messages from 2019-01-15 12:04:22 to 2019-01-18 22:34:07 UTC [more...]
[v4,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2019-01-18 22:34 UTC
[v4,4/5] Bluetooth: btusb: Collect the common Intel assignments together
2019-01-18 22:34 UTC
[v4,3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
2019-01-18 22:34 UTC
[v4,2/5] usb: assign ACPI companions for embedded USB devices
2019-01-18 22:34 UTC
[v4,1/5] usb: split code locating ACPI companion into port and device
2019-01-18 22:34 UTC
usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path
2019-01-18 21:29 UTC
usbip: Fix vep_free_request() null pointer checks on input args
2019-01-18 21:29 UTC
usb: dwc3: exynos: Fix error handling of clk_prepare_enable
2019-01-18 21:17 UTC
[v3,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2019-01-18 20:51 UTC
MUSB interrupt storm on device removal
2019-01-18 20:15 UTC
[v5,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-18 16:52 UTC
[v2,05/10] phy: add A3700 UTMI PHY driver
2019-01-18 16:36 UTC
[v5,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-18 16:31 UTC
[v2,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-18 16:25 UTC
[v2,02/10] usb: host: xhci: mvebu: add reset on resume quirk
2019-01-18 16:04 UTC
[5/7] usb: typec: ucsi: add fw update needed check
2019-01-18 15:37 UTC
[6/7] usb: typec: ucsi: add check for supported vendor
2019-01-18 15:29 UTC
[2/7] usb: typec: ucsi: add ccg command framework
2019-01-18 15:19 UTC
[v2,1/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-18 15:04 UTC
[1/7] usb: typec: ucsi: add get_fw_info function
2019-01-18 14:53 UTC
[net-next] net: usb: rtl8150: remove set but not used variable 'rx_stat'
2019-01-18 14:30 UTC
[v3,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-18 13:34 UTC
USB: serial: keyspan_usa: add proper SPDX lines for .h files
2019-01-18 13:23 UTC
USB: serial: keyspan_usa: add proper SPDX lines for .h files
2019-01-18 12:12 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-18 11:28 UTC
USB: serial: keyspan_usa: add proper SPDX lines for .h files
2019-01-18 11:09 UTC
[v3,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2019-01-18 11:04 UTC
USB: serial: keyspan_usa: add proper SPDX lines for .h files
2019-01-18 10:11 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:44 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:28 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:22 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:13 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:07 UTC
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
2019-01-18 9:05 UTC
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
2019-01-18 8:56 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 8:56 UTC
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
2019-01-18 8:52 UTC
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
2019-01-18 8:51 UTC
[19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-18 8:43 UTC
[21/21] memblock: drop memblock_alloc_*_nopanic() variants
2019-01-18 8:42 UTC
[2/7] usb: typec: ucsi: add ccg command framework
2019-01-18 7:09 UTC
[5/7] usb: typec: ucsi: add fw update needed check
2019-01-18 7:07 UTC
[5/7] usb: typec: ucsi: add fw update needed check
2019-01-18 7:06 UTC
[1/7] usb: typec: ucsi: add get_fw_info function
2019-01-18 7:06 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-18 6:57 UTC
[v3,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-18 6:14 UTC
[v2,1/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-18 2:39 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-18 2:18 UTC
[net-next] net: usb: rtl8150: remove set but not used variable 'rx_stat'
2019-01-18 2:06 UTC
[1/1] usb: chipidea: fix static checker warning for NULL pointer
2019-01-18 1:35 UTC
[7/7] usb: typec: ucsi: add firmware flashing support
2019-01-18 1:13 UTC
[6/7] usb: typec: ucsi: add check for supported vendor
2019-01-18 1:13 UTC
[5/7] usb: typec: ucsi: add fw update needed check
2019-01-18 1:12 UTC
[4/7] usb: typec: ucsi: add cmd used for fw flashing
2019-01-18 1:09 UTC
[3/7] usb: typec: ucsi: add port num info
2019-01-18 1:09 UTC
[2/7] usb: typec: ucsi: add ccg command framework
2019-01-18 1:09 UTC
[1/7] usb: typec: ucsi: add get_fw_info function
2019-01-18 1:09 UTC
[v3,4/4] usb: musb: Kconfig: Drop dependency on CONFIG_USB for jz4740
2019-01-17 22:33 UTC
[v3,3/4] usb: musb: Kconfig: Drop dependency on MACH_JZ4740 for jz4740
2019-01-17 22:33 UTC
[v3,2/4] usb: musb: jz4740: Add support for devicetree
2019-01-17 22:33 UTC
[v3,1/4] Documentation: dt: Add binding info for jz4740-musb driver
2019-01-17 22:33 UTC
[v2,3/4] usb: musb: Kconfig: Drop dependency on MACH_JZ4740 for jz4740
2019-01-17 22:31 UTC
[v2,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-17 17:57 UTC
USB:Serial:pl2303:Add new Pull-UP Mode to support PL2303HXD(TYPE_HX)
2019-01-17 16:48 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-17 16:38 UTC
usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers
2019-01-17 16:29 UTC
USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)
2019-01-17 16:28 UTC
[v2,1/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-17 16:08 UTC
[v3,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-17 14:33 UTC
USB: usbip: delete README file
2019-01-17 14:32 UTC
[v3,1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-17 12:41 UTC
[V3] usb:xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-17 11:55 UTC
[v3,1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-17 11:06 UTC
[1/1] usb: chipidea: fix static checker warning for NULL pointer
2019-01-17 10:58 UTC
[v2,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-17 10:52 UTC
usb: renesas_usbhs: replace udelay() with usleep_range()
2019-01-17 10:43 UTC
[21/21] memblock: drop memblock_alloc_*_nopanic() variants
2019-01-17 9:28 UTC
[1/1] usb: chipidea: fix static checker warning for NULL pointer
2019-01-17 9:24 UTC
[v2,3/3] drivers: usb :fsl: Remove USB Errata checking code
2019-01-17 9:10 UTC
[v2,2/3] usb: kconfig: remove dependency FSL_SOC for ehci fsl driver
2019-01-17 9:10 UTC
[v2,1/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-17 9:10 UTC
USB: add missing SPDX lines to Kconfig and Makefiles
2019-01-17 8:23 UTC
USB: remove README file
2019-01-17 8:23 UTC
USB: usbip: delete README file
2019-01-17 8:23 UTC
USB: host: whci: rename Kbuild file
2019-01-17 8:23 UTC
USB: serial: keyspan_usa: add proper SPDX lines for .h files
2019-01-17 8:23 UTC
[2/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-17 8:06 UTC
usb: renesas_usbhs: replace udelay() with usleep_range()
2019-01-17 7:24 UTC
[v3,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-17 7:15 UTC
[v3,3/4] usb: musb: Delete the const attribute of addr parameter in readb/w/l hooks
2019-01-17 7:15 UTC
[v3,2/4] arm: dts: mt2701: Add usb2 device nodes
2019-01-17 7:15 UTC
[v3,1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-17 7:15 UTC
[19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-17 7:06 UTC
[v3,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-17 7:01 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-17 6:44 UTC
USB:Serial:pl2303:Add new Pull-UP Mode to support PL2303HXD(TYPE_HX)
2019-01-17 6:19 UTC
USB: Fix configuration selection issues introduced in v4.20.0
2019-01-17 3:53 UTC
[v2,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-17 3:34 UTC
USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)
2019-01-17 2:18 UTC
usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers
2019-01-16 23:56 UTC
[v2,2/6] dt-bindings: usb: Add support for msm8998
2019-01-16 21:32 UTC
[v2,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-16 21:05 UTC
[v3,1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
2019-01-16 20:56 UTC
[v3,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-16 19:51 UTC
USB: Fix configuration selection issues introduced in v4.20.0
2019-01-16 19:13 UTC
usb: phy: am335x: fix race condition in _probe
2019-01-16 17:54 UTC
[15/21] sparc: add checks for the return value of memblock_alloc*()
2019-01-16 17:21 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-16 17:07 UTC
[v2] usb: warm-reset ports on hub resume, if requested
2019-01-16 16:43 UTC
[v2,2/2] usb: chipidea: imx: set power polarity
2019-01-16 16:32 UTC
[v2] usb: warm-reset ports on hub resume, if requested
2019-01-16 16:06 UTC
usb: warm-reset ports on hub resume, if requested
2019-01-16 15:58 UTC
[v3] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-16 15:33 UTC
[v2,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-16 15:28 UTC
[v5,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-16 15:06 UTC
[19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-16 14:32 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-16 14:22 UTC
[v3,2/2] usb: usb251xb: add usb data lane port swap feature
2019-01-16 14:20 UTC
[v3,1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
2019-01-16 14:20 UTC
[v2,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-16 13:59 UTC
[v2,2/2] usb: usb251xb: add usb data lane port swap feature
2019-01-16 13:56 UTC
[v2,1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
2019-01-16 13:45 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-16 13:44 UTC
[21/21] memblock: drop memblock_alloc_*_nopanic() variants
2019-01-16 13:44 UTC
[20/21] memblock: memblock_alloc_try_nid: don't panic
2019-01-16 13:44 UTC
[19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-16 13:44 UTC
[18/21] swiotlb: add checks for the return value of memblock_alloc*()
2019-01-16 13:44 UTC
[17/21] init/main: add checks for the return value of memblock_alloc*()
2019-01-16 13:44 UTC
[16/21] mm/percpu: add checks for the return value of memblock_alloc*()
2019-01-16 13:44 UTC
[15/21] sparc: add checks for the return value of memblock_alloc*()
2019-01-16 13:44 UTC
[14/21] ia64: add checks for the return value of memblock_alloc*()
2019-01-16 13:44 UTC
[13/21] arch: don't memset(0) memory returned by memblock_alloc()
2019-01-16 13:44 UTC
[12/21] arch: use memblock_alloc() instead of memblock_alloc_from(size, align, 0)
2019-01-16 13:44 UTC
[11/21] memblock: make memblock_find_in_range_node() and choose_memblock_flags() static
2019-01-16 13:44 UTC
[10/21] memblock: refactor internal allocation functions
2019-01-16 13:44 UTC
[09/21] memblock: drop memblock_alloc_base()
2019-01-16 13:44 UTC
[08/21] memblock: drop __memblock_alloc_base()
2019-01-16 13:44 UTC
[07/21] memblock: memblock_phys_alloc(): don't panic
2019-01-16 13:44 UTC
[06/21] memblock: memblock_phys_alloc_try_nid(): don't panic
2019-01-16 13:44 UTC
[05/21] memblock: emphasize that memblock_alloc_range() returns a physical address
2019-01-16 13:44 UTC
[04/21] memblock: drop memblock_alloc_base_nid()
2019-01-16 13:44 UTC
[03/21] memblock: replace memblock_alloc_base(ANYWHERE) with memblock_phys_alloc
2019-01-16 13:44 UTC
[02/21] powerpc: use memblock functions returning virtual address
2019-01-16 13:44 UTC
[01/21] openrisc: prefer memblock APIs returning virtual address
2019-01-16 13:44 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-16 13:30 UTC
[v2,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-16 13:20 UTC
[2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot
2019-01-16 13:11 UTC
USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)
2019-01-16 11:22 UTC
USB:Serial:pl2303:Add new Pull-UP Mode to support PL2303HXD(TYPE_HX)
2019-01-16 11:18 UTC
[v3,2/2] usb: chipidea: imx: set power polarity
2019-01-16 11:11 UTC
[v3,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-16 11:11 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-16 10:53 UTC
[v2,2/2] usb: chipidea: imx: set power polarity
2019-01-16 10:51 UTC
[v2,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-16 10:51 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-16 10:10 UTC
[8/8] net: macb: add sam9x60-macb compatibility string
2019-01-16 9:57 UTC
[7/8] USB: host: ohci-at91: add sam9x60-sfr definition for ohci
2019-01-16 9:57 UTC
[6/8] power: reset: at91-reset: add support for sam9x60 SoC
2019-01-16 9:57 UTC
[5/8] net/macb: bindings doc: add sam9x60 binding
2019-01-16 9:57 UTC
[4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
2019-01-16 9:57 UTC
[3/8] dt-bindings: arm: atmel: add new sam9x60 SFR binding
2019-01-16 9:57 UTC
[2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-16 9:57 UTC
[1/8] dt-bindings: arm: atmel: add missing samx7 to reset controller
2019-01-16 9:57 UTC
[v2,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-16 9:39 UTC
[v2,05/10] phy: add A3700 UTMI PHY driver
2019-01-16 9:20 UTC
[v2,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-16 8:58 UTC
[v2,1/6] dt-bindings: phy-qcom: Add support for msm8998 usb
2019-01-16 8:57 UTC
[v2,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-16 8:50 UTC
[2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot
2019-01-16 8:21 UTC
[1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-01-16 7:05 UTC
[2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot
2019-01-16 6:48 UTC
[1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-01-16 6:48 UTC
[v5,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-16 5:00 UTC
usb: dwc3: gadget: Fail request submission if it was already queued
2019-01-16 4:34 UTC
USB: Fix configuration selection issues introduced in v4.20.0
2019-01-16 4:24 UTC
[v2,3/4] usb: musb: Extract set toggle as a separate interface
2019-01-16 2:44 UTC
[v2,3/4] usb: musb: Extract set toggle as a separate interface
2019-01-16 2:43 UTC
[v2,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-16 2:43 UTC
[v3] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-16 0:01 UTC
[v2,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-15 21:44 UTC
[v2,2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2019-01-15 21:35 UTC
[v2,3/4] usb: musb: Extract set toggle as a separate interface
2019-01-15 20:40 UTC
[v2,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-15 20:38 UTC
[v2,6/6] arm64: dts: qcom: msm8998: Add USB-related nodes
2019-01-15 18:44 UTC
[v2,5/6] usb: dwc3: qcom: Add support for MSM8998
2019-01-15 18:38 UTC
[v2,4/6] phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998
2019-01-15 18:28 UTC
USB: Fix configuration selection issues introduced in v4.20.0
2019-01-15 18:12 UTC
[v2,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-15 18:11 UTC
[v2,2/6] dt-bindings: usb: Add support for msm8998
2019-01-15 18:09 UTC
[v2,1/6] dt-bindings: phy-qcom: Add support for msm8998 usb
2019-01-15 18:08 UTC
USB: Fix configuration selection issues introduced in v4.20.0
2019-01-15 16:40 UTC
[v2] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-15 16:35 UTC
[v2,3/4] usb: musb: Kconfig: Drop dependency on MACH_JZ4740 for jz4740
2019-01-15 16:26 UTC
USB: Fix configuration selection issues introduced in v4.20.0
2019-01-15 16:13 UTC
[v2,3/4] usb: musb: Extract set toggle as a separate interface
2019-01-15 15:19 UTC
USB:Serial:pl2303:Add new Pull-UP Mode to support PL2303HXD(TYPE_HX)
2019-01-15 15:15 UTC
USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)
2019-01-15 15:13 UTC
[2/2] usb: chipidea: imx: set power polarity
2019-01-15 12:31 UTC
[1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-15 12:31 UTC
[v2,2/2] usb: usb251xb: add usb data lane port swap feature
2019-01-15 12:04 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).