messages from 2018-03-04 18:32:52 to 2018-03-12 03:39:06 UTC [more...]
[1/3] phy: phy-mtk-tphy: keep default value of mcu_bus_ck_gate_en
2018-03-12 3:39 UTC
[v5,0/6] dt-bindings: add bindings for USB physical connector
2018-03-12 1:29 UTC
[v6,01/12] drivers: base: Unified device connection lookup
2018-03-11 18:24 UTC
WARN_ON(irqs_disabled()) in dma_free_attrs?
2018-03-11 18:01 UTC
[1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()
2018-03-10 18:48 UTC
[1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()
2018-03-10 18:41 UTC
[2/2] net/usb/ax88179_178a: Delete three unnecessary variables in ax88179_chk_eee()
2018-03-10 18:26 UTC
[1/2] net/usb/ax88179_178a: Use common code in ax88179_chk_eee()
2018-03-10 18:24 UTC
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
2018-03-09 18:31 UTC
[v6,01/12] drivers: base: Unified device connection lookup
2018-03-09 17:53 UTC
usb: typec: Separate the definitions for data and power roles
2018-03-09 17:41 UTC
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
2018-03-09 17:34 UTC
[v1,11/14] USB: host: sl811: Re-use DEFINE_SHOW_ATTRIBUTE() macro
2018-03-09 17:32 UTC
[v7] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-09 17:22 UTC
[v2] usb: core: introduce per-port over-current counters
2018-03-09 17:19 UTC
[3/4] usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
2018-03-09 17:07 UTC
[4/4] xhci: Fix front USB ports on ASUS PRIME B350M-A
2018-03-09 17:06 UTC
usb: typec: Separate the definitions for data and power roles
2018-03-09 17:05 UTC
[RFC,v2,3/3] usb: typec: tcpm: Support for Alternate Modes
2018-03-09 15:19 UTC
[RFC,v2,2/3] usb: typec: Bus type for alternate modes
2018-03-09 15:19 UTC
[RFC,v2,1/3] usb: typec: Register a device for every mode
2018-03-09 15:19 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-09 14:52 UTC
[v2] usb: musb: Fix external abort in musb_remove on omap2430
2018-03-09 14:11 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-09 13:42 UTC
usb: musb: Fix external abort in musb_remove
2018-03-09 13:39 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-09 13:10 UTC
[11/11] usb: dwc2: Enable LPM
2018-03-09 13:05 UTC
[v2] usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 12:47 UTC
[2/3] usb: xhci: tegra: Add runtime PM support
2018-03-09 11:19 UTC
[2/3] usb: xhci: tegra: Add runtime PM support
2018-03-09 11:13 UTC
usb: typec: Separate the definitions for data and power roles
2018-03-09 11:09 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 10:39 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 10:36 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-09 10:24 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 9:49 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-09 9:44 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 9:26 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 9:23 UTC
[v4,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-09 9:20 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-09 9:19 UTC
[2/3] usb: xhci: tegra: Add runtime PM support
2018-03-09 9:13 UTC
usb: dwc2: Print error if unable to set DMA coherent mask
2018-03-09 9:10 UTC
[v1,10/14] usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()
2018-03-09 9:07 UTC
[2/4] usb: dwc3: add dwc3 glue layer for UniPhier SoCs
2018-03-09 9:04 UTC
usb: dwc3: core: power on PHYs before initializing core
2018-03-09 9:01 UTC
usb: dwc3: core: power on PHYs before initializing core
2018-03-09 8:54 UTC
[4.16,REGRESSION,fix] Revert "typec: tcpm: Only request matching pdos"
2018-03-09 8:47 UTC
[2/3] usb: xhci: tegra: Add runtime PM support
2018-03-09 8:36 UTC
[11/11] usb: dwc2: Enable LPM
2018-03-09 8:06 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-09 7:34 UTC
usb: Read text within supplied buffer size
2018-03-09 6:21 UTC
[v2] usb: Remove stack VLA usage
2018-03-09 6:11 UTC
[3/4] usb: Remove stack VLA usage
2018-03-09 6:05 UTC
[3/4] usb: Remove stack VLA usage
2018-03-09 5:55 UTC
[4/4] xhci: Fix front USB ports on ASUS PRIME B350M-A
2018-03-09 3:29 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-09 2:37 UTC
[3/4] usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
2018-03-09 1:48 UTC
[v1,1/1] USB: serial: Add boundry check for read_urbs array access
2018-03-09 0:34 UTC
[v1,1/1] USB: serial: Add boundry check for read_urbs array access
2018-03-08 23:43 UTC
[v1,1/1] USB: serial: Add boundry check for read_urbs array access
2018-03-08 23:29 UTC
[v2] usb: musb: Fix external abort in musb_remove on omap2430
2018-03-08 22:19 UTC
usb: musb: Fix external abort in musb_remove
2018-03-08 22:17 UTC
[2/3] usb: xhci: tegra: Add runtime PM support
2018-03-08 21:31 UTC
usb: musb: Fix external abort in musb_remove
2018-03-08 21:18 UTC
usb: musb: Fix external abort in musb_remove
2018-03-08 21:15 UTC
usb: musb: Fix external abort in musb_remove
2018-03-08 20:40 UTC
[RFC] usb: musb: Fix external abort in musb_remove
2018-03-08 18:22 UTC
USB: serial: cp210x: add ELDAT Easywave RX09 id
2018-03-08 18:06 UTC
[RFC] usb: musb: Fix external abort in musb_remove
2018-03-08 18:00 UTC
usb: dwc2: Print error if unable to set DMA coherent mask
2018-03-08 17:31 UTC
[4/4] xhci: Fix front USB ports on ASUS PRIME B350M-A
2018-03-08 17:06 UTC
[3/4] usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
2018-03-08 17:06 UTC
usb: dwc3: core: power on PHYs before initializing core
2018-03-08 16:49 UTC
[RFC] usb: musb: Fix external abort in musb_remove
2018-03-08 16:46 UTC
[PATCHv3] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-08 16:06 UTC
[4/4] xhci: Fix front USB ports on ASUS PRIME B350M-A
2018-03-08 15:17 UTC
[3/4] usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
2018-03-08 15:17 UTC
[2/4] usb: xhci: dbc: Fix lockdep warning
2018-03-08 15:17 UTC
[1/4] xhci: fix endpoint context tracer output
2018-03-08 15:17 UTC
[v1,1/1] USB: serial: Add boundry check for read_urbs array access
2018-03-08 14:01 UTC
[v2] xhci: Fix front USB ports on ASUS PRIME B350M-A
2018-03-08 13:14 UTC
[v2,2/2] usb: dwc3: add dual role support using OTG block
2018-03-08 13:12 UTC
[v2,2/2] usb: dwc3: add dual role support using OTG block
2018-03-08 12:31 UTC
[v2,2/2] net: usb: asix88179_178a: de-duplicate code
2018-03-08 11:19 UTC
[v2,1/2] net: usb: asix88179_178a: set permanent address once only
2018-03-08 11:19 UTC
usb: dwc3: core: power on PHYs before initializing core
2018-03-08 10:43 UTC
[v2,2/2] usb: dwc3: add dual role support using OTG block
2018-03-08 10:39 UTC
[RFC] usb: hcd: complete URBs in threaded-IRQ context instead of tasklet
2018-03-08 9:57 UTC
[RFC] usb: musb: Fix external abort in musb_remove
2018-03-08 9:31 UTC
[v5,2/3] USB3/DWC3: Add property "snps,incr-burst-type-adjustment" for INCR burst type
2018-03-08 8:58 UTC
[v1,1/1] USB: serial: Add boundry check for read_urbs array access
2018-03-08 8:54 UTC
[PATCHv3] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-08 8:22 UTC
[v5] usb: core: Add "quirks" parameter for usbcore
2018-03-08 5:37 UTC
[AUTOSEL,for,4.4,001/101] usb: dwc2: Make sure we disconnect the gadget state
2018-03-08 5:01 UTC
[AUTOSEL,for,4.9,002/190] usb: dwc2: Make sure we disconnect the gadget state
2018-03-08 4:58 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-08 1:41 UTC
[v5,2/3] USB3/DWC3: Add property "snps,incr-burst-type-adjustment" for INCR burst type
2018-03-08 1:37 UTC
[v5,3/3] USB3/DWC3: Enable undefined length INCR burst type
2018-03-08 1:35 UTC
[v1,1/1] USB: serial: Add boundry check for read_urbs array access
2018-03-07 21:41 UTC
[v1,1/1] USB: serial: Add boundry check for read_urbs array access
2018-03-07 20:58 UTC
[3/3] usbip: tools: change to use new error codes in server reply messages
2018-03-07 20:42 UTC
[2/3] usbip: usbip_host_common: Use new error codes to return request status
2018-03-07 20:42 UTC
[1/3] usbip: tools: add more error codes for usbip request/reply messages
2018-03-07 20:42 UTC
[net-next,2/2] net: cdc_eem: clean up bind error path
2018-03-07 20:39 UTC
[net-next,1/2] net: kalmia: clean up bind error path
2018-03-07 20:39 UTC
[v1,1/1] USB: serial: Add boundry check for read_urbs array access
2018-03-07 20:23 UTC
USB: serial: option: reimplement interface masking
2018-03-07 19:54 UTC
[v2] usb: isp1760: Use kasprintf
2018-03-07 19:16 UTC
[v2] usb: isp1760: Use kasprintf
2018-03-07 18:38 UTC
usb: isp1760: Use kasprintf
2018-03-07 18:30 UTC
usb: isp1760: Use kasprintf
2018-03-07 18:20 UTC
usb: isp1760: Use kasprintf
2018-03-07 18:08 UTC
[net] net: usbnet: fix potential deadlock on 32bit hosts
2018-03-07 16:47 UTC
USB: serial: option: reimplement interface masking
2018-03-07 16:40 UTC
[Regression] xhci: some hard drives cannot be seen using a JMicron JMS56x enclosure
2018-03-07 15:16 UTC
[media] cpia2_usb: drop bogus interface-release call
2018-03-07 14:57 UTC
[2/2] USB: serial: option: use mass-storage class define
2018-03-07 14:57 UTC
[1/2] USB: serial: option: drop redundant interface-class test
2018-03-07 14:56 UTC
[net-next,2/2] net: cdc_eem: clean up bind error path
2018-03-07 14:56 UTC
[net-next,1/2] net: kalmia: clean up bind error path
2018-03-07 14:56 UTC
[PATCHv3] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-07 14:56 UTC
[2/2] USB: serial: option: use mass-storage class define
2018-03-07 10:49 UTC
[1/2] USB: serial: option: drop redundant interface-class test
2018-03-07 10:49 UTC
[net-next,2/2] net: cdc_eem: clean up bind error path
2018-03-07 10:30 UTC
[media] cpia2_usb: drop bogus interface-release call
2018-03-07 9:49 UTC
[net-next,2/2] net: cdc_eem: clean up bind error path
2018-03-07 9:46 UTC
[net-next,1/2] net: kalmia: clean up bind error path
2018-03-07 9:46 UTC
[v2] xhci: Fix front USB ports on ASUS PRIME B350M-A
2018-03-07 6:09 UTC
usb: gadget: udc: bdc: Use dma_pool_zalloc
2018-03-06 18:05 UTC
[v5,4/6] arm64: dts: exynos: add OF graph between MHL and USB connector
2018-03-06 16:49 UTC
[v5,3/6] arm64: dts: exynos: add micro-USB connector node to TM2 platforms
2018-03-06 16:49 UTC
uas: fix comparison for error code
2018-03-06 14:52 UTC
[v4,1/2] dt-bindings: usb: ehci: add optional external vbus supply property
2018-03-06 14:40 UTC
[v4,1/2] dt-bindings: usb: ehci: add optional external vbus supply property
2018-03-06 14:09 UTC
uas: fix comparison for error code
2018-03-06 14:04 UTC
[4.16,REGRESSION,fix] Revert "typec: tcpm: Only request matching pdos"
2018-03-06 12:32 UTC
[4.16,REGRESSION,fix] Revert "typec: tcpm: Only request matching pdos"
2018-03-06 12:04 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-06 12:02 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-06 11:54 UTC
[4.16,REGRESSION,fix] Revert "typec: tcpm: Only request matching pdos"
2018-03-06 9:56 UTC
[4.16,REGRESSION,fix] Revert "typec: tcpm: Only request matching pdos"
2018-03-06 9:50 UTC
[2/2] usb: gadget: udc: renesas_usb3: add binging for r8a77965
2018-03-06 9:40 UTC
[1/2] usb: renesas_usbhs: add binding for r8a77965
2018-03-06 9:40 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-06 9:38 UTC
usb: host: xhci-rcar: add support for r8a77965
2018-03-06 9:38 UTC
[v5,3/3] USB3/DWC3: Enable undefined length INCR burst type
2018-03-06 8:59 UTC
[v5,2/3] USB3/DWC3: Add property "snps,incr-burst-type-adjustment" for INCR burst type
2018-03-06 8:59 UTC
[v5,1/3] USB3/DWC3: Add definition for global soc bus configuration register
2018-03-06 8:59 UTC
[resend] usb: quirks: add control message delay for 1b1c:1b20
2018-03-06 8:38 UTC
USB: serial: cp210x: add ELDAT Easywave RX09 id
2018-03-06 8:32 UTC
[v4,1/2] dt-bindings: usb: ehci: add optional external vbus supply property
2018-03-06 1:57 UTC
[PATCHv2] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-06 1:53 UTC
[v7] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-06 1:50 UTC
[1/1] usb: host: xhci: do not return error status for URB
2018-03-06 0:46 UTC
[2/2] usb: gadget: udc: renesas_usb3: add binging for r8a77965
2018-03-05 22:17 UTC
[1/2] usb: renesas_usbhs: add binding for r8a77965
2018-03-05 22:16 UTC
usb: host: xhci-rcar: add support for r8a77965
2018-03-05 22:15 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-05 22:14 UTC
[net] net: usbnet: fix potential deadlock on 32bit hosts
2018-03-05 19:41 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-03-05 19:09 UTC
[v2,1/1] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-03-05 18:57 UTC
[v2,1/1] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-03-05 18:35 UTC
[v2,1/1] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-03-05 17:38 UTC
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-03-05 17:35 UTC
[RFC] cdc-acm: do not drop data from fast devices
2018-03-05 16:04 UTC
[v6] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-05 15:16 UTC
[v6] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-05 14:49 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 12:38 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 12:25 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-03-05 11:46 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 11:30 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:27 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:25 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:25 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:14 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:06 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 11:03 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 10:41 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 10:35 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-05 10:27 UTC
[v2,1/1] usb: xhci: do not create and register shared_hcd when USB3.0 is disabled
2018-03-05 10:22 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 9:59 UTC
[RFC] cdc-acm: do not drop data from fast devices
2018-03-05 9:55 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 9:53 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 9:45 UTC
[v2,03/12] staging: typec: tcpci: support port config passed via dt
2018-03-05 8:53 UTC
[v2] usb: phy: mxs: Fix NULL pointer dereference on i.MX23/28
2018-03-05 8:51 UTC
usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-03-05 8:49 UTC
[v2,02/12] usb: typec: add API to get sink and source config
2018-03-05 8:40 UTC
[usb-next,v11,5/8] usb: host: xhci-mtk: remove custom USB PHY handling
2018-03-05 8:31 UTC
[v5,1/6] dt-bindings: add bindings for USB physical connector
2018-03-05 8:18 UTC
[v2,01/12] usb: typec: add API to get port type and preferred role
2018-03-05 7:54 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 7:52 UTC
inconsistent lock state with usbnet/asix usb ethernet and xhci
2018-03-05 7:45 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 7:07 UTC
[v2,10/12] dt-bindings: connector: add properties for typec power delivery
2018-03-05 7:00 UTC
usb: clarify ACPI spec version and section number for _UPC & _PLD
2018-03-05 5:57 UTC
[v6] staging: typec: handle vendor defined part and modify drp toggling flow
2018-03-05 4:16 UTC
WARN_ON(irqs_disabled()) in dma_free_attrs?
2018-03-05 2:05 UTC
[2/2] net: usb: asix88179_178a: de-duplicate code
2018-03-04 18:32 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).