[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller.

[Roger Quadros <rogerq@ti.com>]

On 18/11/18 12:08, Pawel Laszczak wrote:
> Thsi patch aim at documenting USB related dt-bindings for the

s/Thsi/This

> Cadence USBSS-DRD controller.
> 
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
>  .../devicetree/bindings/usb/cdns3-usb.txt       | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/cdns3-usb.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/cdns3-usb.txt b/Documentation/devicetree/bindings/usb/cdns3-usb.txt
> new file mode 100644
> index 000000000000..f9e953f32d47
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cdns3-usb.txt
> @@ -0,0 +1,17 @@
> +Binding for the Cadence USBSS-DRD controller
> +
> +Required properties:
> +  - reg: Physical base address and size of the controller's register area.
> +  - compatible: Should contain: "cdns,usb3"
> +  - interrupts: Interrupt specifier. Refer to interrupt bindings.

Do you also comply with USB generic bindings for dr_mode, speed, etc?
i.e. Documentation/devicetree/bindings/usb/generic.txt

If yes it must be mentioned in Optional properties:

> +
> +
> +Example:
> +	cdns3@f3000000 {
> +		compatible = "cdns,usb3";
> +		interrupts = <USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>;
> +		reg = <0xf3000000 0x10000	//memory area for OTG/DRD registers
> +			0xf3010000 0x10000	//memory area for HOST registers
> +			0xf3020000 0x10000>;	//memory area for Device registers
> +	};
> +
> 

cheers,
-roger