messages from 2018-04-18 16:11:21 to 2018-04-24 21:29:09 UTC [more...]
[V2,2/4] usb: gadget: configfs: Create control_config group
2018-04-24 21:29 UTC
[v2,3/3] usb: gadget: uvc: disable stream when disconnected
2018-04-24 20:59 UTC
[v2,2/3] usb: gadget: uvc: remove delay usb status phase
2018-04-24 20:59 UTC
[v2,1/3] usb: gadget: uvc: synchronize streamon/off with uvc_function_set_alt
2018-04-24 20:59 UTC
[RFC,10/10] ARM: exynos: Remove support for Exynos5440
2018-04-24 20:32 UTC
[RFC,09/10] usb: host: exynos: Remove support for Exynos5440
2018-04-24 20:32 UTC
[RFC,08/10] spi: s3c64xx: samsung: Remove support for Exynos5440
2018-04-24 20:32 UTC
[RFC,07/10] pinctrl: samsung: Remove support for Exynos5440
2018-04-24 20:32 UTC
[RFC,06/10] thermal: samsung: Remove support for Exynos5440
2018-04-24 20:32 UTC
[RFC,05/10] i2c: s3c2410: Remove support for Exynos5440
2018-04-24 20:32 UTC
[RFC,04/10] clk: samsung: Remove support for Exynos5440
2018-04-24 20:32 UTC
[RFC,03/10] cpufreq: exynos: Remove support for Exynos5440
2018-04-24 20:32 UTC
[RFC,02/10] ata: ahci-platform: Remove support for Exynos5440
2018-04-24 20:32 UTC
[RFC,01/10] ARM: dts: exynos: Remove Exynos5440
2018-04-24 20:32 UTC
Request for information how to disable USB bulk endpoint transfer validation
2018-04-24 17:41 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-24 17:30 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-24 17:28 UTC
[PATCH/RFC,02/11] dt-bindings: usb: add usb role switch driver
2018-04-24 14:35 UTC
[PATCH/RFC,01/11] Documentation: of: Add device-connection-id property
2018-04-24 14:33 UTC
[v2] doc: usb: ci-hdrc-usb2: Add property "mux-controls"
2018-04-24 13:59 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-04-24 13:50 UTC
[1/2] usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
2018-04-24 13:45 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-04-24 13:32 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-04-24 13:24 UTC
usb: gadget: f_phonet: fix pn_net_xmit()'s return type
2018-04-24 13:18 UTC
usbnet: ipheth: fix ipheth_tx()'s return type
2018-04-24 13:17 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-04-24 13:15 UTC
[1/2] usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
2018-04-24 13:02 UTC
[v8,5/6] typec: tcpm: Represent source supply through power_supply
2018-04-24 12:47 UTC
[v8,4/6] power: supply: Add 'usb_type' property and supporting code
2018-04-24 12:46 UTC
[v8,3/6] power: supply: Add error checking of psy desc during registration
2018-04-24 12:42 UTC
[v8,2/6] Documentation: power: Initial effort to document power_supply ABI
2018-04-24 12:40 UTC
[PATCH/RFC,04/11] of: platform: add device connection parsing
2018-04-24 12:33 UTC
[1/2] usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
2018-04-24 11:46 UTC
[2/2] usb: dwc2: fix isoc split in transfer with no data
2018-04-24 9:04 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-24 8:58 UTC
usb: always build usb/common/ targets; fixes extcon-axp288 build error
2018-04-24 8:48 UTC
[2/2] usb: dwc2: fix isoc split in transfer with no data
2018-04-24 8:27 UTC
usb: always build usb/common/ targets; fixes extcon-axp288 build error
2018-04-24 7:42 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-24 4:21 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-24 2:55 UTC
[5/5] usb: mtu3: make USB_MTU3_DUAL_ROLE depend on EXTCON but not USB_MTU3
2018-04-24 2:52 UTC
[4/5] usb: mtu3: fix operation failure when test TEST_J/K
2018-04-24 2:52 UTC
[3/5] usb: mtu3: fix an unrecognized issue when connected with PC
2018-04-24 2:52 UTC
[2/5] usb: mtu3: remove repeated setting of gadget state
2018-04-24 2:52 UTC
[1/5] usb: mtu3: avoid TX data length truncated in SS/SSP mode
2018-04-24 2:52 UTC
[2/2] usb: dwc2: fix isoc split in transfer with no data
2018-04-24 2:43 UTC
[1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-04-24 2:43 UTC
[v2,2/2] usb: dwc3: support clocks and resets for DWC3 core
2018-04-24 1:17 UTC
Request for information how to disable USB bulk endpoint transfer validation
2018-04-23 20:50 UTC
Request for information how to disable USB bulk endpoint transfer validation
2018-04-23 19:50 UTC
[v2,2/2] usb: dwc3: support clocks and resets for DWC3 core
2018-04-23 17:44 UTC
[3/3] usb: musb: Fix external abort in musb_remove on omap2430
2018-04-23 17:41 UTC
[2/3] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
2018-04-23 17:41 UTC
[1/3] usb: musb: fix enumeration after resume
2018-04-23 17:41 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-23 16:54 UTC
[1/2] usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
2018-04-23 16:43 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-04-23 15:11 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-04-23 14:52 UTC
[v2,1/1] drivers: usb: Introduce FSL_USB2_PHY_UTMI_DUAL for usb gadget
2018-04-23 14:32 UTC
[v8,6/6] typec: tcpm: Add support for sink PPS related messages
2018-04-23 14:11 UTC
[v8,5/6] typec: tcpm: Represent source supply through power_supply
2018-04-23 14:11 UTC
[v8,4/6] power: supply: Add 'usb_type' property and supporting code
2018-04-23 14:10 UTC
[v8,3/6] power: supply: Add error checking of psy desc during registration
2018-04-23 14:10 UTC
[v8,2/6] Documentation: power: Initial effort to document power_supply ABI
2018-04-23 14:10 UTC
[v8,1/6] typec: tcpm: Add core support for sink side PPS
2018-04-23 14:10 UTC
[2/2] USB: musb: host: prevent core phy initialisation
2018-04-23 13:50 UTC
[1/2] USB: musb: dsps: drop duplicate phy initialisation
2018-04-23 13:50 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-23 13:24 UTC
[v7,1/6] typec: tcpm: Add core support for sink side PPS
2018-04-23 13:20 UTC
[v7,1/6] typec: tcpm: Add core support for sink side PPS
2018-04-23 12:47 UTC
usb: core: hcd: mark expected switch fall-through
2018-04-23 12:14 UTC
[v7,1/6] typec: tcpm: Add core support for sink side PPS
2018-04-23 11:28 UTC
[v7,1/6] typec: tcpm: Add core support for sink side PPS
2018-04-23 11:06 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-23 9:02 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-23 8:58 UTC
usb: dwc2: gadget: Fix memory leak in dwc2_gadget_init()
2018-04-23 8:51 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-23 8:42 UTC
[v7,1/6] typec: tcpm: Add core support for sink side PPS
2018-04-23 8:25 UTC
[1/2] usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
2018-04-23 8:03 UTC
[v7,1/6] typec: tcpm: Add core support for sink side PPS
2018-04-23 7:49 UTC
[usb,v6,6/6] usb: core: phy: add the SPDX-License-Identifier and include guard
2018-04-23 7:39 UTC
[resend] usb: chipidea: Don't select EXTCON
2018-04-23 7:33 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-23 7:14 UTC
usb: dwc2: gadget: Fix memory leak in dwc2_gadget_init()
2018-04-23 7:05 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-23 7:03 UTC
usb:serial:optrion: fix dwm-158 3g modem interface
2018-04-23 7:00 UTC
[v7,1/6] typec: tcpm: Add core support for sink side PPS
2018-04-22 20:57 UTC
[usb,v6,6/6] usb: core: phy: add the SPDX-License-Identifier and include guard
2018-04-22 19:41 UTC
[v7,1/6] typec: tcpm: Add core support for sink side PPS
2018-04-22 14:05 UTC
[2/3] usbip: usbip_host: delete device from busid_table after rebind
2018-04-22 13:57 UTC
usb: always build usb/common/ targets; fixes extcon-axp288 build error
2018-04-22 13:20 UTC
[usb,v6,6/6] usb: core: phy: add the SPDX-License-Identifier and include guard
2018-04-22 13:01 UTC
[1/2] usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
2018-04-22 12:54 UTC
Revert "xhci: plat: Register shutdown for xhci_plat"
2018-04-22 12:31 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-04-22 6:29 UTC
[RESEND,v8,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-04-22 1:09 UTC
[2/4] usb: gadget: composite: add function to increment delayed_status
2018-04-21 15:38 UTC
usb: musb: Support gadget mode when the port is set to dual role
2018-04-21 14:34 UTC
[V5] USB: Increment wakeup count on remote wakeup
2018-04-21 13:37 UTC
[2/4] usb: gadget: composite: add function to increment delayed_status
2018-04-21 11:00 UTC
usb: musb: Support gadget mode when the port is set to dual role
2018-04-21 10:59 UTC
usb: musb: Support gadget mode when the port is set to dual role
2018-04-21 10:51 UTC
[V5] USB: Increment wakeup count on remote wakeup
2018-04-21 8:59 UTC
[2/3] usb: gadget: configfs: Create control_config group
2018-04-21 1:21 UTC
[v3] usb: mon: Change return type to vm_fault_t
2018-04-20 19:54 UTC
usb: musb: trace: fix NULL pointer dereference in musb_g_tx()
2018-04-20 19:30 UTC
[V5] USB: Increment wakeup count on remote wakeup
2018-04-20 18:22 UTC
[V3] USB: Increment wakeup count on remote wakeup
2018-04-20 18:12 UTC
[V5] USB: Increment wakeup count on remote wakeup
2018-04-20 18:08 UTC
[V4] USB: Increment wakeup count on remote wakeup
2018-04-20 17:54 UTC
[V3] USB: Increment wakeup count on remote wakeup
2018-04-20 17:29 UTC
[1/2] usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
2018-04-20 17:26 UTC
[V2] USB: Increment wakeup count on remote wakeup
2018-04-20 17:07 UTC
[V3] USB: Increment wakeup count on remote wakeup
2018-04-20 17:05 UTC
[v5,1/5] usb: typec: tcpm: pdo matching optimization
2018-04-20 16:14 UTC
[RFC] usb: typec: tcpm: remove operating_snk_mw for rdo
2018-04-20 15:22 UTC
usb: roles: intel_xhci: Don't use PMIC for port type identification
2018-04-20 15:18 UTC
[v5,5/5] usb: typec: tcpm: remove max_snk_mv/ma/mw
2018-04-20 15:17 UTC
[v5,4/5] usb: typec: wcove: remove max_snk_* for sink config
2018-04-20 15:16 UTC
[v5,3/5] dt-bindings: usb: fusb302: remove max-sink-* properties
2018-04-20 15:15 UTC
[v5,2/5] usb: typec: fusb302: remove max_snk_* for sink config
2018-04-20 15:14 UTC
[v5,1/5] usb: typec: tcpm: pdo matching optimization
2018-04-20 15:13 UTC
[2/4] usb: gadget: composite: add function to increment delayed_status
2018-04-20 14:51 UTC
usb: roles: intel_xhci: Don't use PMIC for port type identification
2018-04-20 14:35 UTC
usb: musb: Support gadget mode when the port is set to dual role
2018-04-20 14:25 UTC
[RFC] usb: typec: tcpm: remove operating_snk_mw for rdo
2018-04-20 14:13 UTC
[V2] USB: Increment wakeup count on remote wakeup
2018-04-20 14:12 UTC
[2/4] usb: gadget: composite: add function to increment delayed_status
2018-04-20 14:09 UTC
[3/3] usb: host: xhci-plat: Fix clock resource by adding a register clock
2018-04-20 13:52 UTC
[2/3] usb: host: xhci-plat: Remove useless test before clk_disable_unprepare
2018-04-20 13:52 UTC
[1/3] xhci: Fix USB ports for Dell Inspiron 5775
2018-04-20 13:52 UTC
[RFC] usb: typec: tcpm: remove operating_snk_mw for rdo
2018-04-20 12:49 UTC
[RFC] usb: typec: tcpm: remove operating_snk_mw for rdo
2018-04-20 10:51 UTC
[v2,4/6] USB: show USB 3.2 Dual-lane devices as Gen Xx2 during device enumeration
2018-04-20 10:24 UTC
[resend] usb: chipidea: Don't select EXTCON
2018-04-20 9:35 UTC
[v2] usb: chipidea: Hook into mux framework to toggle usb switch
2018-04-20 9:22 UTC
[RFC] usb: typec: tcpm: remove operating_snk_mw for rdo
2018-04-20 9:20 UTC
[RFC] usb: typec: tcpm: remove operating_snk_mw for rdo
2018-04-20 9:18 UTC
usb: roles: intel_xhci: Don't use PMIC for port type identification
2018-04-20 9:16 UTC
[resend] usb: chipidea: Don't select EXTCON
2018-04-20 9:01 UTC
usb: roles: intel_xhci: Don't use PMIC for port type identification
2018-04-20 8:06 UTC
[55/61] usb: mtu3: simplify getting .drvdata
2018-04-20 7:46 UTC
[v2] usb: chipidea: Hook into mux framework to toggle usb switch
2018-04-20 7:30 UTC
[v2] usb: chipidea: Hook into mux framework to toggle usb switch
2018-04-20 2:00 UTC
[resend] usb: chipidea: Don't select EXTCON
2018-04-20 1:38 UTC
USB: Increment wakeup count on remote wakeup
2018-04-20 0:50 UTC
[V2] USB: Increment wakeup count on remote wakeup
2018-04-20 0:27 UTC
[v2,1/1] usb: core: Add quirk for HP v222w 16GB Mini
2018-04-19 23:54 UTC
[2/4] usb: gadget: composite: add function to increment delayed_status
2018-04-19 19:42 UTC
[2/3] usb: gadget: configfs: Create control_config group
2018-04-19 19:17 UTC
[2/3] usb: gadget: configfs: Create control_config group
2018-04-19 19:02 UTC
[2/3] usb: gadget: configfs: Create control_config group
2018-04-19 18:32 UTC
NULL pointer dereference in xhci_suspend
2018-04-19 18:29 UTC
net: qmi_wwan: add Wistron Neweb D19Q1
2018-04-19 17:38 UTC
[v4,3/3] dt-bindings: Document the DT bindings for lan78xx
2018-04-19 16:59 UTC
[v4,2/3] lan78xx: Read LED states from Device Tree
2018-04-19 16:59 UTC
[v4,1/3] lan78xx: Read MAC address from DT if present
2018-04-19 16:59 UTC
USB: Increment wakeup count on remote wakeup
2018-04-19 16:17 UTC
[resend,v3,3/3] dt-bindings: Document the DT bindings for lan78xx
2018-04-19 16:07 UTC
[v2,6/6] Documentation sysfs-bus-usb: Add rx_lanes and tx_lanes introduced in USB 3.2
2018-04-19 16:05 UTC
[v2,5/6] USB: USB 3.2 Add sysfs entries for a usb device rx_lanes and tx_lanes
2018-04-19 16:05 UTC
[v2,4/6] USB: show USB 3.2 Dual-lane devices as Gen Xx2 during device enumeration
2018-04-19 16:05 UTC
[v2,3/6] usb: set root hub lane counts
2018-04-19 16:05 UTC
[v2,2/6] USB: Add support to store lane count used by USB 3.2
2018-04-19 16:05 UTC
[v2,1/6] usb: define HCD_USB32 speed option for hosts that support USB 3.2 dual-lane
2018-04-19 16:05 UTC
[v3,3/3] dt-bindings: Document the DT bindings for lan78xx
2018-04-19 15:20 UTC
[v3,2/3] lan78xx: Read LED states from Device Tree
2018-04-19 15:19 UTC
[resend,v3,3/3] dt-bindings: Document the DT bindings for lan78xx
2018-04-19 15:16 UTC
[resend,v3,2/3] lan78xx: Read LED states from Device Tree
2018-04-19 15:16 UTC
[resend,v3,1/3] lan78xx: Read MAC address from DT if present
2018-04-19 15:16 UTC
USB: Increment wakeup count on remote wakeup
2018-04-19 15:01 UTC
[v4,02/13] dt-bindings: usb: add documentation for typec port controller(TCPCI)
2018-04-19 14:47 UTC
[v3,3/3] dt-bindings: Document the DT bindings for lan78xx
2018-04-19 14:32 UTC
[v3,2/3] lan78xx: Read LED states from Device Tree
2018-04-19 14:32 UTC
[v3,1/3] lan78xx: Read MAC address from DT if present
2018-04-19 14:32 UTC
[56/61] usb: phy: simplify getting .drvdata
2018-04-19 14:06 UTC
[55/61] usb: mtu3: simplify getting .drvdata
2018-04-19 14:06 UTC
[v2,2/2] usb: host: xhci-plat: Fix clock resource by adding a register clock
2018-04-19 13:30 UTC
[v2,1/2] usb: host: xhci-plat: Remove useless test before clk_disable_unprepare
2018-04-19 13:30 UTC
NULL pointer dereference in xhci_suspend
2018-04-19 11:17 UTC
[v2,2/2] usb: dwc3: support clocks and resets for DWC3 core
2018-04-19 11:03 UTC
[v2,1/2] usb: dwc3: use local copy of resource to fix-up register offset
2018-04-19 11:03 UTC
USB: Increment wakeup count on remote wakeup
2018-04-19 9:33 UTC
USB: Increment wakeup count on remote wakeup
2018-04-19 9:30 UTC
[resend] usb: chipidea: Don't select EXTCON
2018-04-19 8:01 UTC
[RESEND,v8,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-04-19 4:40 UTC
[RESEND,v8,1/2] usb/gadget: Constify usb_gadget_get_string "table" argument
2018-04-19 4:39 UTC
USB: Increment wakeup count on remote wakeup
2018-04-19 0:18 UTC
[3/3] usb: musb: host: fix potential NULL pointer dereference
2018-04-18 20:05 UTC
[2/3] usb: musb: gadget: fix to_musb_ep() to not return NULL
2018-04-18 20:05 UTC
[1/3] usb: musb: gadget: fix to_musb_request() to not return NULL
2018-04-18 20:05 UTC
[usb,v6,6/6] usb: core: phy: add the SPDX-License-Identifier and include guard
2018-04-18 19:39 UTC
[usb,v6,5/6] usb: core: phy: add missing forward declaration for "struct device"
2018-04-18 19:39 UTC
[usb,v6,4/6] usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled
2018-04-18 19:39 UTC
[usb,v6,3/6] usb: core: use phy_exit during suspend if wake up is not supported
2018-04-18 19:39 UTC
[usb,v6,2/6] usb: core: split usb_phy_roothub_{init,alloc}
2018-04-18 19:39 UTC
[usb,v6,1/6] usb: core: phy: fix return value of usb_phy_roothub_exit()
2018-04-18 19:39 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-18 16:43 UTC
[v2,2/3] lan78xx: Read LED states from Device Tree
2018-04-18 16:11 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).