messages from 2018-12-06 06:00:37 to 2018-12-13 12:46:35 UTC [more...]
USB: qcaux: Add Motorola modem UARTs
2018-12-13 12:46 UTC
[4.19,014/110] usb: xhci: Prevent bus suspend if a port connect change or polling state is detected
2018-12-13 12:24 UTC
USB: ehci-omap: Fix deferred probe for phy handling
2018-12-13 12:08 UTC
usb: CPU 100% hog upon device removal
2018-12-13 12:03 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-13 11:04 UTC
[v2] USB: serial: option: add Fibocom NL668 series
2018-12-13 10:26 UTC
cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader
2018-12-13 10:18 UTC
cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader
2018-12-13 10:13 UTC
cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader
2018-12-13 9:43 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-13 9:35 UTC
[v1,1/2] dt-bindings: add binding for USBSS-DRD controller
2018-12-13 9:25 UTC
cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader
2018-12-13 9:23 UTC
[v1,1/2] dt-bindings: add binding for USBSS-DRD controller
2018-12-13 9:20 UTC
USB: ehci-omap: Fix deferred probe for phy handling
2018-12-13 7:25 UTC
[-next] usb: renesas_usbhs: Fix unused function warning when CONFIG_PM not set
2018-12-13 3:41 UTC
cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader
2018-12-13 3:27 UTC
[-next] usb: renesas_usbhs: Fix unused function warning when CONFIG_PM not set
2018-12-13 3:19 UTC
USB: ehci-omap: Fix deferred probe for phy handling
2018-12-13 2:17 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-13 1:21 UTC
[v3] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-12 23:41 UTC
usb: CPU 100% hog upon device removal
2018-12-12 22:02 UTC
[v2] USB: serial: option: add Fibocom NL668 series
2018-12-12 20:47 UTC
[net,2/2] net: usb: aqc111: Support for thermal throttling feature
2018-12-12 20:28 UTC
[net,1/2] net: usb: aqc111: Add read_mdio operation
2018-12-12 19:38 UTC
[net,2/2] net: usb: aqc111: Support for thermal throttling feature
2018-12-12 19:34 UTC
usb: roles: Add a description for the class to Kconfig
2018-12-12 17:13 UTC
USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)
2018-12-12 16:13 UTC
[net,1/2] net: usb: aqc111: Add read_mdio operation
2018-12-12 16:11 UTC
USB: serial: option: add GosunCn ZTE WeLink ME3630
2018-12-12 16:08 UTC
[net,2/2] net: usb: aqc111: Support for thermal throttling feature
2018-12-12 16:08 UTC
USB: serial: option: add Fibocom NL668 series
2018-12-12 15:57 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-12 15:53 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-12 15:11 UTC
[net,2/2] net: usb: aqc111: Support for thermal throttling feature
2018-12-12 13:50 UTC
[net,1/2] net: usb: aqc111: Add read_mdio operation
2018-12-12 13:50 UTC
usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing
2018-12-12 12:49 UTC
usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing
2018-12-12 12:44 UTC
usb: dwc2: Reset device address on EnumDone
2018-12-12 11:43 UTC
[v3] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-12 11:42 UTC
[v2] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-12 11:40 UTC
[v3,2/2] USB: quirks: Disable LPM for Logitech UVC devices
2018-12-12 11:37 UTC
[v3,1/2] USB: quirks: Check device interface LPM capability
2018-12-12 11:37 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-12 11:07 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-12 11:04 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-12 10:15 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-12 9:24 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-12 8:34 UTC
USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)
2018-12-12 7:39 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-12 7:38 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-12 6:55 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-12 6:52 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-12 2:46 UTC
usb: renesas_usbhs: mark PM functions as __maybe_unused
2018-12-12 2:11 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-12 2:04 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-12 1:38 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-12-11 19:49 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-11 19:04 UTC
USB: serial: option: add GosunCn ZTE WeLink ME3630
2018-12-11 17:28 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-11 15:18 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-11 14:59 UTC
r8152: Add support for MAC address pass through on RTL8153-BND
2018-12-11 14:16 UTC
[6/6] dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[5/6] xhci: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[4/6] powerpc/iommu: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[3/6] ACPI/IORT: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[2/6] iommu/of: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-11 13:43 UTC
USB: serial: option: add Fibocom NL668 series
2018-12-11 13:22 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-11 12:15 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-11 12:14 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-11 11:46 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-12-11 11:26 UTC
[v1,1/2] dt-bindings: add binding for USBSS-DRD controller
2018-12-11 10:16 UTC
usb: renesas_usbhs: mark PM functions as __maybe_unused
2018-12-11 10:06 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-11 10:01 UTC
usb: gadget: uvc: configfs: add framebased format support
2018-12-11 10:00 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-11 9:39 UTC
[v2] usb: xhci: fix small typo
2018-12-11 9:26 UTC
USB: serial: option: add Fibocom NL668 series
2018-12-11 8:32 UTC
USB: serial: option: add Fibocom NL668 series
2018-12-11 7:41 UTC
[v5,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-11 2:09 UTC
[v5,3/4] usb: chipidea: host: override ehci->hub_control
2018-12-11 2:09 UTC
[v5,2/4] usb: chipidea: imx: add HSIC support
2018-12-11 2:08 UTC
[v5,1/4] usb: chipidea: add flag for imx hsic implementation
2018-12-11 2:08 UTC
[v4,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-11 1:14 UTC
[v2,2/2] PCI: Override Synopsys USB 3.x HAPS device class
2018-12-10 22:08 UTC
[v2,1/2] PCI: Move Synopsys HAPS platform device IDs
2018-12-10 22:07 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-10 21:51 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-10 21:49 UTC
usb: core: Remove unnecessary memset()
2018-12-10 20:06 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-10 18:54 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-10 18:49 UTC
[v2] usb: xhci: fix small typo
2018-12-10 16:34 UTC
usb: core: hcd: Remove unnecessarily repeated memset()
2018-12-10 15:23 UTC
usb: dwc2: Fix disable all EP's on disconnect
2018-12-10 14:09 UTC
[1/1] usb: dwc2: disable power_down on Amlogic devices
2018-12-10 13:20 UTC
[v2] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-10 12:50 UTC
[v1,2/2] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-10 12:39 UTC
[v1,1/2] dt-bindings: add binding for USBSS-DRD controller
2018-12-10 12:39 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-10 11:36 UTC
[v2] usb: dwc3: gadget: Disable CSP for stream OUT ep
2018-12-10 10:38 UTC
usb: dwc3: gadget: Disable CSP for stream OUT ep
2018-12-10 10:25 UTC
[v4,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-10 10:01 UTC
[-next] USB: serial: mos7840: remove set but not used variables 'number, serial'
2018-12-10 9:24 UTC
USB: serial: option: add HP lt4132
2018-12-10 9:06 UTC
[2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2018-12-10 9:05 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-10 9:03 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-10 9:01 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-10 8:56 UTC
USB: serial: option: add Fibocom NL668 series (fixed line break issue)
2018-12-10 8:34 UTC
usb: dwc3: gadget: Disable CSP for stream OUT ep
2018-12-10 8:34 UTC
[v4,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-10 8:09 UTC
[v2] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-10 8:04 UTC
usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2018-12-10 7:35 UTC
usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2018-12-10 7:23 UTC
usb: dwc3: gadget: Disable CSP for stream OUT ep
2018-12-10 7:21 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-10 7:18 UTC
USB: serial: option: add Fibocom NL668 series
2018-12-10 7:16 UTC
USB: serial: option: add Fibocom NL668 series (fixed line break issue)
2018-12-10 6:54 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-10 6:54 UTC
[1/1] usb: dwc2: disable power_down on Amlogic devices
2018-12-10 6:04 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-12-10 2:12 UTC
USB: serial: option: add Fibocom NL668 series (fixed line break issue)
2018-12-09 23:21 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory
2018-12-09 20:59 UTC
USB: serial: option: add Fibocom NL668 series
2018-12-09 20:41 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:40 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data,Re: [PATCH] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:17 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:06 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:04 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 20:02 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 19:54 UTC
[1/1] usb: dwc2: disable power_down on Amlogic devices
2018-12-09 19:01 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 16:46 UTC
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
2018-12-09 16:32 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 15:28 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 15:07 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 14:53 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 14:44 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-09 11:16 UTC
[v4,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-09 5:40 UTC
[v4,3/4] usb: chipidea: host: override ehci->hub_control
2018-12-09 5:40 UTC
[v4,2/4] usb: chipidea: imx: add HSIC support
2018-12-09 5:40 UTC
[v4,1/4] usb: chipidea: add flag for imx hsic implementation
2018-12-09 5:40 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-08 19:03 UTC
USB: serial: option: add HP lt4132
2018-12-08 18:05 UTC
[1/2] pci: pci_ids: Move Synopsys HAPS platform device IDs
2018-12-08 2:49 UTC
[v2,4/4] usb: dwc3: Enable frame number tracking based on reference clock
2018-12-08 2:28 UTC
[v2,3/4] usb: dwc3: Add property snps,enable-refclk-sof
2018-12-08 2:27 UTC
[v2,2/4] usb: dwc3: Set the reference clock period
2018-12-08 2:27 UTC
[v2,1/4] usb: dwc3: Add property snps,refclk-period-ns
2018-12-08 2:27 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-12-08 2:25 UTC
[v3,2/2] USB: quirks: Disable LPM for Logitech UVC devices
2018-12-08 1:47 UTC
[v3,1/2] USB: quirks: Check device interface LPM capability
2018-12-08 1:47 UTC
[v3,2/2] usb: dwc3: gadget: Report isoc transfer frame number
2018-12-08 1:21 UTC
[v2] USB: quirks: disable LPM for Logitech UVC devices
2018-12-08 0:46 UTC
[v3,4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
2018-12-07 23:32 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-07 17:09 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-07 15:44 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 14:40 UTC
[8/8] xhci: move usb2 get port status link resume handling to its own function
2018-12-07 14:19 UTC
[7/8] xhci: refactor U0 link state handling in get_port_status
2018-12-07 14:19 UTC
[6/8] xhci: cleanup code that sets portstatus and portchange bits
2018-12-07 14:19 UTC
[5/8] xhci: move usb2 speficic bits to own function in get_port_status call
2018-12-07 14:19 UTC
[4/8] xhci: move usb3 speficic bits to own function in get_port_status call
2018-12-07 14:19 UTC
[3/8] xhci: remove unused hcd_index()
2018-12-07 14:19 UTC
[2/8] xhci: move bus_state structure under the xhci_hub structure
2018-12-07 14:19 UTC
[1/8] xhci: remove the unused sw_lpm_support
2018-12-07 14:19 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 14:13 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 11:20 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 10:15 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 10:11 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 9:58 UTC
[2/2] phy: qualcomm: usb: Add Super-Speed PHY driver
2018-12-07 9:55 UTC
[1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings
2018-12-07 9:55 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 9:50 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 9:06 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-07 9:06 UTC
[v7,09/10] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
2018-12-07 6:11 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2018-12-07 6:05 UTC
[v3,2/2] usb: dwc3: gadget: Report isoc transfer frame number
2018-12-07 6:01 UTC
[-next] usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler
2018-12-07 5:17 UTC
[-next] usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler
2018-12-07 3:52 UTC
[-next] USB: serial: mos7840: remove set but not used variables 'number, serial'
2018-12-07 2:50 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-06 23:09 UTC
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
2018-12-06 18:42 UTC
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
2018-12-06 17:56 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-06 15:57 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-06 15:48 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-06 15:07 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-06 15:03 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-12-06 14:56 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-12-06 14:52 UTC
usb: dwc2: Disable power down feature on Samsung SoCs
2018-12-06 14:20 UTC
[2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2018-12-06 10:32 UTC
[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller
2018-12-06 10:26 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-06 10:02 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-06 9:31 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-12-06 7:25 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-12-06 7:00 UTC
USB: qcaux: Add Motorola modem UARTs
2018-12-06 6:00 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).