messages from 2018-01-24 02:06:31 to 2018-02-02 15:25:00 UTC [more...]
[V2] ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
2018-02-02 15:25 UTC
[1/1] usb: host: ehci: always enable interrupt for qtd completion at test mode
2018-02-02 15:20 UTC
[4.9] usbip: vhci_hcd: clear just the USB_PORT_STAT_POWER bit
2018-02-02 10:21 UTC
[net,2/2] r8152: set rx mode early when linking on
2018-02-02 8:43 UTC
[net,1/2] r8152: fix wrong checksum status for received IPv4 packets
2018-02-02 8:43 UTC
[V2] ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
2018-02-02 5:51 UTC
[1/1] usb: host: ehci: always enable interrupt for qtd completion at test mode
2018-02-02 3:28 UTC
ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
2018-02-02 1:46 UTC
[1/1] usb: host: ehci: use correct device pointer for dma ops
2018-02-01 19:25 UTC
[1/1] usb: host: ehci: always enable interrupt for qtd completion at test mode
2018-02-01 19:24 UTC
ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
2018-02-01 15:33 UTC
[2/2] usb: gadget: udc: atmel: convert to use GPIO descriptors
2018-02-01 9:34 UTC
[1/2] usb: gadget: udc: atmel: remove code related to platform stuff
2018-02-01 9:34 UTC
[v2] USB: serial: option: Add support for Quectel EP06
2018-02-01 9:32 UTC
[2/2] arm64: dts: exynos: add OF graph between USB-PHY and MUIC
2018-02-01 8:43 UTC
[2/2] arm64: dts: exynos: add OF graph between USB-PHY and MUIC
2018-02-01 8:19 UTC
[2/2] arm64: dts: exynos: add OF graph between USB-PHY and MUIC
2018-02-01 7:50 UTC
[5/5] USB: serial: f81232: fix bulk_in/out size
2018-02-01 5:50 UTC
ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
2018-02-01 5:48 UTC
[1/1] usb: host: ehci: use correct device pointer for dma ops
2018-02-01 4:26 UTC
[2/2] sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC}
2018-02-01 3:36 UTC
[3/5] USB: serial: f81232: enable remote wakeup via RX/RI pin
2018-02-01 3:13 UTC
[1/1] usb: host: ehci: always enable interrupt for qtd completion at test mode
2018-02-01 2:27 UTC
usb: host: xhci-hub: avoid xhci_warn() when PORT_PE was clear
2018-02-01 2:09 UTC
option: Add support for Quectel EP06
2018-01-31 22:35 UTC
option: Add support for Quectel EP06
2018-01-31 22:32 UTC
[2/2] sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC}
2018-01-31 22:24 UTC
[1/2] usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
2018-01-31 22:24 UTC
option: Add support for Quectel EP06
2018-01-31 22:17 UTC
[v4,15/15] usb: gadget: mass_storage: Set max_speed to SSP
2018-01-31 21:19 UTC
[v4,14/15] usb: dwc3: Check controller type before setting speed
2018-01-31 21:18 UTC
[v4,13/15] usb: dwc3: Add workaround for isoc start transfer failure
2018-01-31 21:18 UTC
[v4,12/15] usb: dwc3: Add disabling of start_transfer failure quirk
2018-01-31 21:18 UTC
[v4,11/15] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-01-31 21:18 UTC
[v4,10/15] usb: dwc3: Dump LSP and BMU debug info
2018-01-31 21:17 UTC
[v4,09/15] usb: dwc3: Check for ESS TX/RX threshold config
2018-01-31 21:16 UTC
[v4,08/15] usb: dwc3: Make TX/RX threshold configurable
2018-01-31 21:16 UTC
[v4,07/15] usb: dwc3: Add DWC_usb31 GTXTHRCFG reg fields
2018-01-31 21:16 UTC
[v4,06/15] usb: dwc3: gadget: Check IP revision for GRXTHRCFG
2018-01-31 21:16 UTC
[v4,05/15] usb: dwc3: Add DWC_usb31 GRXTHRCFG bit fields
2018-01-31 21:16 UTC
[v4,04/15] usb: dwc3: Check IP revision for GTXFIFOSIZ
2018-01-31 21:15 UTC
[v4,03/15] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
2018-01-31 21:15 UTC
[v4,02/15] usb: core: urb: Check SSP isoc ep comp descriptor
2018-01-31 21:15 UTC
[v4,01/15] usb: dwc3: Add SoftReset PHY synchonization delay
2018-01-31 21:14 UTC
ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
2018-01-31 16:02 UTC
[2/2] arm64: dts: exynos: add OF graph between USB-PHY and MUIC
2018-01-31 15:57 UTC
[1/2] USB: dwc3: get extcon device by OF graph bindings
2018-01-31 15:57 UTC
[RFC,v2,5/5] drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
2018-01-31 13:44 UTC
[RFC,v2,4/5] extcon: add possibility to get extcon device by OF node
2018-01-31 13:44 UTC
[RFC,v2,3/5] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-01-31 13:44 UTC
[RFC,v2,2/5] arm64: dts: exynos: add micro-USB connector node to TM2 platforms
2018-01-31 13:44 UTC
[RFC,v2,1/5] dt-bindings: add bindings for USB physical connector
2018-01-31 13:44 UTC
usb: host: xhci-hub: avoid xhci_warn() when PORT_PE was clear
2018-01-31 12:28 UTC
usb: host: xhci-hub: avoid xhci_warn() when PORT_PE was clear
2018-01-31 11:58 UTC
ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
2018-01-31 9:16 UTC
option: Add support for Quectel EP06
2018-01-31 8:56 UTC
option: Add support for Quectel EP06
2018-01-31 6:38 UTC
usb: gadget: core: Fix use-after-free of usb_request
2018-01-31 5:25 UTC
USB TYPEC: RT1711H Type-C Chip Driver
2018-01-30 23:25 UTC
[RFC,usb-next,v8,1/3] dt-bindings: usb: add the documentation for USB HCDs
2018-01-30 17:12 UTC
option: Add support for Quectel EP06
2018-01-30 14:06 UTC
USB TYPEC: RT1711H Type-C Chip Driver
2018-01-30 13:21 UTC
[v4,7/7] typec: tcpm: Add support for sink PPS related messages
2018-01-30 13:18 UTC
[v4,6/7] typec: tcpm: Represent source supply through power_supply class
2018-01-30 13:11 UTC
[v4,5/7] power: supply: Add 'connected_type' property and supporting code
2018-01-30 12:54 UTC
[v4,4/7] typec: tcpm: Add core support for sink side PPS
2018-01-30 12:46 UTC
[v4,3/7] typec: tcpm: Add SDB header for Status message handling
2018-01-30 12:22 UTC
[v4,2/7] typec: tcpm: Add ADO header for Alert message handling
2018-01-30 12:22 UTC
[v4,1/7] typec: tcpm: Add PD Rev 3.0 definitions to PD header
2018-01-30 12:21 UTC
[1/4] dt-bindings: dwc3: add binding documentation for UniPhier dwc3 glue driver
2018-01-30 12:14 UTC
[4/4] config: make USB_MAXBUS configurable and adjust VHCI_NR_HCS top limit
2018-01-30 8:36 UTC
[3/4] usbip tools: use per vhci_hcd controller attributes
2018-01-30 8:36 UTC
[2/4] libusbip: use per vhci_hcd controller attributes
2018-01-30 8:36 UTC
[1/4] usbip: make vhci_hcd.* objects independent of vhci_hcd.0
2018-01-30 8:36 UTC
[v2] usbip: fix protocol documentation
2018-01-30 8:34 UTC
[5/5] USB: serial: f81232: fix bulk_in/out size
2018-01-30 4:11 UTC
[3/5] USB: serial: f81232: enable remote wakeup via RX/RI pin
2018-01-30 3:57 UTC
[2/5] USB: serial: f81232: add high baud rate support
2018-01-30 3:30 UTC
[1/4] dt-bindings: dwc3: add binding documentation for UniPhier dwc3 glue driver
2018-01-30 0:06 UTC
[4.9] usbip: vhci_hcd: clear just the USB_PORT_STAT_POWER bit
2018-01-29 20:13 UTC
[v3,08/15] usb: dwc3: Make TX/RX threshold configurable
2018-01-29 20:08 UTC
USB TYPEC: RT1711H Type-C Chip Driver
2018-01-29 19:57 UTC
[v3,08/15] usb: dwc3: Make TX/RX threshold configurable
2018-01-29 18:46 UTC
Add delay-init quirk for Corsair K70 RGB keyboards
2018-01-29 14:40 UTC
Not enough bandwidth with Magewell XI100DUSB-HDMI
2018-01-29 12:02 UTC
[v2,1/1] usb: xhci: do not create and register shared_hcd when USB3.0 is disabled
2018-01-29 10:24 UTC
[2/3] usb: dwc3: of-simple: add support for shared and pulsed reset lines
2018-01-29 8:18 UTC
USB TYPEC: RT1711H Type-C Chip Driver
2018-01-29 7:19 UTC
[2/2] usb: chipidea: imx: Fix ULPI on imx53
2018-01-29 3:33 UTC
[RFC/RFT,usb-next,v1,5/6] usb: chipidea: do not set the "phy" field in struct usb_hcd
2018-01-29 3:30 UTC
usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS
2018-01-29 0:04 UTC
[3/3] usb: dwc3: of-simple: add support for the Amlogic Meson GXL and AXG SoCs
2018-01-28 20:03 UTC
[2/3] usb: dwc3: of-simple: add support for shared and pulsed reset lines
2018-01-28 20:03 UTC
[1/3] dt-bindings: usb: add support for dwc3 controller on Amlogic Meson GX
2018-01-28 20:03 UTC
[4.9] usbip: vhci_hcd: clear just the USB_PORT_STAT_POWER bit
2018-01-28 12:14 UTC
[v2] usbip: fix protocol documentation
2018-01-28 7:15 UTC
usbip: fix protocol documentation
2018-01-28 7:12 UTC
usbip: fix protocol documentation
2018-01-28 6:47 UTC
[v3,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-01-27 11:07 UTC
usb: musb: fix enumeration after resume
2018-01-27 8:34 UTC
USB: wusbcore: remove redundant re-assignment to pointer 'dev'
2018-01-27 5:16 UTC
[RFC/RFT,usb-next,v1,5/6] usb: chipidea: do not set the "phy" field in struct usb_hcd
2018-01-26 21:05 UTC
usbip: keep usbip_device sockfd state in sync with tcp_socket
2018-01-26 18:56 UTC
[4.4] usbip: vhci_hcd: clear just the USB_PORT_STAT_POWER bit
2018-01-26 18:56 UTC
[4.9] usbip: vhci_hcd: clear just the USB_PORT_STAT_POWER bit
2018-01-26 18:54 UTC
USB: gadget: function: remove redundant initialization of 'tv_nexus'
2018-01-26 15:39 UTC
USB: wusbcore: remove redundant re-assignment to pointer 'dev'
2018-01-26 15:07 UTC
[14/14] usb: dwc2: Enable power down
2018-01-26 11:51 UTC
[13/14] usb: dwc2: Change hub-control to allow hibernation
2018-01-26 11:50 UTC
[12/14] usb: dwc2: Add dwc2_handle_gpwrdn_intr() handler
2018-01-26 11:50 UTC
[11/14] usb: dwc2: Allow entering hibernation from USB_SUSPEND interrupt
2018-01-26 11:50 UTC
[10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-01-26 11:49 UTC
[09/14] usb: dwc2: Add host/device hibernation functions
2018-01-26 11:49 UTC
[08/14] usb: dwc2: Add helper functions for restore routine
2018-01-26 11:48 UTC
[07/14] usb: dwc2: Changes in registers backup/restore functions
2018-01-26 11:48 UTC
[06/14] usb: dwc2: gadget: Add remote_wakeup_allowed flag
2018-01-26 11:47 UTC
[05/14] usb: dwc2: core: Add hibernated flag
2018-01-26 11:47 UTC
[04/14] usb: dwc2: gadget: Fix dwc2_restore_device_registers
2018-01-26 11:46 UTC
[03/14] usb: dwc2: gadget: Moved dtxfsiz backup array place
2018-01-26 11:46 UTC
[02/14] usb: dwc2: Add hibernation field into dwc2_hw_params
2018-01-26 11:46 UTC
[01/14] usb: dwc2: Rename hibernation to partial_power_down
2018-01-26 11:45 UTC
[RFC/RFT,usb-next,v1,5/6] usb: chipidea: do not set the "phy" field in struct usb_hcd
2018-01-26 9:06 UTC
[2/4] usb: dwc3: add dwc3 glue layer for UniPhier SoCs
2018-01-26 7:28 UTC
[v3,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-01-26 4:55 UTC
[2/2] usb: chipidea: imx: Fix ULPI on imx53
2018-01-26 2:51 UTC
[v4,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-01-26 0:01 UTC
[v4,1/2] usb/gadget: Add an EP dispose() callback for EP lifetime tracking
2018-01-26 0:01 UTC
[v3,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-01-25 23:58 UTC
[2/4] usb: dwc3: add dwc3 glue layer for UniPhier SoCs
2018-01-25 21:16 UTC
[RFC/RFT,usb-next,v1,1/6] usb: mtu3: remove custom USB PHY handling
2018-01-25 20:03 UTC
[4.4,4/4] usbip: prevent leaking socket pointer address in messages
2018-01-25 18:37 UTC
[4.4,3/4] usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input
2018-01-25 18:37 UTC
[4.4,2/4] usbip: fix stub_rx: get_pipe() to validate endpoint number
2018-01-25 18:37 UTC
[4.4,1/4] usb: usbip: Fix possible deadlocks reported by lockdep
2018-01-25 18:37 UTC
[1/2] usb: misc: xapea00x: add driver for Xaptum ENF Access Card
2018-01-25 16:43 UTC
[1/2] usb: misc: xapea00x: add driver for Xaptum ENF Access Card
2018-01-25 16:34 UTC
[2/2] usb: dwc3: drd: Fix lock-up on ID change during system suspend/resume
2018-01-25 16:11 UTC
[RFC/RFT,usb-next,v1,3/6] usb: host: ehci-platform: remove custom USB PHY handling
2018-01-25 15:55 UTC
Request to add new VID/PID to PL2303 driver
2018-01-25 9:48 UTC
[3/3] firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
2018-01-25 9:38 UTC
usb: serial: keyspan: remove unused USB_SERIAL_KEYSPAN_X firmware kconfig
2018-01-25 9:37 UTC
Request to add new VID/PID to PL2303 driver
2018-01-25 9:37 UTC
Request to add new VID/PID to PL2303 driver
2018-01-25 8:55 UTC
Request to add new VID/PID to PL2303 driver
2018-01-25 8:51 UTC
usb: gadget: f_fs: Use config_ep_by_speed()
2018-01-25 7:58 UTC
[RFC/RFT,usb-next,v1,1/6] usb: mtu3: remove custom USB PHY handling
2018-01-25 2:47 UTC
[2/4] usb: dwc3: add dwc3 glue layer for UniPhier SoCs
2018-01-25 2:09 UTC
[RFC/RFT,usb-next,v1,6/6] usb: core: hcd: remove support for initializing a single PHY
2018-01-25 0:16 UTC
[RFC/RFT,usb-next,v1,5/6] usb: chipidea: do not set the "phy" field in struct usb_hcd
2018-01-25 0:16 UTC
[RFC/RFT,usb-next,v1,4/6] usb: host: ohci-platform: remove custom USB PHY handling
2018-01-25 0:16 UTC
[RFC/RFT,usb-next,v1,3/6] usb: host: ehci-platform: remove custom USB PHY handling
2018-01-25 0:16 UTC
[RFC/RFT,usb-next,v1,2/6] usb: host: xhci-mtk: remove custom USB PHY handling
2018-01-25 0:16 UTC
[RFC/RFT,usb-next,v1,1/6] usb: mtu3: remove custom USB PHY handling
2018-01-25 0:16 UTC
[RFC,usb-next,v8,3/3] usb: core: hcd: integrate the PHY wrapper into the HCD core
2018-01-25 0:00 UTC
[RFC,usb-next,v8,2/3] usb: core: add a wrapper for the USB PHYs on the HCD
2018-01-25 0:00 UTC
[RFC,usb-next,v8,1/3] dt-bindings: usb: add the documentation for USB HCDs
2018-01-25 0:00 UTC
[2/2] usb: chipidea: imx: Fix ULPI on imx53
2018-01-24 17:14 UTC
[1/2] usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
2018-01-24 17:14 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 16:37 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 16:31 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 16:17 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 16:03 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 15:43 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 15:39 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 15:34 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 15:26 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 15:14 UTC
imx: mx25: Remove SION bit in all pin-mux
2018-01-24 14:56 UTC
[11/11] usb: dwc2: Enable LPM
2018-01-24 13:44 UTC
[10/11] usb: dwc2: Add core state checking
2018-01-24 13:44 UTC
[09/11] usb: dwc2: Add call_gadget() function call
2018-01-24 13:43 UTC
[08/11] usb: dwc2: gadget: Configure the core to enable LPM
2018-01-24 13:43 UTC
[07/11] usb: dwc2: Enable LPM Transaction Received interrupt
2018-01-24 13:43 UTC
[06/11] usb: dwc2: gadget: LPM interrupt handler
2018-01-24 13:42 UTC
[05/11] usb: dwc2: gadget: Add functionality to exit from LPM L1 state
2018-01-24 13:42 UTC
[04/11] usb: dwc2: Add core parameters for LPM support
2018-01-24 13:41 UTC
[03/11] usb: dwc2: Rename GLPMCFG... definitions
2018-01-24 13:41 UTC
[02/11] usb: dwc2: Backup and restore PCGCCTL1 register
2018-01-24 13:40 UTC
[01/11] usb: dwc2: Add ACG support to the driver
2018-01-24 13:40 UTC
[2/4] usb: dwc3: add dwc3 glue layer for UniPhier SoCs
2018-01-24 12:58 UTC
[2/4] usb: dwc3: add dwc3 glue layer for UniPhier SoCs
2018-01-24 12:52 UTC
[2/2] usb: dwc3: drd: Fix lock-up on ID change during system suspend/resume
2018-01-24 12:19 UTC
[1/6] USB: move many drivers to use DEVICE_ATTR_RW
2018-01-24 10:47 UTC
[4.9] usbip: Fix implicit fallthrough warning
2018-01-24 9:11 UTC
[4.9] usbip: prevent vhci_hcd driver from leaking a socket pointer address
2018-01-24 9:03 UTC
[v6,05/99] xarray: Add definition of struct xarray
2018-01-24 8:45 UTC
usb: gadget: f_fs: Process all descriptors during bind
2018-01-24 8:11 UTC
[3/3] firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
2018-01-24 7:41 UTC
[v3,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-01-24 7:40 UTC
[2/3] firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
2018-01-24 5:59 UTC
[v3,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-01-24 3:30 UTC
[4.4] usbip: Fix potential format overflow in userspace tools
2018-01-24 2:35 UTC
[4.4] usbip: Fix implicit fallthrough warning
2018-01-24 2:35 UTC
[4.4] usbip: prevent vhci_hcd driver from leaking a socket pointer address
2018-01-24 2:34 UTC
[4.9] usbip: Fix potential format overflow in userspace tools
2018-01-24 2:32 UTC
[4.9] usbip: Fix implicit fallthrough warning
2018-01-24 2:32 UTC
[4.9] usbip: prevent vhci_hcd driver from leaking a socket pointer address
2018-01-24 2:30 UTC
[v3,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-01-24 2:27 UTC
[3/3] firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
2018-01-24 2:06 UTC
[2/3] firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
2018-01-24 2:06 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).