messages from 2018-03-24 17:40:27 to 2018-04-04 07:06:34 UTC [more...]
Driver for MaxLinear/Exar USB (UART) Serial adapters
2018-04-04 7:06 UTC
usb: dwc3: of-simple: use managed and shared reset control
2018-04-04 1:25 UTC
[v2] lan78xx: Connect phy early
2018-04-03 22:19 UTC
[4.4,068/134] usb: dwc2: Make sure we disconnect the gadget state
2018-04-03 17:41 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-03 15:56 UTC
[v2,2/5] usb: typec: fusb302: remove max_snk_* for sink config
2018-04-03 15:25 UTC
[v2,1/5] usb: typec: tcpm: pdo matching optimization
2018-04-03 15:17 UTC
usbip: vhci_hcd: Fix usb device and sockfd leaks
2018-04-03 13:54 UTC
[v1] usb: dwc2: Fix kernel doc's warnings
2018-04-03 13:25 UTC
[v2] usb: dwc2: Fix kernel doc's warnings
2018-04-03 13:15 UTC
[v1] usb: dwc2: Fix kernel doc's warnings
2018-04-03 13:10 UTC
[v1] usb: dwc2: Fix kernel doc's warnings
2018-04-03 12:41 UTC
[v1] usb: dwc2: Fix kernel doc's warnings
2018-04-03 11:28 UTC
[2/2] usb: dwc2: gadget: Change default values
2018-04-03 11:22 UTC
[1/2] usb: dwc2: gadget: Fix coverity issue
2018-04-03 11:22 UTC
usb: dwc3: of-simple: use managed and shared reset control
2018-04-03 10:35 UTC
usb: dwc3: of-simple: use managed and shared reset control
2018-04-03 10:19 UTC
usb: musb: Support gadget mode when the port is set to dual role
2018-04-03 9:29 UTC
usb: dwc3: of-simple: use managed and shared reset control
2018-04-03 8:46 UTC
usb: dwc3: of-simple: use managed and shared reset control
2018-04-03 8:30 UTC
[v4,01/13] dt-bindings: connector: add properties for typec
2018-04-03 8:29 UTC
usb: dwc3: of-simple: use managed and shared reset control
2018-04-03 8:00 UTC
usbip: vhci_hcd: Fix usb device and sockfd leaks
2018-04-03 6:56 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-03 6:56 UTC
usb: gadget: udc-xilinx: Add clock support
2018-04-03 6:28 UTC
usb: serial: option: add HP LT4220 support
2018-04-03 2:34 UTC
usbip: vhci_hcd: Fix usb device and sockfd leaks
2018-04-02 20:52 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-02 20:52 UTC
usb: core: phy: Fix usb_phy_roothub_add_phy if GENERIC_PHY=n
2018-04-02 20:27 UTC
[v3,2/2] net: usb: asix88179_178a: de-duplicate code
2018-04-02 20:25 UTC
[v3,2/2] net: usb: asix88179_178a: de-duplicate code
2018-04-02 19:06 UTC
[v3,2/2] net: usb: asix88179_178a: de-duplicate code
2018-04-02 15:21 UTC
[v3,2/2] net: usb: asix88179_178a: de-duplicate code
2018-04-02 14:14 UTC
[4/4] usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udc
2018-04-02 12:21 UTC
[3/4] usb: gadget: udc: renesas_usb3: should call pm_runtime_enable() before add udc
2018-04-02 12:21 UTC
[2/4] usb: gadget: udc: renesas_usb3: should remove debugfs
2018-04-02 12:21 UTC
[1/4] usb: gadget: udc: renesas_usb3: fix double phy_put()
2018-04-02 12:21 UTC
[v3,2/2] net: usb: asix88179_178a: de-duplicate code
2018-04-02 9:45 UTC
[v3,2/2] net: usb: asix88179_178a: de-duplicate code
2018-04-02 7:43 UTC
[v3,1/2] net: usb: asix88179_178a: set permanent address once only
2018-04-02 7:43 UTC
[v2,2/2] net: usb: asix88179_178a: de-duplicate code
2018-04-01 18:05 UTC
[4.4,068/134] usb: dwc2: Make sure we disconnect the gadget state
2018-04-01 15:49 UTC
usb: core: phy: Fix usb_phy_roothub_add_phy if GENERIC_PHY=n
2018-03-31 20:12 UTC
usb: core: phy: Fix usb_phy_roothub_add_phy if GENERIC_PHY=n
2018-03-31 19:28 UTC
usb: gadget: f_fs: Add compat_ioctl to epfiles
2018-03-31 18:41 UTC
[v2,2/2] net: usb: asix88179_178a: de-duplicate code
2018-03-31 12:16 UTC
[v4,07/13] staging: typec: tcpci: register port before request irq
2018-03-31 8:01 UTC
[v4,11/13] staging: typec: tcpci: keep the not connecting cc line open
2018-03-31 4:49 UTC
[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
2018-03-31 4:38 UTC
[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
2018-03-31 3:37 UTC
[v4,01/13] dt-bindings: connector: add properties for typec
2018-03-31 3:34 UTC
[v4,04/13] usb: typec: add fwnode to tcpc
2018-03-31 3:17 UTC
[v4,07/13] staging: typec: tcpci: register port before request irq
2018-03-31 3:09 UTC
usb: gadget: f_midi: Use refcount when freeing f_midi_opts
2018-03-31 0:54 UTC
usb: gadget: f_fs: Add compat_ioctl to epfiles
2018-03-30 22:32 UTC
[v4,11/13] staging: typec: tcpci: keep the not connecting cc line open
2018-03-30 15:15 UTC
[-next] usb: dwc2: pci: Fix error return code in dwc2_pci_probe()
2018-03-30 7:35 UTC
[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
2018-03-29 22:49 UTC
[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
2018-03-29 21:18 UTC
[v4,01/13] dt-bindings: connector: add properties for typec
2018-03-29 19:54 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-29 19:44 UTC
usb: musb: gadget: misplaced out of bounds check
2018-03-29 16:51 UTC
usb: musb: gadget: misplaced out of bounds check
2018-03-29 16:36 UTC
usb: musb: gadget: misplaced out of bounds check
2018-03-29 15:48 UTC
[v2,3/3] usb: dwc2: Add High Bandwidth ISOC OUT support
2018-03-29 14:29 UTC
[v2,2/3] usb: dwc2: Change ISOC DDMA flow
2018-03-29 14:28 UTC
[v2,1/3] usb: dwc2: Enable BNA interrupt for IN endpoints
2018-03-29 14:28 UTC
[v4,04/13] usb: typec: add fwnode to tcpc
2018-03-29 12:57 UTC
Sorry, Patch wrong (was: patch "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870" added to usb-testing)
2018-03-29 12:39 UTC
Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
2018-03-29 12:35 UTC
usb: musb: Support gadget mode when the port is set to dual role
2018-03-29 11:57 UTC
Sorry, Patch wrong (was: patch "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870" added to usb-testing)
2018-03-29 11:49 UTC
[v4,07/13] staging: typec: tcpci: register port before request irq
2018-03-29 10:52 UTC
[5/5] usb: chipidea: imx: Fix ULPI on imx53
2018-03-29 9:52 UTC
[4/5] usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
2018-03-29 9:52 UTC
[3/5] usb: chipidea: usbmisc: small clean up
2018-03-29 9:52 UTC
[2/5] usb: chipidea: usbmisc: evdo can be set e/o reset
2018-03-29 9:52 UTC
[1/5] usb: chipidea: usbmisc: evdo is only specific to OTG port
2018-03-29 9:52 UTC
usb: musb: Support gadget mode when the port is set to dual role
2018-03-29 9:23 UTC
usb: chipidea: Don't select EXTCON
2018-03-29 9:05 UTC
ftdi_sio: add Id for Physik Instrumente E-870
2018-03-29 8:34 UTC
ftdi_sio: add Id for Physik Instrumente E-870
2018-03-29 6:39 UTC
usb: dwc3: of-simple: use managed and shared reset control
2018-03-29 6:07 UTC
[2/2] usb: dwc3: add clock and resets
2018-03-29 4:32 UTC
[v4,2/2] dt-bindings: usb: rt1711h device tree binding document
2018-03-29 3:09 UTC
[v8,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-29 2:56 UTC
[v8,1/2] usb/gadget: Constify usb_gadget_get_string "table" argument
2018-03-29 2:56 UTC
[-next] usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static
2018-03-29 2:20 UTC
[-next] usb: roles: Fix potential NULL dereference in intel_xhci_usb_probe()
2018-03-29 2:14 UTC
[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
2018-03-28 23:19 UTC
[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-28 23:10 UTC
[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-28 22:26 UTC
[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-28 22:19 UTC
usb: musb: Support gadget mode when the port is set to dual role
2018-03-28 21:52 UTC
Yet another entry for the FTDI serial USB
2018-03-28 18:09 UTC
[v4,13/13] staging: typec: tcpci: move tcpci driver out of staging
2018-03-28 16:06 UTC
[v4,12/13] staging: typec: tcpci: Only touch target bit when enable vconn
2018-03-28 16:06 UTC
[v4,11/13] staging: typec: tcpci: keep the not connecting cc line open
2018-03-28 16:06 UTC
[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
2018-03-28 16:06 UTC
[v4,09/13] typec: tcpm: add starting value for drp toggling
2018-03-28 16:06 UTC
[v4,08/13] staging: typec: tcpci: enable vbus detection
2018-03-28 16:06 UTC
[v4,07/13] staging: typec: tcpci: register port before request irq
2018-03-28 16:06 UTC
[v4,06/13] usb: typec: tcpm: support get typec and pd config from device properties
2018-03-28 16:06 UTC
[v4,05/13] usb: typec: add API to get typec basic port power and data config
2018-03-28 16:06 UTC
[v4,04/13] usb: typec: add fwnode to tcpc
2018-03-28 16:06 UTC
[v4,03/13] staging: typec: tcpci: add compatible string for nxp ptn5110
2018-03-28 16:06 UTC
[v4,02/13] dt-bindings: usb: add documentation for typec port controller(TCPCI)
2018-03-28 16:06 UTC
[v4,01/13] dt-bindings: connector: add properties for typec
2018-03-28 16:06 UTC
[-next] usb: dwc2: pci: Fix error return code in dwc2_pci_probe()
2018-03-28 13:41 UTC
Yet another entry for the FTDI serial USB
2018-03-28 13:20 UTC
[v2,1/1] usb: xhci: do not create and register shared_hcd when USB3.0 is disabled
2018-03-28 9:53 UTC
[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
2018-03-28 7:43 UTC
usb: gadget: udc: core: Document the relation between usb_ep_queue() and completion callback
2018-03-28 7:40 UTC
[usb-next,v4,2/2] usb: core: use phy_exit during suspend if wake up is not supported
2018-03-27 21:26 UTC
[usb-next,v4,1/2] usb: core: split usb_phy_roothub_{init,alloc}
2018-03-27 21:26 UTC
[v6] usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
2018-03-27 17:06 UTC
[v4,2/2] dt-bindings: usb: rt1711h device tree binding document
2018-03-27 14:30 UTC
usb: gadget: udc: core: Document the relation between usb_ep_queue() and completion callback
2018-03-27 14:27 UTC
[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
2018-03-27 14:13 UTC
[v2,2/2] usb: dwc3: gadget: Correct the logic for queuing sgs
2018-03-27 11:05 UTC
[v2,1/2] usb: dwc3: gadget: Correct handling of scattergather lists
2018-03-27 11:05 UTC
[RFC,usb-next,v3,1/2] usb: core: split usb_phy_roothub_{init,alloc}
2018-03-27 9:00 UTC
[RFC,usb-next,v3,2/2] usb: core: use phy_exit during suspend if wake up is not supported
2018-03-27 8:24 UTC
[RFC,usb-next,v3,1/2] usb: core: split usb_phy_roothub_{init,alloc}
2018-03-27 8:24 UTC
[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-27 7:57 UTC
[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-27 7:30 UTC
[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
2018-03-27 6:59 UTC
[RFC,usb-next,v3,2/2] usb: core: use phy_exit during suspend if wake up is not supported
2018-03-27 3:20 UTC
[RFC,usb-next,v3,1/2] usb: core: split usb_phy_roothub_{init,alloc}
2018-03-27 3:19 UTC
[usb-next,v1] usb: core: phy: fix return value of usb_phy_roothub_exit()
2018-03-27 0:58 UTC
[RFC,usb-next,v2,1/2] usb: core: split usb_phy_roothub_{init,alloc}
2018-03-27 0:50 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-27 0:45 UTC
[v2,3/5] dt-bindings: usb: fusb302: remove max-sink-* properties
2018-03-26 22:25 UTC
[v4,2/2] dt-bindings: usb: rt1711h device tree binding document
2018-03-26 22:23 UTC
[RFC,usb-next,v3,2/2] usb: core: use phy_exit during suspend if wake up is not supported
2018-03-26 20:38 UTC
[RFC,usb-next,v3,1/2] usb: core: split usb_phy_roothub_{init,alloc}
2018-03-26 20:38 UTC
[RFC,usb-next,v2,1/2] usb: core: split usb_phy_roothub_{init,alloc}
2018-03-26 20:31 UTC
[usb-next,v1] usb: core: phy: fix return value of usb_phy_roothub_exit()
2018-03-26 20:12 UTC
usb: host: Remove the deprecated ATH79 USB host config options
2018-03-26 18:28 UTC
[v3] USB: announce bcdDevice as well as idVendor, idProduct
2018-03-26 18:27 UTC
[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
2018-03-26 17:44 UTC
[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
2018-03-26 17:32 UTC
[PATCHv2] net/usb/qmi_wwan.c: Add USB id for lt4120 modem
2018-03-26 16:56 UTC
net: qmi_wwan: add BroadMobi BM806U 2020:2033
2018-03-26 16:35 UTC
[4/4] drivers/net: Use octal not symbolic permissions
2018-03-26 16:08 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-26 15:16 UTC
[4/4] drivers/net: Use octal not symbolic permissions
2018-03-26 14:07 UTC
[v7,2/6] Documentation: power: Initial effort to document power_supply ABI
2018-03-26 12:50 UTC
[v7,2/6] Documentation: power: Initial effort to document power_supply ABI
2018-03-26 12:40 UTC
[Regression] xhci: some hard drives cannot be seen using a JMicron JMS56x enclosure
2018-03-26 12:27 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-03-26 11:51 UTC
[2/2] usb: dwc3: gadget: never call ->complete() from ->ep_queue()
2018-03-26 11:23 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-03-26 10:56 UTC
[2/2] usb: dwc3: gadget: never call ->complete() from ->ep_queue()
2018-03-26 10:14 UTC
[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
2018-03-26 10:14 UTC
usb: xhci-mtk: remove redundant MODULE_ALIAS entries
2018-03-26 10:03 UTC
[v7,2/6] Documentation: power: Initial effort to document power_supply ABI
2018-03-26 9:57 UTC
[RFC,usb-next,v2,1/2] usb: core: split usb_phy_roothub_{init,alloc}
2018-03-26 9:57 UTC
[RFC,usb-next,v2,2/2] usb: core: use phy_exit during suspend if wake up is not supported
2018-03-26 9:53 UTC
[v1,3/3] usb: dwc2: Add High Bandwidth ISOC OUT support
2018-03-26 9:25 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-03-26 9:00 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-26 7:54 UTC
[-next] usb: roles: Fix return value check in intel_xhci_usb_probe()
2018-03-26 7:47 UTC
[-next] usb: roles: Fix return value check in intel_xhci_usb_probe()
2018-03-26 6:43 UTC
[PATCHv2] net/usb/qmi_wwan.c: Add USB id for lt4120 modem
2018-03-26 5:19 UTC
[usb-next,v1] usb: core: phy: fix return value of usb_phy_roothub_exit()
2018-03-26 3:43 UTC
[RFC,usb-next,v2,1/2] usb: core: split usb_phy_roothub_{init,alloc}
2018-03-26 3:37 UTC
[RFC,usb-next,v2,2/2] usb: core: use phy_exit during suspend if wake up is not supported
2018-03-26 3:21 UTC
[v7,6/6] typec: tcpm: Add support for sink PPS related messages
2018-03-26 3:15 UTC
[v7,5/6] typec: tcpm: Represent source supply through power_supply
2018-03-26 3:14 UTC
[v7,1/6] typec: tcpm: Add core support for sink side PPS
2018-03-26 3:10 UTC
net/usb/qmi_wwan.c: Add USB id for lt4120 modem
2018-03-26 1:16 UTC
[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-26 0:32 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-26 0:30 UTC
[v6,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-26 0:25 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-26 0:22 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-25 22:55 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-25 20:52 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-25 18:58 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-25 15:45 UTC
[v6] usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
2018-03-25 15:25 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 14:39 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 14:14 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 13:26 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 12:52 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 12:38 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 12:31 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 11:57 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 11:51 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 10:48 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-03-25 10:37 UTC
[v6] usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
2018-03-25 2:03 UTC
[v6,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-03-25 1:25 UTC
[v6] usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
2018-03-25 1:21 UTC
usb: host: Remove the deprecated ATH79 USB host config options
2018-03-24 22:47 UTC
net: qmi_wwan: add BroadMobi BM806U 2020:2033
2018-03-24 21:08 UTC
[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
2018-03-24 20:02 UTC
usb: dwc3: gadget: Correct the logic for queuing sgs
2018-03-24 17:53 UTC
[v2] USB: announce bcdDevice as well as idVendor, idProduct
2018-03-24 17:43 UTC
[v3] USB: announce bcdDevice as well as idVendor, idProduct
2018-03-24 17:40 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).