messages from 2017-12-29 20:55:42 to 2018-01-09 08:42:59 UTC [more...]
[10/15] usb: dwc3: gadget: Set maxpacket size for ep0 IN
2018-01-09 8:42 UTC
usb: f_fs: Prevent gadget unbind if it is already unbound
2018-01-09 7:00 UTC
[14/15] usb: dwc3: Add disabling of start_transfer failure quirk
2018-01-09 4:16 UTC
[08/15] usb: dwc3: Make RX/TX threshold configurable
2018-01-09 4:12 UTC
[09/15] usb: dwc3: Check for ESS TX/RX threshold config
2018-01-08 23:43 UTC
[12/15] usb: dwc3: Dump LSP and BMU debug info
2018-01-08 23:40 UTC
[03/15] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
2018-01-08 23:22 UTC
[01/15] usb: dwc3: Device SoftReset PHY synchonization delay
2018-01-08 23:22 UTC
[10/15] usb: dwc3: gadget: Set maxpacket size for ep0 IN
2018-01-08 23:14 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 22:16 UTC
The usbmon triggers a BUG in ./include/linux/mm.h
2018-01-08 21:46 UTC
[v2,1/2] USB: serial: ark3116: Remove unused TIOCSSERIAL ioctl case
2018-01-08 21:45 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 21:44 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 21:31 UTC
Fw: kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-08 21:25 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 20:40 UTC
dvb usb issues since kernel 4.9
2018-01-08 19:51 UTC
phy: work around 'phys' references to usb-phy devices
2018-01-08 18:32 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 17:35 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 17:15 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 16:31 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 16:26 UTC
dvb usb issues since kernel 4.9
2018-01-08 16:10 UTC
[GIT,PULL] USB: changes for v4.16 merge window
2018-01-08 15:54 UTC
[v2,1/2] USB: serial: ark3116: Remove unused TIOCSSERIAL ioctl case
2018-01-08 15:28 UTC
[GIT,PULL] USB: changes for v4.16 merge window
2018-01-08 13:17 UTC
phy: work around 'phys' references to usb-phy devices
2018-01-08 13:01 UTC
[v4,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-08 12:30 UTC
[v4,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-08 12:30 UTC
[v4,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-08 12:30 UTC
[v3,03/49] usb: dwc2: Remove version check in GSNPSID
2018-01-08 12:13 UTC
[12/15] usb: dwc3: Dump LSP and BMU debug info
2018-01-08 12:06 UTC
[10/15] usb: dwc3: gadget: Set maxpacket size for ep0 IN
2018-01-08 12:05 UTC
[09/15] usb: dwc3: Check for ESS TX/RX threshold config
2018-01-08 12:04 UTC
[03/15] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
2018-01-08 12:01 UTC
[01/15] usb: dwc3: Device SoftReset PHY synchonization delay
2018-01-08 11:59 UTC
usb: dwc3: gadget: decrease the queued_requests in removal
2018-01-08 11:52 UTC
[GIT,PULL] USB: changes for v4.16 merge window
2018-01-08 11:48 UTC
usb:dwc3:fix access poisoned list_head in dwc3_gadget_giveback
2018-01-08 11:46 UTC
Revert "ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells"
2018-01-08 11:22 UTC
[v2,1/2] USB: serial: ark3116: Remove unused TIOCSSERIAL ioctl case
2018-01-08 10:33 UTC
dvb usb issues since kernel 4.9
2018-01-08 9:43 UTC
[v3,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-08 7:57 UTC
[v3,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-08 7:52 UTC
[v3,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-08 7:37 UTC
[v3,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-08 7:37 UTC
Fw: kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-08 5:22 UTC
[v4,14/16] phy: Add USB speed related PHY modes
2018-01-08 4:46 UTC
USB: ohci: da8xx: remove clk con_id
2018-01-08 1:52 UTC
USB: musb: da8xx: remove clock con_id
2018-01-08 1:52 UTC
[3/3] ARM: da8xx: remove con_id from USB clocks
2018-01-07 3:19 UTC
[2/3] USB: ohci: da8xx: remove clk con_id
2018-01-07 3:19 UTC
[1/3] USB: musb: da8xx: remove clock con_id
2018-01-07 3:19 UTC
[v2,2/2] USB: serial: ark3116: Move TIOCGSERIAL ioctl case to function
2018-01-06 17:15 UTC
[v2,1/2] USB: serial: ark3116: Remove unused TIOCSSERIAL ioctl case
2018-01-06 17:14 UTC
[1/2] dt-bindings: usb-xhci: add usb3-resume-missing-cas property
2018-01-06 14:09 UTC
USB: ohci: da8xx: remove clk con_id
2018-01-06 1:53 UTC
USB: musb: da8xx: remove clock con_id
2018-01-06 1:50 UTC
[v3,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 22:46 UTC
[v3,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 22:46 UTC
[v3,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 22:46 UTC
[13/15] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-01-05 22:06 UTC
[13/15] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-01-05 21:43 UTC
[v2,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 20:26 UTC
[v2,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 20:18 UTC
[v2,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 20:17 UTC
[15/15] usb: dwc3: Add workaround for isoc start transfer failure
2018-01-05 20:17 UTC
[14/15] usb: dwc3: Add disabling of start_transfer failure quirk
2018-01-05 20:16 UTC
[13/15] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-01-05 20:16 UTC
[12/15] usb: dwc3: Dump LSP and BMU debug info
2018-01-05 20:15 UTC
[11/15] usb: dwc3: ep0: Reset TRB counter for ep0 IN
2018-01-05 20:15 UTC
[10/15] usb: dwc3: gadget: Set maxpacket size for ep0 IN
2018-01-05 20:15 UTC
[09/15] usb: dwc3: Check for ESS TX/RX threshold config
2018-01-05 20:14 UTC
[08/15] usb: dwc3: Make RX/TX threshold configurable
2018-01-05 20:14 UTC
[07/15] usb: dwc3: Add DWC_usb31 GTXTHRCFG reg fields
2018-01-05 20:14 UTC
[06/15] usb: dwc3: gadget: Check IP revision for GRXTHRCFG
2018-01-05 20:14 UTC
[05/15] usb: dwc3: Add DWC_usb31 GRXTHRCFG bit fields
2018-01-05 20:14 UTC
[04/15] usb: dwc3: Check IP revision for GTXFIFOSIZ
2018-01-05 20:13 UTC
[03/15] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
2018-01-05 20:13 UTC
[02/15] usb: core: urb: Check SSP isoc ep comp descriptor
2018-01-05 20:13 UTC
[01/15] usb: dwc3: Device SoftReset PHY synchonization delay
2018-01-05 20:13 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2018-01-05 19:44 UTC
[v2,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 18:46 UTC
[v2,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 18:46 UTC
[v2,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 18:46 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2018-01-05 18:41 UTC
[v2,5/6] dt-bindings: usb: mtk-xhci: update USB wakeup properties
2018-01-05 18:39 UTC
[v2,3/6] dt-bindings: usb: mtu3: update USB wakeup properties
2018-01-05 17:21 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 13:24 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 13:03 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 12:54 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 12:42 UTC
[v4,14/16] phy: Add USB speed related PHY modes
2018-01-05 11:01 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 9:53 UTC
[4/4] xHCI: Handle dwc3 erratum on USB3 HW LPM feature
2018-01-05 9:40 UTC
[3/4] arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
2018-01-05 9:40 UTC
[2/4] arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
2018-01-05 9:40 UTC
[1/4] arm: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
2018-01-05 9:40 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2018-01-05 9:10 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 9:03 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 8:53 UTC
[2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 8:48 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2018-01-05 2:09 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-04 20:01 UTC
[2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-04 20:01 UTC
[1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-04 20:01 UTC
[next] usbip: vhci: fix spelling mistake: "synchronuously" -> "synchronously"
2018-01-04 19:08 UTC
[v2] usb: do not reset if a low-speed or full-speed device timed out
2018-01-04 18:43 UTC
usb: do not reset if a low-speed device timed out
2018-01-04 17:21 UTC
usb: do not reset if a low-speed device timed out
2018-01-04 16:57 UTC
[v4,3/3] usb: host: Implement workaround for Erratum A-009668
2018-01-04 14:58 UTC
USB: cp210x Add new device ID ELV ALC 8xxx
2018-01-04 14:55 UTC
[v4,2/3] usb: host: Implement workaround for Erratum A-009611
2018-01-04 14:32 UTC
[v4,1/3] usb: host: Implement workaround for Erratum A-007463
2018-01-04 13:38 UTC
[v1,1/1] usb: xhci: do not create and register shared_hcd when USB3.0 is disabled
2018-01-04 5:17 UTC
[V2,5/5] usb: serial: f81534: fix tx error on some baud rate
2018-01-04 2:29 UTC
[V2,4/5] usb: serial: f81534: add H/W disable port support
2018-01-04 2:29 UTC
[V2,3/5] usb: serial: f81534: add output pin control
2018-01-04 2:29 UTC
[V2,2/5] usb: serial: f81534: add auto RTS direction support
2018-01-04 2:29 UTC
[V2,1/5] usb: serial: f81534: add high baud rate support
2018-01-04 2:29 UTC
usb: do not reset if a low-speed device timed out
2018-01-04 1:29 UTC
USB: UDC core: fix double-free in usb_add_gadget_udc_release
2018-01-04 1:27 UTC
kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-04 0:42 UTC
kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 21:08 UTC
kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 21:04 UTC
USB: cp210x Add new device ID ELV ALC 8xxx
2018-01-03 18:53 UTC
USB: UDC core: fix double-free in usb_add_gadget_udc_release
2018-01-03 17:51 UTC
[-next,2/4] treewide: Use DEVICE_ATTR_RW
2018-01-03 15:16 UTC
[v4,16/16] phy: qcom-qmp: Add support for runtime PM
2018-01-03 11:28 UTC
[v4,15/16] phy: qcom-qusb2: Add support for runtime PM
2018-01-03 11:28 UTC
[v4,14/16] phy: Add USB speed related PHY modes
2018-01-03 11:28 UTC
[v4,13/16] phy: qcom-qmp: Add support for QMP V3 USB3 PHY
2018-01-03 11:28 UTC
[v4,12/16] dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY
2018-01-03 11:28 UTC
[v4,11/16] phy: qcom-qmp: Add register offsets for QMP V3 PHY
2018-01-03 11:28 UTC
[v4,10/16] phy: qcom-qmp: Move register offsets to header file
2018-01-03 11:28 UTC
[v4,09/16] phy: qcom-qusb2: Add support for QUSB2 V2 version
2018-01-03 11:28 UTC
[v4,08/16] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version
2018-01-03 11:28 UTC
[v4,07/16] phy: qcom-qusb2: Add support for different register layouts
2018-01-03 11:28 UTC
[v4,06/16] phy: qcom-qmp: Move SERDES/PCS START after PHY reset
2018-01-03 11:28 UTC
[v4,05/16] phy: qcom-qmp: Fix PHY block reset sequence
2018-01-03 11:28 UTC
[v4,04/16] phy: qcom-qusb2: Power-on PHY before initialization
2018-01-03 11:28 UTC
[v4,03/16] phy: qcom-qmp: Power-on PHY before initialization
2018-01-03 11:28 UTC
[v4,02/16] phy: qcom-qmp: Adapt to clk_bulk_* APIs
2018-01-03 11:28 UTC
[v4,01/16] phy: qcom-qmp: Fix phy pipe clock gating
2018-01-03 11:28 UTC
Fw: kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 9:26 UTC
[next] usbip: vhci: fix spelling mistake: "synchronuously" -> "synchronously"
2018-01-03 9:18 UTC
[v2,6/6] arm64: dts: mt8173: update properties about USB wakeup
2018-01-03 8:53 UTC
[v2,5/6] dt-bindings: usb: mtk-xhci: update USB wakeup properties
2018-01-03 8:53 UTC
[v2,4/6] usb: xhci-mtk: supports remote wakeup for mt2712 with two xHCI IPs
2018-01-03 8:53 UTC
[v2,3/6] dt-bindings: usb: mtu3: update USB wakeup properties
2018-01-03 8:53 UTC
[v2,2/6] usb: mtu3: supports remote wakeup for mt2712 with two SSUSB IPs
2018-01-03 8:53 UTC
[v2,1/6] usb: mtu3: fix error code for getting extcon device
2018-01-03 8:53 UTC
Fw: kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 7:02 UTC
[v5,01/78] xfs: Rename xa_ elements to ail_
2018-01-03 1:01 UTC
USB: usbip: remove useless call in usbip_recv
2018-01-02 23:36 UTC
[v5,03/78] xarray: Add the xa_lock to the radix_tree_root
2018-01-02 22:41 UTC
NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625
2018-01-02 19:49 UTC
[v5,03/78] xarray: Add the xa_lock to the radix_tree_root
2018-01-02 18:01 UTC
tools: usb: usbip_device_driver: prefer 'unsigned int' to 'unsigned'
2018-01-02 17:50 UTC
tools: usb: usbip: fix fd leak in case of 'fread' failure
2018-01-02 17:48 UTC
[v4,7/7] typec: tcpm: Add support for sink PPS related messages
2018-01-02 15:50 UTC
[v4,6/7] typec: tcpm: Represent source supply through power_supply class
2018-01-02 15:50 UTC
[v4,5/7] power: supply: Add 'connected_type' property and supporting code
2018-01-02 15:50 UTC
[v4,4/7] typec: tcpm: Add core support for sink side PPS
2018-01-02 15:50 UTC
[v4,3/7] typec: tcpm: Add SDB header for Status message handling
2018-01-02 15:50 UTC
[v4,2/7] typec: tcpm: Add ADO header for Alert message handling
2018-01-02 15:50 UTC
[v4,1/7] typec: tcpm: Add PD Rev 3.0 definitions to PD header
2018-01-02 15:50 UTC
[2/2] USB: serial: ark3116.c: Move TIOCGSERIAL ioctl case to function
2018-01-02 15:00 UTC
[1/2] USB: serial: ark3116.c: Remove unused TIOCSSERIAL ioctl case
2018-01-02 14:50 UTC
USB: usbip: remove useless call in usbip_recv
2018-01-02 14:02 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2018-01-02 10:13 UTC
[1/2] Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"
2018-01-02 10:06 UTC
[v2] USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
2018-01-02 9:49 UTC
USB: cp2101 Add new device ID ELV ALC 8xxx
2018-01-02 9:46 UTC
[v3,14/16] phy: Add notify_speed callback
2018-01-02 5:42 UTC
[1/3] phy: phy-mtk-tphy: use auto instead of force to bypass utmi signals
2018-01-02 1:41 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2018-01-01 15:59 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2018-01-01 15:53 UTC
`pci_apply_final_quirks()` taking half a second
2018-01-01 15:47 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2018-01-01 13:51 UTC
`pci_apply_final_quirks()` taking half a second
2018-01-01 10:21 UTC
usb: quirks: Add reset-resume quirk for QCA6174 Rome Bluetooth
2018-01-01 9:51 UTC
[2/2] usb: gadget: composite: remove duplicated code in OS desc handling
2018-01-01 2:59 UTC
[1/2] usb: gadget: composite: fix incorrect handling of OS desc requests
2018-01-01 2:59 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-31 21:20 UTC
`pci_apply_final_quirks()` taking half a second
2017-12-31 21:16 UTC
smsc95xx: Delete an error message for a failed memory allocation in smsc95xx_suspend()
2017-12-31 21:11 UTC
usb: quirks: Add reset-resume quirk for QCA6174 Rome Bluetooth
2017-12-31 20:09 UTC
usb: quirks: Add reset-resume quirk for QCA6174 Rome Bluetooth
2017-12-31 17:13 UTC
`pci_apply_final_quirks()` taking half a second
2017-12-31 7:18 UTC
[v2] USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 20:03 UTC
USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 19:26 UTC
USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 18:25 UTC
USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 16:41 UTC
tools: usb: usbip_device_driver: prefer 'unsigned int' to 'unsigned'
2017-12-30 16:11 UTC
tools: usb: usbip: fix fd leak in case of 'fread' failure
2017-12-30 16:01 UTC
USB: host: Use zeroing memory allocator rather than allocator/memset
2017-12-30 15:42 UTC
[v3,03/49] usb: dwc2: Remove version check in GSNPSID
2017-12-30 14:11 UTC
uwb: remove trailing whitespace for coding style
2017-12-29 21:28 UTC
uwb: fix brace coding style issue in drp-ie.c
2017-12-29 20:55 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).