messages from 2018-11-30 20:53:09 to 2018-12-06 01:54:07 UTC [more...]
USB: qcaux: Add Motorola modem UARTs
2018-12-06 1:54 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 19:42 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 19:24 UTC
[v7,05/10] usb: dwc3: make controller clear transfer resources after complete
2018-12-05 19:05 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-05 19:01 UTC
[v3,1/5] usb: split code locating ACPI companion into port and device
2018-12-05 17:41 UTC
[v3,2/5] usb: assign ACPI companions for embedded USB devices
2018-12-05 17:19 UTC
usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-05 16:33 UTC
USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-05 16:26 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-05 15:43 UTC
[3/3] usb: dwc3: keystone: Add support for ti,am654-dwc3
2018-12-05 15:19 UTC
[2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2018-12-05 15:19 UTC
[1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded
2018-12-05 15:19 UTC
[3/3] usb: dwc3: keystone: Add support for ti,am654-dwc3
2018-12-05 15:14 UTC
[2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2018-12-05 15:14 UTC
[1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded
2018-12-05 15:14 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-05 12:52 UTC
[2/2] xhci: Prevent U1/U2 link pm states if exit latency is too long
2018-12-05 12:22 UTC
[1/2] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-12-05 12:22 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-05 11:10 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-05 10:54 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 10:33 UTC
[v3,2/3] spi: add FTDI MPSSE SPI controller driver
2018-12-05 10:25 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 10:18 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 10:10 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 10:05 UTC
[AUTOSEL,3.18,14/26] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:54 UTC
[AUTOSEL,3.18,13/26] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:54 UTC
[AUTOSEL,3.18,12/26] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:54 UTC
[AUTOSEL,3.18,11/26] USB: omap_udc: use devm_request_irq()
2018-12-05 9:54 UTC
[AUTOSEL,4.4,17/33] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:51 UTC
[AUTOSEL,4.4,16/33] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:51 UTC
[AUTOSEL,4.4,15/33] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:51 UTC
[AUTOSEL,4.4,14/33] USB: omap_udc: use devm_request_irq()
2018-12-05 9:51 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 9:50 UTC
[v3,3/3] fpga: Add fpga manager driver for ARRI Altera FPP
2018-12-05 9:50 UTC
[AUTOSEL,4.9,25/45] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:46 UTC
[AUTOSEL,4.9,24/45] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:46 UTC
[AUTOSEL,4.9,23/45] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:46 UTC
[AUTOSEL,4.9,22/45] USB: omap_udc: use devm_request_irq()
2018-12-05 9:46 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-05 9:42 UTC
[AUTOSEL,4.14,45/69] usb: gadget: u_ether: fix unsafe list iteration
2018-12-05 9:42 UTC
[AUTOSEL,4.14,38/69] USB: omap_udc: fix rejection of out transfers when DMA is used
2018-12-05 9:42 UTC
[AUTOSEL,4.14,37/69] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:42 UTC
[AUTOSEL,4.14,36/69] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:42 UTC
[AUTOSEL,4.14,35/69] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:42 UTC
[AUTOSEL,4.14,34/69] USB: omap_udc: use devm_request_irq()
2018-12-05 9:42 UTC
[v2,1/3] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-12-05 9:41 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 9:36 UTC
[AUTOSEL,4.19,088/123] usb: gadget: u_ether: fix unsafe list iteration
2018-12-05 9:35 UTC
[AUTOSEL,4.19,083/123] usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
2018-12-05 9:35 UTC
[AUTOSEL,4.19,072/123] USB: omap_udc: fix rejection of out transfers when DMA is used
2018-12-05 9:35 UTC
[AUTOSEL,4.19,071/123] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:35 UTC
[AUTOSEL,4.19,070/123] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:35 UTC
[AUTOSEL,4.19,069/123] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:35 UTC
[AUTOSEL,4.19,068/123] USB: omap_udc: use devm_request_irq()
2018-12-05 9:35 UTC
[v3,2/5] usb: assign ACPI companions for embedded USB devices
2018-12-05 9:32 UTC
[v3,1/5] usb: split code locating ACPI companion into port and device
2018-12-05 9:32 UTC
[v2,1/3] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-12-05 9:25 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-05 9:18 UTC
[v3,2/2] usb: dwc3: gadget: Report isoc transfer frame number
2018-12-05 9:15 UTC
[v2] usb: dwc2: host: use hrtimer for NAK retries
2018-12-05 9:13 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-05 9:10 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-05 9:07 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 9:07 UTC
[v7,05/10] usb: dwc3: make controller clear transfer resources after complete
2018-12-05 9:01 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 8:57 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 8:55 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-05 8:44 UTC
[RFC,v2,06/15] usb:cdns3: Adds Host support
2018-12-05 8:41 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-12-05 8:32 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-05 8:00 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-05 7:57 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-05 7:45 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 7:19 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-05 6:17 UTC
[1/2,v4] USB: serial: mos7840: Adjust port settings for read and write registers
2018-12-05 6:03 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-05 1:57 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-05 0:56 UTC
[3/3] usb: appledisplay: Remove unnecessary spinlock
2018-12-04 22:43 UTC
[2/3] usb: appledisplay: Set urb transfer_flags to URB_NO_TRANSFER_DMA_MAP
2018-12-04 22:43 UTC
[1/3] usb: appledisplay: Add 27" Apple Cinema Display
2018-12-04 22:43 UTC
[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller
2018-12-04 22:41 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-04 20:01 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-04 19:28 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-04 19:07 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-04 17:47 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-04 16:46 UTC
scsi_set_medium_removal timeout issue
2018-12-04 16:36 UTC
USB: serial: console: fix reported terminal settings
2018-12-04 16:31 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-04 16:18 UTC
USB: serial: console: fix reported terminal settings
2018-12-04 16:15 UTC
USB: serial: console: fix reported terminal settings
2018-12-04 16:00 UTC
usb: core: Remove unnecessary memset()
2018-12-04 14:31 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-04 14:31 UTC
usb: dwc2: Disable power down feature on Samsung SoCs
2018-12-04 14:28 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 13:39 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-04 13:29 UTC
[v1,12/12] dts: hi3660: Add support for usb on Hikey960
2018-12-04 12:45 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-04 12:34 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 11:43 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-04 10:54 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-04 10:46 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-12-04 9:18 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-04 9:09 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 8:52 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-04 8:50 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 8:40 UTC
[v3,3/3] usb: chipidea: imx: allow to configure oc polarity on i.MX25
2018-12-04 8:31 UTC
[v3,2/3] usb: chipidea: imx: Warn if oc polarity isn't specified
2018-12-04 8:31 UTC
[v3,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-04 8:31 UTC
[v2,2/3] usb: chipidea: imx: Warn if oc polarity isn't specified
2018-12-04 8:20 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-04 7:11 UTC
[v2,2/3] usb: chipidea: imx: Warn if oc polarity isn't specified
2018-12-04 6:19 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-04 1:40 UTC
[v1,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2018-12-04 1:22 UTC
[v1,08/12] usb: roles: Add usb role switch notifier
2018-12-04 1:07 UTC
[01/10] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-04 1:03 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-03 23:08 UTC
usb: musb: dsps: fix otg state machine
2018-12-03 20:49 UTC
[v2,1/3] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-12-03 19:23 UTC
[v2,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-03 17:22 UTC
[v2,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-03 16:10 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-03 16:05 UTC
[01/10] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 16:01 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 15:54 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-03 14:51 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-03 12:43 UTC
[v1,08/12] usb: roles: Add usb role switch notifier
2018-12-03 12:38 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2018-12-03 12:25 UTC
[v4] USB: Don't enable LPM if it's already enabled
2018-12-03 10:26 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-03 10:23 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-12-03 10:19 UTC
[v1,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2018-12-03 9:53 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-03 9:30 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 9:28 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-03 9:28 UTC
[v1,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2018-12-03 9:25 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-03 9:23 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-03 9:15 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 9:12 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 9:02 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 8:59 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 8:51 UTC
[v3] USB: Don't enable LPM if it's already enabled
2018-12-03 8:36 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 8:35 UTC
[v3] USB: Don't enable LPM if it's already enabled
2018-12-03 8:32 UTC
[v1,04/12] usb: dwc3: dwc3-hisi: Add code for dwc3 of Hisilicon Soc Platform
2018-12-03 8:30 UTC
[v1,05/12] usb: dwc3: Add two quirks for Hisilicon Kirin Soc Platform
2018-12-03 8:23 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2018-12-03 8:17 UTC
[v1,06/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2018-12-03 8:14 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 8:12 UTC
[v1,04/12] usb: dwc3: dwc3-hisi: Add code for dwc3 of Hisilicon Soc Platform
2018-12-03 8:12 UTC
[v1,05/12] usb: dwc3: Add two quirks for Hisilicon Kirin Soc Platform
2018-12-03 8:02 UTC
[v1,12/12] dts: hi3660: Add support for usb on Hikey960
2018-12-03 3:45 UTC
[v1,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2018-12-03 3:45 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-03 3:45 UTC
[v1,09/12] usb: dwc3: Registering a role switch in the DRD code
2018-12-03 3:45 UTC
[v1,08/12] usb: roles: Add usb role switch notifier
2018-12-03 3:45 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2018-12-03 3:45 UTC
[v1,06/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2018-12-03 3:45 UTC
[v1,05/12] usb: dwc3: Add two quirks for Hisilicon Kirin Soc Platform
2018-12-03 3:45 UTC
[v1,04/12] usb: dwc3: dwc3-hisi: Add code for dwc3 of Hisilicon Soc Platform
2018-12-03 3:45 UTC
[v1,03/12] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
2018-12-03 3:45 UTC
[v1,02/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
2018-12-03 3:45 UTC
[v1,01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-12-03 3:45 UTC
[1/1] usb: chipidea: imx: improve the over current handling
2018-12-03 3:13 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-12-03 3:06 UTC
usb: chipidea: imx: Allow OC polarity active low
2018-12-03 1:42 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-03 1:34 UTC
[PATCHv2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
2018-12-02 23:51 UTC
[v2,3/3] usb: chipidea: imx: allow to configure oc polarity on i.MX25
2018-12-02 21:33 UTC
[v2,2/3] usb: chipidea: imx: Warn if oc polarity isn't specified
2018-12-02 21:33 UTC
[v2,1/3] usb: chipidea: imx: support configuring for active low oc signal
2018-12-02 21:33 UTC
[v2] usb: chipidea: imx: Allow OC polarity active low
2018-12-02 21:12 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-02 20:34 UTC
[RFC,v2,02/15] usb:cdns3: Device side header file
2018-12-02 19:27 UTC
[RFC,v2,12/15] usb:cdns3: Adds enumeration related function
2018-12-02 16:39 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-02 16:36 UTC
[RFC,v2,11/15] usb:cdns3: Implements ISR functionality
2018-12-02 12:52 UTC
[RFC,v2,11/15] usb:cdns3: Implements ISR functionality
2018-12-02 11:49 UTC
[RFC,v2,10/15] usb:cdns3: Ep0 operations part of the API
2018-12-02 10:34 UTC
[v2] usb: chipidea: imx: Allow OC polarity active low
2018-12-02 5:57 UTC
[RFC,v2,09/15] usb:cdns3: EpX operations part of the API
2018-12-01 13:30 UTC
[v7,10/10] usb: dwc3: Check MISSED ISOC bit only for ISOC endpoints
2018-12-01 11:13 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-01 11:13 UTC
[v7,08/10] usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
2018-12-01 11:13 UTC
[v7,07/10] usb: dwc3: check for requests in started list for stream capable endpoints
2018-12-01 11:13 UTC
[v7,06/10] usb: dwc3: don't issue no-op trb for stream capable endpoints
2018-12-01 11:13 UTC
[v7,05/10] usb: dwc3: make controller clear transfer resources after complete
2018-12-01 11:13 UTC
[v7,04/10] usb: dwc3: update stream id in depcmd
2018-12-01 11:13 UTC
[v7,03/10] usb: dwc3: gadget: handle stream events
2018-12-01 11:13 UTC
[v7,02/10] usb: gadget: function: tcm: Add timeout for stream capable endpoints
2018-12-01 11:13 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-01 11:13 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-12-01 11:11 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 23:39 UTC
[v2] usb: chipidea: imx: Allow OC polarity active low
2018-11-30 23:29 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 21:34 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 21:16 UTC
usb: chipidea: imx: unify over-current polarity handling
2018-11-30 20:53 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).