messages from 2018-05-02 14:48:03 to 2018-05-11 13:18:38 UTC [more...]
[RFC,v3,5/5] usb: typec: tcpm: Support for Alternate Modes
2018-05-11 13:18 UTC
[RFC,v3,4/5] usb: typec: pi3usb30532: Start using generic state values
2018-05-11 13:18 UTC
[RFC,v3,3/5] usb: typec: Bus type for alternate modes
2018-05-11 13:18 UTC
[RFC,v3,2/5] usb: typec: Register a device for every mode
2018-05-11 13:18 UTC
[RFC,v3,1/5] usb: typec: mux: Get the mux identifier from function parameter
2018-05-11 13:18 UTC
[v2,3/3] usb: gadget: udc: atmel: Fix indenting
2018-05-11 10:19 UTC
[v2,2/3] usb: gadget: udc: atmel: Remove obsolete include
2018-05-11 10:19 UTC
[v2,1/3] usb: gadget: udc: atmel: GPIO inversion is handled by gpiod
2018-05-11 10:19 UTC
[v5,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-11 9:46 UTC
[v5,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-11 9:46 UTC
[v4,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-11 9:33 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-11 9:26 UTC
[v4,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-10 21:01 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-10 20:59 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 15:17 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:47 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:41 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:31 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:29 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:25 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:09 UTC
USB: rndis: Fix for handling garbled messages
2018-05-10 13:09 UTC
[v2,2/2] usb: dwc3: support clocks and resets for DWC3 core
2018-05-10 9:24 UTC
[v3,2/2] phy: mediatek: add XS-PHY driver
2018-05-10 6:10 UTC
[v3,1/2] dt-bindings: add MediaTek XS-PHY binding
2018-05-10 6:10 UTC
[v2,7/7] usb: mtu3: fix uncontinuous SeqN issue after disable EP
2018-05-10 5:47 UTC
[v2,6/7] usb: mtu3: re-enable controller to accept LPM request after LPM resume
2018-05-10 5:47 UTC
[v2,5/7] usb: mtu3: make USB_MTU3_DUAL_ROLE depend on EXTCON but not USB_MTU3
2018-05-10 5:47 UTC
[v2,4/7] usb: mtu3: fix operation failure when test TEST_J/K
2018-05-10 5:47 UTC
[v2,3/7] usb: mtu3: fix an unrecognized issue when connected with PC
2018-05-10 5:47 UTC
[v2,2/7] usb: mtu3: remove repeated setting of gadget state
2018-05-10 5:47 UTC
[v2,1/7] usb: mtu3: avoid TX data length truncated in SS/SSP mode
2018-05-10 5:47 UTC
[RESEND,1/5] usb: mtu3: avoid TX data length truncated in SS/SSP mode
2018-05-10 3:11 UTC
[RESEND,1/5] usb: mtu3: avoid TX data length truncated in SS/SSP mode
2018-05-10 2:16 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 1:59 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 1:44 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 1:42 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 1:42 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-10 0:43 UTC
usb: gadget: composite: fill bcdUSB as 0x0320 for SuperSpeed or higher speeds
2018-05-10 0:03 UTC
[v2,11/11] docs: fix broken references with multiple hints
2018-05-09 19:22 UTC
[v4,3/3] usb: dwc3: core: Suspend PHYs on runtime suspend in host mode
2018-05-09 17:39 UTC
[v4,2/3] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-05-09 17:39 UTC
[v4,1/3] dt-bindings: usb: Update documentation for Qualcomm DWC3 driver
2018-05-09 17:39 UTC
[v2,11/11] docs: fix broken references with multiple hints
2018-05-09 13:18 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-09 12:49 UTC
usb: gadget: composite: fill bcdUSB as 0x0320 for SuperSpeed or higher speeds
2018-05-09 11:29 UTC
[v4,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-09 10:11 UTC
[v4,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-09 10:11 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-09 8:55 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-08 19:10 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 15:36 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-08 15:29 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 15:29 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 15:25 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-08 14:25 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 10:55 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 10:47 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-08 10:03 UTC
[v3,1/2] usb: misc: xapea00x: add driver for Xaptum ENF Access Card
2018-05-08 9:09 UTC
usb: storage: Fix a possible data race in uas_queuecommand_lck
2018-05-08 8:39 UTC
[4/5] arm64: allwinner: h6: add USB3 device nodes
2018-05-08 8:31 UTC
usb: storage: Fix a possible data race in uas_queuecommand_lck
2018-05-08 8:27 UTC
usb: storage: Fix a possible data race in uas_queuecommand_lck
2018-05-08 7:47 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-08 7:43 UTC
[v3,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-08 7:01 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-08 5:36 UTC
[v3,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-08 5:13 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-08 5:11 UTC
[v3,2/3] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-05-08 4:06 UTC
[v2,1/2] dt-bindings: usb: add bindings doc for HiSilicon STB xHCI host controller
2018-05-08 3:27 UTC
[v3,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-08 3:07 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-08 3:07 UTC
[PATCH/RFC,v2,1/6] dt-bindings: usb: add Renesas R-Car USB 3.0 role switch
2018-05-08 2:43 UTC
[v2,1/2] dt-bindings: add MediaTek XS-PHY binding
2018-05-08 1:03 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-07 21:19 UTC
[v5,6/7] dt-bindings: phy-qcom-usb2: Add support to override tuning values
2018-05-07 20:40 UTC
[v2,1/2] dt-bindings: usb: add bindings doc for HiSilicon STB xHCI host controller
2018-05-07 17:09 UTC
[v2,1/2] dt-bindings: add MediaTek XS-PHY binding
2018-05-07 17:04 UTC
[v3,1/3] dt-bindings: usb: Update documentation for Qualcomm DWC3 driver
2018-05-07 16:17 UTC
[v5,02/14] dt-bindings: usb: add documentation for typec port controller(TCPCI)
2018-05-07 16:01 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-07 15:58 UTC
[v5,6/7] dt-bindings: phy-qcom-usb2: Add support to override tuning values
2018-05-07 15:57 UTC
[v5,6/7] dt-bindings: phy-qcom-usb2: Add support to override tuning values
2018-05-07 15:53 UTC
[5/5] arm64: allwinner: h6: enable USB3 port on Pine H64
2018-05-07 15:18 UTC
[4/5] arm64: allwinner: h6: add USB3 device nodes
2018-05-07 15:18 UTC
[3/5] usb: dwc3: of-simple: Add compatible for Allwinner H6 platform
2018-05-07 15:18 UTC
[2/5] dt-bindings: usb: add binding for the DWC3 controller on Allwinner SoC
2018-05-07 15:18 UTC
[1/5] phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC
2018-05-07 15:18 UTC
EXTERNAL: [PATCH v3 2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-07 14:12 UTC
[v5,4/7] dt-bindings: phy-qcom-qmp: Update bindings for sdm845
2018-05-07 14:08 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-07 13:39 UTC
[v3,1/2] usb: misc: xapea00x: add driver for Xaptum ENF Access Card
2018-05-07 13:31 UTC
[v2,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-07 13:28 UTC
[4/4] usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic
2018-05-07 12:43 UTC
[3/4] usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
2018-05-07 12:43 UTC
[2/4] usb: dwc2: Modify dwc2_readl/writel functions prototype
2018-05-07 12:43 UTC
[1/4] usb: dwc2: Move dwc2_readl/writel functions after hsotg structure
2018-05-07 12:43 UTC
usb: dwc3: gadget: init req->{direction,epnum} from alloc_request()
2018-05-07 12:35 UTC
[v3,1/2] usb: misc: xapea00x: add driver for Xaptum ENF Access Card
2018-05-07 9:58 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-05-07 9:32 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-05-07 5:00 UTC
usb: gadget: f_ecm: fix host mac address for multiple instances
2018-05-06 23:36 UTC
USB: Gadget Ethernet: Re-enable Jumbo frames
2018-05-06 20:01 UTC
phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend
2018-05-06 16:48 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-06 15:02 UTC
usb: dwc2: Change reading of current frame number flow
2018-05-05 13:46 UTC
[v2,2/2] xhci: hisilicon: support HiSilicon STB xHCI host controller
2018-05-05 10:09 UTC
[v2,1/2] dt-bindings: usb: add bindings doc for HiSilicon STB xHCI host controller
2018-05-05 10:09 UTC
usb: dwc2: debugfs: Don't touch RX FIFO during register dump
2018-05-05 9:32 UTC
usb: dwc2: Fix crash in incomplete isoc intr handlers
2018-05-05 8:30 UTC
usb: dwc2: Add Interpacket Gap(IPG) feature support
2018-05-05 8:17 UTC
[RESEND,5/5] usb: mtu3: make USB_MTU3_DUAL_ROLE depend on EXTCON but not USB_MTU3
2018-05-05 2:21 UTC
[RESEND,4/5] usb: mtu3: fix operation failure when test TEST_J/K
2018-05-05 2:21 UTC
[RESEND,3/5] usb: mtu3: fix an unrecognized issue when connected with PC
2018-05-05 2:21 UTC
[RESEND,2/5] usb: mtu3: remove repeated setting of gadget state
2018-05-05 2:21 UTC
[RESEND,1/5] usb: mtu3: avoid TX data length truncated in SS/SSP mode
2018-05-05 2:21 UTC
[v2,2/2] phy: mediatek: add XS-PHY driver
2018-05-05 2:15 UTC
[v2,1/2] dt-bindings: add MediaTek XS-PHY binding
2018-05-05 2:15 UTC
[v2] phy: phy-mtk-tphy: use SPDX license tag
2018-05-05 1:47 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-04 20:19 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-04 19:56 UTC
[v5,7/7] phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845
2018-05-04 19:47 UTC
[v5,6/7] dt-bindings: phy-qcom-usb2: Add support to override tuning values
2018-05-04 19:47 UTC
[v5,2/7] phy: qcom-qmp: Enable pipe_clk before PHY initialization
2018-05-04 19:47 UTC
[v5,1/7] clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk
2018-05-04 19:46 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-04 19:06 UTC
[v3,3/3] usb: dwc3: core: Suspend PHYs on runtime suspend in host mode
2018-05-04 18:48 UTC
[v3,2/3] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-05-04 18:48 UTC
[v3,1/3] dt-bindings: usb: Update documentation for Qualcomm DWC3 driver
2018-05-04 18:48 UTC
usb: dwc2: debugfs: Don't touch RX FIFO during register dump
2018-05-04 18:09 UTC
ehci-usb regression on 32-bit laptops in v4.17-rc1
2018-05-04 17:27 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-04 16:57 UTC
[v2,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-04 15:58 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-04 14:56 UTC
ehci-usb regression on 32-bit laptops in v4.17-rc1
2018-05-04 14:39 UTC
[TESTPATCH] xhci: Fix perceived dead host due to runtime suspend race with event handler
2018-05-04 14:27 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-04 13:00 UTC
[v3,1/2] usb: misc: xapea00x: add driver for Xaptum ENF Access Card
2018-05-04 13:00 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-05-04 11:53 UTC
[2/2] xhci: hisilicon: support HiSilicon STB xHCI host controller
2018-05-04 10:32 UTC
[2/2] xhci: hisilicon: support HiSilicon STB xHCI host controller
2018-05-04 9:59 UTC
[2/2] xhci: hisilicon: support HiSilicon STB xHCI host controller
2018-05-04 9:20 UTC
[1/2] dt-bindings: usb: add bindings doc for HiSilicon STB xHCI host controller
2018-05-04 9:20 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-04 8:59 UTC
[1/1] xhci: Fix use-after-free in xhci_free_virt_device
2018-05-04 6:19 UTC
ehci-usb regression on 32-bit laptops in v4.17-rc1
2018-05-04 1:38 UTC
[v10,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
2018-05-03 20:59 UTC
[v10,1/2] usb/gadget: Constify usb_gadget_get_string "table" argument
2018-05-03 20:59 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-05-03 18:56 UTC
[net,stable] qmi_wwan: do not steal interfaces from class drivers
2018-05-03 15:25 UTC
USB: Accept bulk endpoints with 1024-byte maxpacket
2018-05-03 15:04 UTC
[v2] musb: fix remote wakeup racing with suspend
2018-05-03 14:43 UTC
musb: fix remote wakeup racing with suspend
2018-05-03 14:42 UTC
usb: dwc2: Enable BNA interrupt for IN endpoints
2018-05-03 13:25 UTC
usb: dwc2: Change ISOC DDMA flow
2018-05-03 13:24 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-05-03 12:12 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-05-03 11:53 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-05-03 11:37 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-05-03 10:41 UTC
[v5,1/7] clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk
2018-05-03 10:41 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-05-03 9:41 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-03 9:17 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-05-03 8:42 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-03 8:35 UTC
[v5,08/14] staging: typec: tcpci: register port before request irq
2018-05-03 8:34 UTC
[v5,08/14] staging: typec: tcpci: register port before request irq
2018-05-03 8:29 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-05-03 8:14 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-03 7:27 UTC
patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
2018-05-03 4:49 UTC
[1/2] dt-bindings: add MediaTek XS-PHY binding
2018-05-03 1:20 UTC
[v5,14/14] staging: typec: tcpci: move tcpci driver out of staging
2018-05-03 0:24 UTC
[v5,13/14] staging: typec: tcpci: Only touch target bit when enable vconn
2018-05-03 0:24 UTC
[v5,12/14] staging: typec: tcpci: keep the not connecting cc line open
2018-05-03 0:24 UTC
[v5,11/14] usb: typec: tcpm: set cc for drp toggling attach
2018-05-03 0:24 UTC
[v5,10/14] typec: tcpm: add starting value for drp toggling
2018-05-03 0:24 UTC
[v5,09/14] staging: typec: tcpci: enable vbus detection
2018-05-03 0:24 UTC
[v5,08/14] staging: typec: tcpci: register port before request irq
2018-05-03 0:24 UTC
[v5,07/14] staging: typec: tcpci: remove unused tcpci_tcpc_config
2018-05-03 0:24 UTC
[v5,06/14] usb: typec: tcpm: support get typec and pd config from device properties
2018-05-03 0:24 UTC
[v5,05/14] usb: typec: add API to get typec basic port power and data config
2018-05-03 0:24 UTC
[v5,04/14] usb: typec: add fwnode to tcpc
2018-05-03 0:24 UTC
[v5,03/14] staging: typec: tcpci: add compatible string for nxp ptn5110
2018-05-03 0:24 UTC
[v5,02/14] dt-bindings: usb: add documentation for typec port controller(TCPCI)
2018-05-03 0:24 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-03 0:24 UTC
[v5,7/7] phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845
2018-05-02 21:06 UTC
[v5,6/7] dt-bindings: phy-qcom-usb2: Add support to override tuning values
2018-05-02 21:06 UTC
[v5,5/7] phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support for sdm845
2018-05-02 21:06 UTC
[v5,4/7] dt-bindings: phy-qcom-qmp: Update bindings for sdm845
2018-05-02 21:06 UTC
[v5,3/7] phy: qcom-qusb2: Fix crash if nvmem cell not specified
2018-05-02 21:06 UTC
[v5,2/7] phy: qcom-qmp: Enable pipe_clk before PHY initialization
2018-05-02 21:06 UTC
[v5,1/7] clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk
2018-05-02 21:06 UTC
[net,stable] qmi_wwan: do not steal interfaces from class drivers
2018-05-02 20:22 UTC
Since Linux 4.13 tlp or powertop usage cause "xHCI host controller not responding, assume dead" on Dell 5855
2018-05-02 17:52 UTC
[v2,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-02 17:16 UTC
[v2,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-02 17:14 UTC
[RFC,07/10] pinctrl: samsung: Remove support for Exynos5440
2018-05-02 17:09 UTC
[RFC,01/10] ARM: dts: exynos: Remove Exynos5440
2018-05-02 17:07 UTC
[RFC,10/10] ARM: exynos: Remove support for Exynos5440
2018-05-02 17:07 UTC
usb-storage: stop using block layer bounce buffers
2018-05-02 14:48 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).