messages from 2018-12-05 06:03:59 to 2018-12-11 07:41:24 UTC [more...]
USB: serial: option: add Fibocom NL668 series
2018-12-11 7:41 UTC
[v5,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-11 2:09 UTC
[v5,3/4] usb: chipidea: host: override ehci->hub_control
2018-12-11 2:09 UTC
[v5,2/4] usb: chipidea: imx: add HSIC support
2018-12-11 2:08 UTC
[v5,1/4] usb: chipidea: add flag for imx hsic implementation
2018-12-11 2:08 UTC
[v4,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-11 1:14 UTC
[v2,2/2] PCI: Override Synopsys USB 3.x HAPS device class
2018-12-10 22:08 UTC
[v2,1/2] PCI: Move Synopsys HAPS platform device IDs
2018-12-10 22:07 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-10 21:51 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-10 21:49 UTC
usb: core: Remove unnecessary memset()
2018-12-10 20:06 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-10 18:54 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-10 18:49 UTC
[v2] usb: xhci: fix small typo
2018-12-10 16:34 UTC
usb: core: hcd: Remove unnecessarily repeated memset()
2018-12-10 15:23 UTC
usb: dwc2: Fix disable all EP's on disconnect
2018-12-10 14:09 UTC
[1/1] usb: dwc2: disable power_down on Amlogic devices
2018-12-10 13:20 UTC
[v2] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-10 12:50 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-10 12:39 UTC
[v1,1/2] dt-bindings: add binding for USBSS-DRD controller
2018-12-10 12:39 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-10 11:36 UTC
[v2] usb: dwc3: gadget: Disable CSP for stream OUT ep
2018-12-10 10:38 UTC
usb: dwc3: gadget: Disable CSP for stream OUT ep
2018-12-10 10:25 UTC
[v4,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-10 10:01 UTC
[-next] USB: serial: mos7840: remove set but not used variables 'number, serial'
2018-12-10 9:24 UTC
USB: serial: option: add HP lt4132
2018-12-10 9:06 UTC
[2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2018-12-10 9:05 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-10 9:03 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-10 9:01 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-10 8:56 UTC
USB: serial: option: add Fibocom NL668 series (fixed line break issue)
2018-12-10 8:34 UTC
usb: dwc3: gadget: Disable CSP for stream OUT ep
2018-12-10 8:34 UTC
[v4,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-10 8:09 UTC
[v2] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-10 8:04 UTC
usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2018-12-10 7:35 UTC
usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2018-12-10 7:23 UTC
usb: dwc3: gadget: Disable CSP for stream OUT ep
2018-12-10 7:21 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-10 7:18 UTC
USB: serial: option: add Fibocom NL668 series
2018-12-10 7:16 UTC
USB: serial: option: add Fibocom NL668 series (fixed line break issue)
2018-12-10 6:54 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-10 6:54 UTC
[1/1] usb: dwc2: disable power_down on Amlogic devices
2018-12-10 6:04 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-12-10 2:12 UTC
USB: serial: option: add Fibocom NL668 series (fixed line break issue)
2018-12-09 23:21 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory
2018-12-09 20:59 UTC
USB: serial: option: add Fibocom NL668 series
2018-12-09 20:41 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:40 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:17 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:06 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:04 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:02 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 19:54 UTC
[1/1] usb: dwc2: disable power_down on Amlogic devices
2018-12-09 19:01 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 16:46 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 16:32 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 15:28 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 15:07 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 14:53 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 14:44 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 11:16 UTC
[v4,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-09 5:40 UTC
[v4,3/4] usb: chipidea: host: override ehci->hub_control
2018-12-09 5:40 UTC
[v4,2/4] usb: chipidea: imx: add HSIC support
2018-12-09 5:40 UTC
[v4,1/4] usb: chipidea: add flag for imx hsic implementation
2018-12-09 5:40 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-08 19:03 UTC
USB: serial: option: add HP lt4132
2018-12-08 18:05 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-08 2:49 UTC
[v2,4/4] usb: dwc3: Enable frame number tracking based on reference clock
2018-12-08 2:28 UTC
[v2,3/4] usb: dwc3: Add property snps,enable-refclk-sof
2018-12-08 2:27 UTC
[v2,2/4] usb: dwc3: Set the reference clock period
2018-12-08 2:27 UTC
[v2,1/4] usb: dwc3: Add property snps,refclk-period-ns
2018-12-08 2:27 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-12-08 2:25 UTC
[v3,2/2] USB: quirks: Disable LPM for Logitech UVC devices
2018-12-08 1:47 UTC
[v3,1/2] USB: quirks: Check device interface LPM capability
2018-12-08 1:47 UTC
[v3,2/2] usb: dwc3: gadget: Report isoc transfer frame number
2018-12-08 1:21 UTC
[v2] USB: quirks: disable LPM for Logitech UVC devices
2018-12-08 0:46 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-07 23:32 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-07 17:09 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-07 15:44 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 14:40 UTC
[8/8] xhci: move usb2 get port status link resume handling to its own function
2018-12-07 14:19 UTC
[7/8] xhci: refactor U0 link state handling in get_port_status
2018-12-07 14:19 UTC
[6/8] xhci: cleanup code that sets portstatus and portchange bits
2018-12-07 14:19 UTC
[5/8] xhci: move usb2 speficic bits to own function in get_port_status call
2018-12-07 14:19 UTC
[4/8] xhci: move usb3 speficic bits to own function in get_port_status call
2018-12-07 14:19 UTC
[3/8] xhci: remove unused hcd_index()
2018-12-07 14:19 UTC
[2/8] xhci: move bus_state structure under the xhci_hub structure
2018-12-07 14:19 UTC
[1/8] xhci: remove the unused sw_lpm_support
2018-12-07 14:19 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 14:13 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 11:20 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 10:15 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 10:11 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 9:58 UTC
[2/2] phy: qualcomm: usb: Add Super-Speed PHY driver
2018-12-07 9:55 UTC
[1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings
2018-12-07 9:55 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 9:50 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 9:06 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 9:06 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-07 6:11 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-07 6:05 UTC
[v3,2/2] usb: dwc3: gadget: Report isoc transfer frame number
2018-12-07 6:01 UTC
[-next] usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler
2018-12-07 5:17 UTC
[-next] usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler
2018-12-07 3:52 UTC
[-next] USB: serial: mos7840: remove set but not used variables 'number, serial'
2018-12-07 2:50 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-06 23:09 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-06 18:42 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-06 17:56 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-06 15:57 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-06 15:48 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-06 15:07 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-06 15:03 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-12-06 14:56 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-06 14:52 UTC
usb: dwc2: Disable power down feature on Samsung SoCs
2018-12-06 14:20 UTC
[2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2018-12-06 10:32 UTC
[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller
2018-12-06 10:26 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-06 10:02 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-06 9:31 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-12-06 7:25 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-06 7:00 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-06 6:00 UTC
[v3,2/2] usb: dwc3: gadget: Report isoc transfer frame number
2018-12-06 3:48 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-06 3:02 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-06 1:54 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 19:42 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 19:24 UTC
[v7,05/10] usb: dwc3: make controller clear transfer resources after complete
2018-12-05 19:05 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-05 19:01 UTC
[v3,1/5] usb: split code locating ACPI companion into port and device
2018-12-05 17:41 UTC
[v3,2/5] usb: assign ACPI companions for embedded USB devices
2018-12-05 17:19 UTC
usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-05 16:33 UTC
USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-05 16:26 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-05 15:43 UTC
[3/3] usb: dwc3: keystone: Add support for ti,am654-dwc3
2018-12-05 15:19 UTC
[2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2018-12-05 15:19 UTC
[1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded
2018-12-05 15:19 UTC
[3/3] usb: dwc3: keystone: Add support for ti,am654-dwc3
2018-12-05 15:14 UTC
[2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2018-12-05 15:14 UTC
[1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded
2018-12-05 15:14 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-05 12:52 UTC
[2/2] xhci: Prevent U1/U2 link pm states if exit latency is too long
2018-12-05 12:22 UTC
[1/2] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-12-05 12:22 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-05 11:10 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-05 10:54 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 10:33 UTC
[v3,2/3] spi: add FTDI MPSSE SPI controller driver
2018-12-05 10:25 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 10:18 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 10:10 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 10:05 UTC
[AUTOSEL,3.18,14/26] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:54 UTC
[AUTOSEL,3.18,13/26] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:54 UTC
[AUTOSEL,3.18,12/26] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:54 UTC
[AUTOSEL,3.18,11/26] USB: omap_udc: use devm_request_irq()
2018-12-05 9:54 UTC
[AUTOSEL,4.4,17/33] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:51 UTC
[AUTOSEL,4.4,16/33] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:51 UTC
[AUTOSEL,4.4,15/33] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:51 UTC
[AUTOSEL,4.4,14/33] USB: omap_udc: use devm_request_irq()
2018-12-05 9:51 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 9:50 UTC
[v3,3/3] fpga: Add fpga manager driver for ARRI Altera FPP
2018-12-05 9:50 UTC
[AUTOSEL,4.9,25/45] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:46 UTC
[AUTOSEL,4.9,24/45] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:46 UTC
[AUTOSEL,4.9,23/45] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:46 UTC
[AUTOSEL,4.9,22/45] USB: omap_udc: use devm_request_irq()
2018-12-05 9:46 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-05 9:42 UTC
[AUTOSEL,4.14,45/69] usb: gadget: u_ether: fix unsafe list iteration
2018-12-05 9:42 UTC
[AUTOSEL,4.14,38/69] USB: omap_udc: fix rejection of out transfers when DMA is used
2018-12-05 9:42 UTC
[AUTOSEL,4.14,37/69] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:42 UTC
[AUTOSEL,4.14,36/69] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:42 UTC
[AUTOSEL,4.14,35/69] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:42 UTC
[AUTOSEL,4.14,34/69] USB: omap_udc: use devm_request_irq()
2018-12-05 9:42 UTC
[v2,1/3] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-12-05 9:41 UTC
USB: serial: console: fix reported terminal settings
2018-12-05 9:36 UTC
[AUTOSEL,4.19,088/123] usb: gadget: u_ether: fix unsafe list iteration
2018-12-05 9:35 UTC
[AUTOSEL,4.19,083/123] usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
2018-12-05 9:35 UTC
[AUTOSEL,4.19,072/123] USB: omap_udc: fix rejection of out transfers when DMA is used
2018-12-05 9:35 UTC
[AUTOSEL,4.19,071/123] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-12-05 9:35 UTC
[AUTOSEL,4.19,070/123] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-12-05 9:35 UTC
[AUTOSEL,4.19,069/123] USB: omap_udc: fix crashes on probe error and module removal
2018-12-05 9:35 UTC
[AUTOSEL,4.19,068/123] USB: omap_udc: use devm_request_irq()
2018-12-05 9:35 UTC
[v3,2/5] usb: assign ACPI companions for embedded USB devices
2018-12-05 9:32 UTC
[v3,1/5] usb: split code locating ACPI companion into port and device
2018-12-05 9:32 UTC
[v2,1/3] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-12-05 9:25 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-05 9:18 UTC
[v3,2/2] usb: dwc3: gadget: Report isoc transfer frame number
2018-12-05 9:15 UTC
[v2] usb: dwc2: host: use hrtimer for NAK retries
2018-12-05 9:13 UTC
[v1] usb: dwc3: trace: Refactor nested switch to make compiler happy
2018-12-05 9:10 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-05 9:07 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 9:07 UTC
[v7,05/10] usb: dwc3: make controller clear transfer resources after complete
2018-12-05 9:01 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 8:57 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 8:55 UTC
[v1,10/12] hikey960: Support usb functionality of Hikey960
2018-12-05 8:44 UTC
[RFC,v2,06/15] usb:cdns3: Adds Host support
2018-12-05 8:41 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-12-05 8:32 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-05 8:00 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-05 7:57 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-05 7:45 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-05 7:19 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-05 6:17 UTC
[1/2,v4] USB: serial: mos7840: Adjust port settings for read and write registers
2018-12-05 6:03 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).