Re: [PATCH 1/5] dt-bindings: connector: add fixed-batteries property

[Amit Sunil Dhamne <amitsd@google.com>]

Hi Krzysztof,

On 3/16/25 9:49 AM, Krzysztof Kozlowski wrote:
> On 15/03/2025 01:56, Amit Sunil Dhamne wrote:
>> Hi Krzysztof,
>>
>> On 3/13/25 1:48 AM, Krzysztof Kozlowski wrote:
>>> On Wed, Mar 12, 2025 at 04:42:01PM -0700, Amit Sunil Dhamne wrote:
>>>> Add a new "fixed-batteries" DT property to connector class. This
>>>> property is populated with nodes associated with battery type power
>>>> supplies powering the USB PD connector. This is needed by the Type-C
>>>> Port Manager (TCPM) to query psy properties which are used to feed
>>> What is "psy" in terms of bindings?
>> In terms of bindings this should be a phandle to a device that
>> owns/manages the battery (whose driver will eventually call
>> devm_power_supply_register to register the battery). This could be a
> So a charger? Please rephrain from putting Linux names into the bindings
> description.
Noted, thanks!
>> fuel-guage ("sprd,sc2731-fgu", say), charger ("ti,bq24190") or a
>> platform device ("cw2015") containing "monitored-battery" property to
>> manage the simple battery.
>
>>>> Battery_Status & Battery_Capacity AMS.
>>>>
>>>> Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
>>>> ---
>>>>    Documentation/devicetree/bindings/connector/usb-connector.yaml | 8 ++++++++
>>>>    Documentation/devicetree/bindings/usb/maxim,max33359.yaml      | 1 +
>>>>    2 files changed, 9 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
>>>> index 11e40d225b9f3a0d0aeea7bf764f1c00a719d615..5e15bc060f5a2cfce842f83de738f1e8bae3ce2d 100644
>>>> --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
>>>> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
>>>> @@ -300,6 +300,14 @@ properties:
>>>>        $ref: /schemas/types.yaml#/definitions/uint8-array
>>>>        maxItems: 4
>>>>    
>>>> +  fixed-batteries:
>>>> +    description: Contains references to nodes associated with battery type power
>>>> +      supplies powering the USB PD device. These batteries are fixed type and
>>> What is a "battery type power supply"? If you just link here batteries,
>>> then we have type for it - monitored-battery - but I doubt connector has
>>> direct connection to the battery.
>> Regarding "nodes associated with battery type power supplies", I meant
>> something like a fuel guage or a charger OR platform device with
>> "monitored-battery" that will manage the battery lifecycle. If I use
>> monitored-battery for this, I will be restricted to only querying 1
>> simple battery. Also, I don't mean PD connector device to be a fuel
>> guage or charger that manages a specific battery. It should just be able
>> to query any FG/Chg for the battery status to relay that info to the
>> connector's port partner.
>>
>> The intent of the patchset & this change is for the USB Type C protocol
>> manager module (that consumes these bindings) to be able to get info
> The intent should be rather to accurately describe hardware and maybe
> that's the problem - you focus how to bend it for your drivers.

Acknowledged!

Thanks,

Amit

>
>
> Best regards,
> Krzysztof