From: Mirko Jechow <mirko.jechow@gmx.de>
To: linux@stevetech.au
Cc: mathias.nyman@intel.com, gregkh@linuxfoundation.org,
Shyam-sundar.S-k@amd.com, hurryman2212@gmail.com,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] usb: xhci-pci: Add AMD 600 series to xhci-pci-prom21
Date: Sat, 5 Sep 2026 03:35:32 +0200 [thread overview]
Message-ID: <6e81b0fa-de68-4a83-a152-fe26ea7cc359@gmx.de> (raw)
Tested on an MSI MPG X670E Carbon WiFi (Ryzen 9 7950X3D). The board
exposes two 600 series chipset xHCI functions, 1022:43f7 at 13:00.0 and
15:00.0 -- X670E is built from two Promontory 21 dies.
Without the patch neither function creates an auxiliary device, so
prom21-xhci has nothing to bind to and the sensor is unavailable. With
it applied to 7.2.3, both functions bind xhci-pci-prom21, both auxiliary
devices appear, and both dies report:
prom21_xhci-pci-1300 temp1: +57.4 C
prom21_xhci-pci-1500 temp1: +62.8 C
k10temp Tctl read +58.0 C at the same moment, so the conversion derived
on 800 series silicon looks right here too.
USB is unaffected: the devices behind both controllers enumerate
normally and the log shows no new xHCI errors after they moved to the
glue driver.
Tested-by: Mirko Jechow <mirko.jechow@gmx.de>
next reply other threads:[~2026-09-05 1:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-05 1:35 Mirko Jechow [this message]
-- strict thread matches above, loose matches on Subject: below --
2026-08-20 12:59 [PATCH v2] usb: xhci-pci: Add AMD 600 series to xhci-pci-prom21 Stephen Horvath
2026-08-23 12:23 ` Jihong Min
2026-08-23 12:25 ` Greg Kroah-Hartman
2026-08-23 13:12 ` Jihong Min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6e81b0fa-de68-4a83-a152-fe26ea7cc359@gmx.de \
--to=mirko.jechow@gmx.de \
--cc=Shyam-sundar.S-k@amd.com \
--cc=gregkh@linuxfoundation.org \
--cc=hurryman2212@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@stevetech.au \
--cc=mathias.nyman@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox