* [v6,4/4] arm: arm64: dts: add property snps incr burst type adjustment
@ 2018-07-23 3:06 Pengbo Mu
0 siblings, 0 replies; 5+ messages in thread
From: Pengbo Mu @ 2018-07-23 3:06 UTC (permalink / raw)
To: Felipe Balbi, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Greg Kroah-Hartman
Cc: linux-kernel, linux-usb, devicetree, linux-arm-kernel, ran.wang_1,
pengbo.mu
Property "snps,incr-burst-type-adjustment = <x>, <y>..." for USB3.0
DWC3.When only one value means INCRx mode with fix burst type.
When more than one value, means undefined length burst mode, USB
controller can use the length less than or equal to the largest
enabled burst length.
While enabling undefined length INCR burst type and INCR16 burst type,
get better write performance on NXP Layerscape platforms: around 3%
improvement (from 364MB/s to 375MB/s).
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
---
Changes in v6:
- delete snps,incr-burst-type-adjustment = <1>
Changes in v5:
- add support for ls1021a, ls1012a, ls1046a, ls1088a, ls1021a
- update ls208xa support according to code base change
Changes in v4:
- change definition for this property.
Changes in v3:
- add new property for INCR burst in usb node.
---
arch/arm/boot/dts/ls1021a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 ++
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 ++
6 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c55d479..7c328f3 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -706,6 +706,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
pcie@3400000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 205f0f4..8e3d66f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -482,6 +482,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 1109f22..f826d20 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -643,6 +643,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3000000 {
@@ -652,6 +653,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb3@3100000 {
@@ -661,6 +663,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 136ebfa..9226be8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -604,6 +604,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb@3000000 {
@@ -613,6 +614,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb@3100000 {
@@ -622,6 +624,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 1c6556b..34671ee0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -479,6 +479,7 @@
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
status = "disabled";
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3110000 {
@@ -489,6 +490,7 @@
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
status = "disabled";
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 137ef4d..c0762cc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -754,6 +754,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3110000 {
@@ -764,6 +765,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
ccn@4000000 {
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [v6,4/4] arm: arm64: dts: add property snps incr burst type adjustment
@ 2018-07-23 3:11 Pengbo Mu
0 siblings, 0 replies; 5+ messages in thread
From: Pengbo Mu @ 2018-07-23 3:11 UTC (permalink / raw)
To: Felipe Balbi, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Greg Kroah-Hartman
Cc: linux-kernel, linux-usb, devicetree, linux-arm-kernel, ran.wang_1,
pengbo.mu
Property "snps,incr-burst-type-adjustment = <x>, <y>..." for USB3.0
DWC3.When only one value means INCRx mode with fix burst type.
When more than one value, means undefined length burst mode, USB
controller can use the length less than or equal to the largest
enabled burst length.
While enabling undefined length INCR burst type and INCR16 burst type,
get better write performance on NXP Layerscape platforms: around 3%
improvement (from 364MB/s to 375MB/s).
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
---
Changes in v6:
- delete snps,incr-burst-type-adjustment = <1>
Changes in v5:
- add support for ls1021a, ls1012a, ls1046a, ls1088a, ls1021a
- update ls208xa support according to code base change
Changes in v4:
- change definition for this property.
Changes in v3:
- add new property for INCR burst in usb node.
---
arch/arm/boot/dts/ls1021a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 ++
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 ++
6 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c55d479..7c328f3 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -706,6 +706,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
pcie@3400000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 205f0f4..8e3d66f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -482,6 +482,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 1109f22..f826d20 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -643,6 +643,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3000000 {
@@ -652,6 +653,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb3@3100000 {
@@ -661,6 +663,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 136ebfa..9226be8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -604,6 +604,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb@3000000 {
@@ -613,6 +614,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb@3100000 {
@@ -622,6 +624,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 1c6556b..34671ee0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -479,6 +479,7 @@
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
status = "disabled";
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3110000 {
@@ -489,6 +490,7 @@
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
status = "disabled";
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 137ef4d..c0762cc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -754,6 +754,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3110000 {
@@ -764,6 +765,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
ccn@4000000 {
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [v6,4/4] arm: arm64: dts: add property snps incr burst type adjustment
@ 2018-07-23 10:32 Pengbo Mu
0 siblings, 0 replies; 5+ messages in thread
From: Pengbo Mu @ 2018-07-23 10:32 UTC (permalink / raw)
To: Felipe Balbi, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Greg Kroah-Hartman
Cc: linux-kernel, linux-usb, devicetree, linux-arm-kernel, ran.wang_1,
pengbo.mu
Property "snps,incr-burst-type-adjustment = <x>, <y>..." for USB3.0
DWC3.When only one value means INCRx mode with fix burst type.
When more than one value, means undefined length burst mode, USB
controller can use the length less than or equal to the largest
enabled burst length.
While enabling undefined length INCR burst type and INCR16 burst type,
get better write performance on NXP Layerscape platforms: around 3%
improvement (from 364MB/s to 375MB/s).
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
---
Changes in v6:
- delete snps,incr-burst-type-adjustment = <1>
Changes in v5:
- add support for ls1021a, ls1012a, ls1046a, ls1088a, ls1021a
- update ls208xa support according to code base change
Changes in v4:
- change definition for this property.
Changes in v3:
- add new property for INCR burst in usb node.
---
arch/arm/boot/dts/ls1021a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 ++
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 ++
6 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c55d479..7c328f3 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -706,6 +706,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
pcie@3400000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 205f0f4..8e3d66f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -482,6 +482,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 1109f22..f826d20 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -643,6 +643,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3000000 {
@@ -652,6 +653,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb3@3100000 {
@@ -661,6 +663,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 136ebfa..9226be8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -604,6 +604,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb@3000000 {
@@ -613,6 +614,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb@3100000 {
@@ -622,6 +624,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 1c6556b..34671ee0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -479,6 +479,7 @@
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
status = "disabled";
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3110000 {
@@ -489,6 +490,7 @@
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
status = "disabled";
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 137ef4d..c0762cc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -754,6 +754,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3110000 {
@@ -764,6 +765,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
ccn@4000000 {
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [v6,4/4] arm: arm64: dts: add property snps incr burst type adjustment
@ 2018-07-26 11:10 Felipe Balbi
0 siblings, 0 replies; 5+ messages in thread
From: Felipe Balbi @ 2018-07-26 11:10 UTC (permalink / raw)
To: Pengbo Mu, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Greg Kroah-Hartman
Cc: linux-kernel, linux-usb, devicetree, linux-arm-kernel, ran.wang_1
Pengbo Mu <pengbo.mu@nxp.com> writes:
> Property "snps,incr-burst-type-adjustment = <x>, <y>..." for USB3.0
> DWC3.When only one value means INCRx mode with fix burst type.
> When more than one value, means undefined length burst mode, USB
> controller can use the length less than or equal to the largest
> enabled burst length.
>
> While enabling undefined length INCR burst type and INCR16 burst type,
> get better write performance on NXP Layerscape platforms: around 3%
> improvement (from 364MB/s to 375MB/s).
>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
will this go through arm64 tree or do you need me to pick it up?
^ permalink raw reply [flat|nested] 5+ messages in thread
* [v6,4/4] arm: arm64: dts: add property snps incr burst type adjustment
@ 2018-07-31 2:46 Pengbo Mu
0 siblings, 0 replies; 5+ messages in thread
From: Pengbo Mu @ 2018-07-31 2:46 UTC (permalink / raw)
To: Felipe Balbi, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Greg Kroah-Hartman
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Ran Wang
Felipe Balbi [mailto:balbi@kernel.org] writes:
> > Property "snps,incr-burst-type-adjustment = <x>, <y>..." for USB3.0
> > DWC3.When only one value means INCRx mode with fix burst type.
> > When more than one value, means undefined length burst mode, USB
> > controller can use the length less than or equal to the largest
> > enabled burst length.
> >
> > While enabling undefined length INCR burst type and INCR16 burst type,
> > get better write performance on NXP Layerscape platforms: around 3%
> > improvement (from 364MB/s to 375MB/s).
> >
> > Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> > Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
>
> will this go through arm64 tree or do you need me to pick it up?
Hi ,
I am sorry for I don't understand what you mean .
This patch fixed the dts files of arm32 & arm64 , so I named the title like "arm: arm64: dts ***" .
Is this something wrong ? If yes , pls tell me and I will fix it !
Thanks,
Pengbo
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-07-31 2:46 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-26 11:10 [v6,4/4] arm: arm64: dts: add property snps incr burst type adjustment Felipe Balbi
-- strict thread matches above, loose matches on Subject: below --
2018-07-31 2:46 Pengbo Mu
2018-07-23 10:32 Pengbo Mu
2018-07-23 3:11 Pengbo Mu
2018-07-23 3:06 Pengbo Mu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).