messages from 2018-01-03 11:28:37 to 2018-01-10 14:13:02 UTC [more...]
usb: dwc3: core: Don't try to get PHYs during suspend/resume
2018-01-10 14:13 UTC
usb: dwc3: core: Don't try to get PHYs during suspend/resume
2018-01-10 14:04 UTC
usb: dwc3: core: Don't try to get PHYs during suspend/resume
2018-01-10 13:56 UTC
usb: dwc3: core: Don't try to get PHYs during suspend/resume
2018-01-10 13:33 UTC
usb: dwc3: core: Don't try to get PHYs during suspend/resume
2018-01-10 13:24 UTC
usb: dwc3: core: Don't try to get PHYs during suspend/resume
2018-01-10 13:11 UTC
usb: dwc2: Fix endless deferral probe
2018-01-10 12:15 UTC
Help needed debugging Motorola Solutions TETRA PEI interface
2018-01-10 12:00 UTC
[GIT,PULL] usb: chipidea: updates for v4.16-rc1
2018-01-10 11:54 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-10 9:45 UTC
[V2,1/5] usb: serial: f81534: add high baud rate support
2018-01-10 9:27 UTC
[v2] PM / runtime: Rework pm_runtime_force_suspend/resume()
2018-01-10 9:26 UTC
[V2,1/5] usb: serial: f81534: add high baud rate support
2018-01-10 9:16 UTC
[V2,5/5] usb: serial: f81534: fix tx error on some baud rate
2018-01-10 8:50 UTC
[V2,1/5] usb: serial: f81534: add high baud rate support
2018-01-10 8:49 UTC
[v4,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-10 8:31 UTC
[v4,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-10 8:31 UTC
[v4,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-10 8:26 UTC
[V2] USBIP: return correct port ENABLE status
2018-01-10 8:12 UTC
uas: Unblock scsi-requests on failure to alloc streams in post_reset
2018-01-10 7:13 UTC
USB TYPEC: RT1711H Type-C Chip Driver
2018-01-10 6:59 UTC
[V2,5/5] usb: serial: f81534: fix tx error on some baud rate
2018-01-10 5:42 UTC
[V2,1/5] usb: serial: f81534: add high baud rate support
2018-01-10 5:30 UTC
[2/2] usb: xhci: Remove ep_trb from finish_td()
2018-01-10 4:59 UTC
[1/2] usb: xhci: Remove ep_trb from xhci_cleanup_halted_endpoint()
2018-01-10 4:59 UTC
dvb usb issues since kernel 4.9
2018-01-10 3:02 UTC
[GIT,PULL] usb: chipidea: updates for v4.16-rc1
2018-01-10 1:19 UTC
[08/15] usb: dwc3: Make RX/TX threshold configurable
2018-01-09 23:54 UTC
[10/15] usb: dwc3: gadget: Set maxpacket size for ep0 IN
2018-01-09 23:47 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-09 21:48 UTC
usb: dwc2: Fix endless deferral probe
2018-01-09 21:33 UTC
dvb usb issues since kernel 4.9
2018-01-09 21:26 UTC
usb: dwc2: Fix endless deferral probe
2018-01-09 19:28 UTC
Documentation: usb: fix typo in UVC gadgetfs config command
2018-01-09 19:27 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-09 18:58 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-09 17:57 UTC
dvb usb issues since kernel 4.9
2018-01-09 17:55 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-09 17:48 UTC
[V2] USBIP: return correct port ENABLE status
2018-01-09 17:44 UTC
dvb usb issues since kernel 4.9
2018-01-09 17:42 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-09 17:27 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-09 16:51 UTC
[v2] PM / runtime: Rework pm_runtime_force_suspend/resume()
2018-01-09 16:28 UTC
USB: core: Fix misuse of USB_DT_USB_SSP_CAP_SIZE()
2018-01-09 15:06 UTC
The usbmon triggers a BUG in ./include/linux/mm.h
2018-01-09 15:03 UTC
usb: xhci: Clean up error code in xhci_dbc_tty_register_device()
2018-01-09 12:55 UTC
[v2,2/2] USB: serial: ark3116: Move TIOCGSERIAL ioctl case to function
2018-01-09 11:57 UTC
[v2,1/2] USB: serial: ark3116: Remove unused TIOCSSERIAL ioctl case
2018-01-09 11:55 UTC
[V2,5/5] usb: serial: f81534: fix tx error on some baud rate
2018-01-09 11:32 UTC
[V2,4/5] usb: serial: f81534: add H/W disable port support
2018-01-09 11:29 UTC
[V2,3/5] usb: serial: f81534: add output pin control
2018-01-09 11:19 UTC
[V2,2/5] usb: serial: f81534: add auto RTS direction support
2018-01-09 11:14 UTC
[V2,1/5] usb: serial: f81534: add high baud rate support
2018-01-09 11:08 UTC
usb: xhci: Clean up error code in xhci_dbc_tty_register_device()
2018-01-09 9:41 UTC
[usb_add_gadget_udc_release] BUG: KASAN: double-free or invalid-free in (null)
2018-01-09 9:31 UTC
[GIT,PULL] USB: changes for v4.16 merge window
2018-01-09 9:04 UTC
[v4,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-09 9:01 UTC
[GIT,PULL] USB: changes for v4.16 merge window
2018-01-09 8:47 UTC
[14/15] usb: dwc3: Add disabling of start_transfer failure quirk
2018-01-09 8:45 UTC
[10/15] usb: dwc3: gadget: Set maxpacket size for ep0 IN
2018-01-09 8:42 UTC
usb: f_fs: Prevent gadget unbind if it is already unbound
2018-01-09 7:00 UTC
[14/15] usb: dwc3: Add disabling of start_transfer failure quirk
2018-01-09 4:16 UTC
[08/15] usb: dwc3: Make RX/TX threshold configurable
2018-01-09 4:12 UTC
[09/15] usb: dwc3: Check for ESS TX/RX threshold config
2018-01-08 23:43 UTC
[12/15] usb: dwc3: Dump LSP and BMU debug info
2018-01-08 23:40 UTC
[03/15] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
2018-01-08 23:22 UTC
[01/15] usb: dwc3: Device SoftReset PHY synchonization delay
2018-01-08 23:22 UTC
[10/15] usb: dwc3: gadget: Set maxpacket size for ep0 IN
2018-01-08 23:14 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 22:16 UTC
The usbmon triggers a BUG in ./include/linux/mm.h
2018-01-08 21:46 UTC
[v2,1/2] USB: serial: ark3116: Remove unused TIOCSSERIAL ioctl case
2018-01-08 21:45 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 21:44 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 21:31 UTC
Fw: kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-08 21:25 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 20:40 UTC
dvb usb issues since kernel 4.9
2018-01-08 19:51 UTC
phy: work around 'phys' references to usb-phy devices
2018-01-08 18:32 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 17:35 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 17:15 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 16:31 UTC
Aw: Re: dvb usb issues since kernel 4.9
2018-01-08 16:26 UTC
dvb usb issues since kernel 4.9
2018-01-08 16:10 UTC
[GIT,PULL] USB: changes for v4.16 merge window
2018-01-08 15:54 UTC
[v2,1/2] USB: serial: ark3116: Remove unused TIOCSSERIAL ioctl case
2018-01-08 15:28 UTC
[GIT,PULL] USB: changes for v4.16 merge window
2018-01-08 13:17 UTC
phy: work around 'phys' references to usb-phy devices
2018-01-08 13:01 UTC
[v4,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-08 12:30 UTC
[v4,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-08 12:30 UTC
[v4,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-08 12:30 UTC
[v3,03/49] usb: dwc2: Remove version check in GSNPSID
2018-01-08 12:13 UTC
[12/15] usb: dwc3: Dump LSP and BMU debug info
2018-01-08 12:06 UTC
[10/15] usb: dwc3: gadget: Set maxpacket size for ep0 IN
2018-01-08 12:05 UTC
[09/15] usb: dwc3: Check for ESS TX/RX threshold config
2018-01-08 12:04 UTC
[03/15] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
2018-01-08 12:01 UTC
[01/15] usb: dwc3: Device SoftReset PHY synchonization delay
2018-01-08 11:59 UTC
usb: dwc3: gadget: decrease the queued_requests in removal
2018-01-08 11:52 UTC
[GIT,PULL] USB: changes for v4.16 merge window
2018-01-08 11:48 UTC
usb:dwc3:fix access poisoned list_head in dwc3_gadget_giveback
2018-01-08 11:46 UTC
Revert "ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells"
2018-01-08 11:22 UTC
[v2,1/2] USB: serial: ark3116: Remove unused TIOCSSERIAL ioctl case
2018-01-08 10:33 UTC
dvb usb issues since kernel 4.9
2018-01-08 9:43 UTC
[v3,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-08 7:57 UTC
[v3,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-08 7:52 UTC
[v3,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-08 7:37 UTC
[v3,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-08 7:37 UTC
Fw: kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-08 5:22 UTC
[v4,14/16] phy: Add USB speed related PHY modes
2018-01-08 4:46 UTC
USB: ohci: da8xx: remove clk con_id
2018-01-08 1:52 UTC
USB: musb: da8xx: remove clock con_id
2018-01-08 1:52 UTC
[3/3] ARM: da8xx: remove con_id from USB clocks
2018-01-07 3:19 UTC
[2/3] USB: ohci: da8xx: remove clk con_id
2018-01-07 3:19 UTC
[1/3] USB: musb: da8xx: remove clock con_id
2018-01-07 3:19 UTC
[v2,2/2] USB: serial: ark3116: Move TIOCGSERIAL ioctl case to function
2018-01-06 17:15 UTC
[v2,1/2] USB: serial: ark3116: Remove unused TIOCSSERIAL ioctl case
2018-01-06 17:14 UTC
[1/2] dt-bindings: usb-xhci: add usb3-resume-missing-cas property
2018-01-06 14:09 UTC
USB: ohci: da8xx: remove clk con_id
2018-01-06 1:53 UTC
USB: musb: da8xx: remove clock con_id
2018-01-06 1:50 UTC
[v3,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 22:46 UTC
[v3,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 22:46 UTC
[v3,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 22:46 UTC
[13/15] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-01-05 22:06 UTC
[13/15] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-01-05 21:43 UTC
[v2,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 20:26 UTC
[v2,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 20:18 UTC
[v2,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 20:17 UTC
[15/15] usb: dwc3: Add workaround for isoc start transfer failure
2018-01-05 20:17 UTC
[14/15] usb: dwc3: Add disabling of start_transfer failure quirk
2018-01-05 20:16 UTC
[13/15] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-01-05 20:16 UTC
[12/15] usb: dwc3: Dump LSP and BMU debug info
2018-01-05 20:15 UTC
[11/15] usb: dwc3: ep0: Reset TRB counter for ep0 IN
2018-01-05 20:15 UTC
[10/15] usb: dwc3: gadget: Set maxpacket size for ep0 IN
2018-01-05 20:15 UTC
[09/15] usb: dwc3: Check for ESS TX/RX threshold config
2018-01-05 20:14 UTC
[08/15] usb: dwc3: Make RX/TX threshold configurable
2018-01-05 20:14 UTC
[07/15] usb: dwc3: Add DWC_usb31 GTXTHRCFG reg fields
2018-01-05 20:14 UTC
[06/15] usb: dwc3: gadget: Check IP revision for GRXTHRCFG
2018-01-05 20:14 UTC
[05/15] usb: dwc3: Add DWC_usb31 GRXTHRCFG bit fields
2018-01-05 20:14 UTC
[04/15] usb: dwc3: Check IP revision for GTXFIFOSIZ
2018-01-05 20:13 UTC
[03/15] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
2018-01-05 20:13 UTC
[02/15] usb: core: urb: Check SSP isoc ep comp descriptor
2018-01-05 20:13 UTC
[01/15] usb: dwc3: Device SoftReset PHY synchonization delay
2018-01-05 20:13 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2018-01-05 19:44 UTC
[v2,3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 18:46 UTC
[v2,2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 18:46 UTC
[v2,1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 18:46 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2018-01-05 18:41 UTC
[v2,5/6] dt-bindings: usb: mtk-xhci: update USB wakeup properties
2018-01-05 18:39 UTC
[v2,3/6] dt-bindings: usb: mtu3: update USB wakeup properties
2018-01-05 17:21 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 13:24 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 13:03 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 12:54 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 12:42 UTC
[v4,14/16] phy: Add USB speed related PHY modes
2018-01-05 11:01 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 9:53 UTC
[4/4] xHCI: Handle dwc3 erratum on USB3 HW LPM feature
2018-01-05 9:40 UTC
[3/4] arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
2018-01-05 9:40 UTC
[2/4] arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
2018-01-05 9:40 UTC
[1/4] arm: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
2018-01-05 9:40 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2018-01-05 9:10 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 9:03 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-05 8:53 UTC
[2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-05 8:48 UTC
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
2018-01-05 2:09 UTC
[3/3] ARM: dts: r7s72100: add USB device to device tree
2018-01-04 20:01 UTC
[2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
2018-01-04 20:01 UTC
[1/3] usb: renesas_usbhs: Add support for RZ/A1
2018-01-04 20:01 UTC
[next] usbip: vhci: fix spelling mistake: "synchronuously" -> "synchronously"
2018-01-04 19:08 UTC
[v2] usb: do not reset if a low-speed or full-speed device timed out
2018-01-04 18:43 UTC
usb: do not reset if a low-speed device timed out
2018-01-04 17:21 UTC
usb: do not reset if a low-speed device timed out
2018-01-04 16:57 UTC
[v4,3/3] usb: host: Implement workaround for Erratum A-009668
2018-01-04 14:58 UTC
USB: cp210x Add new device ID ELV ALC 8xxx
2018-01-04 14:55 UTC
[v4,2/3] usb: host: Implement workaround for Erratum A-009611
2018-01-04 14:32 UTC
[v4,1/3] usb: host: Implement workaround for Erratum A-007463
2018-01-04 13:38 UTC
[v1,1/1] usb: xhci: do not create and register shared_hcd when USB3.0 is disabled
2018-01-04 5:17 UTC
[V2,5/5] usb: serial: f81534: fix tx error on some baud rate
2018-01-04 2:29 UTC
[V2,4/5] usb: serial: f81534: add H/W disable port support
2018-01-04 2:29 UTC
[V2,3/5] usb: serial: f81534: add output pin control
2018-01-04 2:29 UTC
[V2,2/5] usb: serial: f81534: add auto RTS direction support
2018-01-04 2:29 UTC
[V2,1/5] usb: serial: f81534: add high baud rate support
2018-01-04 2:29 UTC
usb: do not reset if a low-speed device timed out
2018-01-04 1:29 UTC
USB: UDC core: fix double-free in usb_add_gadget_udc_release
2018-01-04 1:27 UTC
kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-04 0:42 UTC
kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 21:08 UTC
kernel BUG at ./include/linux/mm.h:LINE! (3)
2018-01-03 21:04 UTC
USB: cp210x Add new device ID ELV ALC 8xxx
2018-01-03 18:53 UTC
USB: UDC core: fix double-free in usb_add_gadget_udc_release
2018-01-03 17:51 UTC
[-next,2/4] treewide: Use DEVICE_ATTR_RW
2018-01-03 15:16 UTC
[v4,16/16] phy: qcom-qmp: Add support for runtime PM
2018-01-03 11:28 UTC
[v4,15/16] phy: qcom-qusb2: Add support for runtime PM
2018-01-03 11:28 UTC
[v4,14/16] phy: Add USB speed related PHY modes
2018-01-03 11:28 UTC
[v4,13/16] phy: qcom-qmp: Add support for QMP V3 USB3 PHY
2018-01-03 11:28 UTC
[v4,12/16] dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY
2018-01-03 11:28 UTC
[v4,11/16] phy: qcom-qmp: Add register offsets for QMP V3 PHY
2018-01-03 11:28 UTC
[v4,10/16] phy: qcom-qmp: Move register offsets to header file
2018-01-03 11:28 UTC
[v4,09/16] phy: qcom-qusb2: Add support for QUSB2 V2 version
2018-01-03 11:28 UTC
[v4,08/16] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version
2018-01-03 11:28 UTC
[v4,07/16] phy: qcom-qusb2: Add support for different register layouts
2018-01-03 11:28 UTC
[v4,06/16] phy: qcom-qmp: Move SERDES/PCS START after PHY reset
2018-01-03 11:28 UTC
[v4,05/16] phy: qcom-qmp: Fix PHY block reset sequence
2018-01-03 11:28 UTC
[v4,04/16] phy: qcom-qusb2: Power-on PHY before initialization
2018-01-03 11:28 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).