messages from 2017-12-25 11:23:49 to 2018-01-04 02:29:18 UTC [more...]
[V2,2/5] usb: serial: f81534: add auto RTS direction support
2018-01-04 2:29 UTC
[V2,1/5] usb: serial: f81534: add high baud rate support
2018-01-04 2:29 UTC
usb: do not reset if a low-speed device timed out
2018-01-04 1:29 UTC
USB: UDC core: fix double-free in usb_add_gadget_udc_release
2018-01-04 1:27 UTC
kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-04 0:42 UTC
kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 21:08 UTC
kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 21:04 UTC
USB: cp210x Add new device ID ELV ALC 8xxx
2018-01-03 18:53 UTC
USB: UDC core: fix double-free in usb_add_gadget_udc_release
2018-01-03 17:51 UTC
[-next,2/4] treewide: Use DEVICE_ATTR_RW
2018-01-03 15:16 UTC
[v4,16/16] phy: qcom-qmp: Add support for runtime PM
2018-01-03 11:28 UTC
[v4,15/16] phy: qcom-qusb2: Add support for runtime PM
2018-01-03 11:28 UTC
[v4,14/16] phy: Add USB speed related PHY modes
2018-01-03 11:28 UTC
[v4,13/16] phy: qcom-qmp: Add support for QMP V3 USB3 PHY
2018-01-03 11:28 UTC
[v4,12/16] dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY
2018-01-03 11:28 UTC
[v4,11/16] phy: qcom-qmp: Add register offsets for QMP V3 PHY
2018-01-03 11:28 UTC
[v4,10/16] phy: qcom-qmp: Move register offsets to header file
2018-01-03 11:28 UTC
[v4,09/16] phy: qcom-qusb2: Add support for QUSB2 V2 version
2018-01-03 11:28 UTC
[v4,08/16] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version
2018-01-03 11:28 UTC
[v4,07/16] phy: qcom-qusb2: Add support for different register layouts
2018-01-03 11:28 UTC
[v4,06/16] phy: qcom-qmp: Move SERDES/PCS START after PHY reset
2018-01-03 11:28 UTC
[v4,05/16] phy: qcom-qmp: Fix PHY block reset sequence
2018-01-03 11:28 UTC
[v4,04/16] phy: qcom-qusb2: Power-on PHY before initialization
2018-01-03 11:28 UTC
[v4,03/16] phy: qcom-qmp: Power-on PHY before initialization
2018-01-03 11:28 UTC
[v4,02/16] phy: qcom-qmp: Adapt to clk_bulk_* APIs
2018-01-03 11:28 UTC
[v4,01/16] phy: qcom-qmp: Fix phy pipe clock gating
2018-01-03 11:28 UTC
Fw: kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 9:26 UTC
[next] usbip: vhci: fix spelling mistake: "synchronuously" -> "synchronously"
2018-01-03 9:18 UTC
[v2,6/6] arm64: dts: mt8173: update properties about USB wakeup
2018-01-03 8:53 UTC
[v2,5/6] dt-bindings: usb: mtk-xhci: update USB wakeup properties
2018-01-03 8:53 UTC
[v2,4/6] usb: xhci-mtk: supports remote wakeup for mt2712 with two xHCI IPs
2018-01-03 8:53 UTC
[v2,3/6] dt-bindings: usb: mtu3: update USB wakeup properties
2018-01-03 8:53 UTC
[v2,2/6] usb: mtu3: supports remote wakeup for mt2712 with two SSUSB IPs
2018-01-03 8:53 UTC
[v2,1/6] usb: mtu3: fix error code for getting extcon device
2018-01-03 8:53 UTC
Fw: kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 7:02 UTC
[v5,01/78] xfs: Rename xa_ elements to ail_
2018-01-03 1:01 UTC
USB: usbip: remove useless call in usbip_recv
2018-01-02 23:36 UTC
[v5,03/78] xarray: Add the xa_lock to the radix_tree_root
2018-01-02 22:41 UTC
NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625
2018-01-02 19:49 UTC
[v5,03/78] xarray: Add the xa_lock to the radix_tree_root
2018-01-02 18:01 UTC
tools: usb: usbip_device_driver: prefer 'unsigned int' to 'unsigned'
2018-01-02 17:50 UTC
tools: usb: usbip: fix fd leak in case of 'fread' failure
2018-01-02 17:48 UTC
[v4,7/7] typec: tcpm: Add support for sink PPS related messages
2018-01-02 15:50 UTC
[v4,6/7] typec: tcpm: Represent source supply through power_supply class
2018-01-02 15:50 UTC
[v4,5/7] power: supply: Add 'connected_type' property and supporting code
2018-01-02 15:50 UTC
[v4,4/7] typec: tcpm: Add core support for sink side PPS
2018-01-02 15:50 UTC
[v4,3/7] typec: tcpm: Add SDB header for Status message handling
2018-01-02 15:50 UTC
[v4,2/7] typec: tcpm: Add ADO header for Alert message handling
2018-01-02 15:50 UTC
[v4,1/7] typec: tcpm: Add PD Rev 3.0 definitions to PD header
2018-01-02 15:50 UTC
[2/2] USB: serial: ark3116.c: Move TIOCGSERIAL ioctl case to function
2018-01-02 15:00 UTC
[1/2] USB: serial: ark3116.c: Remove unused TIOCSSERIAL ioctl case
2018-01-02 14:50 UTC
USB: usbip: remove useless call in usbip_recv
2018-01-02 14:02 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2018-01-02 10:13 UTC
[1/2] Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"
2018-01-02 10:06 UTC
[v2] USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
2018-01-02 9:49 UTC
USB: cp2101 Add new device ID ELV ALC 8xxx
2018-01-02 9:46 UTC
[v3,14/16] phy: Add notify_speed callback
2018-01-02 5:42 UTC
[1/3] phy: phy-mtk-tphy: use auto instead of force to bypass utmi signals
2018-01-02 1:41 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2018-01-01 15:59 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2018-01-01 15:53 UTC
`pci_apply_final_quirks()` taking half a second
2018-01-01 15:47 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2018-01-01 13:51 UTC
`pci_apply_final_quirks()` taking half a second
2018-01-01 10:21 UTC
usb: quirks: Add reset-resume quirk for QCA6174 Rome Bluetooth
2018-01-01 9:51 UTC
[2/2] usb: gadget: composite: remove duplicated code in OS desc handling
2018-01-01 2:59 UTC
[1/2] usb: gadget: composite: fix incorrect handling of OS desc requests
2018-01-01 2:59 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-31 21:20 UTC
`pci_apply_final_quirks()` taking half a second
2017-12-31 21:16 UTC
smsc95xx: Delete an error message for a failed memory allocation in smsc95xx_suspend()
2017-12-31 21:11 UTC
usb: quirks: Add reset-resume quirk for QCA6174 Rome Bluetooth
2017-12-31 20:09 UTC
usb: quirks: Add reset-resume quirk for QCA6174 Rome Bluetooth
2017-12-31 17:13 UTC
`pci_apply_final_quirks()` taking half a second
2017-12-31 7:18 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 20:03 UTC
USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 19:26 UTC
USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 18:25 UTC
USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 16:41 UTC
tools: usb: usbip_device_driver: prefer 'unsigned int' to 'unsigned'
2017-12-30 16:11 UTC
tools: usb: usbip: fix fd leak in case of 'fread' failure
2017-12-30 16:01 UTC
USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 15:42 UTC
[v3,03/49] usb: dwc2: Remove version check in GSNPSID
2017-12-30 14:11 UTC
uwb: remove trailing whitespace for coding style
2017-12-29 21:28 UTC
uwb: fix brace coding style issue in drp-ie.c
2017-12-29 20:55 UTC
[v3,03/49] usb: dwc2: Remove version check in GSNPSID
2017-12-29 19:56 UTC
[v3,03/49] usb: dwc2: Remove version check in GSNPSID
2017-12-29 16:59 UTC
`pci_apply_final_quirks()` taking half a second
2017-12-29 16:14 UTC
Fw: kernel BUG at ./include/linux/mm.h:LINE! (3)
2017-12-29 13:24 UTC
NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625
2017-12-29 11:45 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2017-12-29 11:34 UTC
[v2] USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
2017-12-29 9:54 UTC
USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
2017-12-29 9:16 UTC
NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625
2017-12-29 9:02 UTC
[v3,14/16] phy: Add notify_speed callback
2017-12-29 6:28 UTC
[v3,14/16] phy: Add notify_speed callback
2017-12-29 4:24 UTC
USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
2017-12-28 23:47 UTC
`pci_apply_final_quirks()` taking half a second
2017-12-28 21:27 UTC
[2/2] usb: quirks: Add reset-resume quirk for Dell DW1820 QCA Rome Bluetooth
2017-12-28 20:15 UTC
[2/2] usb: quirks: Add reset-resume quirk for Dell DW1820 QCA Rome Bluetooth
2017-12-28 11:59 UTC
[1/3] phy: phy-mtk-tphy: use auto instead of force to bypass utmi signals
2017-12-28 11:14 UTC
[v3,14/16] phy: Add notify_speed callback
2017-12-28 11:04 UTC
USB: cp2101 Add new device ID ELV ALC 8xxx
2017-12-27 21:13 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2017-12-27 20:37 UTC
[2/2] usb: quirks: Add reset-resume quirk for Dell DW1820 QCA Rome Bluetooth
2017-12-27 12:52 UTC
USB: serial: ftdi_sio: add id for Airbus DS P8GR
2017-12-27 10:54 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2017-12-27 10:37 UTC
[v5,06/78] xarray: Change definition of sibling entries
2017-12-27 10:26 UTC
[v5,05/78] xarray: Replace exceptional entries
2017-12-27 10:24 UTC
[v5,03/78] xarray: Add the xa_lock to the radix_tree_root
2017-12-27 10:18 UTC
[v5,03/78] xarray: Add the xa_lock to the radix_tree_root
2017-12-27 10:17 UTC
[v5,03/78] xarray: Add the xa_lock to the radix_tree_root
2017-12-27 3:58 UTC
[v5,03/78] xarray: Add the xa_lock to the radix_tree_root
2017-12-27 3:43 UTC
[v5,06/78] xarray: Change definition of sibling entries
2017-12-27 3:13 UTC
[v5,05/78] xarray: Replace exceptional entries
2017-12-27 3:05 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2017-12-26 21:57 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2017-12-26 21:52 UTC
[2/2] usb: quirks: Add reset-resume quirk for Dell DW1820 QCA Rome Bluetooth
2017-12-26 21:01 UTC
[1/2] Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"
2017-12-26 21:00 UTC
[2/2] usb: musb: remove unused pipe variable
2017-12-26 19:33 UTC
[1/2] usb: musb: remove unused frame variable
2017-12-26 19:33 UTC
[v5,06/78] xarray: Change definition of sibling entries
2017-12-26 17:21 UTC
[v5,05/78] xarray: Replace exceptional entries
2017-12-26 17:15 UTC
[v5,04/78] page cache: Use xa_lock
2017-12-26 16:56 UTC
[v5,03/78] xarray: Add the xa_lock to the radix_tree_root
2017-12-26 16:54 UTC
[v3,49/49] usb: dwc2: pci: Handle error cleanup in probe
2017-12-26 11:34 UTC
[v3,48/49] usb: dwc2: pci: Move devm_kzalloc() before platform_device_add()
2017-12-26 11:34 UTC
[v3,47/49] usb: dwc2: pci: Move usb_phy_generic_register()
2017-12-26 11:34 UTC
[v3,46/49] usb: dwc2: pci: Replace kzalloc() with devm_kzalloc()
2017-12-26 11:34 UTC
[v3,45/49] usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()
2017-12-26 11:33 UTC
[v3,44/49] usb: dwc2: Update bit polling functionality
2017-12-26 11:33 UTC
[v3,43/49] usb: dwc2: Add safety check in setting of descriptor chain pointers
2017-12-26 11:33 UTC
[v3,42/49] usb: dwc2: host: Fix transaction errors in host mode
2017-12-26 11:33 UTC
[v3,41/49] usb: dwc2: Add safety check for STSPHSERCVD intr
2017-12-26 11:32 UTC
[v3,40/49] usb: dwc2: hcd: Fix host channel halt flow
2017-12-26 11:32 UTC
[v3,39/49] usb: dwc2: Change TxFIFO and RxFIFO flushing flow
2017-12-26 11:31 UTC
[v3,38/49] usb: dwc2: Enable power down
2017-12-26 11:31 UTC
[v3,37/49] usb: dwc2: Change hub-control to allow hibernation
2017-12-26 11:31 UTC
[v3,36/49] usb: dwc2: Add dwc2_handle_gpwrdn_intr() handler
2017-12-26 11:31 UTC
[v3,35/49] usb: dwc2: Allow entering hibernation from USB_SUSPEND interrupt
2017-12-26 11:31 UTC
[v3,34/49] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2017-12-26 11:30 UTC
[v3,33/49] usb: dwc2: Add host/device hibernation functions
2017-12-26 11:30 UTC
[v3,32/49] usb: dwc2: Add helper functions for restore routine
2017-12-26 11:30 UTC
[v3,31/49] usb: dwc2: Changes in registers backup/restore functions
2017-12-26 11:30 UTC
[v3,30/49] usb: dwc2: gadget: Add remote_wakeup_allowed flag
2017-12-26 11:30 UTC
[v3,29/49] usb: dwc2: core: Add hibernated flag
2017-12-26 11:29 UTC
[v3,28/49] usb: dwc2: gadget: Fix dwc2_restore_device_registers
2017-12-26 11:29 UTC
[v3,27/49] usb: dwc2: gadget: Moved dtxfsiz backup array place
2017-12-26 11:28 UTC
[v3,26/49] usb: dwc2: Add hibernation field into dwc2_hw_params
2017-12-26 11:28 UTC
[v3,25/49] usb: dwc2: Rename hibernation to partial_power_down
2017-12-26 11:28 UTC
[v3,24/49] usb: dwc2: Enable LPM
2017-12-26 11:28 UTC
[v3,23/49] usb: dwc2: Add core state checking
2017-12-26 11:28 UTC
[v3,22/49] usb: dwc2: Add call_gadget() function call
2017-12-26 11:27 UTC
[v3,21/49] usb: dwc2: gadget: Configure the core to enable LPM
2017-12-26 11:27 UTC
[v3,20/49] usb: dwc2: Enable LPM Transaction Received interrupt
2017-12-26 11:27 UTC
[v3,19/49] usb: dwc2: gadget: LPM interrupt handler
2017-12-26 11:26 UTC
[v3,18/49] usb: dwc2: gadget: Add functionality to exit from LPM L1 state
2017-12-26 11:26 UTC
[v3,17/49] usb: dwc2: Add core parameters for LPM support
2017-12-26 11:25 UTC
[v3,15/49] usb: dwc2: Make function static
2017-12-26 11:25 UTC
[v3,16/49] usb: dwc2: Fix GLPMCFG... definitions
2017-12-26 11:25 UTC
[v3,14/49] usb: dwc2: Delete unused functionality
2017-12-26 11:24 UTC
[v3,13/49] usb: dwc2: Rename function names
2017-12-26 11:24 UTC
[v3,12/49] usb: dwc2: Update GINTSTS_GOUTNAKEFF interrupt handling
2017-12-26 11:24 UTC
[v3,11/49] usb: dwc2: Update dwc2_handle_incomplete_isoc_out() function
2017-12-26 11:24 UTC
[v3,10/49] usb: dwc2: Update dwc2_handle_incomplete_isoc_in() function
2017-12-26 11:23 UTC
[v3,09/49] usb: dwc2: Backup and restore PCGCCTL1 register
2017-12-26 11:23 UTC
[v3,08/49] usb: dwc2: Add dwc2_enable_acg function
2017-12-26 11:23 UTC
[v3,07/49] usb: dwc2: Define Active Clock Gating support bit in GHWCFG4
2017-12-26 11:22 UTC
[v3,06/49] usb: dwc2: Define PCGCCTL1 register in hw.h
2017-12-26 11:22 UTC
[v3,05/49] usb: dwc2: Remove unnecessary debug prints
2017-12-26 11:22 UTC
[v3,04/49] usb: dwc2: Set AHB burst size to INCR
2017-12-26 11:22 UTC
[v3,03/49] usb: dwc2: Remove version check in GSNPSID
2017-12-26 11:22 UTC
[v3,02/49] usb: dwc2: Force mode optimizations
2017-12-26 11:21 UTC
[v3,01/49] usb: dwc2: eliminate irq parameter from dwc2_gadget_init
2017-12-26 11:21 UTC
[v2,44/49] usb: dwc2: Bit polling functionality update
2017-12-25 17:38 UTC
[v2,49/49] usb: dwc2: pci: Handle error cleanup in probe
2017-12-25 11:30 UTC
[v2,48/49] usb: dwc2: pci: Move devm_kzalloc() before platform_device_add()
2017-12-25 11:30 UTC
[v2,47/49] usb: dwc2: pci: Move usb_phy_generic_register()
2017-12-25 11:30 UTC
[v2,46/49] usb: dwc2: pci: Replace kzalloc() with devm_kzalloc()
2017-12-25 11:29 UTC
[v2,45/49] usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()
2017-12-25 11:29 UTC
[v2,44/49] usb: dwc2: Bit polling functionality update
2017-12-25 11:29 UTC
[v2,43/49] usb: dwc2: Add safety check in setting of descriptor chain pointers
2017-12-25 11:29 UTC
[v2,42/49] usb: dwc2: host: Fix transaction errors in host mode
2017-12-25 11:28 UTC
[v2,41/49] usb: dwc2: Add safety check for STSPHSERCVD intr
2017-12-25 11:28 UTC
[v2,40/49] usb: dwc2: hcd: Fix host channel halt flow
2017-12-25 11:28 UTC
[v2,39/49] usb: dwc2: Change TxFIFO and RxFIFO flushing flow
2017-12-25 11:28 UTC
[v2,38/49] usb: dwc2: Enable power down
2017-12-25 11:27 UTC
[v2,37/49] usb: dwc2: Change hub-control to allow hibernation
2017-12-25 11:27 UTC
[v2,36/49] usb: dwc2: Add dwc2_handle_gpwrdn_intr() handler
2017-12-25 11:27 UTC
[v2,35/49] usb: dwc2: Allow entering hibernation from USB_SUSPEND interrupt
2017-12-25 11:26 UTC
[v2,34/49] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2017-12-25 11:26 UTC
[v2,33/49] usb: dwc2: Add host/device hibernation functions
2017-12-25 11:26 UTC
[v2,32/49] usb: dwc2: Add helper functions for restore routine
2017-12-25 11:26 UTC
[v2,31/49] usb: dwc2: Changes in registers backup/restore functions
2017-12-25 11:26 UTC
[v2,30/49] usb: dwc2: gadget: Add remote_wakeup_allowed flag
2017-12-25 11:25 UTC
[v2,29/49] usb: dwc2: core: Add hibernated flag
2017-12-25 11:25 UTC
[v2,28/49] usb: dwc2: gadget: Fix dwc2_restore_device_registers
2017-12-25 11:25 UTC
[v2,27/49] usb: dwc2: gadget: Moved dtxfsiz backup array place
2017-12-25 11:25 UTC
[v2,26/49] usb: dwc2: Add hibernation field into dwc2_hw_params
2017-12-25 11:24 UTC
[v2,25/49] usb: dwc2: Rename hibernation to partial_power_down
2017-12-25 11:24 UTC
[v2,24/49] usb: dwc2: Enable LPM
2017-12-25 11:24 UTC
[v2,23/49] usb: dwc2: Add core state checking
2017-12-25 11:24 UTC
[v2,22/49] usb: dwc2: Add call_gadget() function call
2017-12-25 11:23 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).