From: Felipe Balbi <balbi@kernel.org>
To: Wesley Cheng <wcheng@codeaurora.org>
Cc: gregkh@linuxfoundation.org, Thinh.Nguyen@synopsys.com,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
jackp@codeaurora.org
Subject: Re: [PATCH v2] usb: dwc3: gadget: Stop EP0 transfers during pullup disable
Date: Mon, 23 Aug 2021 12:34:07 +0300 [thread overview]
Message-ID: <87eeakld0d.fsf@kernel.org> (raw)
In-Reply-To: <20210823092324.1949-1-wcheng@codeaurora.org>
Wesley Cheng <wcheng@codeaurora.org> writes:
> During a USB cable disconnect, or soft disconnect scenario, a pending
> SETUP transaction may not be completed, leading to the following
> error:
>
> dwc3 a600000.dwc3: timed out waiting for SETUP phase
>
> If this occurs, then the entire pullup disable routine is skipped and
> proper cleanup and halting of the controller does not complete.
nit: might want to add a blank line between paragraphs to aid
readability
> Instead of returning an error (which is ignored from the UDC
> perspective), allow the pullup disable to routine to continue, which
^^
remove this?
> will also handle disabling of EP0/1. This will end any active
> transfers as well. Ensure to clear any delayed_status as well, as the
> timeout could happen within the STATUS stage.
>
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> ---
> Changes in v2:
> - Removed calls to dwc3_ep0_end_control_data() and just allow the ep disables
> on EP0 handle the proper ending of transfers.
> - Ensure that delayed_status is cleared, as ran into enumeration issues if the
> SETUP transaction fails on a STATUS stage. Saw delayed_status == TRUE on the
> next connect, which blocked further SETUP transactions to be handled.
>
> drivers/usb/dwc3/gadget.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 5d084542718d..8b6a95c35741 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2430,7 +2430,6 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
> msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
> if (ret == 0) {
> dev_err(dwc->dev, "timed out waiting for SETUP phase\n");
> - return -ETIMEDOUT;
> }
Since the `if' now has a single statement, you should remove the curly braces.
--
balbi
next prev parent reply other threads:[~2021-08-23 9:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-23 9:23 [PATCH v2] usb: dwc3: gadget: Stop EP0 transfers during pullup disable Wesley Cheng
2021-08-23 9:34 ` Felipe Balbi [this message]
2021-08-23 10:59 ` Wesley Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87eeakld0d.fsf@kernel.org \
--to=balbi@kernel.org \
--cc=Thinh.Nguyen@synopsys.com \
--cc=gregkh@linuxfoundation.org \
--cc=jackp@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=wcheng@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).