messages from 2018-09-11 10:10:36 to 2018-09-18 10:27:58 UTC [more...]
[v4] USB: serial: ftdi_sio: implement GPIO support for FT-X devices
2018-09-18 10:27 UTC
[v4] USB: serial: ftdi_sio: implement GPIO support for FT-X devices
2018-09-18 9:45 UTC
usb: gadget: uvc: configfs: Sort frame intervals upon writing
2018-09-18 9:39 UTC
[v4] USB: serial: ftdi_sio: implement GPIO support for FT-X devices
2018-09-18 9:35 UTC
[v4] USB: serial: ftdi_sio: implement GPIO support for FT-X devices
2018-09-18 9:16 UTC
[v3] USB: serial: ftdi_sio: implement GPIO support for FT-X devices
2018-09-18 8:54 UTC
[4/4] arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs
2018-09-18 8:16 UTC
[3/4] usb: dwc3: exynos: Add support for Exynos5433 variant with all clocks
2018-09-18 8:16 UTC
[2/4] usb: dwc3: exynos: Rework clock handling and prepare for new variants
2018-09-18 8:16 UTC
[1/4] usb: dwc3: exynos: Remove dead code
2018-09-18 8:16 UTC
usb: phy: mxs: fix spelling mistake "stardard" -> "standard"
2018-09-18 6:54 UTC
[net,stable] qmi_wwan: set DTR for modems in forced USB2 mode
2018-09-18 2:23 UTC
[net,stable] qmi_wwan: set DTR for modems in forced USB2 mode
2018-09-17 20:21 UTC
[net,stable] qmi_wwan: set DTR for modems in forced USB2 mode
2018-09-17 20:00 UTC
[1/1] usb: musb: dsps: do not disable CPPI41 irq in driver teardown
2018-09-17 16:40 UTC
net: usb: remove redundant null pointer check before of_node_put
2018-09-17 15:20 UTC
[v2,05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
2018-09-17 9:33 UTC
[2/3] xhci: Avoid USB autosuspend when resuming USB2 ports
2018-09-17 8:24 UTC
[1/5] misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
2018-09-17 8:07 UTC
[07/10] usb: typec: pci: Enable Intel USB role mux on Apollo Lake platforms
2018-09-17 7:47 UTC
[3/3] xhci: Add missing CAS workaround for Intel Sunrise Point xHCI
2018-09-17 7:45 UTC
[01/10] usb: xhci-mtk: resume USB3 roothub first
2018-09-17 7:35 UTC
usb: core: safely deal with the dynamic quirk lists
2018-09-17 7:05 UTC
[1/3] usb: xhci: tegra: Firmware header is little endian
2018-09-17 6:40 UTC
[v2,02/17] compat_ioctl: move drivers to generic_compat_ioctl_ptrarg
2018-09-16 19:07 UTC
[v4] USB: serial: ftdi_sio: implement GPIO support for FT-X devices
2018-09-16 17:58 UTC
net: usb: remove redundant null pointer check before of_node_put
2018-09-16 13:20 UTC
[v5,8/8] usb: dwc3: Check MISSED ISOC bit only for ISOC endpoints
2018-09-15 14:30 UTC
[v5,7/8] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-09-15 14:30 UTC
[v5,6/8] usb: dwc3: check for requests in started list for stream capable endpoints
2018-09-15 14:29 UTC
[v5,5/8] usb: dwc3: don't issue no-op trb for stream capable endpoints
2018-09-15 14:29 UTC
[v5,4/8] usb: dwc3: implement stream transfer timeout
2018-09-15 14:29 UTC
[v5,3/8] usb: dwc3: make controller clear transfer resources after complete
2018-09-15 14:29 UTC
[v5,2/8] usb: dwc3: update stream id in depcmd
2018-09-15 14:29 UTC
[v5,1/8] usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
2018-09-15 14:29 UTC
[v4,4/8] usb: dwc3: implement stream transfer timeout
2018-09-15 13:20 UTC
usb: gadget: udc: fotg210-udc: Fix a sleep-in-atomic-context bug in fotg210_get_status()
2018-09-15 3:04 UTC
[v2,05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
2018-09-14 20:57 UTC
[v2,05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
2018-09-14 20:35 UTC
[2/2] typec: tcpm: Add option to maintain current limit at Vsafe5V
2018-09-14 18:42 UTC
usb: gadget: udc: atmel: handle at91sam9rl PMC
2018-09-14 17:14 UTC
[v3] USB: serial: ftdi_sio: implement GPIO support for FT-X devices
2018-09-14 16:54 UTC
[v3] USB: serial: ftdi_sio: implement GPIO support for FT-X devices
2018-09-14 16:11 UTC
[v2,05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
2018-09-14 14:23 UTC
[01/10] usb: xhci-mtk: resume USB3 roothub first
2018-09-14 13:27 UTC
[07/10] usb: typec: pci: Enable Intel USB role mux on Apollo Lake platforms
2018-09-14 13:27 UTC
[3/3] xhci: Add missing CAS workaround for Intel Sunrise Point xHCI
2018-09-14 13:01 UTC
[1/3] usb: xhci: tegra: Firmware header is little endian
2018-09-14 13:01 UTC
[2/3] xhci: Avoid USB autosuspend when resuming USB2 ports
2018-09-14 13:00 UTC
[3/3] xhci: Add missing CAS workaround for Intel Sunrise Point xHCI
2018-09-14 12:33 UTC
[2/3] xhci: Avoid USB autosuspend when resuming USB2 ports
2018-09-14 12:33 UTC
[1/3] usb: xhci: tegra: Firmware header is little endian
2018-09-14 12:33 UTC
[1/2] typec: tcpm: Do not disconnect link for self powered devices
2018-09-14 9:54 UTC
usbcore: Select UAC3 configuration for audio if present
2018-09-14 9:22 UTC
usb: core: safely deal with the dynamic quirk lists
2018-09-14 8:58 UTC
option: Improve Quectel EP06 detection
2018-09-14 8:42 UTC
option: Improve Quectel EP06 detection
2018-09-14 7:53 UTC
option: Improve Quectel EP06 detection
2018-09-14 7:51 UTC
[v3] usb: typec: get the vbus source and charge values from the devicetree
2018-09-14 0:38 UTC
[v3] usb: typec: get the vbus source and charge values from the devicetree
2018-09-14 0:25 UTC
[2/2] typec: tcpm: Add option to maintain current limit at Vsafe5V
2018-09-13 23:38 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-13 23:32 UTC
[1/2] typec: tcpm: Do not disconnect link for self powered devices
2018-09-13 23:16 UTC
[v4,4/8] usb: dwc3: implement stream transfer timeout
2018-09-13 21:24 UTC
[1/2] typec: tcpm: Do not disconnect link for self powered devices
2018-09-13 17:51 UTC
[v3] usb: typec: get the vbus source and charge values from the devicetree
2018-09-13 17:34 UTC
[2/2] typec: tcpm: Add option to maintain current limit at Vsafe5V
2018-09-13 17:07 UTC
option: Improve Quectel EP06 detection
2018-09-13 15:13 UTC
[2/2] typec: tcpm: Add option to maintain current limit at Vsafe5V
2018-09-13 13:45 UTC
[2/2] typec: tcpm: Add option to maintain current limit at Vsafe5V
2018-09-13 13:43 UTC
[1/5] misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
2018-09-13 13:41 UTC
[1/2] typec: tcpm: Do not disconnect link for self powered devices
2018-09-13 13:24 UTC
[10/10] xhci-pci: allow host runtime PM as default for Intel Alpine and Titan Ridge
2018-09-13 12:24 UTC
[09/10] xhci: Use soft retry to recover faster from transaction errors
2018-09-13 12:24 UTC
[08/10] usb: host: xhci-plat: add platform TPL support
2018-09-13 12:24 UTC
[07/10] usb: typec: pci: Enable Intel USB role mux on Apollo Lake platforms
2018-09-13 12:24 UTC
[06/10] usb: xhci-mtk: supports SSP without external USB3 gen2 hub
2018-09-13 12:23 UTC
[05/10] usb: xhci-mtk: supports bandwidth scheduling with multi-TT
2018-09-13 12:23 UTC
[04/10] usb: xhci-mtk: improve bandwidth scheduling
2018-09-13 12:23 UTC
[03/10] usb: xhci-mtk: fix ISOC error when interval is zero
2018-09-13 12:23 UTC
[02/10] usb: xhci-mtk: use maximum ESIT payload of endpiont context
2018-09-13 12:23 UTC
[01/10] usb: xhci-mtk: resume USB3 roothub first
2018-09-13 12:23 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-13 11:11 UTC
[v3] usb: typec: get the vbus source and charge values from the devicetree
2018-09-13 11:10 UTC
usbcore: Select UAC3 configuration for audio if present
2018-09-13 11:06 UTC
[v2,03/17] compat_ioctl: use correct compat_ptr() translation in drivers
2018-09-13 11:03 UTC
[1/5] misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
2018-09-13 10:31 UTC
[1/1] usb: host: xhci-plat: add platform TPL support
2018-09-13 10:28 UTC
option: Improve Quectel EP06 detection
2018-09-13 9:44 UTC
usb: dwc3: add EXTCON dependency for qcom
2018-09-13 9:37 UTC
[2/2] USB: serial: option: add two-endpoints device-id flag
2018-09-13 9:21 UTC
[1/2] USB: serial: option: improve Quectel EP06 detection
2018-09-13 9:21 UTC
option: Improve Quectel EP06 detection
2018-09-13 9:17 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-13 7:36 UTC
[v3] usb: typec: get the vbus source and charge values from the devicetree
2018-09-13 7:27 UTC
[1/1] usb: host: xhci-plat: add platform TPL support
2018-09-13 6:54 UTC
usb: dwc2: disable power_down on rockchip devices
2018-09-13 6:52 UTC
usb: dwc2: disable power_down on rockchip devices
2018-09-13 6:52 UTC
[2/2] typec: tcpm: Add option to maintain current limit at Vsafe5V
2018-09-13 6:39 UTC
usb: dwc2: remove set but unused variable
2018-09-13 6:36 UTC
[2/2] typec: tcpm: Add option to maintain current limit at Vsafe5V
2018-09-13 2:11 UTC
[1/2] typec: tcpm: Do not disconnect link for self powered devices
2018-09-13 2:11 UTC
[v2,03/17] compat_ioctl: use correct compat_ptr() translation in drivers
2018-09-13 0:48 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-12 22:22 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-12 21:57 UTC
option: Improve Quectel EP06 detection
2018-09-12 20:34 UTC
option: Improve Quectel EP06 detection
2018-09-12 19:18 UTC
[4.4,18/31] r8152: napi hangup fix after disconnect
2018-09-12 18:54 UTC
option: Improve Quectel EP06 detection
2018-09-12 18:25 UTC
usb: dwc2: remove set but unused variable
2018-09-12 18:16 UTC
[v2,02/17] compat_ioctl: move drivers to generic_compat_ioctl_ptrarg
2018-09-12 18:13 UTC
[v2,05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
2018-09-12 18:13 UTC
[v2,03/17] compat_ioctl: use correct compat_ptr() translation in drivers
2018-09-12 18:13 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-12 18:02 UTC
option: Improve Quectel EP06 detection
2018-09-12 16:57 UTC
[v3] usb: typec: get the vbus source and charge values from the devicetree
2018-09-12 16:32 UTC
option: Improve Quectel EP06 detection
2018-09-12 16:32 UTC
[v2,02/17] compat_ioctl: move drivers to generic_compat_ioctl_ptrarg
2018-09-12 16:20 UTC
[v3] usb: typec: get the vbus source and charge values from the devicetree
2018-09-12 16:08 UTC
[v2,05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
2018-09-12 16:01 UTC
[v2,05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
2018-09-12 15:58 UTC
[v2,05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
2018-09-12 15:56 UTC
[v2,02/17] compat_ioctl: move drivers to generic_compat_ioctl_ptrarg
2018-09-12 15:33 UTC
usb: dwc2: disable power_down on rockchip devices
2018-09-12 15:21 UTC
[v2,05/17] compat_ioctl: move more drivers to generic_compat_ioctl_ptrarg
2018-09-12 15:08 UTC
[v2,03/17] compat_ioctl: use correct compat_ptr() translation in drivers
2018-09-12 15:01 UTC
[v2,02/17] compat_ioctl: move drivers to generic_compat_ioctl_ptrarg
2018-09-12 15:01 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-12 11:02 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-12 10:25 UTC
[v11,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-12 10:19 UTC
[v6,22/22] usb: usbtmc: Remove sysfs group TermChar and auto_abort
2018-09-12 8:51 UTC
[v6,21/22] usb: usbtmc: Fix split quoted string in debug message
2018-09-12 8:51 UTC
[v6,20/22] usb: usbtmc: Remove redundant macro USBTMC_SIZE_IOBUFFER
2018-09-12 8:51 UTC
[v6,19/22] usb: usbtmc: Remove redundant code
2018-09-12 8:51 UTC
[v6,18/22] usb: usbtmc: Update ioctl-number.txt
2018-09-12 8:51 UTC
[v6,17/22] usb: usbtmc: Add ioctl USBTMC_IOCTL_API_VERSION
2018-09-12 8:51 UTC
[v6,16/22] usb: usbtmc: Replace USBTMC_TIMEOUT macros for control messages
2018-09-12 8:51 UTC
[v6,15/22] usb: usbtmc: Fix ioctl USBTMC_IOCTL_ABORT_BULK_OUT
2018-09-12 8:51 UTC
[v6,14/22] usb: usbtmc: Fix ioctl USBTMC_IOCTL_ABORT_BULK_IN
2018-09-12 8:51 UTC
[v6,13/22] usb: usbtmc: Fix ioctl USBTMC_IOCTL_CLEAR
2018-09-12 8:51 UTC
[v6,12/22] usb: usbtmc: Optimize usbtmc_read
2018-09-12 8:51 UTC
[v6,11/22] usb: usbtmc: Optimize usbtmc_write
2018-09-12 8:51 UTC
[v6,10/22] usb: usbtmc: Add ioctl USBTMC_IOCTL_AUTO_ABORT
2018-09-12 8:51 UTC
[v6,09/22] usb: usbtmc: add ioctl USBTMC_IOCTL_MSG_IN_ATTR
2018-09-12 8:50 UTC
[v6,08/22] usb: usbtmc: Add ioctl USBTMC488_IOCTL_WAIT_SRQ
2018-09-12 8:50 UTC
[v6,07/22] usb: usbtmc: Fix suspend/resume
2018-09-12 8:50 UTC
[v6,06/22] usb: usbtmc: Add ioctl USBTMC_IOCTL_CLEANUP_IO
2018-09-12 8:50 UTC
[v6,05/22] usb: usbtmc: Add ioctl USBTMC_IOCTL_CANCEL_IO
2018-09-12 8:50 UTC
[v6,04/22] usb: usbtmc: Add ioctl for vendor specific read
2018-09-12 8:50 UTC
[v6,03/22] usb: usbtmc: Add ioctl USBTMC_IOCTL_WRITE_RESULT
2018-09-12 8:50 UTC
[v6,02/22] usb: usbtmc: Add ioctl for vendor specific write
2018-09-12 8:50 UTC
[v6,01/22] usb: usbtmc: Add ioctl for generic requests on control
2018-09-12 8:50 UTC
[3/3] mfd: omap-usb-host: Drop support for non-DT probe
2018-09-12 8:49 UTC
[3/3] mfd: omap-usb-host: Drop support for non-DT probe
2018-09-12 8:30 UTC
usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already started
2018-09-12 8:07 UTC
[2/3] ARM: OMAP2+: Remove legacy USB initialization code
2018-09-12 8:00 UTC
[3/3] mfd: omap-usb-host: Drop support for non-DT probe
2018-09-12 7:57 UTC
[v2,2/2] Embedded USB Debugger (EUD) driver
2018-09-12 6:29 UTC
[V3] usbcore: Select UAC3 configuration for audio if present
2018-09-12 3:16 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-11 22:48 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-11 20:57 UTC
[v2,2/2] Embedded USB Debugger (EUD) driver
2018-09-11 20:40 UTC
[V2] usbcore: Select UAC3 configuration for audio if present
2018-09-11 19:55 UTC
usb: dwc3: gadget: Check ENBLSLPM before sending ep command
2018-09-11 19:42 UTC
[V2] usbcore: Select UAC3 configuration for audio if present
2018-09-11 19:33 UTC
usbcore: Select UAC3 configuration for audio if present
2018-09-11 18:06 UTC
[usb-next] usb: core: remove unused variable 'flags'
2018-09-11 18:05 UTC
[v12,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-11 17:45 UTC
[v12,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-11 17:45 UTC
[v2] usb: core: added uevent for over-current
2018-09-11 17:43 UTC
[v11,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-09-11 16:53 UTC
[1/3] mfd: omap-usb-host: Use regular platform device probe mechanism
2018-09-11 16:12 UTC
[1/3] mfd: omap-usb-host: Use regular platform device probe mechanism
2018-09-11 15:53 UTC
[1/3] mfd: omap-usb-host: Use regular platform device probe mechanism
2018-09-11 15:48 UTC
[v3] usb: typec: get the vbus source and charge values from the devicetree
2018-09-11 15:33 UTC
[3/3] mfd: omap-usb-host: Drop support for non-DT probe
2018-09-11 15:06 UTC
[2/3] ARM: OMAP2+: Remove legacy USB initialization code
2018-09-11 15:06 UTC
[1/3] mfd: omap-usb-host: Use regular platform device probe mechanism
2018-09-11 15:06 UTC
[v3] usb: typec: get the vbus source and charge values from the devicetree
2018-09-11 14:59 UTC
[PATCHv2] usb: typec: Group all TCPCI/TCPM code together
2018-09-11 14:51 UTC
[1/3] dt-bindings: connector: Add support for USB-PD PPS APDOs to bindings
2018-09-11 14:44 UTC
[3/3] usb: typec: fusb302: Populate tcpc fwnode for TCPM property handling
2018-09-11 14:37 UTC
[2/3] dt-bindings: usb: fusb302: Use usb-connector bindings for configuration
2018-09-11 14:36 UTC
[1/3] dt-bindings: connector: Add support for USB-PD PPS APDOs to bindings
2018-09-11 14:34 UTC
option: Improve Quectel EP06 detection
2018-09-11 14:34 UTC
option: Improve Quectel EP06 detection
2018-09-11 14:00 UTC
[2/2] dt-bindings: usb: ohci: Add clocks description for R-Car Gen3
2018-09-11 13:34 UTC
[1/2] dt-bindings: usb: ehci: Add clocks description for R-Car Gen3
2018-09-11 13:34 UTC
[v10,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-09-11 13:07 UTC
smsc95xx: Add quirk for TJA1100 BroadRReach PHY
2018-09-11 10:12 UTC
smsc95xx: Add support for automated PHY address detection
2018-09-11 10:12 UTC
[v4,10/10] usb: typec: fusb302: reorganizing the probe function a little
2018-09-11 10:10 UTC
[v4,09/10] platform: x86: intel_cht_int33fe: Remove the old connections for the muxes
2018-09-11 10:10 UTC
[v4,08/10] usb: typec: class: Don't use port parent for getting mux handles
2018-09-11 10:10 UTC
[v4,07/10] platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
2018-09-11 10:10 UTC
[v4,06/10] platform: x86: intel_cht_int33fe: Add connection for the DP alt mode
2018-09-11 10:10 UTC
[v4,05/10] platform: x86: intel_cht_int33fe: Register all connections at once
2018-09-11 10:10 UTC
[v4,04/10] drivers: base: Helpers for adding device connection descriptions
2018-09-11 10:10 UTC
[v4,03/10] platform: x86: intel_cht_int33fe: Add dependency on muxes
2018-09-11 10:10 UTC
[v4,02/10] usb: roles: Handle driver reference counting
2018-09-11 10:10 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).