messages from 2018-10-30 12:33:42 to 2018-11-08 07:06:12 UTC [more...]
[2/2] usb: dwc3: gadget: Report isoc scheduled frame number
2018-11-08 7:06 UTC
[1/2] usb: gadget: Add start_frame to usb_request
2018-11-08 7:03 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-08 6:57 UTC
[3/4] usb: dwc3: gadget: remove unnecessary dev_info()
2018-11-08 6:57 UTC
[2/4] usb: dwc3: trace: log ep commands in hex
2018-11-08 6:57 UTC
[1/4] usb: dwc3: gadget: return errors from __dwc3_gadget_start_isoc()
2018-11-08 6:57 UTC
[v5,3/3] usb: dwc3: Add workaround for isoc start transfer failure
2018-11-08 3:51 UTC
[v5,2/3] usb: dwc3: Add disabling of start_transfer failure quirk
2018-11-08 3:51 UTC
[v5,1/3] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-11-08 3:51 UTC
[v2,2/2] usb: dwc3: gadget: Report isoc scheduled frame number
2018-11-08 2:47 UTC
[v2,1/2] usb: gadget: Add start_frame to usb_request
2018-11-08 2:47 UTC
[2/2] usb: dwc3: gadget: Report isoc scheduled frame number
2018-11-08 2:24 UTC
[1/2] usb: gadget: Add start_frame to usb_request
2018-11-08 2:24 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-08 2:10 UTC
[2/3] usb: dwc3: Add a property to disable USB2 LPM
2018-11-08 2:10 UTC
[1/3] usb: dwc3: Set GUSB2PHYCFG.ENBLSLPM
2018-11-08 2:10 UTC
[v2,5/5] usb: dwc3: debugfs: Print/set link state for peripheral mode
2018-11-08 1:56 UTC
usb: gadget: fix spelling mistakeis "[En]queing" -> "[En]queuing"
2018-11-08 1:55 UTC
[v2,4/5] usb: dwc3: debugfs: Properly print/set link state for HS
2018-11-08 1:55 UTC
[v2,3/5] usb: dwc3: debugfs: Dump internal LSP and ep registers
2018-11-08 1:55 UTC
[v2,2/5] usb: dwc3: debugfs: Print eps Tx/RxFIFO in bytes
2018-11-08 1:55 UTC
[v2,1/5] usb: dwc3: debugfs: Properly name Tx/RxFIFO
2018-11-08 1:55 UTC
usb: gadget: aspeed-vhub: constify usb_gadget_ops structure
2018-11-08 0:35 UTC
[stable,netdev,4.4+] lan78xx: make sure RX_ADDRL & RX_ADDRH regs are always up to date
2018-11-08 0:17 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-07 22:49 UTC
usb: dwc3: don't log probe deferrals; but do log other error codes
2018-11-07 20:40 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-07 18:11 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-07 17:40 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-07 17:29 UTC
[stable,netdev,4.4+] lan78xx: make sure RX_ADDRL & RX_ADDRH regs are always up to date
2018-11-07 16:50 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-07 16:27 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-07 16:23 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-07 15:58 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-07 15:23 UTC
[RFC,v1,03/14] usb:cdns3: Driver initialization code
2018-11-07 13:14 UTC
HID: Add quirk for Microsoft PIXART OEM mouse
2018-11-07 12:36 UTC
usb: dwc3: debugfs: Dump internal states
2018-11-07 10:54 UTC
usb: dwc3: debugfs: Dump internal states
2018-11-07 10:45 UTC
usb: dwc3: debugfs: Dump internal states
2018-11-07 9:22 UTC
USB-C device hotplug issue
2018-11-07 9:08 UTC
[RFC,v1,01/14] usb:cdns3: add pci to platform driver wrapper
2018-11-07 8:42 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-07 7:00 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-07 6:53 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-07 6:37 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-07 4:11 UTC
usb: dwc3: debugfs: Dump internal states
2018-11-07 4:01 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-06 23:44 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-06 21:40 UTC
[V3,6/6] usb: host: Add ability to build new Broadcom STB USB drivers
2018-11-06 19:33 UTC
[V3,6/6] usb: host: Add ability to build new Broadcom STB USB drivers
2018-11-06 18:22 UTC
USB: Disable USB2 LPM at shutdown
2018-11-06 17:34 UTC
usb: gadget: f_fs: Allow scatter-gather buffers
2018-11-06 16:26 UTC
usb: gadget: f_fs: Allow scatter-gather buffers
2018-11-06 16:18 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-06 16:08 UTC
[V3,6/6] usb: host: Add ability to build new Broadcom STB USB drivers
2018-11-06 15:55 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-06 15:01 UTC
[RFC,v1,14/14] usb:cdns3: Feature for changing role
2018-11-06 14:51 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-06 14:51 UTC
[RFC,v1,03/14] usb:cdns3: Driver initialization code
2018-11-06 14:44 UTC
[RFC,v1,04/14] usb:cdns3: Added DRD support
2018-11-06 14:32 UTC
[RFC,v1,03/14] usb:cdns3: Driver initialization code
2018-11-06 14:18 UTC
[RFC,v1,01/14] usb:cdns3: add pci to platform driver wrapper
2018-11-06 13:48 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-06 11:26 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-06 11:24 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-06 11:17 UTC
[V3,6/6] usb: host: Add ability to build new Broadcom STB USB drivers
2018-11-06 11:09 UTC
[2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-06 9:58 UTC
[v3,3/3] usb: typec: tcpm: charge current handling for sink during hard reset
2018-11-06 9:10 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-11-06 8:43 UTC
usb: dwc3: debugfs: Dump internal states
2018-11-06 7:35 UTC
[2/8] usb: dwc3: gadget: combine unaligned and zero flags
2018-11-06 7:30 UTC
[2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-06 6:29 UTC
[2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-06 5:07 UTC
[v3,3/3] usb: typec: tcpm: charge current handling for sink during hard reset
2018-11-06 0:15 UTC
[V3,6/6] usb: host: Add ability to build new Broadcom STB USB drivers
2018-11-05 21:31 UTC
[V3,5/6] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
2018-11-05 21:31 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-05 21:31 UTC
[V3,3/6] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
2018-11-05 21:31 UTC
[V3,2/6] usb: core: Add ability to skip phy exit on suspend and init on resume
2018-11-05 21:31 UTC
[V3,1/6] dt-bindings: Add Broadcom STB OHCI, EHCI and XHCI binding document
2018-11-05 21:31 UTC
[2/8] usb: dwc3: gadget: combine unaligned and zero flags
2018-11-05 19:34 UTC
usb: dwc3: debugfs: Dump internal states
2018-11-05 19:07 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-11-05 18:56 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-11-05 18:49 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-11-05 18:46 UTC
[3/3] fpga: Add fpga manager driver for ARRI Altera FPP
2018-11-05 16:19 UTC
[2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-05 16:19 UTC
[1/3] usb: misc: add driver for FT232H based FPGA configuration devices
2018-11-05 16:19 UTC
USB-C device hotplug issue
2018-11-05 15:35 UTC
usb: dwc3: dwc3 errors while video streaming with uvc-gadget
2018-11-05 13:38 UTC
USB: serial: io_ti: Replaced simple_strtoul with kstrtoul + Formatting issues
2018-11-05 13:11 UTC
usb: dwc3: debugfs: Dump internal states
2018-11-05 12:16 UTC
USB: serial: io_ti: Replaced simple_strtoul with kstrtoul + Formatting issues
2018-11-05 12:10 UTC
[v2,2/4] usb: chipidea: imx: add HSIC support
2018-11-05 9:40 UTC
[v2,1/4] usb: chipidea: add flag for imx hsic implementation
2018-11-05 9:31 UTC
[14/14] DT: marvell,mmp2: add USB OTG host controller
2018-11-05 9:20 UTC
[13/14] DT: marvell,mmp2: add OTG PHY
2018-11-05 9:20 UTC
[10/14] USB: gadget: mv-udc: use phy-pxa-usb
2018-11-05 9:20 UTC
[09/14] USB: phy-mv-usb: use phy-pxa-usb
2018-11-05 9:19 UTC
[06/14] ARM: aspenite: add an instance of pxa-usb-phy
2018-11-05 9:19 UTC
[05/14] ARM: ttc_dkb: add an instance of pxa-usb-phy
2018-11-05 9:19 UTC
[02/14] dt-bindings: phy-pxa-usb: add bindings
2018-11-05 9:19 UTC
[v2,2/4] usb: chipidea: imx: add HSIC support
2018-11-05 8:52 UTC
[v2,1/4] usb: chipidea: add flag for imx hsic implementation
2018-11-05 8:52 UTC
USB: serial: io_ti: Replaced simple_strtoul with kstrtoul + Formatting issues
2018-11-05 8:50 UTC
[5/5,v7] memstick: rtsx_usb_ms: Support runtime power management
2018-11-05 8:45 UTC
[4/5,v7] memstick: rtsx_usb_ms: Use ms_dev() helper
2018-11-05 8:45 UTC
[3/5,v7] memstick: Prevent memstick host from getting runtime suspended during card detection
2018-11-05 8:45 UTC
[2/5,v7] misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
2018-11-05 8:45 UTC
[1/5,v7] memstick: rtsx_usb_ms: Add missing pm_runtime_disable() in probe function
2018-11-05 8:45 UTC
usb: dwc2: gadget: fix ISOC frame overflow handling
2018-11-05 8:28 UTC
usb: dwc2: Fix ep disable spinlock flow
2018-11-05 7:57 UTC
[8/8] usb: dwc3: gadget: remove wait_end_transfer
2018-11-05 7:11 UTC
[7/8] usb: dwc3: gadget: move requests to cancelled_list
2018-11-05 7:11 UTC
[6/8] usb: dwc3: gadget: introduce cancelled_list
2018-11-05 7:11 UTC
[5/8] usb: dwc3: gadget: extract dwc3_gadget_ep_skip_trbs()
2018-11-05 7:11 UTC
[4/8] usb: dwc3: gadget: use num_trbs when skipping TRBs on ->dequeue()
2018-11-05 7:11 UTC
[3/8] usb: dwc3: gadget: track number of TRBs per request
2018-11-05 7:11 UTC
[2/8] usb: dwc3: gadget: combine unaligned and zero flags
2018-11-05 7:11 UTC
[1/8] usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers
2018-11-05 7:11 UTC
[RFC,v1,13/14] usb:cdns3: Adds debugging function
2018-11-05 6:17 UTC
[RFC,v1,13/14] usb:cdns3: Adds debugging function
2018-11-03 19:14 UTC
[RFC,v1,14/14] usb:cdns3: Feature for changing role
2018-11-03 17:51 UTC
[RFC,v1,13/14] usb:cdns3: Adds debugging function
2018-11-03 17:51 UTC
[RFC,v1,12/14] usb:cdns3: Adds transfer related function
2018-11-03 17:51 UTC
[RFC,v1,11/14] usb:cdns3: Adds enumeration related function
2018-11-03 17:51 UTC
[RFC,v1,10/14] usb:cdns3: Implements ISR functionality
2018-11-03 17:51 UTC
[RFC,v1,09/14] usb:cdns3: Ep0 operations part of the API
2018-11-03 17:51 UTC
[RFC,v1,08/14] usb:cdns3: EpX operations part of the API
2018-11-03 17:51 UTC
[RFC,v1,07/14] usb:cdns3: Implements device operations part of the API
2018-11-03 17:51 UTC
[RFC,v1,06/14] usb:cdns3: Initialization code for Device side
2018-11-03 17:51 UTC
[RFC,v1,05/14] usb:cdns3: Added Wrapper to XCHI driver
2018-11-03 17:51 UTC
[RFC,v1,04/14] usb:cdns3: Added DRD support
2018-11-03 17:51 UTC
[RFC,v1,03/14] usb:cdns3: Driver initialization code
2018-11-03 17:51 UTC
[RFC,v1,02/14] usb:cdns3: Device side header file
2018-11-03 17:51 UTC
[RFC,v1,01/14] usb:cdns3: add pci to platform driver wrapper
2018-11-03 17:51 UTC
[v2] usbnet: smsc95xx: disable carrier check while suspending
2018-11-03 6:50 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-11-03 6:25 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-11-03 1:47 UTC
usb: dwc3: Set default mode for DWC_usb3 v3.30a and higher
2018-11-03 1:41 UTC
usb: dwc3: debugfs: Dump internal states
2018-11-03 1:38 UTC
[3/3] usb: dwc3: Enable low power management using refclk
2018-11-03 1:35 UTC
[2/3] usb: dwc3: Set reference clock period
2018-11-03 1:35 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-03 1:35 UTC
[12/14] dt-bindings: ehci-mv: add bindings
2018-11-02 20:47 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-02 19:46 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-02 17:10 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-02 16:18 UTC
[v1,2/2] usb: dwc2: gadget: Accept LPM token when TxFIFO is not empty
2018-11-02 15:29 UTC
[v1,1/2] usb: dwc2: gadget: Fix WkupAlert interrupt handler
2018-11-02 15:29 UTC
usb: host: remove unnecessary condition check
2018-11-02 14:46 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-02 14:36 UTC
usb: host: remove unnecessary condition check
2018-11-02 14:14 UTC
[v3,1/3] dt-bindings: connector: Add self-powered property
2018-11-02 13:44 UTC
[v15,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-11-02 13:31 UTC
[v3,3/3] usb: typec: tcpm: charge current handling for sink during hard reset
2018-11-02 13:28 UTC
[v3,2/3] usb: typec: tcpm: Do not disconnect link for self powered devices
2018-11-02 13:28 UTC
[v3,1/3] dt-bindings: connector: Add self-powered property
2018-11-02 13:27 UTC
[v2] usb: xhci: fix small typo
2018-11-02 13:02 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-02 12:44 UTC
[v2,1/1] usb: xhci: do not create and register shared_hcd when USB3.0 is disabled
2018-11-02 6:57 UTC
[4/6] usb: gadget: add functions to signal udc driver to delay status stage
2018-11-01 23:40 UTC
usb: xhci: fix small typo
2018-11-01 17:41 UTC
usb: xhci: fix small typo
2018-11-01 15:56 UTC
HID: add driver for U2F Zero built-in LED and RNG
2018-11-01 15:16 UTC
[v2] usbnet: smsc95xx: disable carrier check while suspending
2018-11-01 13:58 UTC
[RESEND,v2] usb: dwc2: disable power_down on rockchip for regression
2018-11-01 5:42 UTC
[5/6] usb: musb: gadget: implement send_response
2018-10-31 23:26 UTC
[RESEND,v2] usb: dwc2: disable power_down on rockchip for regression
2018-10-31 23:02 UTC
[v2] usbnet: smsc95xx: disable carrier check while suspending
2018-10-31 21:52 UTC
usbnet: smsc95xx: disable carrier check while suspending
2018-10-31 21:27 UTC
Improve the accuracy of the baud rate generator by using round-to-closest instead of truncating when calculating baud rate divisors
2018-10-31 20:16 UTC
[2/2] usb: dwc2: gadget: Accept LPM token when TxFIFO is not empty
2018-10-31 11:41 UTC
[4/4,v6] memstick: rtsx_usb_ms: Support runtime power management
2018-10-31 10:40 UTC
[4/4,v6] memstick: rtsx_usb_ms: Support runtime power management
2018-10-31 6:59 UTC
[3/4,v6] memstick: rtsx_usb_ms: Use ms_dev() helper
2018-10-31 6:59 UTC
[2/4,v6] memstick: Prevent memstick host from getting runtime suspended during card detection
2018-10-31 6:59 UTC
[1/4,v6] misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
2018-10-31 6:59 UTC
[2/4,v5] memstick: Prevent memstick host from getting runtime suspended during card detection
2018-10-31 6:33 UTC
[v2] USB: Don't enable LPM if it's already enabled
2018-10-31 5:52 UTC
[RFC,2/3] USB: core: Add non-coherent buffer allocation helpers
2018-10-31 1:55 UTC
[RFC,1/1] usb: dwc3: drd: Register a USB role switch
2018-10-31 0:55 UTC
[1/2] usb: gadget: uvc: constify vb2_ops structure
2018-10-30 18:54 UTC
usb: gadget: aspeed-vhub: constify usb_gadget_ops structure
2018-10-30 16:19 UTC
[2/4,v5] memstick: Prevent memstick host from getting runtime suspended during card detection
2018-10-30 16:04 UTC
[1/2] usb: gadget: uvc: constify vb2_ops structure
2018-10-30 15:31 UTC
[2/4,v5] memstick: Prevent memstick host from getting runtime suspended during card detection
2018-10-30 15:23 UTC
USB: Don't enable LPM if it's already enabled
2018-10-30 15:07 UTC
[2/2] usb: dwc2: gadget: Accept LPM token when TxFIFO is not empty
2018-10-30 15:01 UTC
USB: Don't enable LPM if it's already enabled
2018-10-30 15:00 UTC
USB: Don't enable LPM if it's already enabled
2018-10-30 14:24 UTC
uwb: clean an indentation issue, remove extraneous tab
2018-10-30 14:15 UTC
[2/2] usb: dwc2: gadget: Accept LPM token when TxFIFO is not empty
2018-10-30 14:14 UTC
[1/2] usb: dwc2: gadget: Fix WkupAlert interrupt handler
2018-10-30 14:13 UTC
[RFC,1/1] usb: dwc3: drd: Register a USB role switch
2018-10-30 14:03 UTC
usb: dwc3: core: Clean up ULPI device
2018-10-30 13:39 UTC
usb: dwc3: core: Clean up ULPI device
2018-10-30 13:19 UTC
[2/4,v5] memstick: Prevent memstick host from getting runtime suspended during card detection
2018-10-30 13:03 UTC
[2/2] usb: dwc2: gadget: Accept LPM token when TxFIFO is not empty
2018-10-30 12:35 UTC
[1/2] usb: dwc2: gadget: Fix WkupAlert interrupt handler
2018-10-30 12:33 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).