 70.146460] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 70.146473] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 70.146481] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 70.146492] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 70.146501] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 70.200759] r8152 3-2.1.3:1.0 enx00e04ceb9e75: carrier on
[ 75.911283] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 75.961255] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 75.961273] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 75.961282] usb 4-2: Product: USB3.0 Hub
[ 75.961288] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 75.961294] usb 4-2: SerialNumber: 000000000
[ 75.964464] hub 4-2:1.0: USB hub found
[ 75.964682] hub 4-2:1.0: 4 ports detected
[ 76.619148] usb 4-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 76.664251] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 76.664270] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 76.664278] usb 4-2.1: Product: USB3.0 Hub
[ 76.664285] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 76.664291] usb 4-2.1: SerialNumber: 000000000
[ 76.676957] hub 4-2.1:1.0: USB hub found
[ 76.677614] hub 4-2.1:1.0: 4 ports detected
[-- Attachment #4: 20250813--dell-xps-13-9370--linux-6.16-messages.txt --]
[-- Type: text/plain, Size: 254047 bytes --]
[ 0.000000] Linux version 6.16-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.16-1~exp1 (2025-07-31)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.16-amd64 root=UUID=118784b1-3045-408c-a9be-2a72336ae938 ro quiet log_buf_len=8M
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002c6c2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000002c6c3000-0x000000002c6c3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000002c6c4000-0x000000002c6c4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000002c6c5000-0x000000003dceffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003dcf0000-0x000000003e0affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003e0b0000-0x000000003e0fcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003e0fd000-0x000000003e7b4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003e7b5000-0x000000003fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002ae7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x3e0c0000 ACPI 2.0=0x3e0c0000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x3e756000 ESRT=0x3fdc1698 MEMATTR=0x3b1a9298 INITRD=0x2c7b6d98 TPMEventLog=0x3e0b7018
[ 0.000000] efi: Remove mem37: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem40: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem41: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9370/0RMYH9, BIOS 1.21.0 07/06/2022
[ 0.000000] DMI: Memory slots populated: 2/2
[ 0.000000] tsc: Detected 1900.000 MHz processor
[ 0.000000] tsc: Detected 1899.950 MHz TSC
[ 0.000661] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000663] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000672] last_pfn = 0x2ae800 max_arch_pfn = 0x400000000
[ 0.000677] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000679] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001034] last_pfn = 0x48e00 max_arch_pfn = 0x400000000
[ 0.007383] esrt: Reserving ESRT space from 0x000000003fdc1698 to 0x000000003fdc16d0.
[ 0.007389] Using GB pages for direct mapping
[ 0.018370] printk: log buffer data + meta data: 8388608 + 29360128 = 37748736 bytes
[ 0.018372] printk: early log buf free: 127408(97%)
[ 0.018373] RAMDISK: [mem 0x1f6ca000-0x236a4fff]
[ 0.018761] ACPI: Early table checksum verification disabled
[ 0.018764] ACPI: RSDP 0x000000003E0C0000 000024 (v02 DELL )
[ 0.018768] ACPI: XSDT 0x000000003E0C00C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.018773] ACPI: FACP 0x000000003E0E69D0 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.018779] ACPI: DSDT 0x000000003E0C0260 02676C (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.018782] ACPI: FACS 0x000000003E7B2180 000040
[ 0.018784] ACPI: APIC 0x000000003E0E6AE0 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.018787] ACPI: FPDT 0x000000003E0E6BA0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.018790] ACPI: FIDT 0x000000003E0E6BE8 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.018792] ACPI: MCFG 0x000000003E0E6C98 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.018795] ACPI: HPET 0x000000003E0E6CD8 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.018798] ACPI: SSDT 0x000000003E0E6D10 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.018801] ACPI: BOOT 0x000000003E0E7070 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.018804] ACPI: SSDT 0x000000003E0E7098 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.018807] ACPI: HPET 0x000000003E0E8378 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.018809] ACPI: SSDT 0x000000003E0E83B0 000CEF (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.018812] ACPI: UEFI 0x000000003E0E90A0 000042 (v01 00000000 00000000)
[ 0.018815] ACPI: SSDT 0x000000003E0E90E8 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.018818] ACPI: LPIT 0x000000003E0EA898 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.018821] ACPI: SSDT 0x000000003E0EA930 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.018824] ACPI: SSDT 0x000000003E0EAA98 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.018826] ACPI: SSDT 0x000000003E0EAD38 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.018829] ACPI: SSDT 0x000000003E0EDD40 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.018832] ACPI: DBGP 0x000000003E0EE258 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.018835] ACPI: DBG2 0x000000003E0EE290 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.018837] ACPI: SSDT 0x000000003E0EE2E8 000801 (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.018840] ACPI: SSDT 0x000000003E0EEAF0 00CFC3 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.018843] ACPI: MSDM 0x000000003E0FBAB8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.018846] ACPI: SLIC 0x000000003E0FBB10 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.018849] ACPI: NHLT 0x000000003E0FBC88 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.018851] ACPI: BGRT 0x000000003E0FBCB8 000038 (v00 01072009 AMI 00010013)
[ 0.018854] ACPI: TPM2 0x000000003E0FBCF0 000034 (v03 DELL CBX3 00000001 AMI 00000000)
[ 0.018857] ACPI: ASF! 0x000000003E0FBD28 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.018860] ACPI: DMAR 0x000000003E0FBDC8 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.018862] ACPI: Reserving FACP table memory at [mem 0x3e0e69d0-0x3e0e6adb]
[ 0.018863] ACPI: Reserving DSDT table memory at [mem 0x3e0c0260-0x3e0e69cb]
[ 0.018864] ACPI: Reserving FACS table memory at [mem 0x3e7b2180-0x3e7b21bf]
[ 0.018865] ACPI: Reserving APIC table memory at [mem 0x3e0e6ae0-0x3e0e6b9b]
[ 0.018866] ACPI: Reserving FPDT table memory at [mem 0x3e0e6ba0-0x3e0e6be3]
[ 0.018866] ACPI: Reserving FIDT table memory at [mem 0x3e0e6be8-0x3e0e6c93]
[ 0.018867] ACPI: Reserving MCFG table memory at [mem 0x3e0e6c98-0x3e0e6cd3]
[ 0.018868] ACPI: Reserving HPET table memory at [mem 0x3e0e6cd8-0x3e0e6d0f]
[ 0.018869] ACPI: Reserving SSDT table memory at [mem 0x3e0e6d10-0x3e0e7068]
[ 0.018869] ACPI: Reserving BOOT table memory at [mem 0x3e0e7070-0x3e0e7097]
[ 0.018870] ACPI: Reserving SSDT table memory at [mem 0x3e0e7098-0x3e0e8375]
[ 0.018871] ACPI: Reserving HPET table memory at [mem 0x3e0e8378-0x3e0e83af]
[ 0.018872] ACPI: Reserving SSDT table memory at [mem 0x3e0e83b0-0x3e0e909e]
[ 0.018872] ACPI: Reserving UEFI table memory at [mem 0x3e0e90a0-0x3e0e90e1]
[ 0.018873] ACPI: Reserving SSDT table memory at [mem 0x3e0e90e8-0x3e0ea895]
[ 0.018874] ACPI: Reserving LPIT table memory at [mem 0x3e0ea898-0x3e0ea92b]
[ 0.018875] ACPI: Reserving SSDT table memory at [mem 0x3e0ea930-0x3e0eaa90]
[ 0.018876] ACPI: Reserving SSDT table memory at [mem 0x3e0eaa98-0x3e0ead36]
[ 0.018876] ACPI: Reserving SSDT table memory at [mem 0x3e0ead38-0x3e0edd39]
[ 0.018877] ACPI: Reserving SSDT table memory at [mem 0x3e0edd40-0x3e0ee256]
[ 0.018878] ACPI: Reserving DBGP table memory at [mem 0x3e0ee258-0x3e0ee28b]
[ 0.018879] ACPI: Reserving DBG2 table memory at [mem 0x3e0ee290-0x3e0ee2e3]
[ 0.018879] ACPI: Reserving SSDT table memory at [mem 0x3e0ee2e8-0x3e0eeae8]
[ 0.018880] ACPI: Reserving SSDT table memory at [mem 0x3e0eeaf0-0x3e0fbab2]
[ 0.018881] ACPI: Reserving MSDM table memory at [mem 0x3e0fbab8-0x3e0fbb0c]
[ 0.018882] ACPI: Reserving SLIC table memory at [mem 0x3e0fbb10-0x3e0fbc85]
[ 0.018882] ACPI: Reserving NHLT table memory at [mem 0x3e0fbc88-0x3e0fbcb4]
[ 0.018883] ACPI: Reserving BGRT table memory at [mem 0x3e0fbcb8-0x3e0fbcef]
[ 0.018884] ACPI: Reserving TPM2 table memory at [mem 0x3e0fbcf0-0x3e0fbd23]
[ 0.018884] ACPI: Reserving ASF! table memory at [mem 0x3e0fbd28-0x3e0fbdc7]
[ 0.018885] ACPI: Reserving DMAR table memory at [mem 0x3e0fbdc8-0x3e0fbeb7]
[ 0.019087] No NUMA configuration found
[ 0.019088] Faking a node at [mem 0x0000000000000000-0x00000002ae7fffff]
[ 0.019100] NODE_DATA(0) allocated [mem 0x2ac3d5500-0x2ac3fffff]
[ 0.019297] Zone ranges:
[ 0.019297] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.019299] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.019301] Normal [mem 0x0000000100000000-0x00000002ae7fffff]
[ 0.019302] Device empty
[ 0.019303] Movable zone start for each node
[ 0.019305] Early memory node ranges
[ 0.019306] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.019307] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.019308] node 0: [mem 0x0000000000100000-0x000000002c6c2fff]
[ 0.019309] node 0: [mem 0x000000002c6c5000-0x000000003dceffff]
[ 0.019310] node 0: [mem 0x000000003ffff000-0x000000003fffffff]
[ 0.019311] node 0: [mem 0x0000000048000000-0x0000000048dfffff]
[ 0.019311] node 0: [mem 0x0000000100000000-0x00000002ae7fffff]
[ 0.019313] Initmem setup node 0 [mem 0x0000000000001000-0x00000002ae7fffff]
[ 0.019318] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.019320] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.019348] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.021885] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.021994] On node 0, zone DMA32: 8975 pages in unavailable ranges
[ 0.022716] On node 0, zone Normal: 29184 pages in unavailable ranges
[ 0.022775] On node 0, zone Normal: 6144 pages in unavailable ranges
[ 0.022785] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[ 0.023182] ACPI: PM-Timer IO Port: 0x1808
[ 0.023189] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.023191] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.023192] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.023192] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.023193] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.023194] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.023194] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.023195] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.023221] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.023229] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.023233] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.023237] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.023237] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.023244] e820: update [mem 0x3a6ab000-0x3a71efff] usable ==> reserved
[ 0.023255] TSC deadline timer available
[ 0.023259] CPU topo: Max. logical packages: 1
[ 0.023260] CPU topo: Max. logical dies: 1
[ 0.023260] CPU topo: Max. dies per package: 1
[ 0.023264] CPU topo: Max. threads per core: 2
[ 0.023264] CPU topo: Num. cores per package: 4
[ 0.023265] CPU topo: Num. threads per package: 8
[ 0.023266] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[ 0.023282] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.023284] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.023286] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.023287] PM: hibernation: Registered nosave memory: [mem 0x2c6c3000-0x2c6c4fff]
[ 0.023288] PM: hibernation: Registered nosave memory: [mem 0x3a6ab000-0x3a71efff]
[ 0.023290] PM: hibernation: Registered nosave memory: [mem 0x3dcf0000-0x3fffefff]
[ 0.023291] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x47ffffff]
[ 0.023293] PM: hibernation: Registered nosave memory: [mem 0x48e00000-0xffffffff]
[ 0.023294] [mem 0x4f800000-0xfdffffff] available for PCI devices
[ 0.023296] Booting paravirtualized kernel on bare hardware
[ 0.023298] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.028707] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.029165] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
[ 0.029171] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152
[ 0.029173] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.029196] Kernel command line: BOOT_IMAGE=/vmlinuz-6.16-amd64 root=UUID=118784b1-3045-408c-a9be-2a72336ae938 ro quiet log_buf_len=8M
[ 0.029260] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.16-amd64", will be passed to user space.
[ 0.029288] random: crng init done
[ 0.030606] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.031276] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.031428] software IO TLB: area num 8.
[ 0.053048] Fallback order for Node 0: 0
[ 0.053054] Built 1 zonelists, mobility grouping on. Total pages: 2019979
[ 0.053057] Policy zone: Normal
[ 0.053076] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.058607] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.058633] Kernel/User page tables isolation: enabled
[ 0.067986] ftrace: allocating 46350 entries in 184 pages
[ 0.067988] ftrace: allocated 184 pages with 4 groups
[ 0.068481] Dynamic Preempt: lazy
[ 0.068539] rcu: Preemptible hierarchical RCU implementation.
[ 0.068540] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.068541] Trampoline variant of Tasks RCU enabled.
[ 0.068542] Rude variant of Tasks RCU enabled.
[ 0.068542] Tracing variant of Tasks RCU enabled.
[ 0.068543] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.068544] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.068550] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.068552] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.068554] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.073348] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.073583] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.073759] Console: colour dummy device 80x25
[ 0.073762] printk: legacy console [tty0] enabled
[ 0.073802] ACPI: Core revision 20250404
[ 0.073979] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.074014] APIC: Switch to symmetric I/O mode setup
[ 0.074017] DMAR: Host address width 39
[ 0.074018] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.074025] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.074027] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.074031] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.074033] DMAR: RMRR base: 0x0000003ddca000 end: 0x0000003dde9fff
[ 0.074034] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[ 0.074036] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.074037] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.074038] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.074040] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.074041] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.075945] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.075947] x2apic enabled
[ 0.076194] APIC: Switched APIC routing to: cluster x2apic
[ 0.079996] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x36c5f9386c6, max_idle_ns: 881590416379 ns
[ 0.080002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3799.90 BogoMIPS (lpj=7599800)
[ 0.080055] CPU0: Thermal monitoring enabled (TM1)
[ 0.080101] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.080102] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4
[ 0.080106] process: using mwait in idle threads
[ 0.080110] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.080111] SRBDS: Mitigation: Microcode
[ 0.080113] Spectre V2 : Mitigation: IBRS
[ 0.080114] RETBleed: Mitigation: IBRS
[ 0.080115] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.080116] MDS: Mitigation: Clear CPU buffers
[ 0.080117] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.080118] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.080119] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.080120] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.080130] GDS: Mitigation: Microcode
[ 0.080136] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.080138] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.080139] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.080141] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.080142] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.080144] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.080145] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.080147] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.080148] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.084000] Freeing SMP alternatives memory: 44K
[ 0.084000] pid_max: default: 32768 minimum: 301
[ 0.084000] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm
[ 0.084000] landlock: Up and running.
[ 0.084000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.084000] AppArmor: AppArmor initialized
[ 0.084000] TOMOYO Linux initialized
[ 0.084000] LSM support for eBPF active
[ 0.084000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.084000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.084000] smpboot: CPU0: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[ 0.084000] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.084000] ... version: 4
[ 0.084000] ... bit width: 48
[ 0.084000] ... generic registers: 4
[ 0.084000] ... value mask: 0000ffffffffffff
[ 0.084000] ... max period: 00007fffffffffff
[ 0.084000] ... fixed-purpose events: 3
[ 0.084000] ... event mask: 000000070000000f
[ 0.084000] signal: max sigframe size: 2032
[ 0.084000] Estimated ratio of average max frequency by base frequency (times 1024): 1940
[ 0.084000] rcu: Hierarchical SRCU implementation.
[ 0.084000] rcu: Max phase no-delay instances is 1000.
[ 0.084000] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.084000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.084000] smp: Bringing up secondary CPUs ...
[ 0.084000] smpboot: x86: Booting SMP configuration:
[ 0.084000] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.085073] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.085073] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.085073] smp: Brought up 1 node, 8 CPUs
[ 0.085073] smpboot: Total of 8 processors activated (30399.20 BogoMIPS)
[ 0.105248] node 0 deferred pages initialised in 16ms
[ 0.105248] Memory: 7704216K/8079916K available (16695K kernel code, 3260K rwdata, 12284K rodata, 4360K init, 5656K bss, 362500K reserved, 0K cma-reserved)
[ 0.105248] devtmpfs: initialized
[ 0.105248] x86/mm: Memory block size: 128MB
[ 0.105248] ACPI: PM: Registering ACPI NVS region [mem 0x2c6c3000-0x2c6c3fff] (4096 bytes)
[ 0.105248] ACPI: PM: Registering ACPI NVS region [mem 0x3e0fd000-0x3e7b4fff] (7045120 bytes)
[ 0.105248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.105248] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.105248] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
[ 0.105248] pinctrl core: initialized pinctrl subsystem
[ 0.105248] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.105248] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.108043] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.108128] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.108140] audit: initializing netlink subsys (disabled)
[ 0.108152] audit: type=2000 audit(1755066019.028:1): state=initialized audit_enabled=0 res=1
[ 0.108152] thermal_sys: Registered thermal governor 'fair_share'
[ 0.108152] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.108152] thermal_sys: Registered thermal governor 'step_wise'
[ 0.108152] thermal_sys: Registered thermal governor 'user_space'
[ 0.108152] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.108152] cpuidle: using governor ladder
[ 0.108152] cpuidle: using governor menu
[ 0.108152] Simple Boot Flag at 0x47 set to 0x80
[ 0.108152] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.108152] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.108152] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.108163] PCI: Using configuration type 1 for base access
[ 0.108263] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.108263] HugeTLB: allocation took 0ms with hugepage_allocation_threads=2
[ 0.108263] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.108263] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.108263] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.108263] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.108278] ACPI: Added _OSI(Module Device)
[ 0.108278] ACPI: Added _OSI(Processor Device)
[ 0.108278] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.143095] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.147292] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.152719] ACPI: Dynamic OEM Table Load:
[ 0.152726] ACPI: SSDT 0xFFFF8EFBC1094400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.153624] ACPI: Dynamic OEM Table Load:
[ 0.153629] ACPI: SSDT 0xFFFF8EFBC141C800 0005AC (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.155159] ACPI: Dynamic OEM Table Load:
[ 0.155165] ACPI: SSDT 0xFFFF8EFBC00E6000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.156613] ACPI: Dynamic OEM Table Load:
[ 0.156618] ACPI: SSDT 0xFFFF8EFBC1093C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.157527] ACPI: Dynamic OEM Table Load:
[ 0.157532] ACPI: SSDT 0xFFFF8EFBC1097800 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.162075] ACPI: EC: EC started
[ 0.162077] ACPI: EC: interrupt blocked
[ 0.170051] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.170053] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.170055] ACPI: Interpreter enabled
[ 0.170091] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.170093] ACPI: Using IOAPIC for interrupt routing
[ 0.170131] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.170133] PCI: Using E820 reservations for host bridge windows
[ 0.170595] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.175559] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.197281] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.197287] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.197416] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[ 0.197645] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.197647] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.198412] PCI host bridge to bus 0000:00
[ 0.198415] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.198417] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.198420] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.198422] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window]
[ 0.198423] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.198425] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.198442] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 conventional PCI endpoint
[ 0.198539] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.198556] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[ 0.198559] pci 0000:00:02.0: BAR 2 [mem 0x50000000-0x5fffffff 64bit pref]
[ 0.198561] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.198573] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.198710] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[ 0.198730] pci 0000:00:04.0: BAR 0 [mem 0xdc320000-0xdc327fff 64bit]
[ 0.198968] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.199005] pci 0000:00:14.0: BAR 0 [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.199039] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.199458] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[ 0.199493] pci 0000:00:14.2: BAR 0 [mem 0xdc335000-0xdc335fff 64bit]
[ 0.199685] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[ 0.200002] pci 0000:00:15.0: BAR 0 [mem 0xdc334000-0xdc334fff 64bit]
[ 0.200516] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[ 0.200567] pci 0000:00:15.1: BAR 0 [mem 0xdc333000-0xdc333fff 64bit]
[ 0.200840] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.200887] pci 0000:00:16.0: BAR 0 [mem 0xdc332000-0xdc332fff 64bit]
[ 0.200932] pci 0000:00:16.0: PME# supported from D3hot
[ 0.201152] pci 0000:00:16.3: [8086:9d3d] type 00 class 0x070002 conventional PCI endpoint
[ 0.201184] pci 0000:00:16.3: BAR 0 [io 0xf060-0xf067]
[ 0.201187] pci 0000:00:16.3: BAR 1 [mem 0xdc331000-0xdc331fff]
[ 0.201298] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[ 0.201316] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.201321] pci 0000:00:1c.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.201376] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.201396] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 0.201746] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400 PCIe Root Port
[ 0.201764] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.201769] pci 0000:00:1c.2: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.201823] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.201843] pci 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled
[ 0.202181] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[ 0.202202] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.202207] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.202215] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.202269] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.202289] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 0.202634] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[ 0.202654] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.202659] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.202724] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.202746] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 0.203101] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 conventional PCI endpoint
[ 0.203329] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[ 0.203367] pci 0000:00:1f.2: BAR 0 [mem 0xdc32c000-0xdc32ffff]
[ 0.203541] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[ 0.203587] pci 0000:00:1f.3: BAR 0 [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.203593] pci 0000:00:1f.3: BAR 4 [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.203632] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.204144] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.204277] pci 0000:00:1f.4: BAR 0 [mem 0xdc330000-0xdc3300ff 64bit]
[ 0.204288] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 0.204557] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint
[ 0.204605] pci 0000:01:00.0: BAR 1 [mem 0xdc200000-0xdc200fff]
[ 0.204688] pci 0000:01:00.0: supports D1 D2
[ 0.204690] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.204855] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.205261] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000 PCIe Endpoint
[ 0.205389] pci 0000:02:00.0: BAR 0 [mem 0xdc100000-0xdc101fff 64bit]
[ 0.205577] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.206328] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.206419] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.206712] pci 0000:6e:00.0: [144d:a808] type 00 class 0x010802 PCIe Endpoint
[ 0.206755] pci 0000:6e:00.0: BAR 0 [mem 0xdc000000-0xdc003fff 64bit]
[ 0.207186] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.209420] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.209420] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.209420] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.209420] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.209420] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.209420] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.209420] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.209420] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.217862] Low-power S0 idle used by default for system suspend
[ 0.222210] ACPI: EC: interrupt unblocked
[ 0.222212] ACPI: EC: event unblocked
[ 0.222218] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.222219] ACPI: EC: GPE=0x6e
[ 0.222221] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.222224] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.223071] iommu: Default domain type: Translated
[ 0.223071] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.223071] pps_core: LinuxPPS API ver. 1 registered
[ 0.223071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.223071] PTP clock support registered
[ 0.223071] EDAC MC: Ver: 3.0.0
[ 0.224406] efivars: Registered efivars operations
[ 0.224494] NetLabel: Initializing
[ 0.224494] NetLabel: domain hash size = 128
[ 0.224494] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.224494] NetLabel: unlabeled traffic allowed by default
[ 0.224494] PCI: Using ACPI for IRQ routing
[ 0.245584] PCI: pci_cache_line_size set to 64 bytes
[ 0.246507] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.246509] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.246510] e820: reserve RAM buffer [mem 0x2c6c3000-0x2fffffff]
[ 0.246512] e820: reserve RAM buffer [mem 0x3a6ab000-0x3bffffff]
[ 0.246513] e820: reserve RAM buffer [mem 0x3dcf0000-0x3fffffff]
[ 0.246515] e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
[ 0.246516] e820: reserve RAM buffer [mem 0x2ae800000-0x2afffffff]
[ 0.246575] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.246575] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.246575] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.246575] vgaarb: loaded
[ 0.246575] clocksource: Switched to clocksource tsc-early
[ 0.246575] VFS: Disk quotas dquot_6.6.0
[ 0.246575] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.246575] AppArmor: AppArmor Filesystem Enabled
[ 0.246575] pnp: PnP ACPI init
[ 0.246575] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.246575] system 00:00: [io 0xffff] has been reserved
[ 0.246575] system 00:00: [io 0xffff] has been reserved
[ 0.246575] system 00:00: [io 0xffff] has been reserved
[ 0.246575] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.246575] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.246575] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.246575] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.246575] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.246575] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.246575] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.246575] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.246575] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.246575] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.246575] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.246575] system 00:04: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.246575] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.246575] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.246575] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.246575] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.246575] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.246575] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.246575] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.246575] system 00:06: [io 0xff00-0xfffe] has been reserved
[ 0.246767] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.246770] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.250007] pnp: PnP ACPI: found 8 devices
[ 0.255822] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.255885] NET: Registered PF_INET protocol family
[ 0.255985] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.268523] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.268540] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.268560] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.268698] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.268901] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.268965] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.269025] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.269068] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.269150] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.269158] NET: Registered PF_XDP protocol family
[ 0.269168] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 1000
[ 0.269179] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]: assigned
[ 0.269184] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.269188] pci 0000:00:1c.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.269194] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.269198] pci 0000:00:1c.2: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.269203] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.269207] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.269211] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.269214] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.269219] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.269229] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.269236] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.269238] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.269239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.269241] pci_bus 0000:00: resource 7 [mem 0x4f800000-0xdfffffff window]
[ 0.269242] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.269246] pci_bus 0000:01: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.269250] pci_bus 0000:02: resource 1 [mem 0xdc100000-0xdc1fffff]
[ 0.269253] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.269255] pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
[ 0.269256] pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.269261] pci_bus 0000:6e: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 0.270140] PCI: CLS 0 bytes, default 64
[ 0.270200] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[ 0.270420] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.270605] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.0
[ 0.270608] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.1
[ 0.270618] DMAR: No ATSR found
[ 0.270619] DMAR: No SATC found
[ 0.270620] DMAR: dmar0: Using Queued invalidation
[ 0.270624] DMAR: dmar1: Using Queued invalidation
[ 0.270701] Trying to unpack rootfs image as initramfs...
[ 0.271208] pci 0000:00:02.0: Adding to iommu group 0
[ 0.271244] pci 0000:00:00.0: Adding to iommu group 1
[ 0.271254] pci 0000:00:04.0: Adding to iommu group 2
[ 0.271269] pci 0000:00:14.0: Adding to iommu group 3
[ 0.271277] pci 0000:00:14.2: Adding to iommu group 3
[ 0.271291] pci 0000:00:15.0: Adding to iommu group 4
[ 0.271299] pci 0000:00:15.1: Adding to iommu group 4
[ 0.271313] pci 0000:00:16.0: Adding to iommu group 5
[ 0.271328] pci 0000:00:16.3: Adding to iommu group 5
[ 0.271342] pci 0000:00:1c.0: Adding to iommu group 6
[ 0.271352] pci 0000:00:1c.2: Adding to iommu group 7
[ 0.271364] pci 0000:00:1c.4: Adding to iommu group 8
[ 0.271382] pci 0000:00:1d.0: Adding to iommu group 9
[ 0.271401] pci 0000:00:1f.0: Adding to iommu group 10
[ 0.271410] pci 0000:00:1f.2: Adding to iommu group 10
[ 0.271419] pci 0000:00:1f.3: Adding to iommu group 10
[ 0.271429] pci 0000:00:1f.4: Adding to iommu group 10
[ 0.271438] pci 0000:01:00.0: Adding to iommu group 11
[ 0.271472] pci 0000:02:00.0: Adding to iommu group 12
[ 0.271490] pci 0000:6e:00.0: Adding to iommu group 13
[ 0.272381] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.272384] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.272385] software IO TLB: mapped [mem 0x00000000366ab000-0x000000003a6ab000] (64MB)
[ 0.272442] sgx: EPC section 0x40200000-0x45f7ffff
[ 0.273114] sgx: SGX disabled: SGX launch control CPU feature is not available, /dev/sgx_enclave disabled.
[ 0.312400] Initialise system trusted keyrings
[ 0.312411] Key type blacklist registered
[ 0.312638] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.312790] fuse: init (API version 7.44)
[ 0.313000] integrity: Platform Keyring initialized
[ 0.313006] integrity: Machine keyring initialized
[ 0.327826] Key type asymmetric registered
[ 0.327833] Asymmetric key parser 'x509' registered
[ 0.389635] Freeing initrd memory: 65388K
[ 0.395063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.395182] io scheduler mq-deadline registered
[ 0.396521] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.399928] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.399944] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.400126] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.400713] serial 0000:00:16.3: enabling device (0000 -> 0003)
[ 0.401302] 0000:00:16.3: ttyS0 at I/O 0xf060 (irq = 19, base_baud = 115200) is a 16550A
[ 0.401535] hpet_acpi_add: no address or irqs in _CRS
[ 0.401562] Linux agpgart interface v0.103
[ 0.428575] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[ 0.493022] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.493302] i8042: Warning: Keylock active
[ 0.494732] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.494751] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.494860] mousedev: PS/2 mouse device common for all mice
[ 0.494897] rtc_cmos 00:01: RTC can wake from S4
[ 0.495628] rtc_cmos 00:01: registered as rtc0
[ 0.495758] rtc_cmos 00:01: setting system clock to 2025-08-13T06:20:19 UTC (1755066019)
[ 0.495801] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.496074] intel_pstate: Intel P-state driver initializing
[ 0.496323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.496716] intel_pstate: HWP enabled
[ 0.497079] efifb: probing for efifb
[ 0.497092] efifb: framebuffer at 0x50000000, using 32400k, total 32400k
[ 0.497094] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[ 0.497096] efifb: scrolling: redraw
[ 0.497097] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.497180] Console: switching to colour frame buffer device 240x67
[ 0.501923] fb0: EFI VGA frame buffer device
[ 0.502109] NET: Registered PF_INET6 protocol family
[ 0.507351] Segment Routing with IPv6
[ 0.507354] RPL Segment Routing with IPv6
[ 0.507368] In-situ OAM (IOAM) with IPv6
[ 0.507399] mip6: Mobile IPv6
[ 0.507404] NET: Registered PF_PACKET protocol family
[ 0.507527] mpls_gso: MPLS GSO support
[ 0.508676] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.508988] microcode: Current revision: 0x000000f6
[ 0.508990] microcode: Updated early from: 0x000000f0
[ 0.531181] IPI shorthand broadcast: enabled
[ 0.533154] sched_clock: Marking stable (524872664, 6290939)->(574543919, -43380316)
[ 0.533463] registered taskstats version 1
[ 0.533683] Loading compiled-in X.509 certificates
[ 0.566675] Loaded X.509 cert 'Build time autogenerated kernel key: 50e519f1b0da18d271347d4748988ecfb9f2908c'
[ 0.568923] Demotion targets for Node 0: null
[ 0.568962] Key type .fscrypt registered
[ 0.568964] Key type fscrypt-provisioning registered
[ 0.583983] Key type encrypted registered
[ 0.583990] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.585589] integrity: Loading X.509 certificate: UEFI:db
[ 0.585612] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 0.585613] integrity: Loading X.509 certificate: UEFI:db
[ 0.585631] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.585632] integrity: Loading X.509 certificate: UEFI:db
[ 0.585657] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.587734] ima: Allocated hash algorithm: sha256
[ 0.616519] ima: No architecture policies found
[ 0.616581] evm: Initialising EVM extended attributes:
[ 0.616584] evm: security.selinux
[ 0.616588] evm: security.SMACK64 (disabled)
[ 0.616591] evm: security.SMACK64EXEC (disabled)
[ 0.616594] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.616596] evm: security.SMACK64MMAP (disabled)
[ 0.616599] evm: security.apparmor
[ 0.616602] evm: security.ima
[ 0.616604] evm: security.capability
[ 0.616607] evm: HMAC attrs: 0x1
[ 0.643250] RAS: Correctable Errors collector initialized.
[ 0.650564] clk: Disabling unused clocks
[ 0.650569] PM: genpd: Disabling unused power domains
[ 0.652152] Freeing unused decrypted memory: 2028K
[ 0.653084] Freeing unused kernel image (initmem) memory: 4360K
[ 0.653200] Write protecting the kernel read-only data: 30720k
[ 0.654290] Freeing unused kernel image (text/rodata gap) memory: 1736K
[ 0.654405] Freeing unused kernel image (rodata/data gap) memory: 4K
[ 0.697726] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.697728] x86/mm: Checking user space page tables
[ 0.736664] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.736669] Run /init as init process
[ 0.736670] with arguments:
[ 0.736672] /init
[ 0.736673] with environment:
[ 0.736674] HOME=/
[ 0.736675] TERM=linux
[ 0.736676] BOOT_IMAGE=/vmlinuz-6.16-amd64
[ 1.029298] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found
[ 1.031259] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1.031301] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.036670] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 1.040482] platform idma64.0: Adding to iommu group 14
[ 1.040672] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 1.040946] platform i2c_designware.0: Adding to iommu group 15
[ 1.066135] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 1.077063] ACPI: bus type USB registered
[ 1.077103] usbcore: registered new interface driver usbfs
[ 1.077115] usbcore: registered new interface driver hub
[ 1.077131] usbcore: registered new device driver usb
[ 1.096550] ACPI: bus type thunderbolt registered
[ 1.098428] ACPI: battery: Slot [BAT0] (battery present)
[ 1.115609] Key type psk registered
[ 1.123879] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 1.124151] platform idma64.1: Adding to iommu group 16
[ 1.124354] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 1.124391] platform i2c_designware.1: Adding to iommu group 17
[ 1.151281] iTCO_vendor_support: vendor-support=0
[ 1.152006] ACPI: bus type drm_connector registered
[ 1.172007] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 1.172638] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.173659] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.173669] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.174807] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 1.175339] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.175343] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.175346] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.175438] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16
[ 1.175441] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.175443] usb usb1: Product: xHCI Host Controller
[ 1.175445] usb usb1: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 1.175446] usb usb1: SerialNumber: 0000:00:14.0
[ 1.175634] hub 1-0:1.0: USB hub found
[ 1.175656] hub 1-0:1.0: 12 ports detected
[ 1.177139] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16
[ 1.177143] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.177146] usb usb2: Product: xHCI Host Controller
[ 1.177147] usb usb2: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 1.177149] usb usb2: SerialNumber: 0000:00:14.0
[ 1.177284] hub 2-0:1.0: USB hub found
[ 1.177301] hub 2-0:1.0: 6 ports detected
[ 1.179396] hid: raw HID events driver (C) Jiri Kosina
[ 1.180055] nvme nvme0: pci function 0000:6e:00.0
[ 1.187041] nvme nvme0: D3 entry latency set to 8 seconds
[ 1.196076] nvme nvme0: 8/0/0 default/read/poll queues
[ 1.199635] nvme0n1: p1 p2 p3 p4
[ 1.294331] tsc: Refined TSC clocksource calibration: 1896.003 MHz
[ 1.294353] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a8d847fd3, max_idle_ns: 881590420388 ns
[ 1.294451] clocksource: Switched to clocksource tsc
[ 1.301903] i2c_hid_acpi i2c-ELAN24EE:00: i2c_hid_get_input: IRQ triggered but there's no data
[ 1.396958] input: ELAN24EE:00 04F3:24EE Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input7
[ 1.397159] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input8
[ 1.397225] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input9
[ 1.397345] hid-generic 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 1.398678] input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input11
[ 1.398863] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input12
[ 1.399053] hid-generic 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 1.426312] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.629372] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input14
[ 1.629544] input: ELAN24EE:00 04F3:24EE UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input15
[ 1.629591] input: ELAN24EE:00 04F3:24EE UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input16
[ 1.629710] hid-multitouch 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 1.707634] input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input18
[ 1.707735] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input19
[ 1.707831] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 1.730568] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
[ 1.730574] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.730576] usb 1-5: Product: Integrated_Webcam_HD
[ 1.730578] usb 1-5: Manufacturer: CN0FFMHCLOG0087LB412A01
[ 1.730580] usb 1-5: SerialNumber: 200901010001
[ 1.755381] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.755417] device-mapper: uevent: version 1.0.3
[ 1.755659] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 1.862305] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.999559] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[ 1.999563] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.118324] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[ 2.260858] usb 1-10: New USB device found, idVendor=27c6, idProduct=5385, bcdDevice= 1.00
[ 2.260871] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.260878] usb 1-10: Product: Goodix Fingerprint Device
[ 2.260883] usb 1-10: Manufacturer: HTMicroelectronics
[ 2.260888] usb 1-10: SerialNumber: HTK32
[ 13.754324] psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5
[ 14.246323] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 15.337212] PM: Image not found (code -22)
[ 15.503126] EXT4-fs (dm-0): orphan cleanup on readonly fs
[ 15.503480] EXT4-fs (dm-0): mounted filesystem 118784b1-3045-408c-a9be-2a72336ae938 ro with ordered data mode. Quota mode: none.
[ 15.558983] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 15.617918] systemd[1]: Inserted module 'autofs4'
[ 15.802149] systemd[1]: systemd 258~rc2-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 15.802156] systemd[1]: Detected architecture x86-64.
[ 15.805665] systemd[1]: Hostname set to <glinka>.
[ 15.997844] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 16.026315] systemd-sysv-generator[805]: SysV service '/etc/init.d/isc-dhcp-server' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 16.026324] systemd-sysv-generator[805]: Please update package to include a native systemd unit file.
[ 16.026328] systemd-sysv-generator[805]: ! This compatibility logic is deprecated, expect removal soon. !
[ 16.157584] systemd[1]: Queued start job for default target graphical.target.
[ 16.196638] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 16.197159] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 16.197551] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 16.197835] systemd[1]: Created slice user.slice - User and Session Slice.
[ 16.197931] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 16.197991] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 16.198235] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 16.198275] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 16.198282] systemd[1]: Expecting device dev-disk-by\x2duuid-22D6\x2d7D2A.device - /dev/disk/by-uuid/22D6-7D2A...
[ 16.198291] systemd[1]: Expecting device dev-nvme0n1p2.device - /dev/nvme0n1p2...
[ 16.198347] systemd[1]: Reached target imports.target - Image Downloads.
[ 16.198396] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 16.198412] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 16.198424] systemd[1]: Reached target slices.target - Slice Units.
[ 16.199735] systemd[1]: Listening on systemd-ask-password.socket - Query the User Interactively for a Password.
[ 16.201241] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 16.202181] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 16.203241] systemd[1]: Listening on systemd-factory-reset.socket - Factory Reset Management.
[ 16.203367] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 16.203478] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 16.203532] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 16.203549] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 16.203636] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 16.203713] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 16.203786] systemd[1]: Listening on systemd-udevd-varlink.socket - udev Varlink Socket.
[ 16.205007] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 16.205996] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 16.206929] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 16.207859] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 16.209955] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 16.211704] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 16.213642] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 16.213735] systemd[1]: modprobe@drm.service - Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm).
[ 16.215948] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 16.215999] systemd[1]: modprobe@fuse.service - Load Kernel Module fuse was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!fuse).
[ 16.217420] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 16.217611] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 16.217676] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 16.221127] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 16.224831] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 16.224895] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 16.227212] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 16.227289] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 16.228857] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 16.230140] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 16.233919] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 16.234071] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 16.234214] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 16.234392] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 16.234861] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 16.235277] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 16.235457] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 16.237169] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 16.238027] pstore: Using crash dump compression: deflate
[ 16.262745] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 16.265089] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 16.285113] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 16.304833] pstore: Registered efi_pstore as persistent store backend
[ 16.304992] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 16.305606] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 16.305926] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 16.312154] systemd-journald[819]: Collecting audit messages is disabled.
[ 16.313033] EXT4-fs (dm-0): re-mounted 118784b1-3045-408c-a9be-2a72336ae938 r/w.
[ 16.313552] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 16.314247] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 16.314762] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 16.314851] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 16.316292] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 16.316330] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 16.320317] lp: driver loaded but no devices found
[ 16.324848] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 16.325094] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 16.327557] systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization...
[ 16.328892] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 16.329876] ppdev: user-space parallel port driver
[ 16.343659] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 16.350901] i2c_dev: i2c /dev entries driver
[ 16.351040] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 16.351239] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 16.353053] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 16.385508] systemd[1]: Started systemd-journald.service - Journal Service.
[ 16.403227] systemd-journald[819]: Received client request to flush runtime journal.
[ 16.756987] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input21
[ 16.775053] ACPI: AC: AC Adapter [AC] (off-line)
[ 16.775230] ACPI: button: Lid Switch [LID0]
[ 16.776336] input: Intel HID events as /devices/platform/INT33D5:00/input/input22
[ 16.776855] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input23
[ 16.778057] intel-hid INT33D5:00: platform supports 5 button array
[ 16.786398] ACPI: button: Power Button [PBTN]
[ 16.786497] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input25
[ 16.786995] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input24
[ 16.788707] ACPI: button: Sleep Button [SBTN]
[ 16.792398] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input26
[ 16.792928] ACPI: button: Power Button [PWRF]
[ 16.834599] intel_pmc_core INT33A1:00: initialized
[ 17.004176] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 17.034256] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 17.041614] intel_rapl_common: Found RAPL domain package
[ 17.041620] intel_rapl_common: Found RAPL domain dram
[ 17.068835] input: PC Speaker as /devices/platform/pcspkr/input/input27
[ 17.125631] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 17.145492] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 17.185715] mc: Linux media interface: v0.10
[ 17.249294] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 17.263182] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 17.263414] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 17.263648] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 17.263876] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 17.285536] dell_smm_hwmon: Enabling support for setting automatic/manual fan control
[ 17.291054] Bluetooth: Core ver 2.22
[ 17.291084] NET: Registered PF_BLUETOOTH protocol family
[ 17.291086] Bluetooth: HCI device and connection manager initialized
[ 17.291094] Bluetooth: HCI socket layer initialized
[ 17.291097] Bluetooth: L2CAP socket layer initialized
[ 17.291102] Bluetooth: SCO socket layer initialized
[ 17.291197] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input28
[ 17.331324] cdc_acm 1-10:1.0: ttyACM0: USB ACM device
[ 17.331851] usbcore: registered new interface driver cdc_acm
[ 17.331855] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 17.378532] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 17.378539] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 17.378541] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 17.378543] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 17.378544] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 17.378546] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 17.393159] ACPI: battery: new hook: Dell Primary Battery Extension
[ 17.402690] videodev: Linux video capture interface: v2.00
[ 17.414023] intel_rapl_common: Found RAPL domain package
[ 17.414030] intel_rapl_common: Found RAPL domain core
[ 17.414032] intel_rapl_common: Found RAPL domain uncore
[ 17.414035] intel_rapl_common: Found RAPL domain dram
[ 17.414037] intel_rapl_common: Found RAPL domain psys
[ 17.426082] EXT4-fs (nvme0n1p2): mounted filesystem ce715364-82d6-4b2d-8883-63f17a6b61e8 r/w with ordered data mode. Quota mode: none.
[ 17.453625] Intel(R) Wireless WiFi driver for Linux
[ 17.454056] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 17.459942] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 17.461020] Bluetooth: hci0: Device revision is 16
[ 17.461024] Bluetooth: hci0: Secure boot is enabled
[ 17.461026] Bluetooth: hci0: OTP lock is enabled
[ 17.461028] Bluetooth: hci0: API lock is enabled
[ 17.461030] Bluetooth: hci0: Debug lock is disabled
[ 17.461032] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 17.462610] usbcore: registered new interface driver btusb
[ 17.463560] iwlwifi 0000:02:00.0: Detected crf-id 0xbadcafe, cnv-id 0x10 wfpm id 0x80000000
[ 17.463688] iwlwifi 0000:02:00.0: PCI dev 24fd/8050, rev=0x230, rfid=0xd55555d5
[ 17.463693] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless-AC 8265
[ 17.467149] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 17.487100] iwlwifi 0000:02:00.0: loaded firmware version 36.ca7b901d.0 8265-36.ucode op_mode iwlmvm
[ 17.501570] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 17.660511] usb 1-5: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
[ 17.670491] usb 1-5: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
[ 17.673460] usbcore: registered new interface driver uvcvideo
[ 18.119818] i915 0000:00:02.0: [drm] Found kabylake (device ID 5917) integrated display version 9.00 stepping C0
[ 18.155428] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 18.155813] Console: switching to colour dummy device 80x25
[ 18.155854] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 18.155967] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 18.157923] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 18.159988] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 18.209363] audit: type=1400 audit(1755066037.206:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=1015 comm="apparmor_parser"
[ 18.209372] audit: type=1400 audit(1755066037.206:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=1014 comm="apparmor_parser"
[ 18.209375] audit: type=1400 audit(1755066037.206:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=1018 comm="apparmor_parser"
[ 18.209378] audit: type=1400 audit(1755066037.206:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=1013 comm="apparmor_parser"
[ 18.209380] audit: type=1400 audit(1755066037.206:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=1012 comm="apparmor_parser"
[ 18.209382] audit: type=1400 audit(1755066037.206:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=1021 comm="apparmor_parser"
[ 18.210139] audit: type=1400 audit(1755066037.206:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=1023 comm="apparmor_parser"
[ 18.210580] audit: type=1400 audit(1755066037.210:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=1022 comm="apparmor_parser"
[ 18.212034] audit: type=1400 audit(1755066037.210:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=1019 comm="apparmor_parser"
[ 18.212354] audit: type=1400 audit(1755066037.210:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=1017 comm="apparmor_parser"
[ 18.224913] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 18.246606] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 18.249148] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 18.249948] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input29
[ 18.283365] fbcon: i915drmfb (fb0) is primary device
[ 18.290335] Console: switching to colour frame buffer device 240x67
[ 18.290315] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
[ 18.312818] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 18.354460] iwlwifi 0000:02:00.0: base HW address: 38:ba:f8:94:0a:e8, OTP minor version: 0x0
[ 18.420728] snd_hda_codec_realtek hdaudioC0D0: ALC3271: picked fixup (pin match)
[ 18.421240] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 18.421248] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.421252] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 18.421255] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 18.421257] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 18.421259] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 18.421262] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 18.421264] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
[ 18.478457] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 18.493593] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 18.570453] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
[ 18.774307] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 19.178792] Bluetooth: hci0: Waiting for firmware download to complete
[ 19.178945] Bluetooth: hci0: Firmware loaded in 1671668 usecs
[ 19.179035] Bluetooth: hci0: Waiting for device to boot
[ 19.191964] Bluetooth: hci0: Device booted in 12689 usecs
[ 19.199938] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 19.202988] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 19.203984] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021
[ 19.205980] Bluetooth: hci0: Reading supported features failed (-16)
[ 19.206002] Bluetooth: hci0: Error reading debug features
[ 19.206007] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 19.314881] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 19.314940] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 19.314992] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 19.315035] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[ 32.140294] kauditd_printk_skb: 114 callbacks suppressed
[ 32.140299] audit: type=1400 audit(1755066051.138:126): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=1129 comm="apparmor_parser"
[ 32.141233] audit: type=1400 audit(1755066051.138:127): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=1129 comm="apparmor_parser"
[ 32.252102] nvme nvme0: using unchecked data buffer
[ 32.261918] Process accounting resumed
[ 32.280406] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.280412] Bluetooth: BNEP filters: protocol multicast
[ 32.280418] Bluetooth: BNEP socket layer initialized
[ 32.294391] Bluetooth: MGMT ver 1.23
[ 32.309876] NET: Registered PF_ALG protocol family
[ 32.385999] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 32.412164] Bluetooth: RFCOMM TTY layer initialized
[ 32.412173] Bluetooth: RFCOMM socket layer initialized
[ 32.412179] Bluetooth: RFCOMM ver 1.11
[ 32.416750] block nvme0n1: No UUID available providing old NGUID
[ 32.503227] NET: Registered PF_QIPCRTR protocol family
[ 32.698022] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[ 33.078501] audit: type=1400 audit(1755066052.074:128): apparmor="DENIED" operation="open" class="file" profile="/usr/sbin/cupsd" name="/etc/paperspecs" pid=1332 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 33.103092] audit: type=1400 audit(1755066052.102:129): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=1332 comm="cupsd" capability=12 capname="net_admin"
[ 33.174962] Initializing XFRM netlink socket
[ 33.219608] IPsec XFRM device driver
[ 35.586493] rfkill: input handler disabled
[ 48.868445] rfkill: input handler enabled
[ 52.454851] rfkill: input handler disabled
[ 54.859117] SCSI subsystem initialized
[ 84.196792] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Upstream Port
[ 84.196859] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 84.196885] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 84.196913] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 84.196943] pci 0000:03:00.0: enabling Extended Tags
[ 84.197432] pci 0000:03:00.0: supports D1 D2
[ 84.197440] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 84.198404] pci 0000:03:00.0: Adding to iommu group 18
[ 84.200609] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 84.200673] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 84.200696] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 84.200750] pci 0000:04:00.0: enabling Extended Tags
[ 84.333859] pci 0000:04:00.0: supports D1 D2
[ 84.333863] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 84.334194] pci 0000:04:00.0: Adding to iommu group 19
[ 84.334370] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 84.334410] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 84.334423] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 84.334440] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 84.334460] pci 0000:04:01.0: enabling Extended Tags
[ 84.334579] pci 0000:04:01.0: supports D1 D2
[ 84.334583] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 84.334905] pci 0000:04:01.0: Adding to iommu group 20
[ 84.335075] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 84.335114] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 84.335128] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 84.335160] pci 0000:04:02.0: enabling Extended Tags
[ 84.335276] pci 0000:04:02.0: supports D1 D2
[ 84.335280] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 84.335556] pci 0000:04:02.0: Adding to iommu group 21
[ 84.335739] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 84.335778] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 84.335792] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 84.335808] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 84.335828] pci 0000:04:04.0: enabling Extended Tags
[ 84.335946] pci 0000:04:04.0: supports D1 D2
[ 84.335950] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 84.336240] pci 0000:04:04.0: Adding to iommu group 22
[ 84.336409] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 84.336510] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 84.336600] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 84.336744] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint
[ 84.336816] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff]
[ 84.336841] pci 0000:39:00.0: enabling Extended Tags
[ 84.336981] pci 0000:39:00.0: supports D1 D2
[ 84.336985] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 84.337349] pci 0000:39:00.0: Adding to iommu group 21
[ 84.337431] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 84.337521] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 84.337579] pci_bus 0000:04: Allocating resources
[ 84.337601] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 84.337607] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 84.337612] pci 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 84.337619] pci 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 84.337623] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 84.337628] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 84.337633] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 84.337640] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 84.337644] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 84.337649] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 84.337652] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 84.337661] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 84.337665] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 84.337669] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.337672] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 84.337691] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.337694] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 84.337697] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.337700] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 84.337704] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.337708] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 84.337712] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 84.337716] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 84.337719] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.337722] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 84.337726] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.337729] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 84.337733] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 84.337741] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 84.337753] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 84.337760] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 84.337766] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 84.337775] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 84.337782] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 84.337793] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 84.337800] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 84.337806] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 84.337814] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 84.337821] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 84.337827] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 84.339011] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 84.339034] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 84.340278] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 84.340805] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 84.340813] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 84.340819] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 84.340894] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16
[ 84.340899] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 84.340903] usb usb3: Product: xHCI Host Controller
[ 84.340906] usb usb3: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 84.340909] usb usb3: SerialNumber: 0000:39:00.0
[ 84.341256] hub 3-0:1.0: USB hub found
[ 84.341273] hub 3-0:1.0: 2 ports detected
[ 84.342067] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16
[ 84.342073] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 84.342077] usb usb4: Product: xHCI Host Controller
[ 84.342081] usb usb4: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 84.342084] usb usb4: SerialNumber: 0000:39:00.0
[ 84.342386] hub 4-0:1.0: USB hub found
[ 84.342407] hub 4-0:1.0: 2 ports detected
[ 84.350671] pci_bus 0000:04: Allocating resources
[ 84.350695] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 84.350703] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 84.350709] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 84.350716] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 84.350721] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 84.350726] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 84.350732] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 84.350739] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 84.350743] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 84.350747] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 84.350750] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 84.350759] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 84.350763] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 84.350766] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.350770] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 84.350773] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.350776] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 84.350779] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.350782] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 84.350787] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.350790] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 84.350794] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 84.350798] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 84.350802] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.350805] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 84.350808] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 84.350811] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 84.586491] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 84.724117] usb 3-2: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 84.724129] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 84.724137] usb 3-2: Product: USB2.0 Hub
[ 84.724142] usb 3-2: Manufacturer: VIA Labs, Inc.
[ 84.724147] usb 3-2: SerialNumber: 000000000
[ 84.725611] hub 3-2:1.0: USB hub found
[ 84.725816] hub 3-2:1.0: 5 ports detected
[ 85.454633] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
[ 85.597721] usb 3-2.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 85.597739] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 85.597746] usb 3-2.1: Product: USB2.0 Hub
[ 85.597753] usb 3-2.1: Manufacturer: VIA Labs, Inc.
[ 85.597758] usb 3-2.1: SerialNumber: 000000000
[ 85.603235] hub 3-2.1:1.0: USB hub found
[ 85.603612] hub 3-2.1:1.0: 4 ports detected
[ 85.974593] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[ 86.115463] usb 3-2.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 86.115483] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 86.115492] usb 3-2.4: Product: Mass Storage Device
[ 86.115500] usb 3-2.4: Manufacturer: Generic
[ 86.115506] usb 3-2.4: SerialNumber: 158F84688461
[ 86.223287] usb-storage 3-2.4:1.0: USB Mass Storage device detected
[ 86.224162] scsi host0: usb-storage 3-2.4:1.0
[ 86.224808] usbcore: registered new interface driver usb-storage
[ 86.253867] usbcore: registered new interface driver uas
[ 86.278388] usb 3-2.1.3: new high-speed USB device number 5 using xhci_hcd
[ 86.371834] usb 3-2.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 86.371845] usb 3-2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 86.371849] usb 3-2.1.3: Product: USB 10/100/1000 LAN
[ 86.371853] usb 3-2.1.3: Manufacturer: Realtek
[ 86.371857] usb 3-2.1.3: SerialNumber: 000001
[ 86.605839] usbcore: registered new device driver r8152-cfgselector
[ 86.679207] r8152-cfgselector 3-2.1.3: reset high-speed USB device number 5 using xhci_hcd
[ 86.832991] r8152 3-2.1.3:1.0 eth0: v1.12.13
[ 86.833142] usbcore: registered new interface driver r8152
[ 86.908661] usbcore: registered new interface driver cdc_ether
[ 86.933656] usbcore: registered new interface driver r8153_ecm
[ 87.073499] r8152 3-2.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 87.248580] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 87.250294] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 87.252480] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 87.253409] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 87.278977] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 87.283186] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 87.325959] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 87.326153] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 89.402340] usb 3-2.5: new high-speed USB device number 6 using xhci_hcd
[ 89.491357] usb 3-2.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 89.491374] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 89.491382] usb 3-2.5: Product: USB Billboard Device
[ 89.491388] usb 3-2.5: Manufacturer: VIA Labs, Inc.
[ 89.491394] usb 3-2.5: SerialNumber: 0000000000000001
[ 89.590666] r8152 3-2.1.3:1.0 enx00e04ceb9e75: carrier on
[ 93.801470] r8152 3-2.1.3:1.0 enx00e04ceb9e75: entered promiscuous mode
[ 93.802243] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 97.794835] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 97.839285] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 97.839304] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 97.839313] usb 4-2: Product: USB3.0 Hub
[ 97.839321] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 97.839330] usb 4-2: SerialNumber: 000000000
[ 97.842096] hub 4-2:1.0: USB hub found
[ 97.842359] hub 4-2:1.0: 4 ports detected
[ 98.189655] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 98.200786] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 98.494544] usb 4-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 98.540696] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 98.540716] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 98.540725] usb 4-2.1: Product: USB3.0 Hub
[ 98.540732] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 98.540739] usb 4-2.1: SerialNumber: 000000000
[ 99.566522] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 99.566565] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 99.566787] hub 4-2.1:1.0: USB hub found
[ 99.587655] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 99.594669] usb 4-2.1: Failed to suspend device, error -19
[ 100.466346] usb 4-2: USB disconnect, device number 2
[ 100.466361] usb 4-2.1: USB disconnect, device number 3
[ 100.703928] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 100.706751] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 100.714528] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd
[ 100.759037] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 100.759045] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 100.759049] usb 4-2: Product: USB3.0 Hub
[ 100.759052] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 100.759055] usb 4-2: SerialNumber: 000000000
[ 100.761529] hub 4-2:1.0: USB hub found
[ 100.761720] hub 4-2:1.0: 4 ports detected
[ 101.096860] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 101.099958] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 101.406863] usb 4-2.1: new SuperSpeed USB device number 5 using xhci_hcd
[ 101.451888] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 101.451908] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 101.451917] usb 4-2.1: Product: USB3.0 Hub
[ 101.451924] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 101.451931] usb 4-2.1: SerialNumber: 000000000
[ 102.478727] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 102.478848] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 102.479110] hub 4-2.1:1.0: USB hub found
[ 102.500395] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 102.507895] usb 4-2.1: Failed to suspend device, error -19
[ 103.378595] usb 4-2: USB disconnect, device number 4
[ 103.378612] usb 4-2.1: USB disconnect, device number 5
[ 103.599174] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 103.602027] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 103.630759] usb 4-2: new SuperSpeed USB device number 6 using xhci_hcd
[ 103.679316] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 103.679335] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 103.679344] usb 4-2: Product: USB3.0 Hub
[ 103.679350] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 103.679357] usb 4-2: SerialNumber: 000000000
[ 103.682185] hub 4-2:1.0: USB hub found
[ 103.682295] hub 4-2:1.0: 4 ports detected
[ 104.046165] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 104.050211] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 104.318917] usb 4-2.1: new SuperSpeed USB device number 7 using xhci_hcd
[ 104.365422] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 104.365442] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 104.365451] usb 4-2.1: Product: USB3.0 Hub
[ 104.365458] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 104.365465] usb 4-2.1: SerialNumber: 000000000
[ 105.390544] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 105.390670] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 105.391027] hub 4-2.1:1.0: USB hub found
[ 105.412398] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 105.419895] usb 4-2.1: Failed to suspend device, error -19
[ 108.486713] usb 4-2: USB disconnect, device number 6
[ 108.486730] usb 4-2.1: USB disconnect, device number 7
[ 108.715563] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 108.718418] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 142.070873] usb 4-2: new SuperSpeed USB device number 8 using xhci_hcd
[ 142.116365] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 142.116385] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 142.116394] usb 4-2: Product: USB3.0 Hub
[ 142.116401] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 142.116407] usb 4-2: SerialNumber: 000000000
[ 142.119706] hub 4-2:1.0: USB hub found
[ 142.119935] hub 4-2:1.0: 4 ports detected
[ 142.439009] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 142.439203] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 142.442375] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 142.782754] usb 4-2.1: new SuperSpeed USB device number 9 using xhci_hcd
[ 142.827867] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 142.827887] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 142.827896] usb 4-2.1: Product: USB3.0 Hub
[ 142.827903] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 142.827910] usb 4-2.1: SerialNumber: 000000000
[ 143.850611] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 143.850728] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 143.851013] hub 4-2.1:1.0: USB hub found
[ 143.872194] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 143.879609] usb 4-2.1: Failed to suspend device, error -19
[ 144.954511] usb 4-2: USB disconnect, device number 8
[ 144.954528] usb 4-2.1: USB disconnect, device number 9
[ 145.179024] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 145.181807] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 145.206655] usb 4-2: new SuperSpeed USB device number 10 using xhci_hcd
[ 145.255575] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 145.255591] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 145.255598] usb 4-2: Product: USB3.0 Hub
[ 145.255603] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 145.255608] usb 4-2: SerialNumber: 000000000
[ 145.258144] hub 4-2:1.0: USB hub found
[ 145.258350] hub 4-2:1.0: 4 ports detected
[ 145.658931] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 145.661938] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 145.914774] usb 4-2.1: new SuperSpeed USB device number 11 using xhci_hcd
[ 145.960552] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 145.960573] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 145.960582] usb 4-2.1: Product: USB3.0 Hub
[ 145.960589] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 145.960595] usb 4-2.1: SerialNumber: 000000000
[ 146.986494] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 146.986537] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 146.986775] hub 4-2.1:1.0: USB hub found
[ 147.008136] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 147.015555] usb 4-2.1: Failed to suspend device, error -19
[ 150.074230] usb 4-2: USB disconnect, device number 10
[ 150.074247] usb 4-2.1: USB disconnect, device number 11
[ 150.340118] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 150.342881] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 151.902651] usb 4-2: new SuperSpeed USB device number 12 using xhci_hcd
[ 151.948215] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 151.948238] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 151.948248] usb 4-2: Product: USB3.0 Hub
[ 151.948256] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 151.948263] usb 4-2: SerialNumber: 000000000
[ 151.954817] hub 4-2:1.0: USB hub found
[ 151.954955] hub 4-2:1.0: 4 ports detected
[ 152.306536] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 152.309417] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 152.602590] usb 4-2.1: new SuperSpeed USB device number 13 using xhci_hcd
[ 152.649158] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 152.649178] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 152.649188] usb 4-2.1: Product: USB3.0 Hub
[ 152.649195] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 152.649201] usb 4-2.1: SerialNumber: 000000000
[ 153.674415] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 153.674541] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 153.674796] hub 4-2.1:1.0: USB hub found
[ 153.695924] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 153.702965] usb 4-2.1: Failed to suspend device, error -19
[ 156.762112] usb 4-2: USB disconnect, device number 12
[ 156.762128] usb 4-2.1: USB disconnect, device number 13
[ 157.038768] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 157.041679] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 163.202227] usb 4-2: new SuperSpeed USB device number 14 using xhci_hcd
[ 163.247075] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 163.247094] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 163.247103] usb 4-2: Product: USB3.0 Hub
[ 163.247110] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 163.247117] usb 4-2: SerialNumber: 000000000
[ 163.249874] hub 4-2:1.0: USB hub found
[ 163.250171] hub 4-2:1.0: 4 ports detected
[ 163.589186] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 163.589381] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 163.592597] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 163.898348] usb 4-2.1: new SuperSpeed USB device number 15 using xhci_hcd
[ 163.944040] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 163.944061] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 163.944070] usb 4-2.1: Product: USB3.0 Hub
[ 163.944077] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 163.944083] usb 4-2.1: SerialNumber: 000000000
[ 164.970256] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 164.970367] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 164.970671] hub 4-2.1:1.0: USB hub found
[ 164.992115] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 164.999571] usb 4-2.1: Failed to suspend device, error -19
[ 167.502127] usb 4-2: USB disconnect, device number 14
[ 167.502145] usb 4-2.1: USB disconnect, device number 15
[ 167.756772] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 167.759966] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 167.761974] usb 4-2: new SuperSpeed USB device number 16 using xhci_hcd
[ 167.807169] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 167.807188] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 167.807197] usb 4-2: Product: USB3.0 Hub
[ 167.807204] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 167.807210] usb 4-2: SerialNumber: 000000000
[ 167.809947] hub 4-2:1.0: USB hub found
[ 167.810076] hub 4-2:1.0: 4 ports detected
[ 168.155672] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 168.158755] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 168.442210] usb 4-2.1: new SuperSpeed USB device number 17 using xhci_hcd
[ 168.486870] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 168.486887] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 168.486896] usb 4-2.1: Product: USB3.0 Hub
[ 168.486903] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 168.486909] usb 4-2.1: SerialNumber: 000000000
[ 169.513968] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 169.514072] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 169.514350] hub 4-2.1:1.0: USB hub found
[ 169.535854] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 169.542869] usb 4-2.1: Failed to suspend device, error -19
[ 170.410121] usb 4-2: USB disconnect, device number 16
[ 170.410138] usb 4-2.1: USB disconnect, device number 17
[ 170.646267] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 170.649616] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 170.661971] usb 4-2: new SuperSpeed USB device number 18 using xhci_hcd
[ 170.710592] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 170.710604] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 170.710611] usb 4-2: Product: USB3.0 Hub
[ 170.710616] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 170.710620] usb 4-2: SerialNumber: 000000000
[ 170.713341] hub 4-2:1.0: USB hub found
[ 170.713627] hub 4-2:1.0: 4 ports detected
[ 171.124957] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 171.127998] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 171.354111] usb 4-2.1: new SuperSpeed USB device number 19 using xhci_hcd
[ 171.401554] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 171.401582] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 171.401591] usb 4-2.1: Product: USB3.0 Hub
[ 171.401606] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 171.401613] usb 4-2.1: SerialNumber: 000000000
[ 172.426024] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 172.426071] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 172.426345] hub 4-2.1:1.0: USB hub found
[ 172.447522] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 172.455023] usb 4-2.1: Failed to suspend device, error -19
[ 175.522793] usb 4-2: USB disconnect, device number 18
[ 175.522811] usb 4-2.1: USB disconnect, device number 19
[ 175.790511] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 175.794259] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 184.426233] usb 4-2: new SuperSpeed USB device number 20 using xhci_hcd
[ 184.470966] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 184.470986] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 184.470995] usb 4-2: Product: USB3.0 Hub
[ 184.471002] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 184.471008] usb 4-2: SerialNumber: 000000000
[ 184.474189] hub 4-2:1.0: USB hub found
[ 184.474380] hub 4-2:1.0: 4 ports detected
[ 184.810424] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 184.813659] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 185.114103] usb 4-2.1: new SuperSpeed USB device number 21 using xhci_hcd
[ 185.158937] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 185.158977] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 185.158990] usb 4-2.1: Product: USB3.0 Hub
[ 185.159009] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 185.159029] usb 4-2.1: SerialNumber: 000000000
[ 185.449876] usb 4-2: USB disconnect, device number 20
[ 186.186165] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 186.186209] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 186.186442] hub 4-2.1:1.0: USB hub found
[ 186.186456] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 186.186704] usb 4-2.1: USB disconnect, device number 21
[ 186.423802] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 186.426710] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 186.438260] usb 4-2: new SuperSpeed USB device number 22 using xhci_hcd
[ 186.487047] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 186.487067] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 186.487076] usb 4-2: Product: USB3.0 Hub
[ 186.487083] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 186.487090] usb 4-2: SerialNumber: 000000000
[ 186.490063] hub 4-2:1.0: USB hub found
[ 186.490224] hub 4-2:1.0: 4 ports detected
[ 186.846855] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 186.849644] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 187.130337] usb 4-2.1: new SuperSpeed USB device number 23 using xhci_hcd
[ 187.175372] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 187.175391] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 187.175400] usb 4-2.1: Product: USB3.0 Hub
[ 187.175407] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 187.175414] usb 4-2.1: SerialNumber: 000000000
[ 188.201990] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 188.202049] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 188.202371] hub 4-2.1:1.0: USB hub found
[ 188.223310] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 188.230755] usb 4-2.1: Failed to suspend device, error -19
[ 191.298106] usb 4-2: USB disconnect, device number 22
[ 191.298122] usb 4-2.1: USB disconnect, device number 23
[ 191.554112] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 191.554802] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 191.557666] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 192.309997] usb 4-2: new SuperSpeed USB device number 24 using xhci_hcd
[ 192.354549] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 192.354578] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 192.354595] usb 4-2: Product: USB3.0 Hub
[ 192.354602] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 192.354609] usb 4-2: SerialNumber: 000000000
[ 192.357606] hub 4-2:1.0: USB hub found
[ 192.357774] hub 4-2:1.0: 4 ports detected
[ 192.690832] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 192.693767] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 193.018523] usb 4-2.1: new SuperSpeed USB device number 25 using xhci_hcd
[ 193.064244] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 193.064265] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 193.064274] usb 4-2.1: Product: USB3.0 Hub
[ 193.064281] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 193.064287] usb 4-2.1: SerialNumber: 000000000
[ 194.090180] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 194.090225] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 194.090457] hub 4-2.1:1.0: USB hub found
[ 194.111393] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 194.118920] usb 4-2.1: Failed to suspend device, error -19
[ 195.198140] usb 4-2: USB disconnect, device number 24
[ 195.198157] usb 4-2.1: USB disconnect, device number 25
[ 195.461501] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 195.462086] usb 4-2: new SuperSpeed USB device number 26 using xhci_hcd
[ 195.464673] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 195.510665] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 195.510683] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 195.510691] usb 4-2: Product: USB3.0 Hub
[ 195.510698] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 195.510704] usb 4-2: SerialNumber: 000000000
[ 195.513981] hub 4-2:1.0: USB hub found
[ 195.514190] hub 4-2:1.0: 4 ports detected
[ 195.861321] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 195.864652] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 196.154234] usb 4-2.1: new SuperSpeed USB device number 27 using xhci_hcd
[ 196.199927] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 196.199947] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 196.199956] usb 4-2.1: Product: USB3.0 Hub
[ 196.199963] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 196.199969] usb 4-2.1: SerialNumber: 000000000
[ 197.225924] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 197.225963] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 197.226182] hub 4-2.1:1.0: USB hub found
[ 197.247186] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 197.254191] usb 4-2.1: Failed to suspend device, error -19
[ 198.121886] usb 4-2: USB disconnect, device number 26
[ 198.121902] usb 4-2.1: USB disconnect, device number 27
[ 198.367117] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 198.369936] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 198.370131] usb 4-2: new SuperSpeed USB device number 28 using xhci_hcd
[ 198.414990] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 198.415001] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 198.415005] usb 4-2: Product: USB3.0 Hub
[ 198.415009] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 198.415012] usb 4-2: SerialNumber: 000000000
[ 198.416926] hub 4-2:1.0: USB hub found
[ 198.417142] hub 4-2:1.0: 4 ports detected
[ 198.771122] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 198.774049] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 199.066213] usb 4-2.1: new SuperSpeed USB device number 29 using xhci_hcd
[ 199.111500] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 199.111520] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 199.111529] usb 4-2.1: Product: USB3.0 Hub
[ 199.111536] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 199.111543] usb 4-2.1: SerialNumber: 000000000
[ 200.138002] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 200.138119] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 200.138446] hub 4-2.1:1.0: USB hub found
[ 200.159265] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 200.166726] usb 4-2.1: Failed to suspend device, error -19
[ 203.086146] usb 4-2: USB disconnect, device number 28
[ 203.086163] usb 4-2.1: USB disconnect, device number 29
[ 203.334612] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 203.337550] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 203.346860] usb 4-2: new SuperSpeed USB device number 30 using xhci_hcd
[ 203.394512] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 203.394533] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 203.394542] usb 4-2: Product: USB3.0 Hub
[ 203.394549] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 203.394555] usb 4-2: SerialNumber: 000000000
[ 203.397294] hub 4-2:1.0: USB hub found
[ 203.397569] hub 4-2:1.0: 4 ports detected
[ 203.749579] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 203.752627] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 204.058183] usb 4-2.1: new SuperSpeed USB device number 31 using xhci_hcd
[ 204.103643] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 204.103661] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 204.103670] usb 4-2.1: Product: USB3.0 Hub
[ 204.103677] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 204.103684] usb 4-2.1: SerialNumber: 000000000
[ 205.133934] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 205.133985] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 205.134200] hub 4-2.1:1.0: USB hub found
[ 205.155152] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 205.162152] usb 4-2.1: Failed to suspend device, error -19
[ 206.025951] usb 4-2: USB disconnect, device number 30
[ 206.025968] usb 4-2.1: USB disconnect, device number 31
[ 206.265184] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 206.268028] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 206.273934] usb 4-2: new SuperSpeed USB device number 32 using xhci_hcd
[ 206.318513] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 206.318530] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 206.318539] usb 4-2: Product: USB3.0 Hub
[ 206.318547] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 206.318553] usb 4-2: SerialNumber: 000000000
[ 206.321235] hub 4-2:1.0: USB hub found
[ 206.321445] hub 4-2:1.0: 4 ports detected
[ 206.672295] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 206.675174] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 206.969991] usb 4-2.1: new SuperSpeed USB device number 33 using xhci_hcd
[ 207.014975] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 207.014991] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 207.015000] usb 4-2.1: Product: USB3.0 Hub
[ 207.015007] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 207.015013] usb 4-2.1: SerialNumber: 000000000
[ 208.041948] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 208.041979] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 208.042202] hub 4-2.1:1.0: USB hub found
[ 208.063129] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 208.070142] usb 4-2.1: Failed to suspend device, error -19
[ 208.937896] usb 4-2: USB disconnect, device number 32
[ 208.937912] usb 4-2.1: USB disconnect, device number 33
[ 209.156478] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 209.159721] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 209.186007] usb 4-2: new SuperSpeed USB device number 34 using xhci_hcd
[ 209.230569] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 209.230596] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 209.230614] usb 4-2: Product: USB3.0 Hub
[ 209.230629] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 209.230636] usb 4-2: SerialNumber: 000000000
[ 209.233801] hub 4-2:1.0: USB hub found
[ 209.233923] hub 4-2:1.0: 4 ports detected
[ 209.582666] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 209.585412] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 209.881977] usb 4-2.1: new SuperSpeed USB device number 35 using xhci_hcd
[ 209.926874] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 209.926888] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 209.926905] usb 4-2.1: Product: USB3.0 Hub
[ 209.926911] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 209.926925] usb 4-2.1: SerialNumber: 000000000
[ 210.421904] usb 4-2: USB disconnect, device number 34
[ 210.953957] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 210.953993] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 210.954205] hub 4-2.1:1.0: USB hub found
[ 210.954219] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 210.954533] usb 4-2.1: USB disconnect, device number 35
[ 211.206014] usb 4-2: new SuperSpeed USB device number 36 using xhci_hcd
[ 211.206619] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 211.209510] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 211.250505] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 211.250512] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 211.250515] usb 4-2: Product: USB3.0 Hub
[ 211.250518] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 211.250521] usb 4-2: SerialNumber: 000000000
[ 211.252790] hub 4-2:1.0: USB hub found
[ 211.252918] hub 4-2:1.0: 4 ports detected
[ 211.597453] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 211.600446] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 211.898507] usb 4-2.1: new SuperSpeed USB device number 37 using xhci_hcd
[ 211.944312] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 211.944332] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 211.944341] usb 4-2.1: Product: USB3.0 Hub
[ 211.944348] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 211.944354] usb 4-2.1: SerialNumber: 000000000
[ 212.970225] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 212.970356] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 212.970689] hub 4-2.1:1.0: USB hub found
[ 212.991669] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 212.998868] usb 4-2.1: Failed to suspend device, error -19
[ 216.066277] usb 4-2: USB disconnect, device number 36
[ 216.066294] usb 4-2.1: USB disconnect, device number 37
[ 216.332730] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 216.335850] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 223.706425] usb 4-2: new SuperSpeed USB device number 38 using xhci_hcd
[ 223.751686] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 223.751714] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 223.751726] usb 4-2: Product: USB3.0 Hub
[ 223.751736] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 223.751742] usb 4-2: SerialNumber: 000000000
[ 223.754562] hub 4-2:1.0: USB hub found
[ 223.757899] hub 4-2:1.0: 4 ports detected
[ 224.105839] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 224.108755] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 224.410306] usb 4-2.1: new SuperSpeed USB device number 39 using xhci_hcd
[ 224.456088] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 224.456108] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 224.456118] usb 4-2.1: Product: USB3.0 Hub
[ 224.456125] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 224.456131] usb 4-2.1: SerialNumber: 000000000
[ 225.482263] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 225.482341] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 225.482615] hub 4-2.1:1.0: USB hub found
[ 225.503789] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 225.511275] usb 4-2.1: Failed to suspend device, error -19
[ 226.382173] usb 4-2: USB disconnect, device number 38
[ 226.382190] usb 4-2.1: USB disconnect, device number 39
[ 226.603452] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 226.606269] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 226.642042] usb 4-2: new SuperSpeed USB device number 40 using xhci_hcd
[ 226.686469] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 226.686486] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 226.686494] usb 4-2: Product: USB3.0 Hub
[ 226.686501] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 226.686507] usb 4-2: SerialNumber: 000000000
[ 226.689227] hub 4-2:1.0: USB hub found
[ 226.689403] hub 4-2:1.0: 4 ports detected
[ 227.033201] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 227.036262] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 227.322110] usb 4-2.1: new SuperSpeed USB device number 41 using xhci_hcd
[ 227.366833] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 227.366849] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 227.366858] usb 4-2.1: Product: USB3.0 Hub
[ 227.366865] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 227.366871] usb 4-2.1: SerialNumber: 000000000
[ 228.394013] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 228.394057] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 228.394291] hub 4-2.1:1.0: USB hub found
[ 228.415100] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 228.422071] usb 4-2.1: Failed to suspend device, error -19
[ 231.482104] usb 4-2: USB disconnect, device number 40
[ 231.482121] usb 4-2.1: USB disconnect, device number 41
[ 231.739060] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 231.739459] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 231.742628] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 233.926051] usb 4-2: new SuperSpeed USB device number 42 using xhci_hcd
[ 233.974574] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 233.974601] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 233.974618] usb 4-2: Product: USB3.0 Hub
[ 233.974625] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 233.974640] usb 4-2: SerialNumber: 000000000
[ 233.977354] hub 4-2:1.0: USB hub found
[ 233.978497] hub 4-2:1.0: 4 ports detected
[ 234.352309] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 234.356303] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 234.618073] usb 4-2.1: new SuperSpeed USB device number 43 using xhci_hcd
[ 234.662968] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 234.662996] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 234.663005] usb 4-2.1: Product: USB3.0 Hub
[ 234.663012] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 234.663018] usb 4-2.1: SerialNumber: 000000000
[ 235.690213] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 235.690257] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 235.690497] hub 4-2.1:1.0: USB hub found
[ 235.711738] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 235.719291] usb 4-2.1: Failed to suspend device, error -19
[ 238.218171] usb 4-2: USB disconnect, device number 42
[ 238.218189] usb 4-2.1: USB disconnect, device number 43
[ 238.469983] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 238.473322] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 238.474010] usb 4-2: new SuperSpeed USB device number 44 using xhci_hcd
[ 238.523024] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 238.523042] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 238.523050] usb 4-2: Product: USB3.0 Hub
[ 238.523057] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 238.523064] usb 4-2: SerialNumber: 000000000
[ 238.525823] hub 4-2:1.0: USB hub found
[ 238.525953] hub 4-2:1.0: 4 ports detected
[ 238.915791] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 238.915982] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 238.919920] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 239.162546] usb 4-2.1: new SuperSpeed USB device number 45 using xhci_hcd
[ 239.207161] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 239.207181] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 239.207190] usb 4-2.1: Product: USB3.0 Hub
[ 239.207197] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 239.207204] usb 4-2.1: SerialNumber: 000000000
[ 240.234039] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 240.234149] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 240.234478] hub 4-2.1:1.0: USB hub found
[ 240.255560] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 240.263219] usb 4-2.1: Failed to suspend device, error -19
[ 242.970164] usb 4-2: USB disconnect, device number 44
[ 242.970181] usb 4-2.1: USB disconnect, device number 45
[ 243.219028] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 243.221975] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 243.226079] usb 4-2: new SuperSpeed USB device number 46 using xhci_hcd
[ 243.271057] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 243.271067] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 243.271071] usb 4-2: Product: USB3.0 Hub
[ 243.271075] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 243.271078] usb 4-2: SerialNumber: 000000000
[ 243.273413] hub 4-2:1.0: USB hub found
[ 243.273675] hub 4-2:1.0: 4 ports detected
[ 243.615161] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 243.617948] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 243.930589] usb 4-2.1: new SuperSpeed USB device number 47 using xhci_hcd
[ 243.975290] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 243.975309] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 243.975319] usb 4-2.1: Product: USB3.0 Hub
[ 243.975325] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 243.975332] usb 4-2.1: SerialNumber: 000000000
[ 244.470004] usb 4-2: USB disconnect, device number 46
[ 245.002243] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 245.003877] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 245.004214] hub 4-2.1:1.0: USB hub found
[ 245.004230] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 245.004556] usb 4-2.1: USB disconnect, device number 47
[ 245.238973] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 245.239183] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 245.242853] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 245.262326] usb 4-2: new SuperSpeed USB device number 48 using xhci_hcd
[ 245.307073] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 245.307087] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 245.307093] usb 4-2: Product: USB3.0 Hub
[ 245.307098] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 245.307103] usb 4-2: SerialNumber: 000000000
[ 245.309942] hub 4-2:1.0: USB hub found
[ 245.310184] hub 4-2:1.0: 4 ports detected
[ 245.655230] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 245.655884] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 245.659127] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 245.946226] usb 4-2.1: new SuperSpeed USB device number 49 using xhci_hcd
[ 245.992568] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 245.992589] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 245.992597] usb 4-2.1: Product: USB3.0 Hub
[ 245.992604] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 245.992610] usb 4-2.1: SerialNumber: 000000000
[ 247.018216] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 247.018342] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 247.018722] hub 4-2.1:1.0: USB hub found
[ 247.039765] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 247.047202] usb 4-2.1: Failed to suspend device, error -19
[ 247.914179] usb 4-2: USB disconnect, device number 48
[ 247.914196] usb 4-2.1: USB disconnect, device number 49
[ 248.149389] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 248.152393] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 248.166334] usb 4-2: new SuperSpeed USB device number 50 using xhci_hcd
[ 248.211157] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 248.211176] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 248.211183] usb 4-2: Product: USB3.0 Hub
[ 248.211190] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 248.211196] usb 4-2: SerialNumber: 000000000
[ 248.213716] hub 4-2:1.0: USB hub found
[ 248.213904] hub 4-2:1.0: 4 ports detected
[ 248.553762] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 248.556714] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 248.858285] usb 4-2.1: new SuperSpeed USB device number 51 using xhci_hcd
[ 248.903153] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 248.903174] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 248.903183] usb 4-2.1: Product: USB3.0 Hub
[ 248.903190] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 248.903196] usb 4-2.1: SerialNumber: 000000000
[ 249.929995] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 249.930105] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 249.930339] hub 4-2.1:1.0: USB hub found
[ 249.951460] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 249.958529] usb 4-2.1: Failed to suspend device, error -19
[ 250.013915] usb 4-2: USB disconnect, device number 50
[ 250.013929] usb 4-2.1: USB disconnect, device number 51
[ 250.245280] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 250.248263] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 250.265953] usb 4-2: new SuperSpeed USB device number 52 using xhci_hcd
[ 250.310559] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 250.310572] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 250.310578] usb 4-2: Product: USB3.0 Hub
[ 250.310583] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 250.310587] usb 4-2: SerialNumber: 000000000
[ 250.313127] hub 4-2:1.0: USB hub found
[ 250.313263] hub 4-2:1.0: 4 ports detected
[ 250.656626] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 250.659714] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 250.969999] usb 4-2.1: new SuperSpeed USB device number 53 using xhci_hcd
[ 251.014904] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 251.014930] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 251.014948] usb 4-2.1: Product: USB3.0 Hub
[ 251.014955] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 251.014970] usb 4-2.1: SerialNumber: 000000000
[ 252.041945] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 252.041980] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 252.042201] hub 4-2.1:1.0: USB hub found
[ 252.062950] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 252.069945] usb 4-2.1: Failed to suspend device, error -19
[ 252.938190] usb 4-2: USB disconnect, device number 52
[ 252.938208] usb 4-2.1: USB disconnect, device number 53
[ 253.194005] usb 4-2: new SuperSpeed USB device number 54 using xhci_hcd
[ 253.196801] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 253.196984] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 253.200721] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 253.239070] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 253.239080] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 253.239084] usb 4-2: Product: USB3.0 Hub
[ 253.239087] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 253.239090] usb 4-2: SerialNumber: 000000000
[ 253.241390] hub 4-2:1.0: USB hub found
[ 253.241482] hub 4-2:1.0: 4 ports detected
[ 253.574719] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 253.577528] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 253.882347] usb 4-2.1: new SuperSpeed USB device number 55 using xhci_hcd
[ 253.928063] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 253.928083] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 253.928092] usb 4-2.1: Product: USB3.0 Hub
[ 253.928099] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 253.928106] usb 4-2.1: SerialNumber: 000000000
[ 254.953989] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 254.954035] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 254.954403] hub 4-2.1:1.0: USB hub found
[ 254.975441] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 254.982947] usb 4-2.1: Failed to suspend device, error -19
[ 255.033930] usb 4-2: USB disconnect, device number 54
[ 255.033945] usb 4-2.1: USB disconnect, device number 55
[ 255.272905] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 255.273132] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 255.276313] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 255.281970] usb 4-2: new SuperSpeed USB device number 56 using xhci_hcd
[ 255.326577] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 255.326587] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 255.326591] usb 4-2: Product: USB3.0 Hub
[ 255.326594] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 255.326597] usb 4-2: SerialNumber: 000000000
[ 255.328649] hub 4-2:1.0: USB hub found
[ 255.328810] hub 4-2:1.0: 4 ports detected
[ 255.676369] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 255.679266] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 255.962058] usb 4-2.1: new SuperSpeed USB device number 57 using xhci_hcd
[ 256.007748] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 256.007768] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 256.007777] usb 4-2.1: Product: USB3.0 Hub
[ 256.007784] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 256.007790] usb 4-2.1: SerialNumber: 000000000
[ 256.298168] usb 4-2: USB disconnect, device number 56
[ 257.034198] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 257.034241] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 257.034473] hub 4-2.1:1.0: USB hub found
[ 257.034487] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 257.034763] usb 4-2.1: USB disconnect, device number 57
[ 257.271965] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 257.274817] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 257.294102] usb 4-2: new SuperSpeed USB device number 58 using xhci_hcd
[ 257.339284] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 257.339303] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 257.339312] usb 4-2: Product: USB3.0 Hub
[ 257.339319] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 257.339325] usb 4-2: SerialNumber: 000000000
[ 257.342131] hub 4-2:1.0: USB hub found
[ 257.342342] hub 4-2:1.0: 4 ports detected
[ 257.697185] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 257.700207] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 257.846044] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 257.982519] usb 4-2.1: new SuperSpeed USB device number 59 using xhci_hcd
[ 258.027424] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 258.027443] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 258.027452] usb 4-2.1: Product: USB3.0 Hub
[ 258.027459] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 258.027466] usb 4-2.1: SerialNumber: 000000000
[ 258.522175] usb 4-2: USB disconnect, device number 58
[ 259.049975] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 259.050302] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 259.054140] hub 4-2.1:1.0: USB hub found
[ 259.054162] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 259.055345] usb 4-2.1: USB disconnect, device number 59
[ 259.306079] usb 4-2: new SuperSpeed USB device number 60 using xhci_hcd
[ 259.306921] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 259.309718] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 259.350917] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 259.350936] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 259.350944] usb 4-2: Product: USB3.0 Hub
[ 259.350951] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 259.350958] usb 4-2: SerialNumber: 000000000
[ 259.353712] hub 4-2:1.0: USB hub found
[ 259.353837] hub 4-2:1.0: 4 ports detected
[ 259.699641] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 259.699993] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 259.703062] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 259.994672] usb 4-2.1: new SuperSpeed USB device number 61 using xhci_hcd
[ 260.040450] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 260.040473] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 260.040483] usb 4-2.1: Product: USB3.0 Hub
[ 260.040491] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 260.040498] usb 4-2.1: SerialNumber: 000000000
[ 261.066250] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 261.066374] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 261.066729] hub 4-2.1:1.0: USB hub found
[ 261.087663] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 261.095135] usb 4-2.1: Failed to suspend device, error -19
[ 264.154166] usb 4-2: USB disconnect, device number 60
[ 264.154183] usb 4-2.1: USB disconnect, device number 61
[ 264.426383] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 264.429106] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 265.778309] usb 4-2: new SuperSpeed USB device number 62 using xhci_hcd
[ 265.824083] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 265.824106] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 265.824116] usb 4-2: Product: USB3.0 Hub
[ 265.824124] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 265.824131] usb 4-2: SerialNumber: 000000000
[ 265.827175] hub 4-2:1.0: USB hub found
[ 265.827449] hub 4-2:1.0: 4 ports detected
[ 266.160574] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 266.163460] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 266.458617] usb 4-2.1: new SuperSpeed USB device number 63 using xhci_hcd
[ 266.504080] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 266.504100] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 266.504109] usb 4-2.1: Product: USB3.0 Hub
[ 266.504116] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 266.504123] usb 4-2.1: SerialNumber: 000000000
[ 266.998048] usb 4-2: USB disconnect, device number 62
[ 267.530257] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 267.530394] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 267.530822] hub 4-2.1:1.0: USB hub found
[ 267.530841] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 267.531343] usb 4-2.1: USB disconnect, device number 63
[ 267.782118] usb 4-2: new SuperSpeed USB device number 64 using xhci_hcd
[ 267.826647] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 267.826665] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 267.826674] usb 4-2: Product: USB3.0 Hub
[ 267.826681] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 267.826688] usb 4-2: SerialNumber: 000000000
[ 267.829412] hub 4-2:1.0: USB hub found
[ 267.829553] hub 4-2:1.0: 4 ports detected
[ 267.879648] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 267.882504] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 268.172441] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 268.175361] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 268.474433] usb 4-2.1: new SuperSpeed USB device number 65 using xhci_hcd
[ 268.521478] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 268.521502] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 268.521512] usb 4-2.1: Product: USB3.0 Hub
[ 268.521520] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 268.521528] usb 4-2.1: SerialNumber: 000000000
[ 269.022166] usb 4-2: USB disconnect, device number 64
[ 269.546131] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 269.546267] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 269.546705] hub 4-2.1:1.0: USB hub found
[ 269.546723] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 269.547043] usb 4-2.1: USB disconnect, device number 65
[ 269.785522] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 269.788468] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 269.798161] usb 4-2: new SuperSpeed USB device number 66 using xhci_hcd
[ 269.843311] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 269.843322] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 269.843327] usb 4-2: Product: USB3.0 Hub
[ 269.843332] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 269.843335] usb 4-2: SerialNumber: 000000000
[ 269.845937] hub 4-2:1.0: USB hub found
[ 269.846190] hub 4-2:1.0: 4 ports detected
[ 270.184836] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 270.185157] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 270.188292] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 270.490223] usb 4-2.1: new SuperSpeed USB device number 67 using xhci_hcd
[ 270.544066] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 270.544083] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 270.544091] usb 4-2.1: Product: USB3.0 Hub
[ 270.544098] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 270.544104] usb 4-2.1: SerialNumber: 000000000
[ 271.561988] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 271.562062] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 271.562276] hub 4-2.1:1.0: USB hub found
[ 271.583357] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 271.590390] usb 4-2.1: Failed to suspend device, error -19
[ 272.477927] usb 4-2: USB disconnect, device number 66
[ 272.477943] usb 4-2.1: USB disconnect, device number 67
[ 272.685442] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 272.688457] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 272.726119] usb 4-2: new SuperSpeed USB device number 68 using xhci_hcd
[ 272.770590] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 272.770604] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 272.770612] usb 4-2: Product: USB3.0 Hub
[ 272.770618] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 272.770624] usb 4-2: SerialNumber: 000000000
[ 272.773479] hub 4-2:1.0: USB hub found
[ 272.773614] hub 4-2:1.0: 4 ports detected
[ 273.116599] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 273.116796] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 273.120260] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 273.434105] usb 4-2.1: new SuperSpeed USB device number 69 using xhci_hcd
[ 273.478951] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 273.478968] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 273.478977] usb 4-2.1: Product: USB3.0 Hub
[ 273.478984] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 273.478990] usb 4-2.1: SerialNumber: 000000000
[ 274.506048] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 274.506099] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 274.506313] hub 4-2.1:1.0: USB hub found
[ 274.527394] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 274.534402] usb 4-2.1: Failed to suspend device, error -19
[ 277.037949] usb 4-2: USB disconnect, device number 68
[ 277.037966] usb 4-2.1: USB disconnect, device number 69
[ 277.278597] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 277.281428] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 277.290156] usb 4-2: new SuperSpeed USB device number 70 using xhci_hcd
[ 277.334724] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 277.334735] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 277.334740] usb 4-2: Product: USB3.0 Hub
[ 277.334744] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 277.334748] usb 4-2: SerialNumber: 000000000
[ 277.337111] hub 4-2:1.0: USB hub found
[ 277.337337] hub 4-2:1.0: 4 ports detected
[ 277.683670] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 277.686870] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 277.978647] usb 4-2.1: new SuperSpeed USB device number 71 using xhci_hcd
[ 278.025086] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 278.025106] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 278.025115] usb 4-2.1: Product: USB3.0 Hub
[ 278.025122] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 278.025129] usb 4-2.1: SerialNumber: 000000000
[ 279.050279] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 279.050441] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 279.050852] hub 4-2.1:1.0: USB hub found
[ 279.072112] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 279.079602] usb 4-2.1: Failed to suspend device, error -19
[ 280.769993] usb 4-2: USB disconnect, device number 70
[ 280.770010] usb 4-2.1: USB disconnect, device number 71
[ 280.981432] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 280.984389] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 281.030211] usb 4-2: new SuperSpeed USB device number 72 using xhci_hcd
[ 281.079178] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 281.079197] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 281.079206] usb 4-2: Product: USB3.0 Hub
[ 281.079213] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 281.079219] usb 4-2: SerialNumber: 000000000
[ 281.082034] hub 4-2:1.0: USB hub found
[ 281.082291] hub 4-2:1.0: 4 ports detected
[ 281.415820] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 281.418608] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 281.722100] usb 4-2.1: new SuperSpeed USB device number 73 using xhci_hcd
[ 281.766987] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 281.767016] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 281.767034] usb 4-2.1: Product: USB3.0 Hub
[ 281.767041] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 281.767056] usb 4-2.1: SerialNumber: 000000000
[ 282.794051] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 282.794094] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 282.794326] hub 4-2.1:1.0: USB hub found
[ 282.815551] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 282.822928] usb 4-2.1: Failed to suspend device, error -19
[ 283.689947] usb 4-2: USB disconnect, device number 72
[ 283.689964] usb 4-2.1: USB disconnect, device number 73
[ 283.924798] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 283.927704] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 283.942591] usb 4-2: new SuperSpeed USB device number 74 using xhci_hcd
[ 283.987476] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 283.987492] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 283.987498] usb 4-2: Product: USB3.0 Hub
[ 283.987504] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 283.987509] usb 4-2: SerialNumber: 000000000
[ 283.990404] hub 4-2:1.0: USB hub found
[ 283.990541] hub 4-2:1.0: 4 ports detected
[ 284.330077] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 284.332960] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 284.634559] usb 4-2.1: new SuperSpeed USB device number 75 using xhci_hcd
[ 284.680883] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 284.680903] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 284.680912] usb 4-2.1: Product: USB3.0 Hub
[ 284.680919] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 284.680925] usb 4-2.1: SerialNumber: 000000000
[ 284.695170] hub 4-2.1:1.0: USB hub found
[ 284.695397] hub 4-2.1:1.0: 4 ports detected
[ 285.030855] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 285.033757] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 425.482940] input: hello (AVRCP) as /devices/virtual/input/input34
[ 538.041221] input: hello (AVRCP) as /devices/virtual/input/input35
[ 568.305577] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 571.307458] r8152 3-2.1.3:1.0 enx00e04ceb9e75: Promiscuous mode enabled
[ 575.128099] mpris-proxy[2033]: segfault at 8 ip 0000558cdc951aea sp 00007ffc7ab43ae0 error 4 in mpris-proxy[8aea,558cdc94e000+c000] likely on CPU 3 (core 3, socket 0)
[ 575.128144] Code: c9 ff ff 48 8b 2d 7e e6 00 00 48 85 ed 75 12 eb c6 0f 1f 80 00 00 00 00 48 8b 6d 08 48 85 ed 74 b6 4c 8b 65 00 49 8b 44 24 38 <48> 8b 70 08 48 85 f6 74 04 48 8b 76 10 48 89 df e8 b1 cb ff ff 85
[ 847.594201] usb 3-2: USB disconnect, device number 2
[ 847.594229] usb 3-2.1: USB disconnect, device number 3
[ 847.594238] r8152-cfgselector 3-2.1.3: USB disconnect, device number 5
[ 847.598184] r8152 3-2.1.3:1.0 enx00e04ceb9e75 (unregistering): left promiscuous mode
[ 847.666014] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[ 847.666058] xhci_hcd 0000:39:00.0: HC died; cleaning up
[ 847.666436] usb 4-2: USB disconnect, device number 74
[ 847.666447] usb 4-2.1: USB disconnect, device number 75
[ 847.688466] xhci_hcd 0000:39:00.0: remove, state 1
[ 847.688484] usb usb4: USB disconnect, device number 1
[ 847.691061] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[ 847.691088] xhci_hcd 0000:39:00.0: remove, state 1
[ 847.691098] usb usb3: USB disconnect, device number 1
[ 847.726013] usb 3-2.4: USB disconnect, device number 4
[ 847.976945] usb 3-2.5: USB disconnect, device number 6
[ 847.978054] xhci_hcd 0000:39:00.0: Host halt failed, -19
[ 847.978067] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[ 847.978656] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[ 847.979042] pcieport 0000:04:00.0: Unable to change power state from D3hot to D0, device inaccessible
[ 847.981319] pci_bus 0000:05: busn_res: [bus 05] is released
[ 847.981720] pci_bus 0000:06: busn_res: [bus 06-38] is released
[ 847.982307] pci_bus 0000:39: busn_res: [bus 39] is released
[ 847.983029] pci_bus 0000:3a: busn_res: [bus 3a-6d] is released
[ 847.983495] pci_bus 0000:04: busn_res: [bus 04-6d] is released
[ 1577.049678] input: hello (AVRCP) as /devices/virtual/input/input36
[ 1580.384917] PM: suspend entry (s2idle)
[ 1580.389282] Filesystems sync: 0.004 seconds
[ 1580.403172] Freezing user space processes
[ 1580.404688] Freezing user space processes completed (elapsed 0.001 seconds)
[ 1580.404694] OOM killer disabled.
[ 1580.404695] Freezing remaining freezable tasks
[ 1580.405857] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 1580.405861] printk: Suspending console(s) (use no_console_suspend to debug)
[ 1580.460815] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 1580.652930] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 1581.404275] intel_pch_thermal 0000:00:14.2: CPU-PCH is cool [32C]
[ 1581.409282] ACPI: EC: interrupt blocked
[ 2299.966093] ACPI: EC: interrupt unblocked
[ 2299.978627] pcieport 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled
[ 2299.978678] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 2300.072155] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 2300.073096] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 2300.710577] OOM killer enabled.
[ 2300.710581] Restarting tasks: Starting
[ 2300.711344] Restarting tasks: Done
[ 2300.711395] random: crng reseeded on system resumption
[ 2300.712154] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 2300.765135] PM: suspend exit
[ 2307.331152] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Upstream Port
[ 2307.331233] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 2307.331250] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 2307.331268] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 2307.331293] pci 0000:03:00.0: enabling Extended Tags
[ 2307.331479] pci 0000:03:00.0: supports D1 D2
[ 2307.331484] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2307.333525] pci 0000:03:00.0: Adding to iommu group 18
[ 2307.338043] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 2307.338084] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 2307.338099] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 2307.338131] pci 0000:04:00.0: enabling Extended Tags
[ 2307.338249] pci 0000:04:00.0: supports D1 D2
[ 2307.338252] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2307.339778] pci 0000:04:00.0: Adding to iommu group 19
[ 2307.339925] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 2307.339964] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 2307.339978] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 2307.339993] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 2307.340013] pci 0000:04:01.0: enabling Extended Tags
[ 2307.340131] pci 0000:04:01.0: supports D1 D2
[ 2307.340134] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2307.340423] pci 0000:04:01.0: Adding to iommu group 20
[ 2307.340560] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 2307.340599] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 2307.340612] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 2307.340644] pci 0000:04:02.0: enabling Extended Tags
[ 2307.340760] pci 0000:04:02.0: supports D1 D2
[ 2307.340763] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2307.340994] pci 0000:04:02.0: Adding to iommu group 21
[ 2307.341154] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 2307.341193] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 2307.341206] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 2307.341221] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 2307.341241] pci 0000:04:04.0: enabling Extended Tags
[ 2307.341360] pci 0000:04:04.0: supports D1 D2
[ 2307.341362] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2307.341564] pci 0000:04:04.0: Adding to iommu group 22
[ 2307.341726] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 2307.341816] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 2307.341900] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 2307.343483] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint
[ 2307.343569] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff]
[ 2307.343599] pci 0000:39:00.0: enabling Extended Tags
[ 2307.344196] pci 0000:39:00.0: supports D1 D2
[ 2307.344202] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2307.348322] pci 0000:39:00.0: Adding to iommu group 21
[ 2307.348491] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 2307.348654] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 2307.348724] pci_bus 0000:04: Allocating resources
[ 2307.348753] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2307.348761] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2307.348768] pci 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2307.348777] pci 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2307.348785] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2307.348792] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2307.348801] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2307.348810] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2307.348815] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2307.348820] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2307.348824] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2307.348836] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2307.348840] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2307.348845] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.348849] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2307.348854] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.348858] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2307.348863] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.348867] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2307.348874] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.348878] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2307.348885] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2307.348889] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2307.348894] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.348898] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2307.348904] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.348909] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2307.348915] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 2307.348927] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 2307.348941] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 2307.348950] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 2307.348958] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 2307.348970] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 2307.348979] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 2307.348992] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 2307.349002] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 2307.349010] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 2307.349021] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 2307.349030] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 2307.349038] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 2307.362206] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 2307.362220] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 2307.363465] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 2307.363932] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 2307.363939] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 2307.363944] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 2307.364017] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16
[ 2307.364023] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2307.364027] usb usb3: Product: xHCI Host Controller
[ 2307.364030] usb usb3: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 2307.364033] usb usb3: SerialNumber: 0000:39:00.0
[ 2307.485867] hub 3-0:1.0: USB hub found
[ 2307.485886] hub 3-0:1.0: 2 ports detected
[ 2307.491122] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16
[ 2307.491130] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2307.491135] usb usb4: Product: xHCI Host Controller
[ 2307.491138] usb usb4: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 2307.491141] usb usb4: SerialNumber: 0000:39:00.0
[ 2307.491473] hub 4-0:1.0: USB hub found
[ 2307.491490] hub 4-0:1.0: 2 ports detected
[ 2307.529740] pci_bus 0000:04: Allocating resources
[ 2307.529771] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2307.529779] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2307.529784] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2307.529791] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2307.529795] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2307.529800] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2307.529805] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2307.529811] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2307.529815] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2307.529819] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2307.529822] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2307.529830] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2307.529833] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2307.529837] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.529840] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2307.529843] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.529846] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2307.529849] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.529852] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2307.529856] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.529859] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2307.529863] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2307.529866] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2307.529869] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.529872] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2307.529875] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2307.529878] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2307.739025] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 2307.877246] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 2307.877262] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2307.877270] usb 3-1: Product: USB2.0 Hub
[ 2307.877277] usb 3-1: Manufacturer: VIA Labs, Inc.
[ 2307.877282] usb 3-1: SerialNumber: 000000000
[ 2307.878991] hub 3-1:1.0: USB hub found
[ 2307.879200] hub 3-1:1.0: 5 ports detected
[ 2308.002412] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 2308.044955] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2308.044979] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2308.044992] usb 4-1: Product: USB3.0 Hub
[ 2308.045002] usb 4-1: Manufacturer: VIA Labs, Inc.
[ 2308.045012] usb 4-1: SerialNumber: 000000000
[ 2308.051149] hub 4-1:1.0: USB hub found
[ 2308.051380] hub 4-1:1.0: 4 ports detected
[ 2308.602998] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[ 2308.741677] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 2308.741696] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2308.741705] usb 3-1.1: Product: USB2.0 Hub
[ 2308.741712] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[ 2308.741719] usb 3-1.1: SerialNumber: 000000000
[ 2308.747458] hub 3-1.1:1.0: USB hub found
[ 2308.747824] hub 3-1.1:1.0: 4 ports detected
[ 2308.841857] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 2308.911082] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2308.911109] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2308.911122] usb 4-1.1: Product: USB3.0 Hub
[ 2308.911133] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[ 2308.911142] usb 4-1.1: SerialNumber: 000000000
[ 2308.915132] hub 4-1.1:1.0: USB hub found
[ 2308.915486] hub 4-1.1:1.0: 4 ports detected
[ 2309.095043] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[ 2309.118075] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 2309.118081] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2309.118084] usb 4-1.4: Product: Mass Storage Device
[ 2309.118087] usb 4-1.4: Manufacturer: Generic
[ 2309.118089] usb 4-1.4: SerialNumber: 058F84688461
[ 2309.120299] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[ 2309.120775] scsi host0: usb-storage 4-1.4:1.0
[ 2309.418999] usb 3-1.1.3: new high-speed USB device number 4 using xhci_hcd
[ 2310.159326] usb 4-1.1.3: new SuperSpeed USB device number 5 using xhci_hcd
[ 2310.176743] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 2310.176762] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 2310.176772] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[ 2310.176779] usb 4-1.1.3: Manufacturer: Realtek
[ 2310.176785] usb 4-1.1.3: SerialNumber: 000001
[ 2310.695702] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd
[ 2310.732123] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 2310.733044] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2310.733822] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 2310.755303] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2310.787601] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd
[ 2310.865090] r8152 4-1.1.3:1.0 eth0: v1.12.13
[ 2311.100942] r8152 4-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 2312.410984] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd
[ 2312.500526] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 2312.500545] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2312.500554] usb 3-1.5: Product: USB Billboard Device
[ 2312.500561] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[ 2312.500567] usb 3-1.5: SerialNumber: 0000000000000001
[ 2313.541364] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on
[ 2366.389869] Non-volatile memory driver v1.3
[ 2366.582865] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 2366.759347] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 2369.486809] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 2772.379177] usb 3-1: USB disconnect, device number 2
[ 2772.379194] usb 3-1.1: USB disconnect, device number 3
[ 2772.380765] usb 3-1.5: USB disconnect, device number 5
[ 2772.476838] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[ 2772.545492] xhci_hcd 0000:39:00.0: HC died; cleaning up
[ 2772.545553] r8152 4-1.1.3:1.0 enx00e04ceb9e75: Stop submitting intr, status -108
[ 2772.562962] xhci_hcd 0000:39:00.0: remove, state 1
[ 2772.562986] usb usb4: USB disconnect, device number 1
[ 2772.644744] usb 4-1: USB disconnect, device number 2
[ 2772.644762] usb 4-1.1: USB disconnect, device number 3
[ 2772.644771] r8152-cfgselector 4-1.1.3: USB disconnect, device number 5
[ 2772.735100] usb 4-1.4: USB disconnect, device number 4
[ 2772.856367] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[ 2772.856411] xhci_hcd 0000:39:00.0: remove, state 1
[ 2772.856421] usb usb3: USB disconnect, device number 1
[ 2772.858082] xhci_hcd 0000:39:00.0: Host halt failed, -19
[ 2772.858094] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[ 2772.858807] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[ 2772.873803] pci_bus 0000:04: Allocating resources
[ 2772.873851] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2772.873866] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2772.873877] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2772.873891] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2772.873901] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2772.873912] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2772.873926] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2772.873942] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2772.873950] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2772.873960] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2772.873966] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2772.873984] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2772.873991] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2772.873999] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2772.874005] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2772.874013] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2772.874019] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2772.874025] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2772.874031] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2772.874039] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2772.874046] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2772.874054] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2772.874061] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2772.874068] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2772.874074] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2772.874082] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2772.874090] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2777.691408] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint
[ 2777.691517] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff]
[ 2777.691557] pci 0000:39:00.0: enabling Extended Tags
[ 2777.691767] pci 0000:39:00.0: supports D1 D2
[ 2777.691774] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2777.692302] pci 0000:39:00.0: Adding to iommu group 21
[ 2777.692413] pcieport 0000:04:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[ 2777.692550] pci_bus 0000:04: Allocating resources
[ 2777.692586] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2777.692599] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2777.692610] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2777.692623] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2777.692632] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2777.692643] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2777.692653] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2777.692666] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2777.692719] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2777.692731] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2777.692738] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2777.692755] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2777.692763] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2777.692770] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2777.692777] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2777.692784] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2777.692790] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2777.692796] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2777.692803] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2777.692811] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2777.692818] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2777.692826] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2777.692833] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2777.692840] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2777.692846] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2777.692853] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2777.692859] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2777.693589] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 2777.693612] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 2777.695184] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 2777.696342] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 2777.696363] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 2777.696381] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 2777.696586] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16
[ 2777.696602] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2777.696614] usb usb3: Product: xHCI Host Controller
[ 2777.696623] usb usb3: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 2777.696632] usb usb3: SerialNumber: 0000:39:00.0
[ 2777.697718] hub 3-0:1.0: USB hub found
[ 2777.697781] hub 3-0:1.0: 2 ports detected
[ 2777.700725] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16
[ 2777.700747] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2777.700760] usb usb4: Product: xHCI Host Controller
[ 2777.700772] usb usb4: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 2777.700783] usb usb4: SerialNumber: 0000:39:00.0
[ 2777.701706] hub 4-0:1.0: USB hub found
[ 2777.701755] hub 4-0:1.0: 2 ports detected
[ 2777.952737] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 2778.095162] usb 3-2: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 2778.095184] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2778.095195] usb 3-2: Product: USB2.0 Hub
[ 2778.095204] usb 3-2: Manufacturer: VIA Labs, Inc.
[ 2778.095212] usb 3-2: SerialNumber: 000000000
[ 2778.097074] hub 3-2:1.0: USB hub found
[ 2778.097287] hub 3-2:1.0: 5 ports detected
[ 2778.812787] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
[ 2778.950614] usb 3-2.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 2778.950633] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2778.950642] usb 3-2.1: Product: USB2.0 Hub
[ 2778.950649] usb 3-2.1: Manufacturer: VIA Labs, Inc.
[ 2778.950656] usb 3-2.1: SerialNumber: 000000000
[ 2778.952049] hub 3-2.1:1.0: USB hub found
[ 2778.952268] hub 3-2.1:1.0: 4 ports detected
[ 2779.196808] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[ 2779.339892] usb 3-2.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 2779.339911] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2779.339921] usb 3-2.4: Product: Mass Storage Device
[ 2779.339928] usb 3-2.4: Manufacturer: Generic
[ 2779.339934] usb 3-2.4: SerialNumber: 158F84688461
[ 2779.342485] usb-storage 3-2.4:1.0: USB Mass Storage device detected
[ 2779.344138] scsi host0: usb-storage 3-2.4:1.0
[ 2779.624820] usb 3-2.1.3: new high-speed USB device number 5 using xhci_hcd
[ 2779.714294] usb 3-2.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 2779.714314] usb 3-2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 2779.714323] usb 3-2.1.3: Product: USB 10/100/1000 LAN
[ 2779.714329] usb 3-2.1.3: Manufacturer: Realtek
[ 2779.714336] usb 3-2.1.3: SerialNumber: 000001
[ 2779.789263] r8152-cfgselector 3-2.1.3: reset high-speed USB device number 5 using xhci_hcd
[ 2779.938790] r8152 3-2.1.3:1.0 eth0: v1.12.13
[ 2780.134480] r8152 3-2.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 2780.378950] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 2780.380786] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 2780.381676] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2780.382547] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 2780.382707] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 2780.383651] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 2780.397147] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2780.409036] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 2780.468716] usb 3-2.5: new high-speed USB device number 6 using xhci_hcd
[ 2780.557816] usb 3-2.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 2780.557827] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2780.557832] usb 3-2.5: Product: USB Billboard Device
[ 2780.557836] usb 3-2.5: Manufacturer: VIA Labs, Inc.
[ 2780.557839] usb 3-2.5: SerialNumber: 0000000000000001
[ 2782.812728] pci_bus 0000:04: Allocating resources
[ 2782.812771] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2782.812788] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2782.812799] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2782.812813] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2782.812822] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2782.812833] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2782.812843] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2782.812856] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2782.812864] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2782.812872] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2782.812878] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2782.812899] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2782.812906] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2782.812913] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2782.812920] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2782.812926] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2782.812932] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2782.812939] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2782.812945] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2782.812954] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2782.812960] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2782.812970] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2782.812976] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2782.812983] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2782.812989] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2782.812996] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2782.813002] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2783.058717] r8152 3-2.1.3:1.0 enx00e04ceb9e75: carrier on
[ 2795.364944] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 2795.409603] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2795.409622] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2795.409631] usb 4-2: Product: USB3.0 Hub
[ 2795.409638] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 2795.409644] usb 4-2: SerialNumber: 000000000
[ 2795.412381] hub 4-2:1.0: USB hub found
[ 2795.416625] hub 4-2:1.0: 4 ports detected
[ 2796.076854] usb 4-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 2796.127514] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2796.127534] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2796.127543] usb 4-2.1: Product: USB3.0 Hub
[ 2796.127550] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 2796.127556] usb 4-2.1: SerialNumber: 000000000
[ 2797.140940] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 2797.141055] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 2797.141530] hub 4-2.1:1.0: USB hub found
[ 2797.162349] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 2797.169871] usb 4-2.1: Failed to suspend device, error -19
[ 2800.260953] usb 4-2: USB disconnect, device number 2
[ 2800.260970] usb 4-2.1: USB disconnect, device number 3
[ 2806.280715] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd
[ 2806.325345] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2806.325361] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2806.325370] usb 4-2: Product: USB3.0 Hub
[ 2806.325377] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 2806.325383] usb 4-2: SerialNumber: 000000000
[ 2806.328057] hub 4-2:1.0: USB hub found
[ 2806.328215] hub 4-2:1.0: 4 ports detected
[ 2806.980786] usb 4-2.1: new SuperSpeed USB device number 5 using xhci_hcd
[ 2807.025645] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2807.025670] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2807.025679] usb 4-2.1: Product: USB3.0 Hub
[ 2807.025694] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 2807.025701] usb 4-2.1: SerialNumber: 000000000
[ 2808.052627] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 2808.052665] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 2808.052875] hub 4-2.1:1.0: USB hub found
[ 2808.073705] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 2808.080691] usb 4-2.1: Failed to suspend device, error -19
[ 2808.952563] usb 4-2: USB disconnect, device number 4
[ 2808.952580] usb 4-2.1: USB disconnect, device number 5
[ 2809.200809] usb 4-2: new SuperSpeed USB device number 6 using xhci_hcd
[ 2809.245199] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2809.245216] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2809.245225] usb 4-2: Product: USB3.0 Hub
[ 2809.245232] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 2809.245239] usb 4-2: SerialNumber: 000000000
[ 2809.248269] hub 4-2:1.0: USB hub found
[ 2809.248393] hub 4-2:1.0: 4 ports detected
[ 2809.892636] usb 4-2.1: new SuperSpeed USB device number 7 using xhci_hcd
[ 2809.937475] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2809.937490] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2809.937498] usb 4-2.1: Product: USB3.0 Hub
[ 2809.937503] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 2809.937509] usb 4-2.1: SerialNumber: 000000000
[ 2810.964624] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 2810.964659] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 2810.964978] hub 4-2.1:1.0: USB hub found
[ 2810.985724] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 2810.992688] usb 4-2.1: Failed to suspend device, error -19
[ 2814.048656] usb 4-2: USB disconnect, device number 6
[ 2814.048673] usb 4-2.1: USB disconnect, device number 7
[ 2815.056646] usb 4-2: new SuperSpeed USB device number 8 using xhci_hcd
[ 2815.101346] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2815.101366] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2815.101375] usb 4-2: Product: USB3.0 Hub
[ 2815.101382] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 2815.101388] usb 4-2: SerialNumber: 000000000
[ 2815.104337] hub 4-2:1.0: USB hub found
[ 2815.104582] hub 4-2:1.0: 4 ports detected
[ 2815.748669] usb 4-2.1: new SuperSpeed USB device number 9 using xhci_hcd
[ 2815.793503] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2815.793530] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2815.793548] usb 4-2.1: Product: USB3.0 Hub
[ 2815.793555] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 2815.793570] usb 4-2.1: SerialNumber: 000000000
[ 2816.820639] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 2816.820685] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 2816.820879] hub 4-2.1:1.0: USB hub found
[ 2816.841671] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 2816.848651] usb 4-2.1: Failed to suspend device, error -19
[ 2819.368518] usb 4-2: USB disconnect, device number 8
[ 2819.368533] usb 4-2.1: USB disconnect, device number 9
[ 2819.640608] usb 4-2: new SuperSpeed USB device number 10 using xhci_hcd
[ 2819.689180] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2819.689199] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2819.689208] usb 4-2: Product: USB3.0 Hub
[ 2819.689215] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 2819.689222] usb 4-2: SerialNumber: 000000000
[ 2819.692587] hub 4-2:1.0: USB hub found
[ 2819.692861] hub 4-2:1.0: 4 ports detected
[ 2820.324592] usb 4-2.1: new SuperSpeed USB device number 11 using xhci_hcd
[ 2820.369497] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2820.369512] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2820.369520] usb 4-2.1: Product: USB3.0 Hub
[ 2820.369526] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 2820.369532] usb 4-2.1: SerialNumber: 000000000
[ 2821.396556] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 2821.396595] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 2821.396830] hub 4-2.1:1.0: USB hub found
[ 2821.417673] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 2821.425207] usb 4-2.1: Failed to suspend device, error -19
[ 2823.108491] usb 4-2: USB disconnect, device number 10
[ 2823.108507] usb 4-2.1: USB disconnect, device number 11
[ 2823.356596] usb 4-2: new SuperSpeed USB device number 12 using xhci_hcd
[ 2823.401234] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2823.401241] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2823.401244] usb 4-2: Product: USB3.0 Hub
[ 2823.401247] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 2823.401249] usb 4-2: SerialNumber: 000000000
[ 2823.403232] hub 4-2:1.0: USB hub found
[ 2823.403419] hub 4-2:1.0: 4 ports detected
[ 2824.036825] usb 4-2.1: new SuperSpeed USB device number 13 using xhci_hcd
[ 2824.081683] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2824.081704] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2824.081713] usb 4-2.1: Product: USB3.0 Hub
[ 2824.081720] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 2824.081726] usb 4-2.1: SerialNumber: 000000000
[ 2825.108669] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 2825.108715] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 2825.108985] hub 4-2.1:1.0: USB hub found
[ 2825.130224] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 2825.137861] usb 4-2.1: Failed to suspend device, error -19
[ 2825.153304] usb 3-2: USB disconnect, device number 2
[ 2825.153356] usb 3-2.1: USB disconnect, device number 3
[ 2825.153364] r8152-cfgselector 3-2.1.3: USB disconnect, device number 5
[ 2825.249301] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[ 2825.249352] xhci_hcd 0000:39:00.0: HC died; cleaning up
[ 2825.335693] xhci_hcd 0000:39:00.0: remove, state 1
[ 2825.335718] usb usb4: USB disconnect, device number 1
[ 2825.343385] usb 3-2.4: USB disconnect, device number 4
[ 2825.344626] usb 4-2: USB disconnect, device number 12
[ 2825.344643] usb 4-2.1: USB disconnect, device number 13
[ 2825.357282] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[ 2825.357320] xhci_hcd 0000:39:00.0: remove, state 1
[ 2825.357336] usb usb3: USB disconnect, device number 1
[ 2825.557147] usb 3-2.5: USB disconnect, device number 6
[ 2825.558407] xhci_hcd 0000:39:00.0: Host halt failed, -19
[ 2825.558418] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[ 2825.558848] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[ 2825.571303] pci_bus 0000:04: Allocating resources
[ 2825.571328] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2825.571338] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2825.571345] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2825.571354] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2825.571360] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2825.571368] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2825.571376] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2825.571385] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2825.571391] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2825.571397] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2825.571401] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2825.571412] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2825.571418] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2825.571423] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2825.571427] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2825.571430] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2825.571434] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2825.571437] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2825.571441] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2825.571446] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2825.571449] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2825.571455] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2825.571459] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2825.571462] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2825.571466] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2825.571470] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2825.571474] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2830.476824] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint
[ 2830.476927] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff]
[ 2830.476964] pci 0000:39:00.0: enabling Extended Tags
[ 2830.477149] pci 0000:39:00.0: supports D1 D2
[ 2830.477155] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2830.477688] pci 0000:39:00.0: Adding to iommu group 21
[ 2830.477787] pcieport 0000:04:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[ 2830.477922] pci_bus 0000:04: Allocating resources
[ 2830.477954] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2830.477966] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2830.477975] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2830.477987] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2830.477995] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2830.478004] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2830.478014] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2830.478025] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2830.478032] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2830.478040] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2830.478045] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2830.478061] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2830.478067] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2830.478073] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2830.478079] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2830.478085] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2830.478090] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2830.478096] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2830.478102] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2830.478111] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2830.478116] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2830.478124] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2830.478130] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2830.478136] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2830.478142] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2830.478148] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2830.478153] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2830.478739] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 2830.478757] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 2830.480093] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 2830.480906] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 2830.480919] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 2830.480930] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 2830.481062] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16
[ 2830.481072] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2830.481079] usb usb3: Product: xHCI Host Controller
[ 2830.481084] usb usb3: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 2830.481090] usb usb3: SerialNumber: 0000:39:00.0
[ 2830.481621] hub 3-0:1.0: USB hub found
[ 2830.481662] hub 3-0:1.0: 2 ports detected
[ 2830.483270] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16
[ 2830.483283] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2830.483290] usb usb4: Product: xHCI Host Controller
[ 2830.483296] usb usb4: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 2830.483302] usb usb4: SerialNumber: 0000:39:00.0
[ 2830.483756] hub 4-0:1.0: USB hub found
[ 2830.483785] hub 4-0:1.0: 2 ports detected
[ 2830.740567] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 2830.878991] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 2830.879012] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2830.879024] usb 3-1: Product: USB2.0 Hub
[ 2830.879034] usb 3-1: Manufacturer: VIA Labs, Inc.
[ 2830.879045] usb 3-1: SerialNumber: 000000000
[ 2830.881195] hub 3-1:1.0: USB hub found
[ 2830.881440] hub 3-1:1.0: 5 ports detected
[ 2831.005015] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 2831.049385] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2831.049405] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2831.049415] usb 4-1: Product: USB3.0 Hub
[ 2831.049421] usb 4-1: Manufacturer: VIA Labs, Inc.
[ 2831.049428] usb 4-1: SerialNumber: 000000000
[ 2831.051856] hub 4-1:1.0: USB hub found
[ 2831.052016] hub 4-1:1.0: 4 ports detected
[ 2831.608542] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[ 2831.746996] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 2831.747015] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2831.747024] usb 3-1.1: Product: USB2.0 Hub
[ 2831.747031] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[ 2831.747037] usb 3-1.1: SerialNumber: 000000000
[ 2831.749587] hub 3-1.1:1.0: USB hub found
[ 2831.749847] hub 3-1.1:1.0: 4 ports detected
[ 2831.843060] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 2831.903321] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2831.903341] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2831.903351] usb 4-1.1: Product: USB3.0 Hub
[ 2831.903358] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[ 2831.903364] usb 4-1.1: SerialNumber: 000000000
[ 2831.908456] hub 4-1.1:1.0: USB hub found
[ 2831.908719] hub 4-1.1:1.0: 4 ports detected
[ 2832.084594] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[ 2832.102410] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 2832.102417] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2832.102421] usb 4-1.4: Product: Mass Storage Device
[ 2832.102424] usb 4-1.4: Manufacturer: Generic
[ 2832.102426] usb 4-1.4: SerialNumber: 058F84688461
[ 2832.104621] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[ 2832.104856] scsi host0: usb-storage 4-1.4:1.0
[ 2832.420463] usb 3-1.1.3: new high-speed USB device number 4 using xhci_hcd
[ 2833.109913] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 2833.111065] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 2833.111740] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2833.112286] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 2833.112333] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 2833.112953] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 2833.144920] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2833.144947] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 2833.152757] usb 4-1.1.3: new SuperSpeed USB device number 5 using xhci_hcd
[ 2833.169793] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 2833.169821] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 2833.169837] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[ 2833.169848] usb 4-1.1.3: Manufacturer: Realtek
[ 2833.169859] usb 4-1.1.3: SerialNumber: 000001
[ 2833.260988] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd
[ 2833.334372] r8152 4-1.1.3:1.0 eth0: v1.12.13
[ 2833.435248] r8152 4-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 2834.980543] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd
[ 2835.069509] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 2835.069530] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2835.069539] usb 3-1.5: Product: USB Billboard Device
[ 2835.069546] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[ 2835.069553] usb 3-1.5: SerialNumber: 0000000000000001
[ 2835.588950] pci_bus 0000:04: Allocating resources
[ 2835.588987] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2835.589002] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2835.589012] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2835.589024] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2835.589032] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2835.589042] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2835.589051] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2835.589063] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2835.589070] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2835.589077] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2835.589083] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2835.589098] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2835.589104] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2835.589111] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2835.589116] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2835.589122] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2835.589128] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2835.589134] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2835.589139] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2835.589147] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2835.589152] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2835.589160] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2835.589166] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2835.589173] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2835.589178] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2835.589184] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2835.589189] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2836.161936] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on
[ 2860.500899] usb 3-1: USB disconnect, device number 2
[ 2860.500916] usb 3-1.1: USB disconnect, device number 3
[ 2860.502614] usb 3-1.5: USB disconnect, device number 5
[ 2860.590918] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[ 2860.649488] xhci_hcd 0000:39:00.0: HC died; cleaning up
[ 2860.649542] r8152 4-1.1.3:1.0 enx00e04ceb9e75: Stop submitting intr, status -108
[ 2860.666274] xhci_hcd 0000:39:00.0: remove, state 1
[ 2860.666282] usb usb4: USB disconnect, device number 1
[ 2860.752310] usb 4-1: USB disconnect, device number 2
[ 2860.752318] usb 4-1.1: USB disconnect, device number 3
[ 2860.752322] r8152-cfgselector 4-1.1.3: USB disconnect, device number 5
[ 2860.825130] usb 4-1.4: USB disconnect, device number 4
[ 2861.022734] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[ 2861.022764] xhci_hcd 0000:39:00.0: remove, state 1
[ 2861.022770] usb usb3: USB disconnect, device number 1
[ 2861.023541] xhci_hcd 0000:39:00.0: Host halt failed, -19
[ 2861.023550] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[ 2861.024111] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[ 2861.036654] pci_bus 0000:04: Allocating resources
[ 2861.036673] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2861.036679] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2861.036683] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2861.036688] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2861.036691] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2861.036695] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2861.036698] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2861.036704] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2861.036706] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2861.036709] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2861.036711] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2861.036718] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2861.036720] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2861.036723] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2861.036725] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2861.036727] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2861.036729] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2861.036732] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2861.036734] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2861.036737] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2861.036739] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2861.036742] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2861.036744] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2861.036747] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2861.036749] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2861.036751] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2861.036753] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2865.692673] snd_hda_intel 0000:00:1f.3: Unstable LPIB (253720 >= 8192); disabling LPIB delay counting
[ 2865.713469] pcieport 0000:04:00.0: Unable to change power state from D3hot to D0, device inaccessible
[ 2865.716004] pci_bus 0000:05: busn_res: [bus 05] is released
[ 2865.716728] pci_bus 0000:06: busn_res: [bus 06-38] is released
[ 2865.717503] pci_bus 0000:39: busn_res: [bus 39] is released
[ 2865.718725] pci_bus 0000:3a: busn_res: [bus 3a-6d] is released
[ 2865.719131] pci_bus 0000:04: busn_res: [bus 04-6d] is released
[ 2867.300404] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[ 2867.439937] usb 1-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 2867.439954] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2867.439962] usb 1-1: Product: USB2.0 Hub
[ 2867.439969] usb 1-1: Manufacturer: VIA Labs, Inc.
[ 2867.439974] usb 1-1: SerialNumber: 000000000
[ 2867.441986] hub 1-1:1.0: USB hub found
[ 2867.442288] hub 1-1:1.0: 5 ports detected
[ 2867.566556] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 2867.613375] usb 2-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2867.613399] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2867.613412] usb 2-1: Product: USB3.0 Hub
[ 2867.613423] usb 2-1: Manufacturer: VIA Labs, Inc.
[ 2867.613433] usb 2-1: SerialNumber: 000000000
[ 2867.616019] hub 2-1:1.0: USB hub found
[ 2867.616359] hub 2-1:1.0: 4 ports detected
[ 2868.164282] usb 1-1.1: new high-speed USB device number 6 using xhci_hcd
[ 2868.312606] usb 1-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 2868.312621] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2868.312628] usb 1-1.1: Product: USB2.0 Hub
[ 2868.312634] usb 1-1.1: Manufacturer: VIA Labs, Inc.
[ 2868.312639] usb 1-1.1: SerialNumber: 000000000
[ 2868.314458] hub 1-1.1:1.0: USB hub found
[ 2868.314699] hub 1-1.1:1.0: 4 ports detected
[ 2868.408096] usb 2-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 2868.467878] usb 2-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2868.467897] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2868.467905] usb 2-1.1: Product: USB3.0 Hub
[ 2868.467911] usb 2-1.1: Manufacturer: VIA Labs, Inc.
[ 2868.467916] usb 2-1.1: SerialNumber: 000000000
[ 2868.473244] hub 2-1.1:1.0: USB hub found
[ 2868.473406] hub 2-1.1:1.0: 4 ports detected
[ 2868.660367] usb 2-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[ 2868.683395] usb 2-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 2868.683538] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2868.683673] usb 2-1.4: Product: Mass Storage Device
[ 2868.683677] usb 2-1.4: Manufacturer: Generic
[ 2868.683813] usb 2-1.4: SerialNumber: 058F84688461
[ 2868.689158] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[ 2868.689661] scsi host0: usb-storage 2-1.4:1.0
[ 2869.664558] usb 2-1.1.3: new SuperSpeed USB device number 5 using xhci_hcd
[ 2869.681764] usb 2-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 2869.681783] usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 2869.681791] usb 2-1.1.3: Product: USB 10/100/1000 LAN
[ 2869.681797] usb 2-1.1.3: Manufacturer: Realtek
[ 2869.681803] usb 2-1.1.3: SerialNumber: 000001
[ 2869.718221] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 2869.719319] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 2869.720098] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2869.720855] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 2869.720920] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 2869.721529] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 2869.752068] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2869.757165] r8152-cfgselector 2-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd
[ 2869.763978] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 2869.836666] r8152 2-1.1.3:1.0 eth0: v1.12.13
[ 2870.018545] r8152 2-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 2872.296335] usb 1-1.5: new high-speed USB device number 8 using xhci_hcd
[ 2872.386472] usb 1-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 2872.386490] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2872.386498] usb 1-1.5: Product: USB Billboard Device
[ 2872.386504] usb 1-1.5: Manufacturer: VIA Labs, Inc.
[ 2872.386510] usb 1-1.5: SerialNumber: 0000000000000001
[ 2872.944609] r8152 2-1.1.3:1.0 enx00e04ceb9e75: carrier on
[ 2912.032467] usb 1-1: USB disconnect, device number 5
[ 2912.032483] usb 1-1.1: USB disconnect, device number 6
[ 2912.034011] usb 1-1.5: USB disconnect, device number 8
[ 2912.114292] r8152 2-1.1.3:1.0 enx00e04ceb9e75: Stop submitting intr, status -71
[ 2912.144123] usb 2-1: USB disconnect, device number 2
[ 2912.144136] usb 2-1.1: USB disconnect, device number 3
[ 2912.144143] r8152-cfgselector 2-1.1.3: USB disconnect, device number 5
[ 2912.222677] usb 2-1.4: USB disconnect, device number 4
[ 2921.899075] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Upstream Port
[ 2921.899139] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 2921.899162] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 2921.899186] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 2921.899213] pci 0000:03:00.0: enabling Extended Tags
[ 2921.899639] pci 0000:03:00.0: supports D1 D2
[ 2921.899645] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2922.035209] pci 0000:03:00.0: Adding to iommu group 18
[ 2922.035661] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 2922.035718] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 2922.035737] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 2922.035781] pci 0000:04:00.0: enabling Extended Tags
[ 2922.035948] pci 0000:04:00.0: supports D1 D2
[ 2922.035954] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2922.036445] pci 0000:04:00.0: Adding to iommu group 19
[ 2922.036690] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 2922.036748] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 2922.036768] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 2922.036790] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 2922.036817] pci 0000:04:01.0: enabling Extended Tags
[ 2922.036996] pci 0000:04:01.0: supports D1 D2
[ 2922.037002] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2922.037406] pci 0000:04:01.0: Adding to iommu group 20
[ 2922.037664] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 2922.037717] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 2922.037736] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 2922.037780] pci 0000:04:02.0: enabling Extended Tags
[ 2922.037944] pci 0000:04:02.0: supports D1 D2
[ 2922.037949] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2922.038367] pci 0000:04:02.0: Adding to iommu group 21
[ 2922.038732] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 2922.038793] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 2922.038815] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 2922.038842] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 2922.038875] pci 0000:04:04.0: enabling Extended Tags
[ 2922.039347] pci 0000:04:04.0: supports D1 D2
[ 2922.039357] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2922.039885] pci 0000:04:04.0: Adding to iommu group 22
[ 2922.040238] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 2922.040418] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 2922.040566] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 2922.040862] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint
[ 2922.040962] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff]
[ 2922.041000] pci 0000:39:00.0: enabling Extended Tags
[ 2922.041201] pci 0000:39:00.0: supports D1 D2
[ 2922.041208] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2922.042377] pci 0000:39:00.0: Adding to iommu group 21
[ 2922.042565] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 2922.042787] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 2922.042884] pci_bus 0000:04: Allocating resources
[ 2922.042925] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2922.042939] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2922.042952] pci 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2922.042968] pci 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2922.042981] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2922.042996] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2922.043012] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2922.043030] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2922.043040] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2922.043052] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2922.043062] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2922.043085] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2922.043098] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2922.043108] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.043116] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2922.043126] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.043133] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2922.043141] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.043149] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2922.043160] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.043171] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2922.043185] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2922.043194] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2922.043204] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.043213] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2922.043222] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.043232] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2922.043244] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 2922.043261] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 2922.043287] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 2922.043302] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 2922.043319] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 2922.043340] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 2922.043356] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 2922.043375] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 2922.043389] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 2922.043401] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 2922.043420] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 2922.043432] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 2922.043444] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 2922.046142] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 2922.046170] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 2922.047637] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 2922.048580] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 2922.048593] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 2922.048604] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 2922.048722] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16
[ 2922.048732] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2922.048738] usb usb3: Product: xHCI Host Controller
[ 2922.048744] usb usb3: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 2922.048749] usb usb3: SerialNumber: 0000:39:00.0
[ 2922.049261] hub 3-0:1.0: USB hub found
[ 2922.049289] hub 3-0:1.0: 2 ports detected
[ 2922.050613] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16
[ 2922.050624] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2922.050631] usb usb4: Product: xHCI Host Controller
[ 2922.050636] usb usb4: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 2922.050641] usb usb4: SerialNumber: 0000:39:00.0
[ 2922.051276] hub 4-0:1.0: USB hub found
[ 2922.051304] hub 4-0:1.0: 2 ports detected
[ 2922.056923] pci_bus 0000:04: Allocating resources
[ 2922.056966] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 2922.056984] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 2922.056997] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 2922.057014] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 2922.057024] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 2922.057037] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 2922.057049] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 2922.057064] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2922.057073] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2922.057083] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 2922.057091] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 2922.057113] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2922.057122] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2922.057130] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.057138] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2922.057146] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.057153] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2922.057161] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.057168] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2922.057179] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.057187] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 2922.057197] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 2922.057205] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 2922.057214] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.057221] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 2922.057229] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 2922.057237] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 2922.296108] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 2922.437828] usb 3-2: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 2922.437843] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2922.437851] usb 3-2: Product: USB2.0 Hub
[ 2922.437857] usb 3-2: Manufacturer: VIA Labs, Inc.
[ 2922.437863] usb 3-2: SerialNumber: 000000000
[ 2922.440276] hub 3-2:1.0: USB hub found
[ 2922.440507] hub 3-2:1.0: 5 ports detected
[ 2923.156121] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
[ 2923.294120] usb 3-2.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 2923.294146] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2923.294154] usb 3-2.1: Product: USB2.0 Hub
[ 2923.294160] usb 3-2.1: Manufacturer: VIA Labs, Inc.
[ 2923.294166] usb 3-2.1: SerialNumber: 000000000
[ 2923.295623] hub 3-2.1:1.0: USB hub found
[ 2923.295906] hub 3-2.1:1.0: 4 ports detected
[ 2923.668126] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[ 2923.807169] usb 3-2.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 2923.807184] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2923.807192] usb 3-2.4: Product: Mass Storage Device
[ 2923.807198] usb 3-2.4: Manufacturer: Generic
[ 2923.807204] usb 3-2.4: SerialNumber: 158F84688461
[ 2923.809631] usb-storage 3-2.4:1.0: USB Mass Storage device detected
[ 2923.810048] scsi host0: usb-storage 3-2.4:1.0
[ 2923.972039] usb 3-2.1.3: new high-speed USB device number 5 using xhci_hcd
[ 2924.061547] usb 3-2.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 2924.061565] usb 3-2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 2924.061574] usb 3-2.1.3: Product: USB 10/100/1000 LAN
[ 2924.061580] usb 3-2.1.3: Manufacturer: Realtek
[ 2924.061585] usb 3-2.1.3: SerialNumber: 000001
[ 2924.136479] r8152-cfgselector 3-2.1.3: reset high-speed USB device number 5 using xhci_hcd
[ 2924.281518] r8152 3-2.1.3:1.0 eth0: v1.12.13
[ 2924.460524] r8152 3-2.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 2924.822065] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 2924.823743] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 2924.824577] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2924.825377] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 2924.825402] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 2924.826237] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 2924.844470] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2924.844493] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 2927.112044] usb 3-2.5: new high-speed USB device number 6 using xhci_hcd
[ 2927.201069] usb 3-2.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 2927.201089] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2927.201098] usb 3-2.5: Product: USB Billboard Device
[ 2927.201105] usb 3-2.5: Manufacturer: VIA Labs, Inc.
[ 2927.201112] usb 3-2.5: SerialNumber: 0000000000000001
[ 2927.794839] r8152 3-2.1.3:1.0 enx00e04ceb9e75: carrier on
[ 2952.452399] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 2952.496947] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 2952.496967] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2952.496976] usb 4-2: Product: USB3.0 Hub
[ 2952.496984] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 2952.496990] usb 4-2: SerialNumber: 000000000
[ 2952.499932] hub 4-2:1.0: USB hub found
[ 2952.500251] hub 4-2:1.0: 4 ports detected
[ 2953.164385] usb 4-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 2953.209404] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 2953.209424] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2953.209433] usb 4-2.1: Product: USB3.0 Hub
[ 2953.209440] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 2953.209447] usb 4-2.1: SerialNumber: 000000000
[ 2954.228050] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 2954.228104] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 2954.228410] hub 4-2.1:1.0: USB hub found
[ 2954.250836] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 2954.258490] usb 4-2.1: Failed to suspend device, error -19
[ 2957.348065] usb 4-2: USB disconnect, device number 2
[ 2957.348082] usb 4-2.1: USB disconnect, device number 3
[ 3088.875532] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd
[ 3088.920032] usb 4-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 3088.920051] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3088.920060] usb 4-2: Product: USB3.0 Hub
[ 3088.920067] usb 4-2: Manufacturer: VIA Labs, Inc.
[ 3088.920073] usb 4-2: SerialNumber: 000000000
[ 3088.923155] hub 4-2:1.0: USB hub found
[ 3088.923408] hub 4-2:1.0: 4 ports detected
[ 3089.575545] usb 4-2.1: new SuperSpeed USB device number 5 using xhci_hcd
[ 3089.620770] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 3089.620790] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3089.620800] usb 4-2.1: Product: USB3.0 Hub
[ 3089.620807] usb 4-2.1: Manufacturer: VIA Labs, Inc.
[ 3089.620813] usb 4-2.1: SerialNumber: 000000000
[ 3090.643537] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 3090.643652] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
[ 3090.644310] hub 4-2.1:1.0: USB hub found
[ 3090.665198] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
[ 3090.672698] usb 4-2.1: Failed to suspend device, error -19
[ 3093.775267] usb 4-2: USB disconnect, device number 4
[ 3093.775274] usb 4-2.1: USB disconnect, device number 5
[ 3106.919608] usb 3-2: USB disconnect, device number 2
[ 3106.919636] usb 3-2.1: USB disconnect, device number 3
[ 3106.919645] r8152-cfgselector 3-2.1.3: USB disconnect, device number 5
[ 3106.988039] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[ 3106.988079] xhci_hcd 0000:39:00.0: HC died; cleaning up
[ 3107.013243] xhci_hcd 0000:39:00.0: remove, state 1
[ 3107.013267] usb usb4: USB disconnect, device number 1
[ 3107.016749] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[ 3107.016784] xhci_hcd 0000:39:00.0: remove, state 1
[ 3107.016798] usb usb3: USB disconnect, device number 1
[ 3107.042386] usb 3-2.4: USB disconnect, device number 4
[ 3107.235606] usb 3-2.5: USB disconnect, device number 6
[ 3107.236626] xhci_hcd 0000:39:00.0: Host halt failed, -19
[ 3107.236633] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[ 3107.237143] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[ 3107.237841] pcieport 0000:04:00.0: Unable to change power state from D3hot to D0, device inaccessible
[ 3107.241251] pci_bus 0000:05: busn_res: [bus 05] is released
[ 3107.241813] pci_bus 0000:06: busn_res: [bus 06-38] is released
[ 3107.242900] pci_bus 0000:39: busn_res: [bus 39] is released
[ 3107.243932] pci_bus 0000:3a: busn_res: [bus 3a-6d] is released
[ 3107.244331] pci_bus 0000:04: busn_res: [bus 04-6d] is released
[ 3112.305709] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Upstream Port
[ 3112.305770] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 3112.305792] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 3112.305815] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 3112.305842] pci 0000:03:00.0: enabling Extended Tags
[ 3112.306002] pci 0000:03:00.0: supports D1 D2
[ 3112.306008] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3112.306576] pci 0000:03:00.0: Adding to iommu group 18
[ 3112.307035] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 3112.307123] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 3112.307149] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 3112.307194] pci 0000:04:00.0: enabling Extended Tags
[ 3112.307357] pci 0000:04:00.0: supports D1 D2
[ 3112.307362] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3112.307815] pci 0000:04:00.0: Adding to iommu group 19
[ 3112.308046] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 3112.308100] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 3112.308120] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 3112.308143] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 3112.308171] pci 0000:04:01.0: enabling Extended Tags
[ 3112.308332] pci 0000:04:01.0: supports D1 D2
[ 3112.308337] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3112.308718] pci 0000:04:01.0: Adding to iommu group 20
[ 3112.308958] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 3112.309012] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 3112.309032] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 3112.309076] pci 0000:04:02.0: enabling Extended Tags
[ 3112.309231] pci 0000:04:02.0: supports D1 D2
[ 3112.309237] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3112.309647] pci 0000:04:02.0: Adding to iommu group 21
[ 3112.309906] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port
[ 3112.309962] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 3112.309982] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 3112.310005] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 3112.310033] pci 0000:04:04.0: enabling Extended Tags
[ 3112.310199] pci 0000:04:04.0: supports D1 D2
[ 3112.310204] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3112.310493] pci 0000:04:04.0: Adding to iommu group 22
[ 3112.310737] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 3112.310874] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 3112.311007] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 3112.311268] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint
[ 3112.311375] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff]
[ 3112.311414] pci 0000:39:00.0: enabling Extended Tags
[ 3112.311611] pci 0000:39:00.0: supports D1 D2
[ 3112.311620] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3112.312259] pci 0000:39:00.0: Adding to iommu group 21
[ 3112.312414] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 3112.312588] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 3112.312680] pci_bus 0000:04: Allocating resources
[ 3112.312721] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 3112.312736] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 3112.312748] pci 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 3112.312763] pci 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 3112.312774] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 3112.312787] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 3112.312800] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 3112.312815] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 3112.312824] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 3112.312834] pci 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 3112.312841] pci 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 3112.312861] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 3112.312870] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 3112.312879] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 3112.312887] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 3112.312895] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 3112.312903] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 3112.312912] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 3112.312920] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 3112.312931] pci 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 3112.312938] pci 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 3112.312950] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 3112.312959] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 3112.312968] pci 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 3112.312976] pci 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 3112.312985] pci 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 3112.312993] pci 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 3112.313004] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 3112.313019] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 3112.313043] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 3112.313057] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 3112.313070] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 3112.313090] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 3112.313104] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 3112.313126] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 3112.313139] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 3112.313150] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 3112.313165] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 3112.313176] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 3112.313187] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 3112.315789] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 3112.315813] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 3112.317199] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 3112.317931] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 3112.317945] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 3112.317955] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 3112.318099] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16
[ 3112.318110] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3112.318117] usb usb3: Product: xHCI Host Controller
[ 3112.318122] usb usb3: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 3112.318128] usb usb3: SerialNumber: 0000:39:00.0
[ 3112.318655] hub 3-0:1.0: USB hub found
[ 3112.318694] hub 3-0:1.0: 2 ports detected
[ 3112.320760] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16
[ 3112.320778] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3112.320788] usb usb4: Product: xHCI Host Controller
[ 3112.320796] usb usb4: Manufacturer: Linux 6.16-amd64 xhci-hcd
[ 3112.320804] usb usb4: SerialNumber: 0000:39:00.0
[ 3112.321287] hub 4-0:1.0: USB hub found
[ 3112.321317] hub 4-0:1.0: 2 ports detected
[ 3112.571205] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 3112.712554] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 3112.712570] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3112.712577] usb 3-1: Product: USB2.0 Hub
[ 3112.712584] usb 3-1: Manufacturer: VIA Labs, Inc.
[ 3112.712590] usb 3-1: SerialNumber: 000000000
[ 3112.715302] hub 3-1:1.0: USB hub found
[ 3112.715468] hub 3-1:1.0: 5 ports detected
[ 3112.838303] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3112.885264] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 3112.885289] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3112.885301] usb 4-1: Product: USB3.0 Hub
[ 3112.885311] usb 4-1: Manufacturer: VIA Labs, Inc.
[ 3112.885320] usb 4-1: SerialNumber: 000000000
[ 3112.892700] hub 4-1:1.0: USB hub found
[ 3112.892979] hub 4-1:1.0: 4 ports detected
[ 3113.435206] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[ 3113.577870] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 3113.577887] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3113.577895] usb 3-1.1: Product: USB2.0 Hub
[ 3113.577902] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[ 3113.577909] usb 3-1.1: SerialNumber: 000000000
[ 3113.579503] hub 3-1.1:1.0: USB hub found
[ 3113.579712] hub 3-1.1:1.0: 4 ports detected
[ 3113.672907] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 3113.732825] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 3113.732844] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3113.732853] usb 4-1.1: Product: USB3.0 Hub
[ 3113.732860] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[ 3113.732867] usb 4-1.1: SerialNumber: 000000000
[ 3113.735293] hub 4-1.1:1.0: USB hub found
[ 3113.735842] hub 4-1.1:1.0: 4 ports detected
[ 3113.911315] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[ 3113.934200] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 3113.934219] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3113.934228] usb 4-1.4: Product: Mass Storage Device
[ 3113.934236] usb 4-1.4: Manufacturer: Generic
[ 3113.934242] usb 4-1.4: SerialNumber: 058F84688461
[ 3113.943258] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[ 3113.944062] scsi host0: usb-storage 4-1.4:1.0
[ 3114.915171] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd
[ 3114.965215] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 3114.966565] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 3114.967604] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3114.968227] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 3114.968396] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 3114.969176] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 3114.999648] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 3115.003769] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3115.008451] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 3115.008474] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3115.008488] usb 3-1.5: Product: USB Billboard Device
[ 3115.008498] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[ 3115.008507] usb 3-1.5: SerialNumber: 0000000000000001
[ 3117.369149] pci_bus 0000:04: Allocating resources
[ 3117.369191] pcieport 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 3117.369207] pcieport 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 3117.369219] pcieport 0000:03:00.0: Assigned bridge window [mem 0x60000000-0xa9ffffff 64bit pref] to [bus 04-6d] cannot fit 0x200000 required for 0000:04:02.0 bridging to [bus 39]
[ 3117.369232] pcieport 0000:04:02.0: bridge window [mem 0x00000000 64bit pref] to [bus 39] requires relaxed alignment rules
[ 3117.369241] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 3117.369252] pcieport 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 3117.369262] pcieport 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 3117.369275] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 3117.369283] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 3117.369292] pcieport 0000:03:00.0: bridge window [io size 0x3000]: can't assign; no space
[ 3117.369298] pcieport 0000:03:00.0: bridge window [io size 0x3000]: failed to assign
[ 3117.369315] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 3117.369322] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 3117.369329] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 3117.369336] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
[ 3117.369342] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 3117.369348] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 3117.369355] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 3117.369361] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 3117.369370] pcieport 0000:04:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 3117.369376] pcieport 0000:04:04.0: bridge window [io size 0x1000]: failed to assign
[ 3117.369385] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 3117.369392] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 3117.369399] pcieport 0000:04:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 3117.369405] pcieport 0000:04:02.0: bridge window [io size 0x1000]: failed to assign
[ 3117.369411] pcieport 0000:04:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 3117.369418] pcieport 0000:04:01.0: bridge window [io size 0x1000]: failed to assign
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Plugging USB-C adapter into one port results in `Failed to set U2 timeout to 0x3f,error code -110`
2025-08-13 7:47 Plugging USB-C adapter into one port results in `Failed to set U2 timeout to 0x3f,error code -110` Paul Menzel
@ 2025-08-14 13:49 ` Mathias Nyman
2025-08-21 7:44 ` Paul Menzel
0 siblings, 1 reply; 4+ messages in thread
From: Mathias Nyman @ 2025-08-14 13:49 UTC (permalink / raw)
To: Paul Menzel, Greg Kroah-Hartman; +Cc: Mathias Nyman, linux-usb, Kai-Heng Feng
On 13.8.2025 10.47, Paul Menzel wrote:
> Dear Linux folks,
>
>
> On an Intel Kaby Lake-R Dell XPS 13 9370, plugging in an 8-port LMP USB-C mini Dock into the port on the left side closer to the panel, Linux 6.16 logs:
>
> [ 0.000000] Linux version 6.16-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.16-1~exp1 (2025-07-31)
> […]
> [ 0.000000] DMI: Dell Inc. XPS 13 9370/0RMYH9, BIOS 1.21.0 07/06/2022
> […]
> [ 99.566522] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
> [ 99.566565] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
> [ 99.566787] hub 4-2.1:1.0: USB hub found
> [ 99.587655] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
> [ 99.594669] usb 4-2.1: Failed to suspend device, error -19
> […]
>
Looks like the left side port is connected to a PCI hotpluggable Alpine Ridge xHCI controller.
This whole xHCI host will only appear on the PCI bus once a device is connected to the USB-C port
The right side port is handled by the other xHC that is always visible and already properly running.
The logs point towards Link Power Management or, runtime suspend race
issues with the two chained external USB 3 hubs.
Could you try running with the following kernel parameters set:
"usbcore.quirks=2109:0817:k"
to prevent Link Power Management (LPM) for the external hubs
"usbcore.autosuspend=-1"
to prevent runtime suspend of all usb devices
Does adding either one, or both help?
Could you also take logs and traces with dynamic debug and tracing enabled:
mount -t debugfs none /sys/kernel/debug
echo 'module xhci_hcd =p' >/sys/kernel/debug/dynamic_debug/control
echo 'module usbcore =p' >/sys/kernel/debug/dynamic_debug/control
echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb
echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable
echo 1 > /sys/kernel/debug/tracing/tracing_on
< Reproduce issue >
Send output of dmesg
Send content of /sys/kernel/debug/tracing/trace
Thanks
Mathias
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Plugging USB-C adapter into one port results in `Failed to set U2 timeout to 0x3f,error code -110`
2025-08-14 13:49 ` Mathias Nyman
@ 2025-08-21 7:44 ` Paul Menzel
2025-08-21 14:40 ` Mathias Nyman
0 siblings, 1 reply; 4+ messages in thread
From: Paul Menzel @ 2025-08-21 7:44 UTC (permalink / raw)
To: Mathias Nyman; +Cc: Greg Kroah-Hartman, Mathias Nyman, linux-usb, Kai-Heng Feng
Dear Mathias,
Thank you for your reply.
Am 14.08.25 um 15:49 schrieb Mathias Nyman:
> On 13.8.2025 10.47, Paul Menzel wrote:
>> On an Intel Kaby Lake-R Dell XPS 13 9370, plugging in an 8-port LMP
>> USB-C mini Dock into the port on the left side closer to the panel,
>> Linux 6.16 logs:
>>
>> [ 0.000000] Linux version 6.16-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.16-1~exp1 (2025-07-31)
>> […]
>> [ 0.000000] DMI: Dell Inc. XPS 13 9370/0RMYH9, BIOS 1.21.0 07/06/2022
>> […]
>> [ 99.566522] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
>> [ 99.566565] usb 4-2.1: Failed to set U2 timeout to 0x3f,error code -110
>> [ 99.566787] hub 4-2.1:1.0: USB hub found
>> [ 99.587655] hub 4-2.1:1.0: config failed, can't read hub descriptor (err -22)
>> [ 99.594669] usb 4-2.1: Failed to suspend device, error -19
>> […]
>
> Looks like the left side port is connected to a PCI hotpluggable Alpine
> Ridge xHCI controller.
> This whole xHCI host will only appear on the PCI bus once a device is
> connected to the USB-C port
>
> The right side port is handled by the other xHC that is always visible
> and already properly running.
>
> The logs point towards Link Power Management or, runtime suspend race
> issues with the two chained external USB 3 hubs.
>
> Could you try running with the following kernel parameters set:
> "usbcore.quirks=2109:0817:k"
> to prevent Link Power Management (LPM) for the external hubs
With this set, I am unable to reproduce this.
> "usbcore.autosuspend=-1"
> to prevent runtime suspend of all usb devices
>
> Does adding either one, or both help?
I only tried the first one. Is that enough?
> Could you also take logs and traces with dynamic debug and tracing enabled:
>
> mount -t debugfs none /sys/kernel/debug
> echo 'module xhci_hcd =p' >/sys/kernel/debug/dynamic_debug/control
> echo 'module usbcore =p' >/sys/kernel/debug/dynamic_debug/control
> echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb
> echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable
> echo 1 > /sys/kernel/debug/tracing/tracing_on
> < Reproduce issue >
> Send output of dmesg
> Send content of /sys/kernel/debug/tracing/trace
I uploaded everything to the Linux Kernel Bugzilla [1].
Kind regards,
Paul
PS: I was not able to reproduce the issue at work with the same adapter
model. At home there is a Vodafone router, and at work a Zyxel switch.
No idea, if other things like running on battery play a role. Anyway, at
home, I was able to reproduce it.
[1]: https://bugzilla.kernel.org/show_bug.cgi?id=220460
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Plugging USB-C adapter into one port results in `Failed to set U2 timeout to 0x3f,error code -110`
2025-08-21 7:44 ` Paul Menzel
@ 2025-08-21 14:40 ` Mathias Nyman
0 siblings, 0 replies; 4+ messages in thread
From: Mathias Nyman @ 2025-08-21 14:40 UTC (permalink / raw)
To: Paul Menzel; +Cc: Greg Kroah-Hartman, Mathias Nyman, linux-usb, Kai-Heng Feng
Hi
>> Could you try running with the following kernel parameters set:
>> "usbcore.quirks=2109:0817:k"
>> to prevent Link Power Management (LPM) for the external hubs
>
> With this set, I am unable to reproduce this.
good, that narrow this down to LPM
>
>> "usbcore.autosuspend=-1"
>> to prevent runtime suspend of all usb devices
>>
>> Does adding either one, or both help?
>
> I only tried the first one. Is that enough?
Yes, this is enough thanks, your trace file shows the USB link goes to "error Inactive" state
shortly after enabling link power management.
> I uploaded everything to the Linux Kernel Bugzilla [1].
>
> [1]: https://bugzilla.kernel.org/show_bug.cgi?id=220460
>
I'll add more details to the bug
Thanks
Mathias
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2025-08-21 14:40 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-08-13 7:47 Plugging USB-C adapter into one port results in `Failed to set U2 timeout to 0x3f,error code -110` Paul Menzel
2025-08-14 13:49 ` Mathias Nyman
2025-08-21 7:44 ` Paul Menzel
2025-08-21 14:40 ` Mathias Nyman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).