messages from 2018-02-27 16:07:55 to 2018-03-07 09:46:57 UTC [more...]
[net-next,1/2] net: kalmia: clean up bind error path
2018-03-07 9:46 UTC
[v2] xhci: Fix front USB ports on ASUS PRIME B350M-A
2018-03-07 6:09 UTC
usb: gadget: udc: bdc: Use dma_pool_zalloc
2018-03-06 18:05 UTC
[v5,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-03-06 16:49 UTC
[v5,3/6] arm64: dts: exynos: add micro-USB connector node to TM2 platforms
2018-03-06 16:49 UTC
uas: fix comparison for error code
2018-03-06 14:52 UTC
[v4,1/2] dt-bindings: usb: ehci: add optional external vbus supply property
2018-03-06 14:40 UTC
[v4,1/2] dt-bindings: usb: ehci: add optional external vbus supply property
2018-03-06 14:09 UTC
uas: fix comparison for error code
2018-03-06 14:04 UTC
[4.16,REGRESSION,fix] Revert "typec: tcpm: Only request matching pdos"
2018-03-06 12:32 UTC
[4.16,REGRESSION,fix] Revert "typec: tcpm: Only request matching pdos"
2018-03-06 12:04 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-06 12:02 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-06 11:54 UTC
[4.16,REGRESSION,fix] Revert "typec: tcpm: Only request matching pdos"
2018-03-06 9:56 UTC
[4.16,REGRESSION,fix] Revert "typec: tcpm: Only request matching pdos"
2018-03-06 9:50 UTC
[2/2] usb: gadget: udc: renesas_usb3: add binging for r8a77965
2018-03-06 9:40 UTC
[1/2] usb: renesas_usbhs: add binding for r8a77965
2018-03-06 9:40 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-06 9:38 UTC
usb: host: xhci-rcar: add support for r8a77965
2018-03-06 9:38 UTC
[v5,3/3] USB3/DWC3: Enable undefined length INCR burst type
2018-03-06 8:59 UTC
[v5,2/3] USB3/DWC3: Add property "snps,incr-burst-type-adjustment" for INCR burst type
2018-03-06 8:59 UTC
[v5,1/3] USB3/DWC3: Add definition for global soc bus configuration register
2018-03-06 8:59 UTC
[resend] usb: quirks: add control message delay for 1b1c:1b20
2018-03-06 8:38 UTC
USB: serial: cp210x: add ELDAT Easywave RX09 id
2018-03-06 8:32 UTC
[v4,1/2] dt-bindings: usb: ehci: add optional external vbus supply property
2018-03-06 1:57 UTC
[PATCHv2] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-06 1:53 UTC
[v7] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-06 1:50 UTC
[1/1] usb: host: xhci: do not return error status for URB
2018-03-06 0:46 UTC
[2/2] usb: gadget: udc: renesas_usb3: add binging for r8a77965
2018-03-05 22:17 UTC
[1/2] usb: renesas_usbhs: add binding for r8a77965
2018-03-05 22:16 UTC
usb: host: xhci-rcar: add support for r8a77965
2018-03-05 22:15 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-05 22:14 UTC
[net] net: usbnet: fix potential deadlock on 32bit hosts
2018-03-05 19:41 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-03-05 19:09 UTC
[v2,1/1] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-03-05 18:57 UTC
[v2,1/1] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-03-05 18:35 UTC
[v2,1/1] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-03-05 17:38 UTC
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-03-05 17:35 UTC
[RFC] cdc-acm: do not drop data from fast devices
2018-03-05 16:04 UTC
[v6] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-05 15:16 UTC
[v6] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-05 14:49 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 12:38 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 12:25 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-03-05 11:46 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 11:30 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:27 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:25 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:25 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:14 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:06 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:03 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 10:41 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 10:35 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-05 10:27 UTC
[v2,1/1] usb: xhci: do not create and register shared_hcd when USB3.0 is disabled
2018-03-05 10:22 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 9:59 UTC
[RFC] cdc-acm: do not drop data from fast devices
2018-03-05 9:55 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 9:53 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 9:45 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 8:53 UTC
[v2] usb: phy: mxs: Fix NULL pointer dereference on i.MX23/28
2018-03-05 8:51 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 8:49 UTC
[v2,02/12] usb: typec: add API to get sink and source config
2018-03-05 8:40 UTC
[usb-next,v11,5/8] usb: host: xhci-mtk: remove custom USB PHY handling
2018-03-05 8:31 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-05 8:18 UTC
[v2,01/12] usb: typec: add API to get port type and preferred role
2018-03-05 7:54 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 7:52 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-03-05 7:45 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 7:07 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 7:00 UTC
usb: clarify ACPI spec version and section number for _UPC & _PLD
2018-03-05 5:57 UTC
[v6] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-05 4:16 UTC
WARN_ON(irqs_disabled()) in dma_free_attrs?
2018-03-05 2:05 UTC
[2/2] net: usb: asix88179_178a: de-duplicate code
2018-03-04 18:32 UTC
WARN_ON(irqs_disabled()) in dma_free_attrs?
2018-03-04 17:59 UTC
usb: dwc2: detect power supplies to reduce spam
2018-03-04 3:20 UTC
[AUTOSEL,for,4.4,073/115] usb: dwc2: Make sure we disconnect the gadget state
2018-03-03 22:31 UTC
[AUTOSEL,for,4.9,146/219] usb: dwc2: Make sure we disconnect the gadget state
2018-03-03 22:29 UTC
[usb-next,v11,8/8] usb: core: hcd: remove support for initializing a single PHY
2018-03-03 21:43 UTC
[usb-next,v11,7/8] usb: host: ohci-platform: remove custom USB PHY handling
2018-03-03 21:43 UTC
[usb-next,v11,6/8] usb: host: ehci-platform: remove custom USB PHY handling
2018-03-03 21:43 UTC
[usb-next,v11,5/8] usb: host: xhci-mtk: remove custom USB PHY handling
2018-03-03 21:43 UTC
[usb-next,v11,4/8] usb: core: hcd: integrate the PHY wrapper into the HCD core
2018-03-03 21:43 UTC
[usb-next,v11,3/8] usb: core: add a wrapper for the USB PHYs on the HCD
2018-03-03 21:43 UTC
[usb-next,v11,2/8] usb: add a flag to skip PHY initialization to struct usb_hcd
2018-03-03 21:43 UTC
[usb-next,v11,1/8] dt-bindings: usb: add the documentation for USB HCDs
2018-03-03 21:43 UTC
[v2,11/12] dt-bindings: usb: add documentation for typec port controller(TCPCI)
2018-03-02 22:56 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-02 22:38 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-02 22:29 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-02 18:43 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-02 17:38 UTC
net/usb/kalmia: use ARRAY_SIZE for various array sizing calculations
2018-03-02 15:05 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-02 14:38 UTC
[PATCHv2] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-02 14:03 UTC
net/usb/kalmia: use ARRAY_SIZE for various array sizing calculations
2018-03-02 13:42 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-02 13:13 UTC
[1/1] usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb()
2018-03-02 11:20 UTC
[v6,12/12] extcon: axp288: Set USB role where necessary
2018-03-02 10:20 UTC
[v6,11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port
2018-03-02 10:20 UTC
[v6,10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
2018-03-02 10:20 UTC
[v6,09/12] usb: roles: Add Intel xHCI USB role switch driver
2018-03-02 10:20 UTC
[v6,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-03-02 10:20 UTC
[v6,07/12] xhci: Add option to get next extended capability in list by passing id = 0
2018-03-02 10:20 UTC
[v6,06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
2018-03-02 10:20 UTC
[v6,05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
2018-03-02 10:20 UTC
[v6,04/12] usb: common: Small class for USB role switches
2018-03-02 10:20 UTC
[v6,03/12] usb: typec: API for controlling USB Type-C Multiplexers
2018-03-02 10:20 UTC
[v6,02/12] usb: typec: Start using ERR_PTR
2018-03-02 10:20 UTC
[v6,01/12] drivers: base: Unified device connection lookup
2018-03-02 10:20 UTC
usb: Don't disable Latency tolerance Messaging (LTM) before port reset
2018-03-02 9:27 UTC
[v5,12/12] extcon: axp288: Set USB role where necessary
2018-03-02 9:06 UTC
[PATCHv2] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-02 8:03 UTC
[v5,12/12] extcon: axp288: Set USB role where necessary
2018-03-02 0:39 UTC
[v5,6/6] drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
2018-03-02 0:29 UTC
usb: Don't disable Latency tolerance Messaging (LTM) before port reset
2018-03-01 18:07 UTC
USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
2018-03-01 18:04 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-01 17:37 UTC
[v2] staging: rtl8188eu: Move a blank line
2018-03-01 17:37 UTC
USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
2018-03-01 17:34 UTC
[3/7] usb: dwc3: pci: Store device properties dynamically
2018-03-01 17:24 UTC
[1/3] staging: rtl8192e: Fix issues regarding blank lines
2018-03-01 17:09 UTC
[2/3] usb: xhci: tegra: Add runtime PM support
2018-03-01 14:18 UTC
usb: Don't disable Latency tolerance Messaging (LTM) before port reset
2018-03-01 12:21 UTC
usb: Don't disable Latency tolerance Messaging (LTM) before port reset
2018-03-01 11:56 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-01 11:53 UTC
usb: Don't disable Latency tolerance Messaging (LTM) before port reset
2018-03-01 11:17 UTC
usb: Don't disable Latency tolerance Messaging (LTM) before port reset
2018-03-01 11:15 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-01 10:06 UTC
[RESEND,2/2] usb: dwc2: fix STM32F7 USB OTG HS compatible
2018-03-01 10:05 UTC
[RESEND,1/2] dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding
2018-03-01 10:05 UTC
[v4,2/2] usb: host: ehci-platform: add support for optional external vbus supply
2018-03-01 9:51 UTC
[v4,1/2] dt-bindings: usb: ehci: add optional external vbus supply property
2018-03-01 9:51 UTC
[v5,01/12] drivers: base: Unified device connection lookup
2018-03-01 9:45 UTC
[v5,01/12] drivers: base: Unified device connection lookup
2018-03-01 9:32 UTC
[v3] usb: host: ehci-platform: add support for optional external vbus supply
2018-03-01 8:49 UTC
[v3] usb: host: ehci-platform: add support for optional external vbus supply
2018-03-01 8:47 UTC
[3/7] usb: dwc3: pci: Store device properties dynamically
2018-03-01 8:24 UTC
usb: usb-skeleton: make MODULE_LICENSE and SPDX tag match
2018-03-01 7:55 UTC
[v5,01/12] drivers: base: Unified device connection lookup
2018-03-01 7:28 UTC
[v5,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-03-01 7:23 UTC
usb: gadget: fsl_udc_core: fix ep valid checks
2018-03-01 4:44 UTC
[v5] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-01 3:55 UTC
[PATCHv2] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-01 3:50 UTC
[v4] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-01 3:47 UTC
phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-01 3:47 UTC
phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-01 3:46 UTC
[v5,01/12] drivers: base: Unified device connection lookup
2018-03-01 0:56 UTC
[v4] usb: core: Add "quirks" parameter for usbcore
2018-03-01 0:08 UTC
[v4] usb: core: Add "quirks" parameter for usbcore
2018-02-28 23:52 UTC
[v2,1/1] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-02-28 21:59 UTC
[2/2] net: usb: asix88179_178a: de-duplicate code
2018-02-28 21:27 UTC
[1/2] net: usb: asix88179_178a: set permanent address once only
2018-02-28 21:27 UTC
[3/7] usb: dwc3: pci: Store device properties dynamically
2018-02-28 18:44 UTC
[v4] usb: core: Add "quirks" parameter for usbcore
2018-02-28 16:31 UTC
[2/2] usb: host: xhci-plat: Fix clock resource by adding a register clock
2018-02-28 16:24 UTC
[2/2] usb: host: xhci-plat: Fix clock resource by adding a register clock
2018-02-28 16:09 UTC
[2/2] usb: host: xhci-plat: Fix clock resource by adding a register clock
2018-02-28 16:05 UTC
[v4] usb: core: Add "quirks" parameter for usbcore
2018-02-28 16:01 UTC
[v5,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-02-28 15:42 UTC
[v5,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-02-28 15:15 UTC
[v5,12/12] extcon: axp288: Set USB role where necessary
2018-02-28 15:07 UTC
[v5,11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port
2018-02-28 15:07 UTC
[v5,10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
2018-02-28 15:07 UTC
[v5,09/12] usb: roles: Add Intel xHCI USB role switch driver
2018-02-28 15:07 UTC
[v5,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-02-28 15:07 UTC
[v5,07/12] xhci: Add option to get next extended capability in list by passing id = 0
2018-02-28 15:07 UTC
[v5,06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
2018-02-28 15:07 UTC
[v5,05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
2018-02-28 15:07 UTC
[v5,04/12] usb: common: Small class for USB role switches
2018-02-28 15:07 UTC
[v5,03/12] usb: typec: API for controlling USB Type-C Multiplexers
2018-02-28 15:07 UTC
[v5,02/12] usb: typec: Start using ERR_PTR
2018-02-28 15:07 UTC
[v5,01/12] drivers: base: Unified device connection lookup
2018-02-28 15:07 UTC
[v4,01/12] drivers: base: Unified device connection lookup
2018-02-28 15:06 UTC
[v4] usb: core: Add "quirks" parameter for usbcore
2018-02-28 14:47 UTC
[Regression] xhci: some hard drives cannot be seen using a JMicron JMS56x enclosure
2018-02-28 13:55 UTC
[v5,6/6] drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
2018-02-28 13:44 UTC
[v3] usb: host: ehci-platform: add support for optional external vbus supply
2018-02-28 13:33 UTC
[v3] usb: host: ehci-platform: add support for optional external vbus supply
2018-02-28 11:01 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-02-28 9:59 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-02-28 9:55 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-02-28 7:53 UTC
[v4,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-02-28 6:39 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-02-28 3:40 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-02-28 3:04 UTC
staging: typec: handle vendor defined part and modify drp toggling flow
2018-02-28 2:14 UTC
usbip: tools usbip_attach: Fix cryptic error messages
2018-02-27 22:51 UTC
usbip: tools usbip_attach: Fix cryptic error messages
2018-02-27 22:45 UTC
[v2,1/1] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-02-27 22:27 UTC
[v5,6/6] drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
2018-02-27 22:26 UTC
usbip: tools usbip_network: Fix cryptic error messages
2018-02-27 22:23 UTC
usbip: tools usbip_attach: Fix cryptic error messages
2018-02-27 22:23 UTC
[v4,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-02-27 21:24 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 19:49 UTC
cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWAN
2018-02-27 19:44 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 19:05 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 18:22 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 18:14 UTC
[RFC] usb: hcd: complete URBs in threaded-IRQ context instead of tasklet
2018-02-27 17:39 UTC
[v1,1/1] drivers/usb/storage: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
2018-02-27 16:56 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-02-27 16:07 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox