messages from 2018-05-08 04:06:48 to 2018-05-17 06:51:17 UTC [more...]
usbip: vhci_sysfs: fix potential Spectre v1
2018-05-17 6:51 UTC
[v3] usb: dwc2: Fix kernel doc's warnings
2018-05-17 5:34 UTC
usbserial: pl2303 tx xon/xoff flow control
2018-05-17 3:39 UTC
usbip: vhci_sysfs: fix potential Spectre v1
2018-05-16 22:22 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-16 21:11 UTC
[v5,05/14] usb: typec: add API to get typec basic port power and data config
2018-05-16 20:55 UTC
usb-storage: Add quirks to make G-Technology "G-Drive" work
2018-05-16 20:55 UTC
[net-next,v2,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-16 20:20 UTC
usb-storage: Add quirks to make G-Technology "G-Drive" work
2018-05-16 20:01 UTC
[net-next,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-16 17:05 UTC
[net-next,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-16 16:33 UTC
typec: tcpm: Provide of_node pointer as part of psy_cfg
2018-05-16 16:00 UTC
usbip: usbip_host: fix bad unlock balance during stub_probe()
2018-05-16 14:03 UTC
[V3,3/3] usb: xhci: tegra: Add support for managing powergates
2018-05-16 13:48 UTC
[V3,2/3] usb: xhci: tegra: Add runtime PM support
2018-05-16 13:48 UTC
[V3,1/3] usb: xhci: tegra: Prepare for adding runtime PM support
2018-05-16 13:48 UTC
usbserial: pl2303 tx xon/xoff flow control
2018-05-16 13:28 UTC
[RFC] iscsit_wait_for_tag() can be static
2018-05-16 12:47 UTC
[1/2] Convert target drivers to use sbitmap
2018-05-16 12:47 UTC
[v5,05/14] usb: typec: add API to get typec basic port power and data config
2018-05-16 12:25 UTC
Not enough bandwidth with Magewell XI100DUSB-HDMI
2018-05-16 11:55 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-16 11:43 UTC
[net-next,v2,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-16 11:01 UTC
USB: serial: use tty_port_register_device()
2018-05-16 9:47 UTC
USB: serial: use tty_port_register_device()
2018-05-16 9:42 UTC
[v5,12/14] staging: typec: tcpci: keep the not connecting cc line open
2018-05-16 8:35 UTC
[v3] usb: dwc2: Fix kernel doc's warnings
2018-05-16 8:07 UTC
[v3] usb: dwc2: Fix kernel doc's warnings
2018-05-16 8:04 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-16 7:21 UTC
[net-next,v2,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-16 6:49 UTC
[V2,2/4] usb: gadget: configfs: Create control_config group
2018-05-16 6:34 UTC
[V2,2/4] usb: gadget: configfs: Create control_config group
2018-05-16 6:13 UTC
usb: xhci: force all memory allocations to node
2018-05-16 6:02 UTC
[v2] usb: dwc2: Fix kernel doc's warnings
2018-05-16 5:59 UTC
[v2,2/2] arm64: dts: exynos: add OF graph between USB-PHY and MUIC
2018-05-16 5:56 UTC
[1/2] Convert target drivers to use sbitmap
2018-05-16 5:54 UTC
usbip: usbip_host: fix bad unlock balance during stub_probe()
2018-05-16 5:49 UTC
[v3,2/2] usb: dwc3: support clocks and resets for DWC3 core
2018-05-16 2:41 UTC
[v3,1/2] usb: dwc3: use local copy of resource to fix-up register offset
2018-05-16 2:41 UTC
[net-next,v2,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-16 1:57 UTC
[net-next,v2,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-16 0:01 UTC
usbip: usbip_host: fix bad unlock balance during stub_probe()
2018-05-15 23:57 UTC
[net-next,v2,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-15 23:56 UTC
[net-next,v2,1/2] of: mdio: Fall back to mdiobus_register() with NULL device_node
2018-05-15 23:56 UTC
[net-next,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-15 22:59 UTC
[net-next,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-15 22:57 UTC
[net-next,2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
2018-05-15 21:59 UTC
[net-next,1/2] of: mdio: Fall back to mdiobus_register() with np is NULL
2018-05-15 21:59 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-15 21:24 UTC
[v2,1/1] drivers: usb: Introduce FSL_USB2_PHY_UTMI_DUAL for usb gadget
2018-05-15 21:04 UTC
[v5,05/14] usb: typec: add API to get typec basic port power and data config
2018-05-15 20:52 UTC
usb: xhci: force all memory allocations to node
2018-05-15 20:51 UTC
[1/2] Convert target drivers to use sbitmap
2018-05-15 16:20 UTC
[1/2] Convert target drivers to use sbitmap
2018-05-15 16:11 UTC
[2/2] Remove percpu_ida
2018-05-15 16:00 UTC
[1/2] Convert target drivers to use sbitmap
2018-05-15 16:00 UTC
usb: xhci: force all memory allocations to node
2018-05-15 15:07 UTC
[v2,11/11] docs: fix broken references with multiple hints
2018-05-15 14:52 UTC
usb: xhci: force all memory allocations to node
2018-05-15 13:53 UTC
[v2,2/2] arm64: dts: exynos: add OF graph between USB-PHY and MUIC
2018-05-15 12:19 UTC
[v2,2/2] arm64: dts: exynos: add OF graph between USB-PHY and MUIC
2018-05-15 12:12 UTC
[v2,1/2] USB: dwc3: get extcon device by OF graph bindings
2018-05-15 12:12 UTC
[PATCH/RFC,v3,1/4] base: devcon: add a new API to find the graph
2018-05-15 11:02 UTC
[v2,11/11] docs: fix broken references with multiple hints
2018-05-15 10:28 UTC
[v2] usb: dwc2: Fix kernel doc's warnings
2018-05-15 10:15 UTC
usb: dwc2: gadget: Fix memory leak in dwc2_gadget_init()
2018-05-15 10:12 UTC
Not enough bandwidth with Magewell XI100DUSB-HDMI
2018-05-15 9:22 UTC
usb: dwc2: Change reading of current frame number flow
2018-05-15 8:59 UTC
usb: dwc2: Fix crash in incomplete isoc intr handlers
2018-05-15 8:59 UTC
usb: dwc2: Add Interpacket Gap(IPG) feature support
2018-05-15 8:59 UTC
[PATCH/RFC,v3,3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
2018-05-15 8:32 UTC
[PATCH/RFC,v3,1/4] base: devcon: add a new API to find the graph
2018-05-15 8:29 UTC
[PATCH/RFC,v3,3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
2018-05-15 8:03 UTC
[PATCH/RFC,v3,3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
2018-05-15 8:02 UTC
[v2,6/6] usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
2018-05-15 7:55 UTC
[PATCH/RFC,v3,3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
2018-05-15 7:54 UTC
[v2,6/6] usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
2018-05-15 7:49 UTC
[1/4] usb: dwc2: Move dwc2_readl/writel functions after hsotg structure
2018-05-15 7:41 UTC
[v2,6/6] usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
2018-05-15 7:35 UTC
Fwd: Enabling USB (auto)suspend for xHCI controllers incurs random device failures since kernel 4.15
2018-05-15 7:33 UTC
[1/2] USB: dwc3: get extcon device by OF graph bindings
2018-05-15 7:31 UTC
[v2,5/6] usb: gadget: udc: renesas_usb3: should fail if devm_phy_get() returns error
2018-05-15 7:31 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-15 7:30 UTC
[1/2] USB: dwc3: get extcon device by OF graph bindings
2018-05-15 7:26 UTC
usb: gadget: composite: fill bcdUSB as 0x0320 for SuperSpeed or higher speeds
2018-05-15 7:22 UTC
[1/4] usb: dwc2: Move dwc2_readl/writel functions after hsotg structure
2018-05-15 7:17 UTC
[v2,1/1] drivers: usb: Introduce FSL_USB2_PHY_UTMI_DUAL for usb gadget
2018-05-15 7:14 UTC
usbip: usbip_host: fix NULL-ptr deref and use-after-free errors
2018-05-15 2:49 UTC
[PATCH/RFC,v3,1/4] base: devcon: add a new API to find the graph
2018-05-15 2:19 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-14 20:12 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-14 20:08 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-14 19:59 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-14 19:31 UTC
Fwd: Enabling USB (auto)suspend for xHCI controllers incurs random device failures since kernel 4.15
2018-05-14 18:06 UTC
Fwd: Enabling USB (auto)suspend for xHCI controllers incurs random device failures since kernel 4.15
2018-05-14 18:06 UTC
[PATCH/RFC,v3,1/4] base: devcon: add a new API to find the graph
2018-05-14 15:09 UTC
usb: musb: fix remote wakeup racing with suspend
2018-05-14 14:40 UTC
Fwd: Enabling USB (auto)suspend for xHCI controllers incurs random device failures since kernel 4.15
2018-05-14 13:27 UTC
[PATCH/RFC,v3,1/4] base: devcon: add a new API to find the graph
2018-05-14 13:27 UTC
[RFC,v3,3/5] usb: typec: Bus type for alternate modes
2018-05-14 10:42 UTC
[RFC,v3,5/5] usb: typec: tcpm: Support for Alternate Modes
2018-05-14 10:40 UTC
[v5,14/14] staging: typec: tcpci: move tcpci driver out of staging
2018-05-14 9:38 UTC
[v5,05/14] usb: typec: add API to get typec basic port power and data config
2018-05-14 9:36 UTC
[PATCH/RFC,v3,4/4] arm64: dts: renesas: r8a7795: add OF graph for usb role switch
2018-05-14 9:16 UTC
[PATCH/RFC,v3,3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
2018-05-14 9:15 UTC
[PATCH/RFC,v3,2/4] usb: gadget: udc: renesas_usb3: Add register of usb role switch
2018-05-14 9:15 UTC
[PATCH/RFC,v3,1/4] base: devcon: add a new API to find the graph
2018-05-14 9:15 UTC
[v5,03/14] staging: typec: tcpci: add compatible string for nxp ptn5110
2018-05-14 9:15 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-14 9:06 UTC
usbcore: NULL pointer dereference after detaching USB disk with linux 4.17
2018-05-14 9:00 UTC
[1/1] xhci: Fix USB3 NULL pointer dereference at logical disconnect
2018-05-14 8:57 UTC
[1/2] USB: dwc3: get extcon device by OF graph bindings
2018-05-14 8:38 UTC
[v2] usb: chipidea: Hook into mux framework to toggle usb switch
2018-05-14 7:21 UTC
[v3,2/2] xhci: hisilicon: support HiSilicon STB xHCI host controller
2018-05-14 6:20 UTC
[v3,1/2] dt-bindings: usb: add bindings doc for HiSilicon STB xHCI host controller
2018-05-14 6:20 UTC
usbserial: pl2303 tx xon/xoff flow control
2018-05-14 3:15 UTC
[PATCH/RFC,v2,1/6] dt-bindings: usb: add Renesas R-Car USB 3.0 role switch
2018-05-14 2:31 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-13 8:51 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-13 8:46 UTC
[RFC,v3,3/5] usb: typec: Bus type for alternate modes
2018-05-13 1:25 UTC
[RFC,v3,5/5] usb: typec: tcpm: Support for Alternate Modes
2018-05-12 21:30 UTC
[v5,14/14] staging: typec: tcpci: move tcpci driver out of staging
2018-05-11 21:37 UTC
usbcore: NULL pointer dereference after detaching USB disk with linux 4.17
2018-05-11 20:06 UTC
[v5,05/14] usb: typec: add API to get typec basic port power and data config
2018-05-11 19:55 UTC
[v5,03/14] staging: typec: tcpci: add compatible string for nxp ptn5110
2018-05-11 19:51 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-11 19:49 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-11 19:28 UTC
usbcore: NULL pointer dereference after detaching USB disk with linux 4.17
2018-05-11 16:16 UTC
[PATCH/RFC,v2,1/6] dt-bindings: usb: add Renesas R-Car USB 3.0 role switch
2018-05-11 16:07 UTC
[v2] musb: fix remote wakeup racing with suspend
2018-05-11 15:46 UTC
[RFC,v3,5/5] usb: typec: tcpm: Support for Alternate Modes
2018-05-11 13:18 UTC
[RFC,v3,4/5] usb: typec: pi3usb30532: Start using generic state values
2018-05-11 13:18 UTC
[RFC,v3,3/5] usb: typec: Bus type for alternate modes
2018-05-11 13:18 UTC
[RFC,v3,2/5] usb: typec: Register a device for every mode
2018-05-11 13:18 UTC
[RFC,v3,1/5] usb: typec: mux: Get the mux identifier from function parameter
2018-05-11 13:18 UTC
[v2,3/3] usb: gadget: udc: atmel: Fix indenting
2018-05-11 10:19 UTC
[v2,2/3] usb: gadget: udc: atmel: Remove obsolete include
2018-05-11 10:19 UTC
[v2,1/3] usb: gadget: udc: atmel: GPIO inversion is handled by gpiod
2018-05-11 10:19 UTC
[v5,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-11 9:46 UTC
[v5,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-11 9:46 UTC
[v4,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-11 9:33 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-11 9:26 UTC
[v4,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-10 21:01 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-10 20:59 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 15:17 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:47 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:41 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:31 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:29 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:25 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 14:09 UTC
USB: rndis: Fix for handling garbled messages
2018-05-10 13:09 UTC
[v2,2/2] usb: dwc3: support clocks and resets for DWC3 core
2018-05-10 9:24 UTC
[v3,2/2] phy: mediatek: add XS-PHY driver
2018-05-10 6:10 UTC
[v3,1/2] dt-bindings: add MediaTek XS-PHY binding
2018-05-10 6:10 UTC
[v2,7/7] usb: mtu3: fix uncontinuous SeqN issue after disable EP
2018-05-10 5:47 UTC
[v2,6/7] usb: mtu3: re-enable controller to accept LPM request after LPM resume
2018-05-10 5:47 UTC
[v2,5/7] usb: mtu3: make USB_MTU3_DUAL_ROLE depend on EXTCON but not USB_MTU3
2018-05-10 5:47 UTC
[v2,4/7] usb: mtu3: fix operation failure when test TEST_J/K
2018-05-10 5:47 UTC
[v2,3/7] usb: mtu3: fix an unrecognized issue when connected with PC
2018-05-10 5:47 UTC
[v2,2/7] usb: mtu3: remove repeated setting of gadget state
2018-05-10 5:47 UTC
[v2,1/7] usb: mtu3: avoid TX data length truncated in SS/SSP mode
2018-05-10 5:47 UTC
[RESEND,1/5] usb: mtu3: avoid TX data length truncated in SS/SSP mode
2018-05-10 3:11 UTC
[RESEND,1/5] usb: mtu3: avoid TX data length truncated in SS/SSP mode
2018-05-10 2:16 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 1:59 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 1:44 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 1:42 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-10 1:42 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-10 0:43 UTC
usb: gadget: composite: fill bcdUSB as 0x0320 for SuperSpeed or higher speeds
2018-05-10 0:03 UTC
[v2,11/11] docs: fix broken references with multiple hints
2018-05-09 19:22 UTC
[v4,3/3] usb: dwc3: core: Suspend PHYs on runtime suspend in host mode
2018-05-09 17:39 UTC
[v4,2/3] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-05-09 17:39 UTC
[v4,1/3] dt-bindings: usb: Update documentation for Qualcomm DWC3 driver
2018-05-09 17:39 UTC
[v2,11/11] docs: fix broken references with multiple hints
2018-05-09 13:18 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-09 12:49 UTC
usb: gadget: composite: fill bcdUSB as 0x0320 for SuperSpeed or higher speeds
2018-05-09 11:29 UTC
[v4,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-09 10:11 UTC
[v4,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-09 10:11 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-09 8:55 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-08 19:10 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 15:36 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-08 15:29 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 15:29 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 15:25 UTC
[RFC,1/7] usb: typec: Generalize mux mode names
2018-05-08 14:25 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 10:55 UTC
[v3,2/2] usb: misc: xapea00x: perform platform initialization of TPM
2018-05-08 10:47 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-08 10:03 UTC
[v3,1/2] usb: misc: xapea00x: add driver for Xaptum ENF Access Card
2018-05-08 9:09 UTC
usb: storage: Fix a possible data race in uas_queuecommand_lck
2018-05-08 8:39 UTC
[4/5] arm64: allwinner: h6: add USB3 device nodes
2018-05-08 8:31 UTC
usb: storage: Fix a possible data race in uas_queuecommand_lck
2018-05-08 8:27 UTC
usb: storage: Fix a possible data race in uas_queuecommand_lck
2018-05-08 7:47 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-08 7:43 UTC
[v3,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-08 7:01 UTC
[v5,01/14] dt-bindings: connector: add properties for typec
2018-05-08 5:36 UTC
[v3,2/2] usb: dwc2: fix isoc split in transfer with no data
2018-05-08 5:13 UTC
[v3,1/2] usb: dwc2: alloc dma aligned buffer for isoc split in
2018-05-08 5:11 UTC
[v3,2/3] usb: dwc3: Add Qualcomm DWC3 glue driver
2018-05-08 4:06 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).