messages from 2018-12-31 05:35:10 to 2019-01-10 07:18:50 UTC [more...]
[v2,5/5] usb:cdns3 Add Cadence USB3 DRD Driver
2019-01-10 7:18 UTC
drivers/usb/storage: Remove duplicate headers
2019-01-10 7:10 UTC
[v2,5/5] usb:cdns3 Add Cadence USB3 DRD Driver
2019-01-10 6:57 UTC
drivers/usb/storage/cypress_atacb.c: Remove duplicate header
2019-01-10 6:49 UTC
[2/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-10 3:41 UTC
MUSB interrupt storm on device removal
2019-01-10 3:07 UTC
[v1,2/6] clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
2019-01-09 19:28 UTC
[v5,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-09 19:06 UTC
[v1,2/6] clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
2019-01-09 18:59 UTC
[v1,1/6] clk: qcom: Add missing freq for usb30_master_clk on 8998
2019-01-09 18:59 UTC
[v1,2/6] clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
2019-01-09 18:59 UTC
[2/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-09 15:14 UTC
[v2] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-09 15:02 UTC
[4/4] usb: musb: Add support for MediaTek musb controller
2019-01-09 14:01 UTC
MUSB interrupt storm on device removal
2019-01-09 13:19 UTC
[4/4] usb: musb: Add support for MediaTek musb controller
2019-01-09 12:31 UTC
[v3,4/4] usb: gadget: uvc: remove unused/duplicate function prototypes from uvc.h
2019-01-09 7:10 UTC
[v3,3/4] usb: gadget: uvc: disable stream when disconnected
2019-01-09 7:10 UTC
[v3,2/4] usb: gadget: uvc: don't delay the status phase of non-zero SET_INTERFACE requests
2019-01-09 7:10 UTC
[v3,1/4] usb: gadget: uvc: synchronize streamon/off with uvc_function_set_alt
2019-01-09 7:10 UTC
[v2] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-09 7:10 UTC
[v5,6/6] usb: gadget: uvc: allow ioctl to send response in status stage
2019-01-09 7:08 UTC
[v5,5/6] usb: musb: gadget: implement optional explicit status stage
2019-01-09 7:08 UTC
[v5,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-09 7:08 UTC
[v5,3/6] usb: gadget: uvc: package setup and data for control OUT requests
2019-01-09 7:08 UTC
[v5,2/6] usb: gadget: uvc: enqueue usb request in setup handler for control OUT
2019-01-09 7:08 UTC
[v5,1/6] usb: uvc: include videodev2.h in g_uvc.h
2019-01-09 7:08 UTC
[3/3] drivers: usb :fsl: Remove USB Errata checking code
2019-01-09 3:52 UTC
[2/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-09 3:37 UTC
[1/3] usb: kconfig: remove dependency FSL_SOC for ehci fsl driver
2019-01-09 3:23 UTC
[3/3] drivers: usb :fsl: Remove USB Errata checking code
2019-01-09 2:35 UTC
Add Proliic new chip: PL2303TB & PL2303N(G)
2019-01-09 1:12 UTC
[V3] usb:xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-08 20:43 UTC
USB: core: urb: Use struct_size() in kmalloc()
2019-01-08 17:36 UTC
[v4] USB: Don't enable LPM if it's already enabled
2019-01-08 17:34 UTC
usb: musb: dsps: fix otg state machine
2019-01-08 17:19 UTC
usb: musb: dsps: fix runtime pm for peripheral mode
2019-01-08 17:02 UTC
Add Proliic new chip: PL2303TB & PL2303N(G)
2019-01-08 17:01 UTC
[3/3] drivers: usb :fsl: Remove USB Errata checking code
2019-01-08 16:59 UTC
[V2] usb:xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-08 16:31 UTC
uwb: use struct_size() in kzalloc()
2019-01-08 16:27 UTC
[3/3] drivers: usb :fsl: Remove USB Errata checking code
2019-01-08 16:22 UTC
[2/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-08 16:20 UTC
usb: gadget: musb: fix short isoc packets with inventra dma for pandaboard es
2019-01-08 16:11 UTC
[1/3] usb: kconfig: remove dependency FSL_SOC for ehci fsl driver
2019-01-08 16:11 UTC
[v4] USB: Don't enable LPM if it's already enabled
2019-01-08 16:04 UTC
[v4] usb: hub: add retry routine after intr URB submit error
2019-01-08 16:00 UTC
[2/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-08 15:45 UTC
[v4] usb: hub: add retry routine after intr URB submit error
2019-01-08 15:45 UTC
[4/4] usb: musb: Add support for MediaTek musb controller
2019-01-08 15:44 UTC
[3/3] drivers: usb :fsl: Remove USB Errata checking code
2019-01-08 15:44 UTC
[v4] USB: Don't enable LPM if it's already enabled
2019-01-08 15:41 UTC
xhci: Use struct_size() in kzalloc()
2019-01-08 15:40 UTC
[v4,5/6] usb: musb: gadget: implement optional explicit status stage
2019-01-08 15:32 UTC
USB: core: urb: Use struct_size() in kmalloc()
2019-01-08 15:22 UTC
Add Proliic new chip: PL2303TB & PL2303N(G)
2019-01-08 14:16 UTC
[V2] roles: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-08 10:04 UTC
roles: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-08 6:25 UTC
[v4] USB: Don't enable LPM if it's already enabled
2019-01-08 6:18 UTC
[3/3] drivers: usb :fsl: Remove USB Errata checking code
2019-01-08 6:04 UTC
[2/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-08 6:04 UTC
[1/3] usb: kconfig: remove dependency FSL_SOC for ehci fsl driver
2019-01-08 6:04 UTC
[v4,5/6] usb: musb: gadget: implement optional explicit status stage
2019-01-08 5:49 UTC
usb: gadget: musb: fix short isoc packets with inventra dma for pandaboard es
2019-01-08 4:45 UTC
[1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-08 1:30 UTC
[v3] usb: hub: add retry routine after intr URB submit error
2019-01-07 21:25 UTC
[1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-07 20:40 UTC
[1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings
2019-01-07 20:33 UTC
[1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings
2019-01-07 20:26 UTC
USB: musb: fix indentation issue on a return statement
2019-01-07 20:21 UTC
[4/4] usb: musb: jz4740: Drop dependency on USB_OTG_BLACKLIST_HUB
2019-01-07 20:11 UTC
[3/4] usb: musb: jz4740: Drop dependency on MACH_JZ4740, use COMPILE_TEST
2019-01-07 20:10 UTC
[2/4] usb: musb: jz4740: Add support for devicetree
2019-01-07 19:47 UTC
usb: storage: Remove outdated URL from MAINTAINERS
2019-01-07 19:15 UTC
usb: gadget: musb: fix short isoc packets with inventra dma for pandaboard es
2019-01-07 19:11 UTC
[v3] usb: hub: add retry routine after intr URB submit error
2019-01-07 18:59 UTC
[v1,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-07 18:39 UTC
[v1,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-07 18:18 UTC
[V2] usb:xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-07 17:36 UTC
cdc_ether: trivial whitespace readability fix
2019-01-07 16:33 UTC
[v3] usb: hub: add retry routine after intr URB submit error
2019-01-07 16:33 UTC
USB: host: ehci: allow tine of highspeed nak-count
2019-01-07 16:19 UTC
[v4] USB: Don't enable LPM if it's already enabled
2019-01-07 16:16 UTC
[V2] roles: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-07 16:15 UTC
USB: serial: simple: add Motorola Tetra driver for TPG2200
2019-01-07 15:42 UTC
[RFC,lora-next,5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
2019-01-07 15:28 UTC
usb: core: Simplify return value of usb_get_configuration()
2019-01-07 15:10 UTC
[v4] USB: Don't enable LPM if it's already enabled
2019-01-07 15:05 UTC
[RFC,4/5] usb: cdc-acm: Enable serdev support
2019-01-07 15:02 UTC
[V2] roles: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-07 14:58 UTC
usb: core: Simplify return value of usb_get_configuration()
2019-01-07 14:21 UTC
[RFC,4/5] usb: cdc-acm: Enable serdev support
2019-01-07 13:48 UTC
[lora-next,3/5] net: lora: sx130x: Add PicoCell serdev driver
2019-01-07 12:11 UTC
[02/19] usbnet: smsc95xx: Stop propagation of in_pm
2019-01-07 11:50 UTC
[V2] roles: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-07 11:36 UTC
[07/19] usbnet: smsc95xx: Split the reset function
2019-01-07 11:05 UTC
[02/19] usbnet: smsc95xx: Stop propagation of in_pm
2019-01-07 11:02 UTC
[V2] roles: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-07 10:49 UTC
roles: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-07 9:28 UTC
USB: serial: simple: add Motorola Tetra driver for TPG2200
2019-01-07 7:31 UTC
[1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-07 7:31 UTC
[v4] USB: Don't enable LPM if it's already enabled
2019-01-07 6:40 UTC
[V2] usb: chipidea: add a check for the availability of next child
2019-01-07 2:06 UTC
[v4,5/6] usb: musb: gadget: implement optional explicit status stage
2019-01-06 20:03 UTC
[v4,6/6] usb: gadget: uvc: allow ioctl to send response in status stage
2019-01-06 16:02 UTC
[v4,5/6] usb: musb: gadget: implement optional explicit status stage
2019-01-06 16:02 UTC
[v4,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-06 16:02 UTC
[v4,3/6] usb: gadget: uvc: package setup and data for control OUT requests
2019-01-06 16:02 UTC
[v4,2/6] usb: gadget: uvc: enqueue usb request in setup handler for control OUT
2019-01-06 16:02 UTC
[v4,1/6] usb: uvc: include videodev2.h in g_uvc.h
2019-01-06 16:02 UTC
[V3] usbcore: Select only first configuration for non-UAC3 compliant devices
2019-01-06 2:44 UTC
[V2] usbcore: Select only first configuration for non-UAC3 compliant devices
2019-01-05 22:02 UTC
[V2] usbcore: Select only first configuration for non-UAC3 compliant devices
2019-01-05 17:39 UTC
[V2] usb: chipidea: add a check for the availability of next child
2019-01-05 15:58 UTC
usbcore: Select only first configuration for non-UAC3 compliant devices
2019-01-05 14:35 UTC
usbcore: Select only first configuration for non-UAC3 compliant devices
2019-01-05 14:02 UTC
cdc_ether: trivial whitespace readability fix
2019-01-05 13:32 UTC
[lora-next,3/5] net: lora: sx130x: Add PicoCell serdev driver
2019-01-05 9:18 UTC
[lora-next,3/5] net: lora: sx130x: Add PicoCell serdev driver
2019-01-05 1:49 UTC
[lora-next,3/5] net: lora: sx130x: Add PicoCell serdev driver
2019-01-05 1:32 UTC
[RFC,lora-next,5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
2019-01-04 23:43 UTC
usb/gadget: fix typo
2019-01-04 21:44 UTC
[10/19] usbnet: smsc95xx: Replace smsc95xx_mdio_read() with phy_read()
2019-01-04 18:02 UTC
USB: musb: fix indentation issue on a return statement
2019-01-04 17:59 UTC
usb: host: u132-hcd: fix a couple of indentation issues
2019-01-04 17:43 UTC
[RFC,lora-next,5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
2019-01-04 17:07 UTC
[v1,6/6] arm64: dts: qcom: msm8998: Add USB-related nodes
2019-01-04 16:51 UTC
[v1,5/6] usb: dwc3: qcom: Add support for MSM8998
2019-01-04 16:51 UTC
[v1,4/6] phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998
2019-01-04 16:50 UTC
[v1,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-04 16:50 UTC
[v1,2/6] clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
2019-01-04 16:50 UTC
[v1,1/6] clk: qcom: Add missing freq for usb30_master_clk on 8998
2019-01-04 16:49 UTC
Support Mac address pass through on Dell DS1000 dock
2019-01-04 16:15 UTC
[1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-04 16:10 UTC
[10/19] usbnet: smsc95xx: Replace smsc95xx_mdio_read() with phy_read()
2019-01-04 15:57 UTC
[10/19] usbnet: smsc95xx: Replace smsc95xx_mdio_read() with phy_read()
2019-01-04 14:58 UTC
[v7,01/10] usb: gadget: udc: Add timer support for usb requests
2019-01-04 14:17 UTC
[10/19] usbnet: smsc95xx: Replace smsc95xx_mdio_read() with phy_read()
2019-01-04 13:24 UTC
[RFC,lora-next,5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
2019-01-04 11:21 UTC
[RFC,4/5] usb: cdc-acm: Enable serdev support
2019-01-04 11:21 UTC
[lora-next,3/5] net: lora: sx130x: Add PicoCell serdev driver
2019-01-04 11:21 UTC
[lora-next,2/5] net: lora: sx130x: Prepare storing driver-specific data
2019-01-04 11:21 UTC
[lora-next,1/5] net: lora: sx130x: Factor out SPI specific parts
2019-01-04 11:21 UTC
[1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-04 3:00 UTC
[12/19] usbnet: smsc95xx: Replace ad-hoc PHY functions with generic ones
2019-01-04 2:19 UTC
[10/19] usbnet: smsc95xx: Replace smsc95xx_mdio_read() with phy_read()
2019-01-04 2:19 UTC
[09/19] usbnet: smsc95xx: Connect to phydev
2019-01-04 2:18 UTC
[2/2] phy: qualcomm: usb: Add Super-Speed PHY driver
2019-01-03 23:30 UTC
[1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-03 22:14 UTC
[v2] Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
2019-01-03 21:56 UTC
[1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
2019-01-03 13:58 UTC
[10/19] usbnet: smsc95xx: Replace smsc95xx_mdio_read() with phy_read()
2019-01-03 13:39 UTC
[12/19] usbnet: smsc95xx: Replace ad-hoc PHY functions with generic ones
2019-01-03 13:28 UTC
[09/19] usbnet: smsc95xx: Connect to phydev
2019-01-03 13:22 UTC
[8/8] arm64: defconfig: Enable tegra XUDC driver
2019-01-03 10:04 UTC
[7/8] usb: gadget: Add UDC driver for tegra XUSB device mode controller
2019-01-03 10:04 UTC
[6/8] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
2019-01-03 10:04 UTC
[5/8] arm64: tegra: Enable xudc on Jetson TX1
2019-01-03 10:04 UTC
[4/8] arm64: tegra: Add xudc node for Tegra210
2019-01-03 10:04 UTC
[3/8] dt-bindings: phy: tegra-xusb-padctl: Add nvidia,usb3-port-fake entry
2019-01-03 10:04 UTC
[2/8] arm64: tegra: Add nvidia,usb3-port-fake entry to Jetson TX1 padctl
2019-01-03 10:04 UTC
[1/8] phy: tegra: xusb: t210: add XUSB device mode support
2019-01-03 10:04 UTC
Add Prolific new chip: PL2303TB & PL2303N(G)
2019-01-03 8:46 UTC
xhci-pci: don't enable runtime PM for Alpine Ridge on Maximus VIII Impact
2019-01-03 8:17 UTC
xhci-pci: don't enable runtime PM for Alpine Ridge on Maximus VIII Impact
2019-01-03 4:00 UTC
[v2,2/2] USB: storage: add quirk for SMI SM3350
2019-01-03 3:26 UTC
[v2,1/2] USB: storage: don't insert sane sense for SPC3+ when bad sense specified
2019-01-03 3:26 UTC
[19/19] usbnet: smsc95xx: Use phy bit operations
2019-01-03 1:10 UTC
[18/19] usbnet: smsc95xx: Remove all of the carrier checking code
2019-01-03 1:10 UTC
[17/19] usbnet: smsc95xx: Replace generic_mii_ioctl()
2019-01-03 1:10 UTC
[16/19] usbnet: smsc95xx: Replace mii_check_media()
2019-01-03 1:10 UTC
[15/19] usbnet: smsc95xx: Replace mii_ethtool_gset()
2019-01-03 1:10 UTC
[14/19] usbnet: smsc95xx: Replace mii_nway_restart()
2019-01-03 1:10 UTC
[13/19] usbnet: smsc95xx: Replace smsc95xx_link_ok_nopm()
2019-01-03 1:10 UTC
[12/19] usbnet: smsc95xx: Replace ad-hoc PHY functions with generic ones
2019-01-03 1:10 UTC
[11/19] usbnet: smsc95xx: Replace smsc95xx_mdio_write() with phy_write()
2019-01-03 1:10 UTC
[10/19] usbnet: smsc95xx: Replace smsc95xx_mdio_read() with phy_read()
2019-01-03 1:10 UTC
[09/19] usbnet: smsc95xx: Connect to phydev
2019-01-03 1:10 UTC
[08/19] usbnet: smsc95xx: Register MII bus
2019-01-03 1:10 UTC
[07/19] usbnet: smsc95xx: Split the reset function
2019-01-03 1:10 UTC
[06/19] usbnet: smsc95xx: Remove __smsc95xx_mdio_{read,write}()
2019-01-03 1:10 UTC
[05/19] usbnet: smsc95xx: Remove smsc95xx_{read,write}_nopm()
2019-01-03 1:10 UTC
[04/19] usbnet: smsc95xx: Remove __smsc95xx_{read,write}_reg()
2019-01-03 1:10 UTC
[03/19] usbnet: smsc95xx: Remove smsc95xx_{read,write}_reg_nopm()
2019-01-03 1:10 UTC
[02/19] usbnet: smsc95xx: Stop propagation of in_pm
2019-01-03 1:10 UTC
[01/19] usbnet: smsc95xx: Fix memory leak in smsc95xx_bind
2019-01-03 1:10 UTC
Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
2019-01-02 20:57 UTC
Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
2019-01-02 18:37 UTC
xhci-pci: don't enable runtime PM for Alpine Ridge on Maximus VIII Impact
2019-01-02 11:23 UTC
[1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
2019-01-02 5:44 UTC
Add Prolific new chip: PL2303TB & PL2303N(G)
2019-01-02 2:52 UTC
Add Prolific new chip: PL2303TB & PL2303N(G)
2019-01-02 1:45 UTC
[v2] usb: devio: update max count of DPs per interval for ISOC
2019-01-02 1:33 UTC
Add Prolific new chip: PL2303TB & PL2303N(G)
2019-01-02 1:04 UTC
[RFC,v1] leds: fix regression in usbport led trigger
2019-01-01 14:54 UTC
[RFC,v1] leds: fix regression in usbport led trigger
2019-01-01 14:00 UTC
[v2,5/5] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-31 12:31 UTC
[1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
2018-12-31 11:05 UTC
[v2,5/5] usb:cdns3 Add Cadence USB3 DRD Driver
2018-12-31 9:42 UTC
[v1,1/2] dt-bindings: add binding for USBSS-DRD controller
2018-12-31 5:35 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).