Re: [PATCH v8 08/11] arm64: dts: qcom: qrb5165-rb5: Switch on Type-C VBUS boost

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 15/05/2023 16:36, Bryan O'Donoghue wrote:
> Switch on VBUS for the Type-C port. We need to support a higher amperage
> than the bootloader set 2 Amps.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index dd924331b0eea..b326bdeeb7742 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -1338,3 +1338,9 @@ &qup_spi0_data_clk {
>   	drive-strength = <6>;
>   	bias-disable;
>   };
> +
> +&pm8150b_vbus {
> +	regulator-min-microamp = <500000>;
> +	regulator-max-microamp = <3000000>;
> +	status = "okay";
> +};

Note, you are placing this declaration (and further changes in the next 
patches) at the end of the file, in the pinctrl area. Please move them 
up into a correct place.

-- 
With best wishes
Dmitry