messages from 2018-11-21 23:50:17 to 2018-12-02 16:36:20 UTC [more...]
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-02 16:36 UTC
[RFC,v2,11/15] usb:cdns3: Implements ISR functionality
2018-12-02 12:52 UTC
[RFC,v2,11/15] usb:cdns3: Implements ISR functionality
2018-12-02 11:49 UTC
[RFC,v2,10/15] usb:cdns3: Ep0 operations part of the API
2018-12-02 10:34 UTC
[v2] usb: chipidea: imx: Allow OC polarity active low
2018-12-02 5:57 UTC
[RFC,v2,09/15] usb:cdns3: EpX operations part of the API
2018-12-01 13:30 UTC
[v7,10/10] usb: dwc3: Check MISSED ISOC bit only for ISOC endpoints
2018-12-01 11:13 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-01 11:13 UTC
[v7,08/10] usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
2018-12-01 11:13 UTC
[v7,07/10] usb: dwc3: check for requests in started list for stream capable endpoints
2018-12-01 11:13 UTC
[v7,06/10] usb: dwc3: don't issue no-op trb for stream capable endpoints
2018-12-01 11:13 UTC
[v7,05/10] usb: dwc3: make controller clear transfer resources after complete
2018-12-01 11:13 UTC
[v7,04/10] usb: dwc3: update stream id in depcmd
2018-12-01 11:13 UTC
[v7,03/10] usb: dwc3: gadget: handle stream events
2018-12-01 11:13 UTC
[v7,02/10] usb: gadget: function: tcm: Add timeout for stream capable endpoints
2018-12-01 11:13 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-01 11:13 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-12-01 11:11 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 23:39 UTC
[v2] usb: chipidea: imx: Allow OC polarity active low
2018-11-30 23:29 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 21:34 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 21:16 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 20:53 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-30 16:15 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-11-30 15:09 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-30 14:36 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-11-30 7:32 UTC
[RFC,v2,02/15] usb:cdns3: Device side header file
2018-11-30 6:48 UTC
[2/2,v4] USB: serial: mos7840: Add a product ID for the new product
2018-11-30 6:31 UTC
[1/2,v4] USB: serial: mos7840: Adjust port settings for read and write registers
2018-11-30 6:31 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-30 6:29 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-30 4:20 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-11-30 3:29 UTC
[v3,3/4] usb: chipidea: host: override ehci->hub_control
2018-11-30 2:43 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-11-30 2:33 UTC
[V6,01/10] usb: gadget: udc: Add timer for stream capable endpoints
2018-11-29 15:51 UTC
[1/2] USB: serial: mos7840: Adjust port settings for read and write registers
2018-11-29 15:49 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-29 14:10 UTC
[stable,netdev,4.4+] lan78xx: make sure RX_ADDRL & RX_ADDRH regs are always up to date
2018-11-29 13:30 UTC
[V6,01/10] usb: gadget: udc: Add timer for stream capable endpoints
2018-11-29 12:51 UTC
[stable,netdev,4.4+] lan78xx: make sure RX_ADDRL & RX_ADDRH regs are always up to date
2018-11-29 12:31 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-29 10:36 UTC
[v4] usb/mtu3: power down device ip at setup
2018-11-29 7:50 UTC
[2/2] USB: serial: mos7840: Add a product ID for the new product
2018-11-29 6:51 UTC
[1/2] USB: serial: mos7840: Adjust port settings for read and write registers
2018-11-29 6:51 UTC
[v4] usb/mtu3: power down device ip at setup
2018-11-29 6:26 UTC
[AUTOSEL,4.14,14/35] Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
2018-11-29 6:00 UTC
[AUTOSEL,4.19,23/68] Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
2018-11-29 5:55 UTC
[AUTOSEL,4.19,22/68] usb: dwc2: pci: Fix an error code in probe
2018-11-29 5:55 UTC
[v4] usb/mtu3: power down device ip at setup
2018-11-29 3:16 UTC
[5/5] usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode
2018-11-29 2:34 UTC
[4/5] usb: mtu3: enable SETUPENDISR interrupt
2018-11-29 2:34 UTC
[3/5] usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
2018-11-29 2:34 UTC
[2/5] usb: mtu3: enable hardware remote wakeup from L1 automatically
2018-11-29 2:34 UTC
[1/5] usb: mtu3: remove QMU checksum
2018-11-29 2:34 UTC
usb: dwc3: debug: Print register name
2018-11-29 2:14 UTC
[V3] usb/mtu3: power down device ip at setup
2018-11-29 1:20 UTC
usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device
2018-11-28 16:40 UTC
USB: Fix invalid-free bug in port_over_current_notify()
2018-11-28 16:25 UTC
[V6,01/10] usb: gadget: udc: Add timer for stream capable endpoints
2018-11-28 16:15 UTC
[RFC,v2,12/15] usb:cdns3: Adds enumeration related function
2018-11-28 15:50 UTC
usb: hub: delay hub autosuspend if USB3 port is still link training
2018-11-28 15:01 UTC
[RFC,v2,11/15] usb:cdns3: Implements ISR functionality
2018-11-28 14:54 UTC
[RFC,v2,10/15] usb:cdns3: Ep0 operations part of the API
2018-11-28 14:31 UTC
usb: hub: delay hub autosuspend if USB3 port is still link training
2018-11-28 13:55 UTC
[RFC,v2,09/15] usb:cdns3: EpX operations part of the API
2018-11-28 12:46 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-11-28 12:22 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-28 11:40 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-28 11:34 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-28 11:16 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-28 11:15 UTC
[V3] usb/mtu3: power down device ip at setup
2018-11-28 9:53 UTC
[V2] usb/mtu3: power down device ip at setup
2018-11-28 9:41 UTC
[V2] usb/mtu3: power down device ip at setup
2018-11-28 9:29 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-28 9:14 UTC
usb: dwc3: debug: Print register name
2018-11-28 7:16 UTC
usb/mtu3: power down device ip at setup
2018-11-28 7:02 UTC
usb/mtu3: power down device ip at setup
2018-11-28 6:59 UTC
usb: dwc3: debug: Print register name
2018-11-28 6:57 UTC
usb/mtu3: power down device ip at setup
2018-11-28 6:22 UTC
usb/mtu3: power down device ip at setup
2018-11-28 6:04 UTC
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
2018-11-27 22:59 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-27 20:27 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-11-27 18:50 UTC
[v3,3/3] fpga: Add fpga manager driver for ARRI Altera FPP
2018-11-27 17:54 UTC
[v3,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-27 17:54 UTC
[v3,1/3] usb: misc: add driver for FT232H based FPGA configuration devices
2018-11-27 17:54 UTC
[RFC,2/2] dt-bindings: allow suggesting usb bus number for usb platform busses
2018-11-27 16:57 UTC
[RFC,1/2] usb core: dts: allow suggesting usb bus number for platform busses
2018-11-27 16:57 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-27 16:31 UTC
[PATCHv3] USB: serial: mos7840: Add a product ID for the new product
2018-11-27 15:26 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-27 15:19 UTC
[v3,2/4] usb: chipidea: imx: add HSIC support
2018-11-27 13:41 UTC
[v3,3/4] usb: chipidea: host: override ehci->hub_control
2018-11-27 13:41 UTC
[v3,1/4] usb: chipidea: add flag for imx hsic implementation
2018-11-27 13:40 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-27 12:10 UTC
[v3] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-27 11:48 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-27 11:29 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-11-27 11:09 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-27 10:39 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-11-27 9:31 UTC
[v3,3/4] usb: chipidea: host: override ehci->hub_control
2018-11-27 9:30 UTC
[v3,2/4] usb: chipidea: imx: add HSIC support
2018-11-27 9:30 UTC
[v3,1/4] usb: chipidea: add flag for imx hsic implementation
2018-11-27 9:30 UTC
[v2,RESEND] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
2018-11-27 8:59 UTC
[v3] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-27 7:44 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-27 0:21 UTC
[V4,1/5] dt-bindings: Add Broadcom STB USB support
2018-11-26 21:57 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-26 21:00 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-26 20:27 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-26 20:08 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-26 18:57 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-26 18:55 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-26 18:47 UTC
[v2,RESEND] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
2018-11-26 17:14 UTC
Documentation/usb: Fix typo
2018-11-26 14:49 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-26 14:21 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-26 13:47 UTC
[RFC,v2,06/15] usb:cdns3: Adds Host support
2018-11-26 10:17 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-26 10:15 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-26 10:09 UTC
[RFC,v2,06/15] usb:cdns3: Adds Host support
2018-11-26 9:50 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-26 9:39 UTC
[v4,net-next,21/21] net: usb: aqc111: Extend cdc_ether blacklist
2018-11-26 9:33 UTC
[v4,net-next,20/21] net: usb: aqc111: Add ASIX's HW ids
2018-11-26 9:33 UTC
[v4,net-next,19/21] net: usb: aqc111: Add support for wake on LAN by MAGIC packet
2018-11-26 9:33 UTC
[v4,net-next,18/21] net: usb: aqc111: Implement get/set_link_ksettings callbacks
2018-11-26 9:33 UTC
[v4,net-next,17/21] net: usb: aqc111: Initialize ethtool_ops structure
2018-11-26 9:33 UTC
[v4,net-next,16/21] net: usb: aqc111: Add RX VLAN filtering support
2018-11-26 9:33 UTC
[v4,net-next,15/21] net: usb: aqc111: Add support for VLAN_CTAG_TX/RX offload
2018-11-26 9:33 UTC
[v4,net-next,14/21] net: usb: aqc111: Implement set_rx_mode callback
2018-11-26 9:33 UTC
[v4,net-next,13/21] net: usb: aqc111: Add support for TSO
2018-11-26 9:33 UTC
[v4,net-next,12/21] net: usb: aqc111: Add support for enable/disable checksum offload
2018-11-26 9:33 UTC
[v4,net-next,11/21] net: usb: aqc111: Add support for changing MTU
2018-11-26 9:33 UTC
[v4,net-next,10/21] net: usb: aqc111: Add checksum offload support
2018-11-26 9:33 UTC
[v4,net-next,09/21] net: usb: aqc111: Implement RX data path
2018-11-26 9:33 UTC
[v4,net-next,08/21] net: usb: aqc111: Implement TX data path
2018-11-26 9:33 UTC
[v4,net-next,07/21] net: usb: aqc111: Add support for getting and setting of MAC address
2018-11-26 9:33 UTC
[v4,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-26 9:33 UTC
[v4,net-next,05/21] net: usb: aqc111: Introduce PHY access
2018-11-26 9:33 UTC
[v4,net-next,04/21] net: usb: aqc111: Various callbacks implementation
2018-11-26 9:33 UTC
[v4,net-next,03/21] net: usb: aqc111: Add implementation of read and write commands
2018-11-26 9:33 UTC
[v4,net-next,02/21] net: usb: aqc111: Add bind and empty unbind callbacks
2018-11-26 9:33 UTC
[v4,net-next,01/21] net: usb: aqc111: Driver skeleton for Aquantia AQtion USB to 5GbE
2018-11-26 9:32 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-26 8:39 UTC
[v2,RESEND] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
2018-11-26 8:27 UTC
[RFC,v2,06/15] usb:cdns3: Adds Host support
2018-11-26 8:24 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-26 8:07 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-26 7:23 UTC
usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
2018-11-25 16:57 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-11-25 12:35 UTC
[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller
2018-11-25 7:33 UTC
[v2,5/5] USB: omap_udc: fix rejection of out transfers when DMA is used
2018-11-24 22:17 UTC
[v2,4/5] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-11-24 22:17 UTC
[v2,3/5] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-11-24 22:17 UTC
[v2,2/5] USB: omap_udc: fix crashes on probe error and module removal
2018-11-24 22:17 UTC
[v2,1/5] USB: omap_udc: use devm_request_irq()
2018-11-24 22:17 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-24 14:28 UTC
USB: usb-storage: Add new IDs to ums-realtek
2018-11-23 20:38 UTC
[5/6] media: docs: brainless mass add SPDX headers to all media files
2018-11-23 18:38 UTC
[2/2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
2018-11-23 16:58 UTC
[v3] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-23 16:24 UTC
usb: misc: fix boolconv.cocci warnings
2018-11-23 15:29 UTC
usb: misc: fix boolconv.cocci warnings
2018-11-23 15:10 UTC
[v2] USB: Don't enable LPM if it's already enabled
2018-11-23 15:08 UTC
USB: Disable USB2 LPM at shutdown
2018-11-23 15:06 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-23 14:51 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-11-23 14:43 UTC
[v2] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-23 14:39 UTC
[RFC,v2,06/15] usb:cdns3: Adds Host support
2018-11-23 14:23 UTC
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
2018-11-23 13:07 UTC
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
2018-11-23 12:51 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-11-23 11:35 UTC
[3/3] ARM64: dts: marvell: armada-3720-espressobin: declare USB3 PHY
2018-11-23 11:22 UTC
[2/3] usb: host: xhci: mvebu: add reset on resume quirk
2018-11-23 11:22 UTC
[1/3] usb: core: comply to PHY framework
2018-11-23 11:22 UTC
[v2] phy: phy-pxa-usb: add a new driver
2018-11-23 11:13 UTC
[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller
2018-11-23 10:53 UTC
[RFC,v2,01/15] usb:cdns3: add pci to platform driver wrapper
2018-11-23 10:44 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-11-23 9:49 UTC
[v2] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-23 9:29 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-23 9:04 UTC
[v3,net-next,13/21] net: usb: aqc111: Add support for TSO
2018-11-23 8:58 UTC
[v2] USB: serial: ftdi_sio: Use rounding instead of truncating when calculating baud rate divisors
2018-11-23 8:53 UTC
USB: usb-storage: Add new IDs to ums-realtek
2018-11-23 8:42 UTC
[2/2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
2018-11-23 7:59 UTC
USB: Disable USB2 LPM at shutdown
2018-11-23 6:04 UTC
[v2] USB: Don't enable LPM if it's already enabled
2018-11-23 6:03 UTC
[v2] USB: serial: ftdi_sio: Use rounding instead of truncating when calculating baud rate divisors
2018-11-22 20:27 UTC
[v3,net-next,13/21] net: usb: aqc111: Add support for TSO
2018-11-22 19:17 UTC
[v3,net-next,10/21] net: usb: aqc111: Add checksum offload support
2018-11-22 19:14 UTC
[v3,net-next,09/21] net: usb: aqc111: Implement RX data path
2018-11-22 19:12 UTC
[v3,net-next,08/21] net: usb: aqc111: Implement TX data path
2018-11-22 19:07 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-22 17:15 UTC
[PATCHv3] USB: serial: mos7840: Add a product ID for the new product
2018-11-22 8:00 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-11-22 6:53 UTC
[v2] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-22 4:23 UTC
[v3,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2018-11-21 23:50 UTC
[v3,4/5] Bluetooth: btusb: Collect the common Intel assignments together
2018-11-21 23:50 UTC
[v3,3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
2018-11-21 23:50 UTC
[v3,2/5] usb: assign ACPI companions for embedded USB devices
2018-11-21 23:50 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).