messages from 2019-01-17 10:58:43 to 2019-01-22 09:00:45 UTC [more...]
[2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-22 9:00 UTC
usb: typec: tpcm: improve error handling of tcpm_register_port
2019-01-22 9:00 UTC
[v2] usb: dwc3: exynos: Fix error handling of clk_prepare_enable
2019-01-22 8:20 UTC
[v2,1/6] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-22 8:08 UTC
[v2,3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-22 8:04 UTC
[v3] usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2019-01-22 7:56 UTC
[v3,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-22 7:50 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-22 7:27 UTC
[RFC,3/5] usb: roles: Find the muxes by also matching against the device node
2019-01-22 5:40 UTC
[v2] usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2019-01-22 4:28 UTC
[1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-01-22 2:38 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-22 2:18 UTC
[v4,6/6] usb: musb: Add support for MediaTek musb controller
2019-01-22 1:45 UTC
[v4,5/6] usb: musb: Add musb_clearb/w() interface
2019-01-22 1:43 UTC
[4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
2019-01-22 1:10 UTC
[2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-22 1:07 UTC
[1/8] dt-bindings: arm: atmel: add missing samx7 to reset controller
2019-01-22 1:05 UTC
[1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-01-22 1:03 UTC
[v3,3/3] arm64: dts: qcom: msm8998: Add USB-related nodes
2019-01-21 21:33 UTC
[v3,2/3] usb: dwc3: qcom: Add support for MSM8998
2019-01-21 21:33 UTC
[v3,1/3] dt-bindings: usb: Add support for msm8998
2019-01-21 21:32 UTC
[v2] usb: dwc3: exynos: Fix error handling of clk_prepare_enable
2019-01-21 21:23 UTC
MUSB interrupt storm on device removal
2019-01-21 21:20 UTC
[v3,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-21 18:00 UTC
[v2,2/2] usb: chipidea: imx: set power polarity
2019-01-21 17:57 UTC
[v2,19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-21 17:18 UTC
MUSB interrupt storm on device removal
2019-01-21 16:31 UTC
[v2] usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2019-01-21 16:17 UTC
[v4,6/6] usb: musb: Add support for MediaTek musb controller
2019-01-21 16:07 UTC
[v4,5/6] usb: musb: Add musb_clearb/w() interface
2019-01-21 15:59 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-21 15:47 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-21 15:44 UTC
[v3,1/4] Documentation: dt: Add binding info for jz4740-musb driver
2019-01-21 15:18 UTC
[v4,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-21 15:14 UTC
usb: core: endpoint: Add error messages for usb_create_ep_devs()
2019-01-21 14:35 UTC
usb: misc: usb3503: Add system sleep support in non-I2C mode
2019-01-21 14:33 UTC
usb: core: endpoint: Add error messages for usb_create_ep_devs()
2019-01-21 14:30 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-01-21 14:02 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2019-01-21 13:51 UTC
[v3] usb: dwc2: gadget: Add scatter-gather mode
2019-01-21 13:44 UTC
[v4,6/6] usb: musb: Add support for MediaTek musb controller
2019-01-21 12:22 UTC
[v4,5/6] usb: musb: Add musb_clearb/w() interface
2019-01-21 12:22 UTC
[v4,4/6] usb: musb: Add noirq type of dma create interface
2019-01-21 12:22 UTC
[v4,3/6] usb: musb: Add get/set toggle hooks
2019-01-21 12:22 UTC
[v4,2/6] arm: dts: mt2701: Add usb2 device nodes
2019-01-21 12:22 UTC
[v4,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-21 12:22 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-21 12:15 UTC
[v3,10/10] ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs
2019-01-21 11:23 UTC
[v3,09/10] ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
2019-01-21 11:23 UTC
[v3,08/10] ARM64: dts: marvell: armada-37xx: fix USB2 memory region
2019-01-21 11:23 UTC
[v3,07/10] MAINTAINERS: phy: fill Armada 3700 PHY drivers entry
2019-01-21 11:23 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-21 11:23 UTC
[v3,05/10] phy: add A3700 UTMI PHY driver
2019-01-21 11:23 UTC
[v3,04/10] usb: ehci-orion: add S2RAM support
2019-01-21 11:23 UTC
[v3,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-21 11:23 UTC
[v3,02/10] usb: host: xhci: mvebu: add reset on resume quirk
2019-01-21 11:23 UTC
[v3,01/10] usb: core: comply to PHY framework
2019-01-21 11:23 UTC
USB: storage: karma: add whitespace after declarations
2019-01-21 11:04 UTC
[v2,02/10] usb: host: xhci: mvebu: add reset on resume quirk
2019-01-21 10:54 UTC
[v2,05/10] phy: add A3700 UTMI PHY driver
2019-01-21 10:37 UTC
[v2,6/6] usb :fsl: Change string format for errata property
2019-01-21 10:25 UTC
[v2,5/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_14
2019-01-21 10:25 UTC
[v2,4/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
2019-01-21 10:25 UTC
[v2,3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-21 10:25 UTC
[v2,2/6] usb: phy: Workaround for USB erratum-A005728
2019-01-21 10:25 UTC
[v2,1/6] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-21 10:25 UTC
[v2,05/10] phy: add A3700 UTMI PHY driver
2019-01-21 10:24 UTC
[v1,3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-21 10:08 UTC
usb: dwc3: gadget: issue a stop command for ISOC endpoint
2019-01-21 10:02 UTC
[v2,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-21 10:00 UTC
usb: dwc3: exynos: Fix error handling of clk_prepare_enable
2019-01-21 9:56 UTC
[v2,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-21 9:55 UTC
[v2] usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2019-01-21 9:33 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-21 9:31 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-21 9:29 UTC
usb: dwc3: gadget: don't remove the request if bus-expired
2019-01-21 9:03 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-21 8:40 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2019-01-21 8:36 UTC
[v1,3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-21 8:16 UTC
[v2,21/21] memblock: drop memblock_alloc_*_nopanic() variants
2019-01-21 8:04 UTC
[v2,20/21] memblock: memblock_alloc_try_nid: don't panic
2019-01-21 8:04 UTC
[v2,19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,18/21] swiotlb: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,17/21] init/main: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,16/21] mm/percpu: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,15/21] sparc: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,14/21] ia64: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,13/21] arch: don't memset(0) memory returned by memblock_alloc()
2019-01-21 8:04 UTC
[v2,12/21] arch: use memblock_alloc() instead of memblock_alloc_from(size, align, 0)
2019-01-21 8:03 UTC
[v2,11/21] memblock: make memblock_find_in_range_node() and choose_memblock_flags() static
2019-01-21 8:03 UTC
[v2,10/21] memblock: refactor internal allocation functions
2019-01-21 8:03 UTC
[v2,09/21] memblock: drop memblock_alloc_base()
2019-01-21 8:03 UTC
[v2,08/21] memblock: drop __memblock_alloc_base()
2019-01-21 8:03 UTC
[v2,07/21] memblock: memblock_phys_alloc(): don't panic
2019-01-21 8:03 UTC
[v2,06/21] memblock: memblock_phys_alloc_try_nid(): don't panic
2019-01-21 8:03 UTC
[v2,05/21] memblock: emphasize that memblock_alloc_range() returns a physical address
2019-01-21 8:03 UTC
[v2,04/21] memblock: drop memblock_alloc_base_nid()
2019-01-21 8:03 UTC
[v2,03/21] memblock: replace memblock_alloc_base(ANYWHERE) with memblock_phys_alloc
2019-01-21 8:03 UTC
[v2,02/21] powerpc: use memblock functions returning virtual address
2019-01-21 8:03 UTC
[v2,01/21] openrisc: prefer memblock APIs returning virtual address
2019-01-21 8:03 UTC
usb: dwc2: Reset device address on EnumDone
2019-01-21 7:13 UTC
[v1,6/6] usb :fsl: Change string format for errata property
2019-01-21 3:13 UTC
[v1,5/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_14
2019-01-21 3:13 UTC
[v1,4/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
2019-01-21 3:13 UTC
[v1,3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-21 3:13 UTC
[v1,2/6] usb: phy: Workaround for USB erratum-A005728
2019-01-21 3:13 UTC
[v1,1/6] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-21 3:12 UTC
usb: dwc3: gadget: don't remove the request if bus-expired
2019-01-21 1:49 UTC
[v6,6/6] usb: gadget: uvc: allow ioctl to send response in status stage
2019-01-20 19:41 UTC
[v6,5/6] usb: musb: gadget: implement optional explicit status stage
2019-01-20 19:41 UTC
[v6,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-20 19:41 UTC
[v6,3/6] usb: gadget: uvc: package setup and data for control OUT requests
2019-01-20 19:41 UTC
[v6,2/6] usb: gadget: uvc: enqueue usb request in setup handler for control OUT
2019-01-20 19:41 UTC
[v6,1/6] usb: uvc: include videodev2.h in g_uvc.h
2019-01-20 19:41 UTC
usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path
2019-01-20 19:29 UTC
[v5,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-20 17:59 UTC
[v4,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2019-01-19 19:51 UTC
[v4,4/5] Bluetooth: btusb: Collect the common Intel assignments together
2019-01-19 19:51 UTC
[v4,3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
2019-01-19 19:51 UTC
[v4,2/5] usb: assign ACPI companions for embedded USB devices
2019-01-19 19:51 UTC
[v4,1/5] usb: split code locating ACPI companion into port and device
2019-01-19 19:51 UTC
[net-next] net: usb: rtl8150: remove set but not used variable 'rx_stat'
2019-01-19 18:30 UTC
usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path
2019-01-19 16:58 UTC
usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path
2019-01-19 8:21 UTC
usbip: Fix vep_free_request() null pointer checks on input args
2019-01-19 8:17 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-19 2:51 UTC
[v4,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2019-01-18 22:34 UTC
[v4,4/5] Bluetooth: btusb: Collect the common Intel assignments together
2019-01-18 22:34 UTC
[v4,3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
2019-01-18 22:34 UTC
[v4,2/5] usb: assign ACPI companions for embedded USB devices
2019-01-18 22:34 UTC
[v4,1/5] usb: split code locating ACPI companion into port and device
2019-01-18 22:34 UTC
usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path
2019-01-18 21:29 UTC
usbip: Fix vep_free_request() null pointer checks on input args
2019-01-18 21:29 UTC
usb: dwc3: exynos: Fix error handling of clk_prepare_enable
2019-01-18 21:17 UTC
[v3,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2019-01-18 20:51 UTC
MUSB interrupt storm on device removal
2019-01-18 20:15 UTC
[v5,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-18 16:52 UTC
[v2,05/10] phy: add A3700 UTMI PHY driver
2019-01-18 16:36 UTC
[v5,4/6] usb: gadget: add mechanism to specify an explicit status stage
2019-01-18 16:31 UTC
[v2,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-18 16:25 UTC
[v2,02/10] usb: host: xhci: mvebu: add reset on resume quirk
2019-01-18 16:04 UTC
[5/7] usb: typec: ucsi: add fw update needed check
2019-01-18 15:37 UTC
[6/7] usb: typec: ucsi: add check for supported vendor
2019-01-18 15:29 UTC
[2/7] usb: typec: ucsi: add ccg command framework
2019-01-18 15:19 UTC
[v2,1/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-18 15:04 UTC
[1/7] usb: typec: ucsi: add get_fw_info function
2019-01-18 14:53 UTC
[net-next] net: usb: rtl8150: remove set but not used variable 'rx_stat'
2019-01-18 14:30 UTC
[v3,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-18 13:34 UTC
USB: serial: keyspan_usa: add proper SPDX lines for .h files
2019-01-18 13:23 UTC
USB: serial: keyspan_usa: add proper SPDX lines for .h files
2019-01-18 12:12 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-18 11:28 UTC
USB: serial: keyspan_usa: add proper SPDX lines for .h files
2019-01-18 11:09 UTC
[v3,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2019-01-18 11:04 UTC
USB: serial: keyspan_usa: add proper SPDX lines for .h files
2019-01-18 10:11 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:44 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:28 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:22 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:13 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 9:07 UTC
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
2019-01-18 9:05 UTC
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
2019-01-18 8:56 UTC
[v2] leds: fix regression in usbport led trigger
2019-01-18 8:56 UTC
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
2019-01-18 8:52 UTC
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
2019-01-18 8:51 UTC
[19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-18 8:43 UTC
[21/21] memblock: drop memblock_alloc_*_nopanic() variants
2019-01-18 8:42 UTC
[2/7] usb: typec: ucsi: add ccg command framework
2019-01-18 7:09 UTC
[5/7] usb: typec: ucsi: add fw update needed check
2019-01-18 7:07 UTC
[5/7] usb: typec: ucsi: add fw update needed check
2019-01-18 7:06 UTC
[1/7] usb: typec: ucsi: add get_fw_info function
2019-01-18 7:06 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-18 6:57 UTC
[v3,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-18 6:14 UTC
[v2,1/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-18 2:39 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-18 2:18 UTC
[net-next] net: usb: rtl8150: remove set but not used variable 'rx_stat'
2019-01-18 2:06 UTC
[1/1] usb: chipidea: fix static checker warning for NULL pointer
2019-01-18 1:35 UTC
[7/7] usb: typec: ucsi: add firmware flashing support
2019-01-18 1:13 UTC
[6/7] usb: typec: ucsi: add check for supported vendor
2019-01-18 1:13 UTC
[5/7] usb: typec: ucsi: add fw update needed check
2019-01-18 1:12 UTC
[4/7] usb: typec: ucsi: add cmd used for fw flashing
2019-01-18 1:09 UTC
[3/7] usb: typec: ucsi: add port num info
2019-01-18 1:09 UTC
[2/7] usb: typec: ucsi: add ccg command framework
2019-01-18 1:09 UTC
[1/7] usb: typec: ucsi: add get_fw_info function
2019-01-18 1:09 UTC
[v3,4/4] usb: musb: Kconfig: Drop dependency on CONFIG_USB for jz4740
2019-01-17 22:33 UTC
[v3,3/4] usb: musb: Kconfig: Drop dependency on MACH_JZ4740 for jz4740
2019-01-17 22:33 UTC
[v3,2/4] usb: musb: jz4740: Add support for devicetree
2019-01-17 22:33 UTC
[v3,1/4] Documentation: dt: Add binding info for jz4740-musb driver
2019-01-17 22:33 UTC
[v2,3/4] usb: musb: Kconfig: Drop dependency on MACH_JZ4740 for jz4740
2019-01-17 22:31 UTC
[v2,3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
2019-01-17 17:57 UTC
USB:Serial:pl2303:Add new Pull-UP Mode to support PL2303HXD(TYPE_HX)
2019-01-17 16:48 UTC
usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-17 16:38 UTC
usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers
2019-01-17 16:29 UTC
USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)
2019-01-17 16:28 UTC
[v2,1/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
2019-01-17 16:08 UTC
[v3,4/4] usb: musb: Add support for MediaTek musb controller
2019-01-17 14:33 UTC
USB: usbip: delete README file
2019-01-17 14:32 UTC
[v3,1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-17 12:41 UTC
[V3] usb:xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
2019-01-17 11:55 UTC
[v3,1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-17 11:06 UTC
[1/1] usb: chipidea: fix static checker warning for NULL pointer
2019-01-17 10:58 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).