messages from 2018-08-31 14:20:24 to 2018-09-06 15:34:04 UTC [more...]
[2/2] USB: usbdevfs: restore warning for nonsensical flags
2018-09-06 15:34 UTC
[v2,1/8] usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
2018-09-06 15:12 UTC
[v6,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-06 14:43 UTC
Possible race condition in f_mass_storage gadget during deinitialization. Kernel warning issued
2018-09-06 12:22 UTC
[v3,3/3] usb: renesas_usbhs: Add multiple clocks management
2018-09-06 12:09 UTC
[v6,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-06 11:27 UTC
[v6,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-06 11:26 UTC
[2/2] USB: usbdevfs: restore warning for nonsensical flags
2018-09-06 10:01 UTC
usb: dwc2: disable power_down on Amlogic devices
2018-09-06 8:36 UTC
[v3,3/3] usb: renesas_usbhs: Add multiple clocks management
2018-09-06 7:28 UTC
[v3,3/3] usb: renesas_usbhs: Add multiple clocks management
2018-09-06 6:49 UTC
[RFC] usb: dwc2: power off during shutdown
2018-09-06 6:33 UTC
[v6,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-06 6:19 UTC
[v6,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-06 6:17 UTC
[v3,3/3] usb: renesas_usbhs: Add multiple clocks management
2018-09-06 5:50 UTC
[v3,2/3] dt-bindings: usb: renesas_usbhs: add clock-names property
2018-09-06 5:50 UTC
[v3,1/3] usb: renesas_usbhs: Add reset_control
2018-09-06 5:50 UTC
usb: Change usb_of_get_companion_dev() place to usb/common
2018-09-06 4:42 UTC
[v2,3/3] usb: renesas_usbhs: Add multiple clocks management
2018-09-06 3:19 UTC
[v2,1/8] usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
2018-09-06 1:58 UTC
[v5,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-05 22:31 UTC
[v6,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-05 22:20 UTC
[v6,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-05 22:20 UTC
[v5,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-05 22:17 UTC
[v6,3/4] arm64: dts: dwc3: description of incr burst type
2018-09-05 20:52 UTC
[v1] arm64: dts: dwc3: Add description of 'configure-gfladj'
2018-09-05 20:08 UTC
[RFC] usb: dwc2: power off during shutdown
2018-09-05 18:42 UTC
[v5,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-05 18:04 UTC
[v2] Revert "cdc-acm: implement put_char() and flush_chars()"
2018-09-05 15:56 UTC
usb: dwc2: disable power_down on Amlogic devices
2018-09-05 14:55 UTC
[V2,4/4] USB: serial: f81232: fix bulk_in/out size
2018-09-05 14:46 UTC
[V2,3/4] USB: serial: f81232: implement break control
2018-09-05 14:41 UTC
[V2,1/4] USB: serial: f81232: clear overrun flag
2018-09-05 14:39 UTC
[v2,3/3] usb: renesas_usbhs: Add multiple clocks management
2018-09-05 13:59 UTC
[2/2] USB: usbdevfs: restore warning for nonsensical flags
2018-09-05 13:07 UTC
[2/2] USB: usbdevfs: restore warning for nonsensical flags
2018-09-05 13:02 UTC
Revert "cdc-acm: implement put_char() and flush_chars()"
2018-09-05 12:49 UTC
[v5,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-05 12:31 UTC
[v5,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-05 12:26 UTC
[2/2] USB: usbdevfs: restore warning for nonsensical flags
2018-09-05 12:19 UTC
[4/4] usb: dwc2: fix unbalanced use of external vbus-supply
2018-09-05 11:40 UTC
[3/4] usb: dwc2: fix call to vbus supply exit routine, call it unlocked
2018-09-05 11:40 UTC
[2/4] usb: dwc2: fix a race with external vbus supply
2018-09-05 11:40 UTC
[1/4] usb: dwc2: get optional vbus-supply regulator once
2018-09-05 11:40 UTC
[hid:for-4.20/microsoft,2/2] hid-microsoft.c:undefined reference to `input_ff_create_memless'
2018-09-05 11:27 UTC
[v2,2/2] Embedded USB Debugger (EUD) driver
2018-09-05 11:18 UTC
[RFC] USB: serial: ftdi_sio: add support for FT232R CBUS gpios
2018-09-05 10:49 UTC
USB: serial: ftdi_sio: implement GPIO support for FT230X
2018-09-05 10:36 UTC
[2/2] USB: usbdevfs: restore warning for nonsensical flags
2018-09-05 10:07 UTC
[1/2] USB: usbdevfs: sanitize flags more
2018-09-05 10:07 UTC
[v2,2/2] Embedded USB Debugger (EUD) driver
2018-09-05 9:31 UTC
[v2,4/8] usb: dwc3: implement stream transfer timeout
2018-09-05 9:24 UTC
[v2,3/8] usb: dwc3: make controller clear transfer resources after complete
2018-09-05 9:21 UTC
[v2,1/8] usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
2018-09-05 9:19 UTC
[RFC] usb: dwc2: power off during shutdown
2018-09-05 8:37 UTC
[v3] USB: serial: ftdi_sio: Add support for CBUS GPIO
2018-09-05 8:25 UTC
USB: serial: ftdi_sio: implement GPIO support for FT230X
2018-09-05 8:21 UTC
USB: serial: ftdi_sio: implement GPIO support for FT230X
2018-09-05 8:19 UTC
USB: change dev_WARN to dev_err triggerable from user space
2018-09-05 7:40 UTC
[v3] USB: serial: ftdi_sio: Add support for CBUS GPIO
2018-09-05 6:44 UTC
[v2,4/8] usb: dwc3: implement stream transfer timeout
2018-09-05 6:01 UTC
[01/25] tty: Change return type to void
2018-09-05 5:57 UTC
[v2,3/8] usb: dwc3: make controller clear transfer resources after complete
2018-09-05 5:38 UTC
[v2,1/8] usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
2018-09-05 5:33 UTC
[v3,4/6] usb: chipidea: Fix otg event handler
2018-09-05 3:25 UTC
[v2,2/2] Embedded USB Debugger (EUD) driver
2018-09-04 21:34 UTC
[v2,1/2] dt-bindings: Documentation for qcom,eud
2018-09-04 21:34 UTC
[v2] usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
2018-09-04 19:32 UTC
usb: Don't die twice if PCI xhci host is not responding in resume
2018-09-04 19:22 UTC
[net-next] net: usbnet: mark expected switch fall-through
2018-09-04 19:20 UTC
USB: change dev_WARN to dev_err triggerable from user space
2018-09-04 19:18 UTC
USB: serial: ftdi_sio: implement GPIO support for FT230X
2018-09-04 18:07 UTC
USB: serial: ftdi_sio: implement GPIO support for FT230X
2018-09-04 17:53 UTC
[V2,4/4,next] net: lan78xx: Make declaration style consistent
2018-09-04 17:29 UTC
[V2,3/4,next] net: lan78xx: Switch to SPDX identifier
2018-09-04 17:29 UTC
[V2,2/4,next] net: lan78xx: Drop unnecessary strcpy in lan78xx_probe
2018-09-04 17:29 UTC
[V2,1/4,next] net: lan78xx: Bail out if lan78xx_get_endpoints fails
2018-09-04 17:29 UTC
[v3,6/6] arm: dts: qcom: db410c: Enable USB OTG support
2018-09-04 15:19 UTC
[v3,5/6] phy: qcom-usb-hs: Fix unbalanced notifier registration
2018-09-04 15:18 UTC
[v3,4/6] usb: chipidea: Fix otg event handler
2018-09-04 15:18 UTC
[v3,3/6] usb: chipidea: Prevent unbalanced IRQ disable
2018-09-04 15:18 UTC
[v3,2/6] doc: usb: ci-hdrc-usb2: Add pinctrl properties definition
2018-09-04 15:18 UTC
[v3,1/6] usb: chipidea: Add dynamic pinctrl selection
2018-09-04 15:18 UTC
[1/6] usb: xhci-mtk: resume USB3 roothub first
2018-09-04 14:44 UTC
usb: Don't die twice if PCI xhci host is not responding in resume
2018-09-04 14:35 UTC
USB: serial: ftdi_sio: implement GPIO support for FT230X
2018-09-04 12:49 UTC
[v3] USB: serial: ftdi_sio: Add support for CBUS GPIO
2018-09-04 12:47 UTC
[v3,10/10] usb: typec: fusb302: reorganizing the probe function a little
2018-09-04 11:22 UTC
[v3,09/10] platform: x86: intel_cht_int33fe: Remove the old connections for the muxes
2018-09-04 11:22 UTC
[v3,08/10] usb: typec: class: Don't use port parent for getting mux handles
2018-09-04 11:22 UTC
[v3,07/10] platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
2018-09-04 11:22 UTC
[v3,06/10] platform: x86: intel_cht_int33fe: Add connection for the DP alt mode
2018-09-04 11:22 UTC
[v3,05/10] platform: x86: intel_cht_int33fe: Register all connections at once
2018-09-04 11:22 UTC
[v3,04/10] drivers: base: Helpers for adding device connection descriptions
2018-09-04 11:22 UTC
[v3,03/10] platform: x86: intel_cht_int33fe: Add dependency on muxes
2018-09-04 11:22 UTC
[v3,02/10] usb: roles: Handle driver reference counting
2018-09-04 11:22 UTC
[v3,01/10] usb: typec: Take care of driver module reference counting
2018-09-04 11:22 UTC
USB: change dev_WARN to dev_err triggerable from user space
2018-09-04 11:15 UTC
[01/25] tty: Change return type to void
2018-09-04 10:45 UTC
USB: change dev_WARN to dev_err triggerable from user space
2018-09-04 10:21 UTC
USB: change dev_WARN to dev_err triggerable from user space
2018-09-04 9:31 UTC
USB: change dev_WARN to dev_err triggerable from user space
2018-09-04 8:44 UTC
[v2,06/10] platform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
2018-09-04 7:47 UTC
[v2,06/10] platform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
2018-09-04 7:44 UTC
[v2,06/10] platform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
2018-09-04 7:40 UTC
linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id
2018-09-04 7:40 UTC
usb/typec: fix kernel-doc notation warning for typec_match_altmode
2018-09-04 7:38 UTC
[v2,06/10] platform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
2018-09-04 7:37 UTC
[3/4,next] net: lan78xx: Switch to SPDX identifier
2018-09-04 7:32 UTC
[3/4,next] net: lan78xx: Switch to SPDX identifier
2018-09-04 7:26 UTC
[3/4,next] net: lan78xx: Switch to SPDX identifier
2018-09-04 4:29 UTC
[4/4,next] net: lan78xx: Make declaration style consistent
2018-09-04 4:23 UTC
[2/4,next] net: lan78xx: Drop unnecessary strcpy in lan78xx_probe
2018-09-04 4:22 UTC
[1/4,next] net: lan78xx: Bail out if lan78xx_get_endpoints fails
2018-09-04 4:20 UTC
[25/25] usb: usb-serial: Change return type to void
2018-09-04 2:44 UTC
[24/25] usb: cdc-acm: Change return type to void
2018-09-04 2:44 UTC
[23/25] tty: vcc: Change return type to void
2018-09-04 2:44 UTC
[22/25] tty: nozomi: Change return type to void
2018-09-04 2:44 UTC
[21/25] staging: greybus: uart: Change return type to void
2018-09-04 2:44 UTC
[20/25] staging: gdm724x: gdm_tty: Change return type to void
2018-09-04 2:44 UTC
[19/25] staging: fwserial: Change return type to void
2018-09-04 2:44 UTC
[18/25] mmc: core: sdio_uart: Change return type to void
2018-09-04 2:44 UTC
[17/25] misc: pti: Change return type to void
2018-09-04 2:44 UTC
[16/25] isdn: capi: Change return type to void
2018-09-04 2:44 UTC
[15/25] um: Change return type to void
2018-09-04 2:44 UTC
[14/25] Bluetooth: Change return type to void
2018-09-04 2:44 UTC
[13/25] usb: xhci: dbc: Change return type to void
2018-09-04 2:44 UTC
[12/25] tty: vt: Change return type to void
2018-09-04 2:44 UTC
[11/25] tty: synclinkmp: Change return type to void
2018-09-04 2:44 UTC
[10/25] tty: synclink: Change return type to void
2018-09-04 2:44 UTC
[09/25] tty: serial: kgdb_nmi: Change return type to void
2018-09-04 2:44 UTC
[08/25] tty: n_gsm: Change return type to void
2018-09-04 2:44 UTC
[07/25] tty: mips_ejtag_fdc: Change return type to void
2018-09-04 2:44 UTC
[06/25] tty: hvc: hvcs: Change return type to void
2018-09-04 2:44 UTC
[05/25] tty: hvc: hvc_console: Change return type to void
2018-09-04 2:44 UTC
[04/25] s390: char: tty3270: Change return type to void
2018-09-04 2:44 UTC
[03/25] s390: char: con3215: Change return type to void
2018-09-04 2:44 UTC
[02/25] isdn: i4l: isdn_tty: Change return type to void
2018-09-04 2:44 UTC
[01/25] tty: Change return type to void
2018-09-04 2:44 UTC
usb/typec: fix kernel-doc notation warning for typec_match_altmode
2018-09-03 19:58 UTC
linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id
2018-09-03 19:51 UTC
[net-next] net: usbnet: mark expected switch fall-through
2018-09-03 18:48 UTC
[v5] usb: core: phy: clean up return value check about devm_of_phy_get_by_index()
2018-09-03 18:09 UTC
[4/4,next] net: lan78xx: Make declaration style consistent
2018-09-03 17:12 UTC
[3/4,next] net: lan78xx: Switch to SPDX identifier
2018-09-03 17:12 UTC
[2/4,next] net: lan78xx: Drop unnecessary strcpy in lan78xx_probe
2018-09-03 17:12 UTC
[1/4,next] net: lan78xx: Bail out if lan78xx_get_endpoints fails
2018-09-03 17:12 UTC
[4.9,012/107] usb/phy: fix PPC64 build errors in phy-fsl-usb.c
2018-09-03 16:55 UTC
[4.14,024/165] usb/phy: fix PPC64 build errors in phy-fsl-usb.c
2018-09-03 16:55 UTC
[3.18,12/56] usb/phy: fix PPC64 build errors in phy-fsl-usb.c
2018-09-03 16:49 UTC
[4.4,14/80] usb/phy: fix PPC64 build errors in phy-fsl-usb.c
2018-09-03 16:48 UTC
[v2,06/10] platform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
2018-09-03 14:59 UTC
usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier match
2018-09-03 14:10 UTC
[v2,10/10] usb: typec: fusb302: reorganizing the probe function a little
2018-09-03 13:36 UTC
[v2,09/10] platform: x86: intel_cht_int33fe: Remove the old connections for the muxes
2018-09-03 13:36 UTC
[v2,08/10] usb: typec: class: Don't use port parent for getting mux handles
2018-09-03 13:36 UTC
[v2,07/10] platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
2018-09-03 13:36 UTC
[v2,06/10] platform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
2018-09-03 13:36 UTC
[v2,05/10] platform: x86: intel_cht_int33fe: Register all connections at once
2018-09-03 13:36 UTC
[v2,04/10] drivers: base: Helpers for adding device connection descriptions
2018-09-03 13:36 UTC
[v2,03/10] platform: x86: intel_cht_int33fe: Add dependency on muxes
2018-09-03 13:36 UTC
[v2,02/10] usb: roles: Handle driver reference counting
2018-09-03 13:36 UTC
[v2,01/10] usb: typec: Take care of driver module reference counting
2018-09-03 13:36 UTC
usb: xhci: tegra: Firmware header is little endian
2018-09-03 12:50 UTC
[v2] usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
2018-09-03 12:44 UTC
usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
2018-09-03 12:36 UTC
usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier match
2018-09-03 12:36 UTC
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
2018-09-03 11:01 UTC
usb: xhci: tegra: Firmware header is little endian
2018-09-03 10:18 UTC
usb: dwc2: Fix call location of dwc2_check_core_endianness
2018-09-03 8:09 UTC
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
2018-09-03 8:01 UTC
usb: typec: fix kernel-doc parameter warning
2018-09-03 7:20 UTC
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
2018-09-03 7:15 UTC
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
2018-09-03 6:01 UTC
usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier match
2018-09-03 4:14 UTC
usb/dwc3/gadget: fix kernel-doc parameter warning
2018-09-03 2:39 UTC
usb: typec: fix kernel-doc parameter warning
2018-09-03 2:30 UTC
[v1] arm64: dts: dwc3: Add description of 'configure-gfladj'
2018-09-03 1:19 UTC
usb: chipidea: imx: do not use preprocessor conditionals for PM
2018-09-02 17:37 UTC
usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier match
2018-09-02 17:36 UTC
usb: dwc2: Fix call location of dwc2_check_core_endianness
2018-09-01 22:43 UTC
[2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-01 18:31 UTC
[v2] usb: host: fotg2: add silicon clock handling
2018-09-01 16:03 UTC
[RFC] usb: dwc2: power off during shutdown
2018-09-01 9:54 UTC
usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()
2018-09-01 9:23 UTC
usb: misc: uss720: Fix two sleep-in-atomic-context bugs
2018-09-01 8:25 UTC
[v2] usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
2018-09-01 8:12 UTC
usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
2018-09-01 8:03 UTC
[v4,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-31 20:41 UTC
[v5,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-08-31 20:22 UTC
[v5,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-31 20:22 UTC
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-31 20:01 UTC
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-08-31 19:24 UTC
usb: core: added uevent for over-current
2018-08-31 17:14 UTC
usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
2018-08-31 14:39 UTC
[2/2] xhci: Fix use after free for URB cancellation on a reallocated endpoint
2018-08-31 14:24 UTC
[1/2] usb: host: xhci-plat: Iterate over parent nodes for finding quirks
2018-08-31 14:24 UTC
[8/8] plarform: x86: intel_cht_int33fe: Remove the old connections for the muxes
2018-08-31 14:20 UTC
[7/8] usb: typec: class: Don't use port parent for getting mux handles
2018-08-31 14:20 UTC
[6/8] plarform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
2018-08-31 14:20 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).