Re: [PATCH v2] usb: dwc2: Use generic PHY width in params setup

[Felipe Balbi <felipe.balbi@linux.intel.com>]

[-- Attachment #1: Type: text/plain, Size: 1129 bytes --]


Hi,

Marek Szyprowski <m.szyprowski@samsung.com> writes:
> Hi All,
>
> On 2019-05-31 14:44, Minas Harutyunyan wrote:
>> On 5/9/2019 1:16 PM, Jules Maselbas wrote:
>>> Setting params.phy_utmi_width in dwc2_lowlevel_hw_init() is pointless 
>>> since
>>> it's value will be overwritten by dwc2_init_params().
>>>
>>> This change make sure to take in account the generic PHY width 
>>> information
>>> during paraminitialisation, done in dwc2_set_param_phy_utmi_width().
>>>
>>> By doing so, the phy_utmi_width params can still be overrided by
>>> devicetree specific params and will also be checked against hardware
>>> capabilities.
>>>
>>> Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with 
>>> phy_utmi_width")
>>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>>> Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
>>
>> Acked-by: Minas Harutyunyan <hminas@synopsys.com>
>
> Gentle reminder, Felipe, could you take this to the fixes for v5.2?

darn it, I applied for 'next'. I'll remove from that branch and place it
in fixes. Pull request, hopefully, tomorrow.

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]