From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Macpaul Lin <macpaul.lin@mediatek.com>,
Chen-Yu Tsai <wenst@chromium.org>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: usb: ti,usb8041: Fold in TI USB8020B
Date: Tue, 03 Nov 2026 12:16:17 +0100 [thread overview]
Message-ID: <3928338.mvXUDI8C0e@steina-w> (raw)
In-Reply-To: <20261103095425.3097720-1-wenst@chromium.org>
Am Dienstag, 3. November 2026, 10:53:29 Mitteleuropäische Normalzeit schrieb Chen-Yu Tsai:
> TI USB8020B is another USB 3.0 hub that currently has a separate yet
> similar, albeit more limited binding.
>
> Fold the TI USB8020B compatibles into the TI USB8041 binding, thus
> allowing the TI USB8020B to correctly allow downstream ports through
> the common USB hub binding.
>
> The requirement of "peer-hub" is relaxed, as done in commit e44297dd2b75
> ("dt-bindings: usb: ti,usb8041: Support nested USB hubs"). The hub chip
> might only have its HighSpeed data lines connected, and thus would not
> have a SuperSpeed peer hub.
>
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Looks good to me:
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> Cc: Macpaul Lin <macpaul.lin@mediatek.com>
> ---
> .../devicetree/bindings/usb/ti,usb8020b.yaml | 69 -------------------
> .../devicetree/bindings/usb/ti,usb8041.yaml | 5 +-
> 2 files changed, 4 insertions(+), 70 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
> deleted file mode 100644
> index 61217da8b2f3..000000000000
> --- a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
> +++ /dev/null
> @@ -1,69 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: TI USB8020B USB 3.0 hub controller
> -
> -maintainers:
> - - Macpaul Lin <macpaul.lin@mediatek.com>
> -
> -allOf:
> - - $ref: usb-device.yaml#
> -
> -properties:
> - compatible:
> - enum:
> - - usb451,8025
> - - usb451,8027
> -
> - reg: true
> -
> - reset-gpios:
> - items:
> - - description: GPIO specifier for GRST# pin.
> -
> - vdd-supply:
> - description:
> - VDD power supply to the hub
> -
> - peer-hub:
> - $ref: /schemas/types.yaml#/definitions/phandle
> - description:
> - phandle to the peer hub on the controller.
> -
> -required:
> - - compatible
> - - reg
> - - peer-hub
> -
> -additionalProperties: false
> -
> -examples:
> - - |
> - #include <dt-bindings/gpio/gpio.h>
> -
> - usb {
> - dr_mode = "host";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* 2.0 hub on port 1 */
> - hub_2_0: hub@1 {
> - compatible = "usb451,8027";
> - reg = <1>;
> - peer-hub = <&hub_3_0>;
> - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
> - vdd-supply = <&usb_hub_fixed_3v3>;
> - };
> -
> - /* 3.0 hub on port 2 */
> - hub_3_0: hub@2 {
> - compatible = "usb451,8025";
> - reg = <2>;
> - peer-hub = <&hub_2_0>;
> - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
> - vdd-supply = <&usb_hub_fixed_3v3>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
> index 07e13fae640b..74021d13a43a 100644
> --- a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
> @@ -4,10 +4,11 @@
> $id: http://devicetree.org/schemas/usb/ti,usb8041.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: TI USB8041 and USB8044 USB 3.0 hub controllers
> +title: TI USB80xx USB 3.0 hub controllers
>
> maintainers:
> - Alexander Stein <alexander.stein@ew.tq-group.com>
> + - Macpaul Lin <macpaul.lin@mediatek.com>
>
> allOf:
> - $ref: usb-device.yaml#
> @@ -16,6 +17,8 @@ allOf:
> properties:
> compatible:
> enum:
> + - usb451,8025
> + - usb451,8027
> - usb451,8140
> - usb451,8142
> - usb451,8440
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
prev parent reply other threads:[~2026-11-03 11:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-03 9:53 [PATCH] dt-bindings: usb: ti,usb8041: Fold in TI USB8020B Chen-Yu Tsai
2026-11-03 9:57 ` sashiko-bot
2026-11-03 11:16 ` Alexander Stein [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3928338.mvXUDI8C0e@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk+dt@kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=macpaul.lin@mediatek.com \
--cc=robh@kernel.org \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox