messages from 2018-03-09 10:36:58 to 2018-03-15 04:43:21 UTC [more...]
[v3,11/12] staging: typec: tcpci: Only touch target bit when enable vconn
2018-03-15 4:43 UTC
[v4,13/15] usb: dwc3: Add workaround for isoc start transfer failure
2018-03-15 2:03 UTC
lan78xx: Connect phy early
2018-03-14 23:25 UTC
USB: misc: uss720: more vendor/product ID's
2018-03-14 22:20 UTC
[v4,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-14 21:03 UTC
[v3,09/12] typec: tcpm: add starting value for drp toggling
2018-03-14 18:13 UTC
WARN_ON(irqs_disabled()) in dma_free_attrs?
2018-03-14 17:43 UTC
[38/47] usb: musb: remove blackfin port
2018-03-14 17:12 UTC
[37/47] usb: host: remove tilegx platform glue
2018-03-14 16:44 UTC
[37/47] usb: host: remove tilegx platform glue
2018-03-14 16:33 UTC
[38/47] usb: musb: remove blackfin port
2018-03-14 16:33 UTC
[2/2] usb: host: xhci-plat: Fix clock resource by adding a register clock
2018-03-14 15:56 UTC
[2/3] usb: host: pci: introduce PCI vendor ID for Netlogic
2018-03-14 15:44 UTC
[38/47] usb: musb: remove blackfin port
2018-03-14 15:35 UTC
[37/47] usb: host: remove tilegx platform glue
2018-03-14 15:35 UTC
[2/3] usb: host: pci: introduce PCI vendor ID for Netlogic
2018-03-14 15:27 UTC
lan78xx: Connect phy early
2018-03-14 15:26 UTC
lan78xx: Connect phy early
2018-03-14 14:54 UTC
[11/16] treewide: simplify Kconfig dependencies for removed archs
2018-03-14 14:43 UTC
[v1,2/2] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-03-14 13:40 UTC
[2/3] usb: host: pci: introduce PCI vendor ID for Netlogic
2018-03-14 13:31 UTC
usb: dwc2: Fix interval type issue
2018-03-14 13:16 UTC
[v8,12/12] extcon: axp288: Set USB role where necessary
2018-03-14 13:12 UTC
[v8,11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port
2018-03-14 13:12 UTC
[v8,10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
2018-03-14 13:12 UTC
[v8,09/12] usb: roles: Add Intel xHCI USB role switch driver
2018-03-14 13:12 UTC
[v8,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-03-14 13:12 UTC
[v8,07/12] xhci: Add option to get next extended capability in list by passing id = 0
2018-03-14 13:12 UTC
[v8,06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
2018-03-14 13:12 UTC
[v8,05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
2018-03-14 13:12 UTC
[v8,04/12] usb: typec: Separate the definitions for data and power roles
2018-03-14 13:12 UTC
[v8,03/12] usb: common: Small class for USB role switches
2018-03-14 13:12 UTC
[v8,02/12] usb: typec: API for controlling USB Type-C Multiplexers
2018-03-14 13:12 UTC
[v8,01/12] drivers: base: Unified device connection lookup
2018-03-14 13:12 UTC
[v7,01/12] drivers: base: Unified device connection lookup
2018-03-14 12:25 UTC
[2/3] usb: host: pci: introduce PCI vendor ID for Netlogic
2018-03-14 12:17 UTC
[v7,01/12] drivers: base: Unified device connection lookup
2018-03-14 12:13 UTC
[2/3] usb: host: pci: introduce PCI vendor ID for Netlogic
2018-03-14 11:49 UTC
[3/3] usb: host: pci: replace hardcoded renesas PCI IDs
2018-03-14 11:38 UTC
[2/3] usb: host: pci: introduce PCI vendor ID for Netlogic
2018-03-14 11:36 UTC
[v7,01/12] drivers: base: Unified device connection lookup
2018-03-14 11:16 UTC
[3/3] usb: host: pci: replace hardcoded renesas PCI IDs
2018-03-14 10:49 UTC
[2/3] usb: host: pci: introduce PCI vendor ID for Netlogic
2018-03-14 10:48 UTC
[1/3] usb: host: pci: use existing Intel PCI ID macros
2018-03-14 10:48 UTC
[v1,2/2] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-03-14 10:46 UTC
[RFC] usb: typec: tcpm: match source fixed pdo with sink variable pdo
2018-03-14 10:38 UTC
[3/3] usb: host: pci: replace hardcoded renesas PCI IDs
2018-03-14 10:29 UTC
[2/3] usb: host: pci: introduce PCI vendor ID for Netlogic
2018-03-14 10:29 UTC
[1/3] usb: host: pci: use existing Intel PCI ID macros
2018-03-14 10:29 UTC
usb: dwc2: Fix interval type issue
2018-03-14 10:12 UTC
[v3,04/12] usb: typec: add API to get typec basic port power and data config
2018-03-14 9:59 UTC
[v3] usb: core: introduce per-port over-current counters
2018-03-14 9:51 UTC
[v3,01/12] dt-bindings: connector: add properties for typec
2018-03-14 9:49 UTC
[v3,01/12] dt-bindings: connector: add properties for typec
2018-03-14 9:40 UTC
[RFC] usb: typec: tcpm: match source fixed pdo with sink variable pdo
2018-03-14 9:32 UTC
[usb-next] usb: dwc2: ix spelling mistake: "genereted" -> "generated"
2018-03-14 9:00 UTC
[v3,10/12] staging: typec: tcpci: keep the not connecting cc line open
2018-03-14 8:59 UTC
[v4,13/15] usb: dwc3: Add workaround for isoc start transfer failure
2018-03-14 8:56 UTC
[v4,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-14 8:54 UTC
[v1,2/2] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-03-14 8:50 UTC
usb: misc: supports Apple Carplay driver
2018-03-14 8:20 UTC
usb: misc: supports Apple Carplay driver
2018-03-14 6:16 UTC
[v2,3/3] dt-bindings: phy-mtk-tphy: add properties for U2 slew rate calibrate
2018-03-14 6:09 UTC
[v2,2/3] phy: phy-mtk-tphy: add configurable parameters for slew rate calibrate
2018-03-14 6:08 UTC
usb: misc: supports Apple Carplay driver
2018-03-14 6:02 UTC
[v1,2/2] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-03-14 4:39 UTC
[v1,2/2] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-03-14 4:21 UTC
[v4,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-14 3:53 UTC
[v6] usb: core: Add "quirks" parameter for usbcore
2018-03-14 2:00 UTC
[v3,03/12] usb: typec: add fwnode to tcpc
2018-03-14 1:27 UTC
[v4,02/15] usb: core: urb: Check SSP isoc ep comp descriptor
2018-03-14 1:02 UTC
[v4,13/15] usb: dwc3: Add workaround for isoc start transfer failure
2018-03-14 0:58 UTC
[v2,2/3] phy: phy-mtk-tphy: add configurable parameters for slew rate calibrate
2018-03-13 23:21 UTC
[v2,3/3] dt-bindings: phy-mtk-tphy: add properties for U2 slew rate calibrate
2018-03-13 23:21 UTC
[v2] usb: musb: Fix external abort in musb_remove on omap2430
2018-03-13 20:11 UTC
[2/2] USB: show USB3 Gen XxY version during device enumeration
2018-03-13 15:56 UTC
[1/2] USB: Add support to store lane count used by USB 3.2
2018-03-13 15:53 UTC
[usb-next] usb: dwc2: ix spelling mistake: "genereted" -> "generated"
2018-03-13 15:50 UTC
[2/2] USB: show USB3 Gen XxY version during device enumeration
2018-03-13 15:31 UTC
[1/2] USB: Add support to store lane count used by USB 3.2
2018-03-13 15:29 UTC
[2/2] USB: show USB3 Gen XxY version during device enumeration
2018-03-13 15:27 UTC
[1/2] USB: Add support to store lane count used by USB 3.2
2018-03-13 15:27 UTC
usb: musb: Fix external abort in musb_remove on omap2430
2018-03-13 14:48 UTC
WARN_ON(irqs_disabled()) in dma_free_attrs?
2018-03-13 13:17 UTC
WARN_ON(irqs_disabled()) in dma_free_attrs?
2018-03-13 12:11 UTC
[RFC] usb: typec: tcpm: match source fixed pdo with sink variable pdo
2018-03-13 11:41 UTC
[v6] usb: core: Add "quirks" parameter for usbcore
2018-03-13 11:36 UTC
[RFC] usb: typec: tcpm: match source fixed pdo with sink variable pdo
2018-03-13 11:36 UTC
[v3,03/12] usb: typec: add fwnode to tcpc
2018-03-13 11:17 UTC
[v1,2/2] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-03-13 11:08 UTC
[v1,2/2] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-03-13 10:36 UTC
[v1,1/2] dt-bindings: usb: Update documentation for Qualcomm DWC3 driver
2018-03-13 10:36 UTC
[2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()
2018-03-13 10:26 UTC
[v2] usb: core: introduce per-port over-current counters
2018-03-13 10:20 UTC
[v3,12/12] staging: typec: tcpci: move tcpci driver out of staging
2018-03-13 9:34 UTC
[v3,11/12] staging: typec: tcpci: Only touch target bit when enable vconn
2018-03-13 9:34 UTC
[v3,10/12] staging: typec: tcpci: keep the not connecting cc line open
2018-03-13 9:34 UTC
[v3,09/12] typec: tcpm: add starting value for drp toggling
2018-03-13 9:34 UTC
[v3,08/12] staging: typec: tcpci: enable vbus detection
2018-03-13 9:34 UTC
[v3,07/12] staging: typec: tcpci: register port before request irq
2018-03-13 9:34 UTC
[v3,06/12] staging: typec: tcpci: support port config passed via dt
2018-03-13 9:34 UTC
[v3,05/12] usb: typec: add API to get sink and source config
2018-03-13 9:34 UTC
[v3,04/12] usb: typec: add API to get typec basic port power and data config
2018-03-13 9:34 UTC
[v3,03/12] usb: typec: add fwnode to tcpc
2018-03-13 9:34 UTC
[v3,02/12] dt-bindings: usb: add documentation for typec port controller(TCPCI)
2018-03-13 9:34 UTC
[v3,01/12] dt-bindings: connector: add properties for typec
2018-03-13 9:34 UTC
[v4,13/15] usb: dwc3: Add workaround for isoc start transfer failure
2018-03-13 8:45 UTC
[v4,02/15] usb: core: urb: Check SSP isoc ep comp descriptor
2018-03-13 8:30 UTC
[v6] usb: core: Add "quirks" parameter for usbcore
2018-03-13 7:26 UTC
[2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()
2018-03-13 7:24 UTC
[3/4] usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
2018-03-13 6:15 UTC
[v4,01/15] usb: dwc3: Add SoftReset PHY synchonization delay
2018-03-13 1:00 UTC
[RFC] usb: typec: tcpm: match source fixed pdo with sink variable pdo
2018-03-13 0:02 UTC
[v4,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-12 22:35 UTC
[v2] usb: musb: Fix external abort in musb_remove on omap2430
2018-03-12 22:30 UTC
[11/11] usb: dwc2: Enable LPM
2018-03-12 16:38 UTC
net: drivers/net: Remove unnecessary skb_copy_expand OOM messages
2018-03-12 15:07 UTC
[v7,12/12] extcon: axp288: Set USB role where necessary
2018-03-12 14:34 UTC
[v7,11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port
2018-03-12 14:34 UTC
[v7,10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
2018-03-12 14:34 UTC
[v7,09/12] usb: roles: Add Intel xHCI USB role switch driver
2018-03-12 14:34 UTC
[v7,08/12] xhci: Add Intel extended cap / otg phy mux handling
2018-03-12 14:34 UTC
[v7,07/12] xhci: Add option to get next extended capability in list by passing id = 0
2018-03-12 14:34 UTC
[v7,06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
2018-03-12 14:34 UTC
[v7,05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
2018-03-12 14:34 UTC
[v7,04/12] usb: typec: Separate the definitions for data and power roles
2018-03-12 14:34 UTC
[v7,03/12] usb: common: Small class for USB role switches
2018-03-12 14:34 UTC
[v7,02/12] usb: typec: API for controlling USB Type-C Multiplexers
2018-03-12 14:34 UTC
[v7,01/12] drivers: base: Unified device connection lookup
2018-03-12 14:34 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 14:12 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 13:39 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 13:33 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 13:16 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 13:06 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 12:59 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 12:47 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 12:12 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 12:02 UTC
staging: typec: modify parameter of tcpci_irq
2018-03-12 11:55 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 11:55 UTC
Fixes: 8f9439022648("staging: typec: modify parameter of tcpci_irq")
2018-03-12 11:43 UTC
Fixes: 8f9439022648("staging: typec: modify parameter of tcpci_irq")
2018-03-12 11:26 UTC
Fixes: 8f9439022648("staging: typec: modify parameter of tcpci_irq")
2018-03-12 11:07 UTC
usb: typec: Separate the definitions for data and power roles
2018-03-12 11:06 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-12 10:41 UTC
[2/2] USB: serial: option: use mass-storage class define
2018-03-12 10:34 UTC
USB: serial: option: reimplement interface masking
2018-03-12 10:32 UTC
[v4,01/15] usb: dwc3: Add SoftReset PHY synchonization delay
2018-03-12 10:23 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-12 10:22 UTC
[2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()
2018-03-12 10:03 UTC
Fixes: 8f9439022648("staging: typec: modify parameter of tcpci_irq")
2018-03-12 9:46 UTC
[v6,01/12] drivers: base: Unified device connection lookup
2018-03-12 9:24 UTC
[v6,01/12] drivers: base: Unified device connection lookup
2018-03-12 9:19 UTC
usb: typec: Separate the definitions for data and power roles
2018-03-12 8:27 UTC
[v6,01/12] drivers: base: Unified device connection lookup
2018-03-12 8:13 UTC
[v7] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-12 7:13 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-12 7:06 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-12 7:02 UTC
[v7] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-12 6:57 UTC
[v7] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-12 5:58 UTC
[v2,3/3] dt-bindings: phy-mtk-tphy: add properties for U2 slew rate calibrate
2018-03-12 5:25 UTC
[v2,2/3] phy: phy-mtk-tphy: add configurable parameters for slew rate calibrate
2018-03-12 5:25 UTC
[v2,1/3] phy: phy-mtk-tphy: keep default value of mcu_bus_ck_gate_en
2018-03-12 5:25 UTC
[v7] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-12 5:22 UTC
[v7] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-12 4:33 UTC
[3/3] phy: phy-mtk-tphy: add properties for U2 slew rate calibrate
2018-03-12 3:39 UTC
[2/3] phy: phy-mtk-tphy: add configurable parameters for slew rate calibrate
2018-03-12 3:39 UTC
[1/3] phy: phy-mtk-tphy: keep default value of mcu_bus_ck_gate_en
2018-03-12 3:39 UTC
[v5,0/6] dt-bindings: add bindings for USB physical connector
2018-03-12 1:29 UTC
[v6,01/12] drivers: base: Unified device connection lookup
2018-03-11 18:24 UTC
WARN_ON(irqs_disabled()) in dma_free_attrs?
2018-03-11 18:01 UTC
[1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()
2018-03-10 18:48 UTC
[1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()
2018-03-10 18:41 UTC
[2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()
2018-03-10 18:26 UTC
[1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()
2018-03-10 18:24 UTC
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
2018-03-09 18:31 UTC
[v6,01/12] drivers: base: Unified device connection lookup
2018-03-09 17:53 UTC
usb: typec: Separate the definitions for data and power roles
2018-03-09 17:41 UTC
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
2018-03-09 17:34 UTC
[v1,11/14] USB: host: sl811: Re-use DEFINE_SHOW_ATTRIBUTE() macro
2018-03-09 17:32 UTC
[v7] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-09 17:22 UTC
[v2] usb: core: introduce per-port over-current counters
2018-03-09 17:19 UTC
[3/4] usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
2018-03-09 17:07 UTC
[4/4] xhci: Fix front USB ports on ASUS PRIME B350M-A
2018-03-09 17:06 UTC
usb: typec: Separate the definitions for data and power roles
2018-03-09 17:05 UTC
[RFC,v2,3/3] usb: typec: tcpm: Support for Alternate Modes
2018-03-09 15:19 UTC
[RFC,v2,2/3] usb: typec: Bus type for alternate modes
2018-03-09 15:19 UTC
[RFC,v2,1/3] usb: typec: Register a device for every mode
2018-03-09 15:19 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-09 14:52 UTC
[v2] usb: musb: Fix external abort in musb_remove on omap2430
2018-03-09 14:11 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-09 13:42 UTC
usb: musb: Fix external abort in musb_remove
2018-03-09 13:39 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-09 13:10 UTC
[11/11] usb: dwc2: Enable LPM
2018-03-09 13:05 UTC
[v2] usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 12:47 UTC
[2/3] usb: xhci: tegra: Add runtime PM support
2018-03-09 11:19 UTC
[2/3] usb: xhci: tegra: Add runtime PM support
2018-03-09 11:13 UTC
usb: typec: Separate the definitions for data and power roles
2018-03-09 11:09 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 10:39 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 10:36 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).