messages from 2018-02-20 18:12:38 to 2018-02-28 07:53:14 UTC [more...]
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-02-28 7:53 UTC
[v4,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-02-28 6:39 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-02-28 3:40 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-02-28 3:04 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-02-28 2:14 UTC
usbip: tools usbip_attach: Fix cryptic error messages
2018-02-27 22:51 UTC
usbip: tools usbip_attach: Fix cryptic error messages
2018-02-27 22:45 UTC
[v2,1/1] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-02-27 22:27 UTC
[v5,6/6] drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
2018-02-27 22:26 UTC
usbip: tools usbip_network: Fix cryptic error messages
2018-02-27 22:23 UTC
usbip: tools usbip_attach: Fix cryptic error messages
2018-02-27 22:23 UTC
[v4,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-02-27 21:24 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 19:49 UTC
cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWAN
2018-02-27 19:44 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 19:05 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 18:22 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 18:14 UTC
[RFC] usb: hcd: complete URBs in threaded-IRQ context instead of tasklet
2018-02-27 17:39 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 16:56 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-02-27 16:07 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-02-27 15:13 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-02-27 15:09 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 14:59 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-02-27 14:42 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-02-27 14:07 UTC
[RFC] drivers: use 'depends on MFD_SYSCON' instead of 'select MFD_SYSCON'
2018-02-27 13:39 UTC
usbip: vudc: fix null pointer dereference on udc->lock
2018-02-27 13:24 UTC
cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWAN
2018-02-27 13:11 UTC
cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWAN
2018-02-27 13:04 UTC
cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWAN
2018-02-27 12:43 UTC
cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWAN
2018-02-27 12:29 UTC
[v6,5/6] extcon: add possibility to get extcon device by OF node
2018-02-27 12:22 UTC
[v5,6/6] drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
2018-02-27 12:05 UTC
cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWAN
2018-02-27 11:49 UTC
[v2,2/2] usb: dwc3: add dual role support using OTG block
2018-02-27 11:30 UTC
[v2,1/2] usb: dwc3: core.h: add some register definitions
2018-02-27 11:29 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-02-27 11:22 UTC
[v5,6/6] drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
2018-02-27 11:08 UTC
[v5,5/6] extcon: add possibility to get extcon device by OF node
2018-02-27 11:03 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-02-27 11:03 UTC
usb: dwc3: prevent setting PRTCAP to OTG from debugfs
2018-02-27 10:54 UTC
usb: dwc3: Fix lock-up on ID change during system suspend/resume
2018-02-27 10:41 UTC
[RFC] drivers: use 'depends on MFD_SYSCON' instead of 'select MFD_SYSCON'
2018-02-27 10:22 UTC
[RFC] drivers: use 'depends on MFD_SYSCON' instead of 'select MFD_SYSCON'
2018-02-27 9:03 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-02-27 8:41 UTC
usb: host: xhci-rcar: add support for r8a77965
2018-02-27 8:19 UTC
[2/2] usb: gadget: udc: renesas_usb3: add binging for r8a77965
2018-02-27 8:16 UTC
[1/2] usb: renesas_usbhs: add binding for r8a77965
2018-02-27 8:16 UTC
usb: host: xhci-rcar: add support for r8a77965
2018-02-27 8:15 UTC
usb: host: xhci-rcar: add support for r8a77965
2018-02-27 8:11 UTC
[v5,6/6] drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
2018-02-27 7:11 UTC
[v5,5/6] extcon: add possibility to get extcon device by OF node
2018-02-27 7:11 UTC
[v5,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-02-27 7:11 UTC
[v5,3/6] arm64: dts: exynos: add micro-USB connector node to TM2 platforms
2018-02-27 7:11 UTC
[v5,2/6] dt-bindings: add bindings for Samsung micro-USB 11-pin connector
2018-02-27 7:11 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-02-27 7:11 UTC
[v4,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-02-27 7:06 UTC
[1/2] usb: gadget: udc: Use scnprintf() instead of snprintf()
2018-02-27 2:14 UTC
[1/2] usb: gadget: udc: Use scnprintf() instead of snprintf()
2018-02-27 2:04 UTC
[RFC] drivers: use 'depends on MFD_SYSCON' instead of 'select MFD_SYSCON'
2018-02-27 0:46 UTC
[3/3] console: Expand dummy functions for CFI
2018-02-27 0:04 UTC
[2/3] console: Fill in struct consw argument names
2018-02-27 0:04 UTC
[1/3] console: SisUSB2VGA: Drop dummy con_font_get()
2018-02-27 0:04 UTC
[v3] usb: core: Add "quirks" parameter for usbcore
2018-02-26 22:30 UTC
[3.16] staging: usbip stub_rx fix static checker warning on unnecessary checks
2018-02-26 21:12 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-26 19:35 UTC
[v4,01/12] drivers: base: Unified device connection lookup
2018-02-26 19:34 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-26 19:08 UTC
[v4,12/12] extcon: axp288: Set USB role where necessary
2018-02-26 18:39 UTC
[v4,11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port
2018-02-26 18:39 UTC
[v4,10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
2018-02-26 18:39 UTC
[v4,09/12] usb: roles: Add Intel xHCI USB role switch driver
2018-02-26 18:39 UTC
[v4,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-02-26 18:39 UTC
[v4,07/12] xhci: Add option to get next extended capability in list by passing id = 0
2018-02-26 18:39 UTC
[v4,06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
2018-02-26 18:39 UTC
[v4,05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
2018-02-26 18:39 UTC
[v4,04/12] usb: common: Small class for USB role switches
2018-02-26 18:39 UTC
[v4,03/12] usb: typec: API for controlling USB Type-C Multiplexers
2018-02-26 18:39 UTC
[v4,02/12] usb: typec: Start using ERR_PTR
2018-02-26 18:39 UTC
[v4,01/12] drivers: base: Unified device connection lookup
2018-02-26 18:39 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-26 18:12 UTC
[1/2,USB] /[misc]: Add waiting in transfer abortion
2018-02-26 17:40 UTC
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-02-26 17:38 UTC
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-02-26 17:19 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-26 17:10 UTC
usbip: vudc: fix null pointer dereference on udc->lock
2018-02-26 16:40 UTC
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-02-26 15:57 UTC
[v4,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-02-26 15:21 UTC
[v4] usb: core: Add "quirks" parameter for usbcore
2018-02-26 15:04 UTC
[2/4] usb: dwc3: add dwc3 glue layer for UniPhier SoCs
2018-02-26 14:48 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-02-26 14:30 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-02-26 14:06 UTC
[v2,02/12] usb: typec: add API to get sink and source config
2018-02-26 13:32 UTC
[v2,01/12] usb: typec: add API to get port type and preferred role
2018-02-26 13:19 UTC
[RFC] drivers: use 'depends on MFD_SYSCON' instead of 'select MFD_SYSCON'
2018-02-26 12:43 UTC
[1/2,USB] /[misc]: Add waiting in transfer abortion
2018-02-26 12:06 UTC
[RFC] drivers: use 'depends on MFD_SYSCON' instead of 'select MFD_SYSCON'
2018-02-26 11:53 UTC
[v2,12/12] staging: typec: tcpci: move tcpci driver out of staging
2018-02-26 11:49 UTC
[v2,11/12] dt-bindings: usb: add documentation for typec port controller(TCPCI)
2018-02-26 11:49 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-02-26 11:49 UTC
[v2,09/12] staging: typec: tcpci: Only touch target bit when enable vconn
2018-02-26 11:49 UTC
[v2,08/12] staging: typec: tcpci: keep the uncontact cc line open
2018-02-26 11:49 UTC
[v2,07/12] staging: typec: tcpci: correct drp toggling
2018-02-26 11:49 UTC
[v2,06/12] typec: tcpm: add starting value for drp toggling
2018-02-26 11:49 UTC
[v2,05/12] staging: typec: tcpci: enable vbus detection
2018-02-26 11:49 UTC
[v2,04/12] staging: typec: tcpci: register port before request irq
2018-02-26 11:49 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-02-26 11:49 UTC
[v2,02/12] usb: typec: add API to get sink and source config
2018-02-26 11:49 UTC
[v2,01/12] usb: typec: add API to get port type and preferred role
2018-02-26 11:49 UTC
[v3,09/12] usb: roles: Add Intel xHCI USB role switch driver
2018-02-26 11:42 UTC
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-02-26 10:56 UTC
usb: serial: ftdi_sio: Add RT Systems VX-8 cable
2018-02-26 10:37 UTC
[RFC] ehci-omap: simple suspend implementation
2018-02-26 9:14 UTC
[v3,12/12] extcon: axp288: Set USB role where necessary
2018-02-26 9:09 UTC
[v3,11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port
2018-02-26 9:09 UTC
[v3,10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
2018-02-26 9:09 UTC
[v3,09/12] usb: roles: Add Intel xHCI USB role switch driver
2018-02-26 9:09 UTC
[v3,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-02-26 9:09 UTC
[v3,07/12] xhci: Add option to get next extended capability in list by passing id = 0
2018-02-26 9:09 UTC
[v3,06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
2018-02-26 9:09 UTC
[v3,05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
2018-02-26 9:09 UTC
[v3,04/12] usb: common: Small class for USB role switches
2018-02-26 9:09 UTC
[v3,03/12] usb: typec: API for controlling USB Type-C Multiplexers
2018-02-26 9:09 UTC
[v3,02/12] usb: typec: Start using ERR_PTR
2018-02-26 9:09 UTC
[v3,01/12] drivers: base: Unified device connection lookup
2018-02-26 9:09 UTC
[RFC] drivers: use 'depends on MFD_SYSCON' instead of 'select MFD_SYSCON'
2018-02-26 8:43 UTC
[v2,12/12] extcon: axp288: Set USB role where necessary
2018-02-26 8:07 UTC
[RFC] ehci-omap: simple suspend implementation
2018-02-26 7:04 UTC
[usb-next,v10,2/8] usb: add a flag to skip PHY initialization to struct usb_hcd
2018-02-26 3:26 UTC
[v2,06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
2018-02-25 21:38 UTC
[v2,02/12] usb: typec: Start using ERR_PTR
2018-02-25 21:38 UTC
[v2,05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
2018-02-25 21:33 UTC
[v2,03/12] usb: typec: API for controlling USB Type-C Multiplexers
2018-02-25 19:22 UTC
[v2,01/12] drivers: base: Unified device connection lookup
2018-02-25 19:04 UTC
[v2,12/12] extcon: axp288: Set USB role where necessary
2018-02-25 18:51 UTC
[v2,09/12] usb: roles: Add Intel xHCI USB role switch driver
2018-02-25 18:48 UTC
[v3] usb: core: Add "quirks" parameter for usbcore
2018-02-25 15:45 UTC
[v2,12/12] extcon: axp288: Set USB role where necessary
2018-02-25 15:25 UTC
[v2,11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port
2018-02-25 15:25 UTC
[v2,10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
2018-02-25 15:25 UTC
[v2,09/12] usb: roles: Add Intel xHCI USB role switch driver
2018-02-25 15:25 UTC
[v2,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-02-25 15:25 UTC
[v2,07/12] xhci: Add option to get next extended capability in list by passing id = 0
2018-02-25 15:25 UTC
[v2,06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
2018-02-25 15:25 UTC
[v2,05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
2018-02-25 15:25 UTC
[v2,04/12] usb: common: Small class for USB role switches
2018-02-25 15:25 UTC
[v2,03/12] usb: typec: API for controlling USB Type-C Multiplexers
2018-02-25 15:25 UTC
[v2,02/12] usb: typec: Start using ERR_PTR
2018-02-25 15:25 UTC
[v2,01/12] drivers: base: Unified device connection lookup
2018-02-25 15:24 UTC
[v3] usb: core: Add "quirks" parameter for usbcore
2018-02-25 15:18 UTC
[12/12] extcon: axp288: Set USB role where necessary
2018-02-25 13:49 UTC
[09/12] usb: roles: Add Intel XHCI USB role switch driver
2018-02-25 13:29 UTC
[08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-02-25 13:01 UTC
[v3] usb: core: Add "quirks" parameter for usbcore
2018-02-25 12:38 UTC
[04/12] usb: common: Small class for USB role switches
2018-02-25 12:16 UTC
[04/12] usb: common: Small class for USB role switches
2018-02-25 12:16 UTC
[03/12] usb: typec: API for controlling USB Type-C Multiplexers
2018-02-25 12:13 UTC
[RFC] drivers: use 'depends on MFD_SYSCON' instead of 'select MFD_SYSCON'
2018-02-25 12:13 UTC
[09/12] usb: roles: Add Intel XHCI USB role switch driver
2018-02-25 12:11 UTC
[RFC] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-02-25 9:01 UTC
[RFC] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-02-24 20:51 UTC
[RFC] drivers: use 'depends on MFD_SYSCON' instead of 'select MFD_SYSCON'
2018-02-24 14:50 UTC
WARN: Success on ctrl setup TRB without IOC set??
2018-02-24 2:35 UTC
usb: serial: ftdi_sio: Add RT Systems VX-8 cable
2018-02-23 20:29 UTC
[v3] usb: host: ehci-platform: add support for optional external vbus supply
2018-02-23 13:46 UTC
usb: host: ohci-pxa27x: Fix and & vs | typo
2018-02-23 12:33 UTC
[v2] usb: host: ehci-platform: add support for optional external vbus supply
2018-02-23 10:46 UTC
[RFC] usb: hcd: complete URBs in threaded-IRQ context instead of tasklet
2018-02-22 18:45 UTC
[v2] usb: host: ehci-platform: add support for optional external vbus supply
2018-02-22 18:27 UTC
usbip: vudc: fix null pointer dereference on udc->lock
2018-02-22 17:39 UTC
[RFC] usb: hcd: complete URBs in threaded-IRQ context instead of tasklet
2018-02-22 16:19 UTC
[3/7] usb: dwc3: pci: Store device properties dynamically
2018-02-22 15:20 UTC
[v2] usb: host: ehci-platform: add support for optional external vbus supply
2018-02-22 10:17 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-02-22 10:16 UTC
[v4,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-02-22 2:57 UTC
[v2] usb: quirks: add control message delay for 1b1c:1b20
2018-02-22 0:51 UTC
usb: quirks: add control message delay for 1b1c:1b20
2018-02-22 0:46 UTC
[3/7] usb: dwc3: pci: Store device properties dynamically
2018-02-21 23:57 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-02-21 22:15 UTC
[v4,5/6] extcon: add possibility to get extcon device by OF node
2018-02-21 15:54 UTC
[v3] Handle vendor defined behavior in tcpci_init, tcpci_set_vconn and export tcpci_irq. More operations can be extended in tcpci_data if needed. According to TCPCI specification, 4.4.5.2 ROLE_CONTROL, TCPC shall not start DRP toggling until subsequently
2018-02-21 15:04 UTC
[Regression] xhci: some hard drives cannot be seen using a JMicron JMS56x enclosure
2018-02-21 15:04 UTC
usb: phy-generic: Use gpiod_set_value_cansleep
2018-02-21 15:04 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-02-21 15:02 UTC
[3/7] usb: dwc3: pci: Store device properties dynamically
2018-02-21 14:45 UTC
[v3] Handle vendor defined behavior in tcpci_init, tcpci_set_vconn and export tcpci_irq. More operations can be extended in tcpci_data if needed. According to TCPCI specification, 4.4.5.2 ROLE_CONTROL, TCPC shall not start DRP toggling until subsequently
2018-02-21 14:39 UTC
[v3] Handle vendor defined behavior in tcpci_init, tcpci_set_vconn and export tcpci_irq. More operations can be extended in tcpci_data if needed. According to TCPCI specification, 4.4.5.2 ROLE_CONTROL, TCPC shall not start DRP toggling until subsequently
2018-02-21 14:30 UTC
[v4,5/6] extcon: add possibility to get extcon device by OF node
2018-02-21 14:27 UTC
[4.15,152/163] usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
2018-02-21 12:49 UTC
[4.14,151/167] usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
2018-02-21 12:49 UTC
[4.9,32/77] usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
2018-02-21 12:48 UTC
[v4,6/6] drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
2018-02-21 8:55 UTC
[v4,5/6] extcon: add possibility to get extcon device by OF node
2018-02-21 8:55 UTC
[v4,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-02-21 8:55 UTC
[v4,3/6] arm64: dts: exynos: add micro-USB connector node to TM2 platforms
2018-02-21 8:55 UTC
[v4,2/6] dt-bindings: add bindings for Samsung micro-USB 11-pin connector
2018-02-21 8:55 UTC
[v4,1/6] dt-bindings: add bindings for USB physical connector
2018-02-21 8:55 UTC
[3/7] usb: dwc3: pci: Store device properties dynamically
2018-02-20 21:12 UTC
[2/7] usb: dwc3: pci: Set an easily recognizable device name
2018-02-20 21:11 UTC
usb: dwc3: debugfs: Re-use DEFINE_SHOW_ATTRIBUTE() macro
2018-02-20 18:12 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).