messages from 2018-08-24 06:30:41 to 2018-09-03 16:49:02 UTC [more...]
[3.18,12/56] usb/phy: fix PPC64 build errors in phy-fsl-usb.c
2018-09-03 16:49 UTC
[4.4,14/80] usb/phy: fix PPC64 build errors in phy-fsl-usb.c
2018-09-03 16:48 UTC
[v2,06/10] platform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
2018-09-03 14:59 UTC
usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier match
2018-09-03 14:10 UTC
[v2,10/10] usb: typec: fusb302: reorganizing the probe function a little
2018-09-03 13:36 UTC
[v2,09/10] platform: x86: intel_cht_int33fe: Remove the old connections for the muxes
2018-09-03 13:36 UTC
[v2,08/10] usb: typec: class: Don't use port parent for getting mux handles
2018-09-03 13:36 UTC
[v2,07/10] platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
2018-09-03 13:36 UTC
[v2,06/10] platform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
2018-09-03 13:36 UTC
[v2,05/10] platform: x86: intel_cht_int33fe: Register all connections at once
2018-09-03 13:36 UTC
[v2,04/10] drivers: base: Helpers for adding device connection descriptions
2018-09-03 13:36 UTC
[v2,03/10] platform: x86: intel_cht_int33fe: Add dependency on muxes
2018-09-03 13:36 UTC
[v2,02/10] usb: roles: Handle driver reference counting
2018-09-03 13:36 UTC
[v2,01/10] usb: typec: Take care of driver module reference counting
2018-09-03 13:36 UTC
usb: xhci: tegra: Firmware header is little endian
2018-09-03 12:50 UTC
[v2] usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
2018-09-03 12:44 UTC
usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
2018-09-03 12:36 UTC
usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier match
2018-09-03 12:36 UTC
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
2018-09-03 11:01 UTC
usb: xhci: tegra: Firmware header is little endian
2018-09-03 10:18 UTC
usb: dwc2: Fix call location of dwc2_check_core_endianness
2018-09-03 8:09 UTC
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
2018-09-03 8:01 UTC
usb: typec: fix kernel-doc parameter warning
2018-09-03 7:20 UTC
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
2018-09-03 7:15 UTC
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
2018-09-03 6:01 UTC
usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier match
2018-09-03 4:14 UTC
usb/dwc3/gadget: fix kernel-doc parameter warning
2018-09-03 2:39 UTC
usb: typec: fix kernel-doc parameter warning
2018-09-03 2:30 UTC
[v1] arm64: dts: dwc3: Add description of 'configure-gfladj'
2018-09-03 1:19 UTC
usb: chipidea: imx: do not use preprocessor conditionals for PM
2018-09-02 17:37 UTC
usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier match
2018-09-02 17:36 UTC
usb: dwc2: Fix call location of dwc2_check_core_endianness
2018-09-01 22:43 UTC
[2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-01 18:31 UTC
[v2] usb: host: fotg2: add silicon clock handling
2018-09-01 16:03 UTC
[RFC] usb: dwc2: power off during shutdown
2018-09-01 9:54 UTC
usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()
2018-09-01 9:23 UTC
usb: misc: uss720: Fix two sleep-in-atomic-context bugs
2018-09-01 8:25 UTC
[v2] usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
2018-09-01 8:12 UTC
usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
2018-09-01 8:03 UTC
[v4,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-31 20:41 UTC
[v5,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-31 20:22 UTC
[v5,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-31 20:22 UTC
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-31 20:01 UTC
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-31 19:24 UTC
usb: core: added uevent for over-current
2018-08-31 17:14 UTC
usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
2018-08-31 14:39 UTC
[2/2] xhci: Fix use after free for URB cancellation on a reallocated endpoint
2018-08-31 14:24 UTC
[1/2] usb: host: xhci-plat: Iterate over parent nodes for finding quirks
2018-08-31 14:24 UTC
[8/8] plarform: x86: intel_cht_int33fe: Remove the old connections for the muxes
2018-08-31 14:20 UTC
[7/8] usb: typec: class: Don't use port parent for getting mux handles
2018-08-31 14:20 UTC
[6/8] plarform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
2018-08-31 14:20 UTC
[5/8] plarform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
2018-08-31 14:20 UTC
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
2018-08-31 14:20 UTC
[3/8] plarform: x86: intel_cht_int33fe: Use the USB role switch conditionally
2018-08-31 14:20 UTC
[2/8] plarform: x86: intel_cht_int33fe: Register all connections at once
2018-08-31 14:20 UTC
[1/8] drivers: base: Helpers for adding device connection descriptions
2018-08-31 14:20 UTC
usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
2018-08-31 14:06 UTC
[6/6] usb: gadget: udc: renesas_usb3: Add r8a774a1 support
2018-08-31 12:20 UTC
[5/6] dt-bindings: usb: renesas_usbhs: Add r8a774a1 support
2018-08-31 12:20 UTC
[3/6] dt-bindings: usb-xhci: Add r8a774a1 support
2018-08-31 12:20 UTC
[2/3] dt-bindings: usb: fusb302: Use usb-connector bindings for configuration
2018-08-31 12:17 UTC
[1/3] dt-bindings: connector: Add support for USB-PD PPS APDOs to bindings
2018-08-31 12:16 UTC
[v2,3/3] usb: renesas_usbhs: Add multiple clocks management
2018-08-31 10:32 UTC
[v2,2/3] dt-bindings: usb: renesas_usbhs: add clock-names property
2018-08-31 10:32 UTC
[v2,1/3] usb: renesas_usbhs: Add reset_control
2018-08-31 10:32 UTC
[V2,3/4] serial: f81232: implement break control
2018-08-31 10:13 UTC
usb: core: phy: clean up return value check about devm_of_phy_get_by_index()
2018-08-31 10:05 UTC
[v3] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
2018-08-31 10:03 UTC
[v5] usb: core: phy: clean up return value check about devm_of_phy_get_by_index()
2018-08-31 10:01 UTC
usb: core: phy: clean up return value check about devm_of_phy_get_by_index()
2018-08-31 9:55 UTC
[v3] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
2018-08-31 9:41 UTC
[3/3] usb: renesas_usbhs: Add multiple clocks management
2018-08-31 7:44 UTC
[3/3] usb: renesas_usbhs: Add multiple clocks management
2018-08-31 7:22 UTC
[RFC,2/3] USB: core: Add non-coherent buffer allocation helpers
2018-08-31 6:51 UTC
[v4,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-31 6:51 UTC
[3/3] usb: renesas_usbhs: Add multiple clocks management
2018-08-31 6:48 UTC
[2/3] dt-bindings: usb: renesas_usbhs: add clock-names property
2018-08-31 6:48 UTC
[1/3] usb: renesas_usbhs: Add reset_control
2018-08-31 6:48 UTC
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-31 6:39 UTC
[RFC,2/3] USB: core: Add non-coherent buffer allocation helpers
2018-08-31 5:50 UTC
[2/3] usb: renesas_usbhs: enable DVSE interrupt
2018-08-31 3:17 UTC
[3/3] usb: renesas_usbhs: add suspend event support in gadget mode
2018-08-31 3:16 UTC
[RFC,2/3] USB: core: Add non-coherent buffer allocation helpers
2018-08-30 22:11 UTC
[v4,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-30 21:38 UTC
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-30 21:38 UTC
[v3,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-30 20:58 UTC
[v3,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-30 20:52 UTC
[v3,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-30 18:52 UTC
[RFC,3/3] stk1160: Use non-coherent buffers for USB transfers
2018-08-30 17:59 UTC
[RFC,2/3] USB: core: Add non-coherent buffer allocation helpers
2018-08-30 17:58 UTC
[RFC,3/3] stk1160: Use non-coherent buffers for USB transfers
2018-08-30 17:20 UTC
[RFC,2/3] USB: core: Add non-coherent buffer allocation helpers
2018-08-30 17:20 UTC
[RFC,1/3] HACK: ARM: dma-mapping: Get writeback memory for non-consistent mappings
2018-08-30 17:20 UTC
[6/6] usb: gadget: udc: renesas_usb3: Add r8a774a1 support
2018-08-30 12:09 UTC
[5/6] dt-bindings: usb: renesas_usbhs: Add r8a774a1 support
2018-08-30 12:09 UTC
[3/6] dt-bindings: usb-xhci: Add r8a774a1 support
2018-08-30 12:08 UTC
[3/3] usb: renesas_usbhs: add suspend event support in gadget mode
2018-08-30 10:54 UTC
[2/3] usb: renesas_usbhs: enable DVSE interrupt
2018-08-30 10:54 UTC
[1/3] usb: renesas_usbhs: simplify usbhs_status_get_device_state()
2018-08-30 10:54 UTC
[v1] USB: wusbcore: Switch to bitmap_zalloc()
2018-08-30 10:30 UTC
[2/2] usb: gadget: fsl_udc_core: fixup struct_udc_setup documentation
2018-08-30 10:16 UTC
[1/2] usb: gadget: fsl_udc_core: check allocation return value and cleanup on failure
2018-08-30 10:16 UTC
usb: misc: fix obsolete function
2018-08-30 9:31 UTC
Revert "cdc-acm: implement put_char() and flush_chars()"
2018-08-30 9:18 UTC
usb: gadget: atmel: remove pointless retrieval of DT name property
2018-08-30 9:16 UTC
[4/5] memstick: rtsx_usb_ms: Support runtime power management
2018-08-30 8:36 UTC
[v3,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-30 8:14 UTC
[v3,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-30 8:01 UTC
[V2,3/4] serial: f81232: implement break control
2018-08-30 1:55 UTC
[V2,4/4] USB: serial: f81232: fix bulk_in/out size
2018-08-30 1:47 UTC
[V2,3/4] USB: serial: f81232: implement break control
2018-08-30 1:47 UTC
[V2,3/4] serial: f81232: implement break control
2018-08-30 1:47 UTC
[V2,2/4] USB: serial: f81232: add high baud rate support
2018-08-30 1:47 UTC
[V2,1/4] USB: serial: f81232: clear overrun flag
2018-08-30 1:47 UTC
[v3] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
2018-08-30 1:16 UTC
[v2] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
2018-08-30 1:12 UTC
[1/6] usb: xhci-mtk: resume USB3 roothub first
2018-08-30 1:09 UTC
[v3,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-30 0:33 UTC
[v3,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-30 0:33 UTC
[v2,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-29 23:19 UTC
[v2,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-29 23:01 UTC
[v2,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-29 22:57 UTC
usb: gadget: atmel: remove pointless retrieval of DT name property
2018-08-29 20:01 UTC
[9/9] usb: dwc2: gadget: Add handler for WkupAlert interrupt
2018-08-29 17:02 UTC
[8/9] usb: dwc2: gadget: enable WKUP_ALERT interrupt
2018-08-29 17:02 UTC
[7/9] usb: dwc2: gadget: Program GREFCLK register
2018-08-29 17:01 UTC
[6/9] usb: dwc2: gadget: Add parameters for GREFCLK register
2018-08-29 17:01 UTC
[5/9] usb: dwc2: Add definitions for new registers
2018-08-29 17:01 UTC
[4/9] usb: dwc2: Update target (u)frame calculation
2018-08-29 17:00 UTC
[3/9] usb: dwc2: Add dwc2_gadget_dec_frame_num_by_one() function
2018-08-29 17:00 UTC
[2/9] usb: dwc2: Add core parameter for service interval support
2018-08-29 16:59 UTC
[1/9] usb: dwc2: Update registers definitions to support service interval
2018-08-29 16:59 UTC
[1/6] usb: xhci-mtk: resume USB3 roothub first
2018-08-29 9:13 UTC
[v2] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
2018-08-29 8:30 UTC
[v2,3/7] usb: chipidea: Support generic usb extcon
2018-08-29 8:06 UTC
option: Do not try to bind to ADB interfaces
2018-08-29 7:56 UTC
[v1] arm64: dts: dwc3: Add description of 'configure-gfladj'
2018-08-29 7:33 UTC
[6/6] usb: xhci-mtk: supports SSP without external USB3 gen2 hub
2018-08-29 2:55 UTC
[5/6] usb: xhci-mtk: supports bandwidth scheduling with multi-TT
2018-08-29 2:55 UTC
[4/6] usb: xhci-mtk: improve bandwidth scheduling
2018-08-29 2:55 UTC
[3/6] usb: xhci-mtk: fix ISOC error when interval is zero
2018-08-29 2:55 UTC
[2/6] usb: xhci-mtk: use maximum ESIT payload of endpiont context
2018-08-29 2:55 UTC
[1/6] usb: xhci-mtk: resume USB3 roothub first
2018-08-29 2:55 UTC
[2/2] usb: mtu3: disable vbus rise/fall interrupts of ltssm
2018-08-29 2:36 UTC
[1/2] usb: mtu3: fix error of xhci port id when enable U3 dual role
2018-08-29 2:36 UTC
[v2] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
2018-08-29 2:10 UTC
usb: dwc2: host: use hrtimer for NAK retries
2018-08-28 18:23 UTC
usb: dwc2: host: use hrtimer for NAK retries
2018-08-28 18:04 UTC
[v2] USB: serial: ftdi_sio: implement GPIO support for FT230X
2018-08-28 17:42 UTC
usb: dwc2: host: use hrtimer for NAK retries
2018-08-28 16:51 UTC
USB: OHCI: Remove USB bus reset delay from OHCI handover code
2018-08-28 14:57 UTC
[RFT] Remove USB bus reset delay from OHCI handover code
2018-08-28 14:11 UTC
usb: host: xhci-rcar: Add support for r8a774a1
2018-08-28 9:00 UTC
usb: renesas_usbhs: Add a compatible string for r8a774a1
2018-08-28 7:38 UTC
[v2,2/7] doc: usb: ci-hdrc-usb2: Add pinctrl properties definition
2018-08-28 6:35 UTC
[v2,3/7] usb: chipidea: Support generic usb extcon
2018-08-28 6:33 UTC
USB: Removing NULL check for pool since dma_pool_destroy is safe
2018-08-28 1:24 UTC
USB: serial: ftdi_sio: implement GPIO support for FT230X
2018-08-28 0:44 UTC
usb: dwc2: Fix call location of dwc2_check_core_endianness
2018-08-27 21:36 UTC
option: Do not try to bind to ADB interfaces
2018-08-27 16:15 UTC
[v1] usb: dwc3: core: Clean up ULPI device
2018-08-27 15:30 UTC
[v2] usb: musb: gadget: Fix big-endian arch issue
2018-08-27 15:19 UTC
usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already started
2018-08-27 13:59 UTC
option: Do not try to bind to ADB interfaces
2018-08-27 13:28 UTC
[v2,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-27 12:47 UTC
[6/7] usb: gadget: f_uac2: disable IN/OUT ep if unused
2018-08-27 12:28 UTC
[v2,1/7] usb: chipidea: Add dynamic pinctrl selection
2018-08-27 11:57 UTC
[v2,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-27 10:59 UTC
[v2,7/7] arm: dts: qcom: db410c: Enable USB OTG support
2018-08-27 9:33 UTC
[v2,6/7] phy: qcom-usb-hs: Fix unbalanced notifier registration
2018-08-27 9:33 UTC
[v2,5/7] usb: chipidea: Fix otg event handler
2018-08-27 9:33 UTC
[v2,4/7] usb: chipidea: Prevent unbalanced IRQ disable
2018-08-27 9:33 UTC
[v2,3/7] usb: chipidea: Support generic usb extcon
2018-08-27 9:33 UTC
[v2,2/7] doc: usb: ci-hdrc-usb2: Add pinctrl properties definition
2018-08-27 9:33 UTC
[v2,1/7] usb: chipidea: Add dynamic pinctrl selection
2018-08-27 9:33 UTC
[v2] usb: iowarrior: replace kmalloc with kmalloc_array
2018-08-27 9:13 UTC
[v2,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-27 8:47 UTC
usb: host: xhci-rcar: Add support for r8a774a1
2018-08-27 5:04 UTC
usb: renesas_usbhs: Add a compatible string for r8a774a1
2018-08-27 4:59 UTC
usb: dwc2: host: use hrtimer for NAK retries
2018-08-26 16:30 UTC
usb: dwc2: host: use hrtimer for NAK retries
2018-08-26 3:45 UTC
USB: serial: ftdi_sio: implement GPIO support for FT230X
2018-08-25 20:47 UTC
[v2,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-25 16:35 UTC
[v2,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-25 16:29 UTC
[4.4,18/31] r8152: napi hangup fix after disconnect
2018-08-25 7:43 UTC
[RFT] Remove USB bus reset delay from OHCI handover code
2018-08-25 7:34 UTC
[v2,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-24 21:33 UTC
[v2,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-24 21:33 UTC
[2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-24 20:53 UTC
[2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-24 19:59 UTC
[1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-24 19:59 UTC
[4.4,18/31] r8152: napi hangup fix after disconnect
2018-08-24 16:38 UTC
usb: host: xhci-rcar: Add support for r8a774a1
2018-08-24 10:16 UTC
usb: renesas_usbhs: Add a compatible string for r8a774a1
2018-08-24 10:09 UTC
[1/6] usb: chipidea: Add dynamic pinctrl selection
2018-08-24 9:40 UTC
[5/6] phy: qcom-usb-hs: Fix unbalanced notifier registration
2018-08-24 9:17 UTC
[6/6] usb: gadget: udc: renesas_usb3: Add r8a774a1 support
2018-08-24 7:56 UTC
[5/6] dt-bindings: usb: renesas_usbhs: Add r8a774a1 support
2018-08-24 7:56 UTC
[3/6] dt-bindings: usb-xhci: Add r8a774a1 support
2018-08-24 7:56 UTC
[4/5] memstick: rtsx_usb_ms: Support runtime power management
2018-08-24 6:30 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).