messages from 2019-01-21 07:13:12 to 2019-01-23 20:57:25 UTC [more...]
[v5,4/4] Bluetooth: btusb: Use the cmd_timeout method to reset the Intel BT chip
2019-01-23 20:57 UTC
[v5,3/4] Bluetooth: Allow driver specific cmd timeout handling
2019-01-23 20:57 UTC
[v5,2/4] usb: assign ACPI companions for embedded USB devices
2019-01-23 20:57 UTC
[v5,1/4] usb: split code locating ACPI companion into port and device
2019-01-23 20:57 UTC
MUSB interrupt storm on device removal
2019-01-23 20:50 UTC
MUSB interrupt storm on device removal
2019-01-23 20:44 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 20:36 UTC
MUSB interrupt storm on device removal
2019-01-23 20:12 UTC
[v3,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-23 20:01 UTC
[v3,04/10] usb: ehci-orion: add S2RAM support
2019-01-23 19:58 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 19:18 UTC
[v3,5/5] usb :fsl: Change string format for errata property
2019-01-23 19:17 UTC
[v3,4/5] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
2019-01-23 19:15 UTC
[v3,3/5] usb: host: Stops USB controller init if PLL fails to lock
2019-01-23 19:12 UTC
[v3,1/5] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-23 19:11 UTC
[v3,2/5] usb: phy: Workaround for USB erratum-A005728
2019-01-23 19:10 UTC
[v2,7/7] Move the resid member from struct scsi_data_buffer into struct scsi_cmnd
2019-01-23 19:10 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 18:55 UTC
[6/8] power: reset: at91-reset: add support for sam9x60 SoC
2019-01-23 18:34 UTC
usb: musb: Fix potential NULL dereference
2019-01-23 17:51 UTC
MUSB interrupt storm on device removal
2019-01-23 17:42 UTC
MUSB interrupt storm on device removal
2019-01-23 16:53 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 16:51 UTC
[-next] usb: host: drop pointless static qualifier
2019-01-23 16:09 UTC
MUSB interrupt storm on device removal
2019-01-23 16:05 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 15:46 UTC
MUSB interrupt storm on device removal
2019-01-23 15:21 UTC
MUSB interrupt storm on device removal
2019-01-23 14:55 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 14:47 UTC
[-next] usb: gadget: Remove dead branch code
2019-01-23 14:31 UTC
[v4,2/2] usb: chipidea: imx: set power polarity
2019-01-23 14:31 UTC
[v4,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-23 14:31 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 14:23 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 14:17 UTC
[-next,2/2] usb: ftdi-elan: Fix if == else warnings in ftdi_elan_respond_engine
2019-01-23 14:16 UTC
[-next,1/2] usb: ftdi-elan: remove a unnecessary variable 'empty_packets'
2019-01-23 14:16 UTC
MUSB interrupt storm on device removal
2019-01-23 14:09 UTC
[-next] usb: ftdi-elan: Fix if == else warnings in ftdi_elan_respond_engine
2019-01-23 13:55 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-23 13:51 UTC
[-next] usb: ftdi-elan: Fix if == else warnings in ftdi_elan_respond_engine
2019-01-23 13:41 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 13:21 UTC
[-next] usb: ftdi-elan: Fix if == else warnings in ftdi_elan_respond_engine
2019-01-23 13:17 UTC
[-next] usb: ftdi-elan: Fix if == else warnings in ftdi_elan_respond_engine
2019-01-23 12:43 UTC
[-next] usb: ftdi-elan: Fix if == else warnings in ftdi_elan_respond_engine
2019-01-23 12:34 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 12:12 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 12:09 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 11:58 UTC
[3/3] lib: Introduce test_stackinit module
2019-01-23 11:03 UTC
[2/3] gcc-plugins: Introduce stackinit plugin
2019-01-23 11:03 UTC
[1/3] treewide: Lift switch variables out of switches
2019-01-23 11:03 UTC
MUSB interrupt storm on device removal
2019-01-23 8:55 UTC
[-next] usb: host: drop pointless static qualifier
2019-01-23 8:37 UTC
[v3,5/5] usb :fsl: Change string format for errata property
2019-01-23 7:05 UTC
[v3,4/5] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
2019-01-23 7:05 UTC
[v3,3/5] usb: host: Stops USB controller init if PLL fails to lock
2019-01-23 7:05 UTC
[v3,2/5] usb: phy: Workaround for USB erratum-A005728
2019-01-23 7:05 UTC
[v3,1/5] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-23 7:05 UTC
MUSB interrupt storm on device removal
2019-01-23 6:52 UTC
[v4,1/5] usb: split code locating ACPI companion into port and device
2019-01-23 6:36 UTC
usb: chipidea: imx: remove unused header files
2019-01-23 5:49 UTC
usbip: Fix vep_free_request() null pointer checks on input args
2019-01-22 23:05 UTC
[v4,1/5] usb: split code locating ACPI companion into port and device
2019-01-22 22:42 UTC
[v4,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2019-01-22 22:36 UTC
[v4,4/5] Bluetooth: btusb: Collect the common Intel assignments together
2019-01-22 22:35 UTC
[v4,3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
2019-01-22 22:34 UTC
[v4,2/5] usb: assign ACPI companions for embedded USB devices
2019-01-22 22:29 UTC
[v4,1/5] usb: split code locating ACPI companion into port and device
2019-01-22 22:28 UTC
usb: gadget: udc: net2272: Fix bitwise and boolean operations
2019-01-22 21:28 UTC
[v3,2/3] usb: dwc3: qcom: Add support for MSM8998
2019-01-22 21:15 UTC
MUSB interrupt storm on device removal
2019-01-22 20:52 UTC
MUSB interrupt storm on device removal
2019-01-22 20:16 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-22 19:16 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-22 17:38 UTC
MUSB interrupt storm on device removal
2019-01-22 17:19 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-22 16:13 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-22 16:08 UTC
[4/4] sisusb: remove useless macros and compact the code
2019-01-22 15:57 UTC
usb: typec: tpcm: improve error handling of tcpm_register_port
2019-01-22 15:36 UTC
[1/4] tty: sisusb_con, convert addr macros to functions
2019-01-22 15:26 UTC
[1/4] tty: sisusb_con, convert addr macros to functions
2019-01-22 15:23 UTC
[4/4] sisusb: remove useless macros and compact the code
2019-01-22 15:12 UTC
[3/4] sisusb: let files build only when needed
2019-01-22 15:12 UTC
[2/4] tty: sisusb_con, cleanup configs
2019-01-22 15:12 UTC
[1/4] tty: sisusb_con, convert addr macros to functions
2019-01-22 15:11 UTC
MUSB interrupt storm on device removal
2019-01-22 14:57 UTC
[v4,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-22 14:33 UTC
usb: gadget: fix various indentation issues
2019-01-22 14:26 UTC
usb: core: endpoint: Add error messages for usb_create_ep_devs()
2019-01-22 14:19 UTC
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
2019-01-22 14:04 UTC
[1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-01-22 13:45 UTC
[4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
2019-01-22 13:41 UTC
[2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-22 13:40 UTC
usb: typec: tpcm: improve error handling of tcpm_register_port
2019-01-22 13:27 UTC
[RFC,3/5] usb: roles: Find the muxes by also matching against the device node
2019-01-22 13:23 UTC
[2/2] dwc3: add power down clock scale setting when init core
2019-01-22 10:37 UTC
[1/2] Documentation: usb: dwc3: add power down clock scale property
2019-01-22 10:37 UTC
usb: phy: fix link errors
2019-01-22 10:36 UTC
[v4,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-22 9:36 UTC
[4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
2019-01-22 9:08 UTC
[2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-22 9:00 UTC
usb: typec: tpcm: improve error handling of tcpm_register_port
2019-01-22 9:00 UTC
[v2] usb: dwc3: exynos: Fix error handling of clk_prepare_enable
2019-01-22 8:20 UTC
[v2,1/6] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-22 8:08 UTC
[v2,3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-22 8:04 UTC
[v3] usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2019-01-22 7:56 UTC
[v3,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-22 7:50 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-22 7:27 UTC
[RFC,3/5] usb: roles: Find the muxes by also matching against the device node
2019-01-22 5:40 UTC
[v2] usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2019-01-22 4:28 UTC
[1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-01-22 2:38 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-22 2:18 UTC
[v4,6/6] usb: musb: Add support for MediaTek musb controller
2019-01-22 1:45 UTC
[v4,5/6] usb: musb: Add musb_clearb/w() interface
2019-01-22 1:43 UTC
[4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
2019-01-22 1:10 UTC
[2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-22 1:07 UTC
[1/8] dt-bindings: arm: atmel: add missing samx7 to reset controller
2019-01-22 1:05 UTC
[1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-01-22 1:03 UTC
[v3,3/3] arm64: dts: qcom: msm8998: Add USB-related nodes
2019-01-21 21:33 UTC
[v3,2/3] usb: dwc3: qcom: Add support for MSM8998
2019-01-21 21:33 UTC
[v3,1/3] dt-bindings: usb: Add support for msm8998
2019-01-21 21:32 UTC
[v2] usb: dwc3: exynos: Fix error handling of clk_prepare_enable
2019-01-21 21:23 UTC
MUSB interrupt storm on device removal
2019-01-21 21:20 UTC
[v3,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-01-21 18:00 UTC
[v2,2/2] usb: chipidea: imx: set power polarity
2019-01-21 17:57 UTC
[v2,19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-21 17:18 UTC
MUSB interrupt storm on device removal
2019-01-21 16:31 UTC
[v2] usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2019-01-21 16:17 UTC
[v4,6/6] usb: musb: Add support for MediaTek musb controller
2019-01-21 16:07 UTC
[v4,5/6] usb: musb: Add musb_clearb/w() interface
2019-01-21 15:59 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-21 15:47 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-21 15:44 UTC
[v3,1/4] Documentation: dt: Add binding info for jz4740-musb driver
2019-01-21 15:18 UTC
[v4,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-21 15:14 UTC
usb: core: endpoint: Add error messages for usb_create_ep_devs()
2019-01-21 14:35 UTC
usb: misc: usb3503: Add system sleep support in non-I2C mode
2019-01-21 14:33 UTC
usb: core: endpoint: Add error messages for usb_create_ep_devs()
2019-01-21 14:30 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-01-21 14:02 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2019-01-21 13:51 UTC
[v3] usb: dwc2: gadget: Add scatter-gather mode
2019-01-21 13:44 UTC
[v4,6/6] usb: musb: Add support for MediaTek musb controller
2019-01-21 12:22 UTC
[v4,5/6] usb: musb: Add musb_clearb/w() interface
2019-01-21 12:22 UTC
[v4,4/6] usb: musb: Add noirq type of dma create interface
2019-01-21 12:22 UTC
[v4,3/6] usb: musb: Add get/set toggle hooks
2019-01-21 12:22 UTC
[v4,2/6] arm: dts: mt2701: Add usb2 device nodes
2019-01-21 12:22 UTC
[v4,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-21 12:22 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-21 12:15 UTC
[v3,10/10] ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs
2019-01-21 11:23 UTC
[v3,09/10] ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
2019-01-21 11:23 UTC
[v3,08/10] ARM64: dts: marvell: armada-37xx: fix USB2 memory region
2019-01-21 11:23 UTC
[v3,07/10] MAINTAINERS: phy: fill Armada 3700 PHY drivers entry
2019-01-21 11:23 UTC
[v3,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-21 11:23 UTC
[v3,05/10] phy: add A3700 UTMI PHY driver
2019-01-21 11:23 UTC
[v3,04/10] usb: ehci-orion: add S2RAM support
2019-01-21 11:23 UTC
[v3,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-21 11:23 UTC
[v3,02/10] usb: host: xhci: mvebu: add reset on resume quirk
2019-01-21 11:23 UTC
[v3,01/10] usb: core: comply to PHY framework
2019-01-21 11:23 UTC
USB: storage: karma: add whitespace after declarations
2019-01-21 11:04 UTC
[v2,02/10] usb: host: xhci: mvebu: add reset on resume quirk
2019-01-21 10:54 UTC
[v2,05/10] phy: add A3700 UTMI PHY driver
2019-01-21 10:37 UTC
[v2,6/6] usb :fsl: Change string format for errata property
2019-01-21 10:25 UTC
[v2,5/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_14
2019-01-21 10:25 UTC
[v2,4/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
2019-01-21 10:25 UTC
[v2,3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-21 10:25 UTC
[v2,2/6] usb: phy: Workaround for USB erratum-A005728
2019-01-21 10:25 UTC
[v2,1/6] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-21 10:25 UTC
[v2,05/10] phy: add A3700 UTMI PHY driver
2019-01-21 10:24 UTC
[v1,3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-21 10:08 UTC
usb: dwc3: gadget: issue a stop command for ISOC endpoint
2019-01-21 10:02 UTC
[v2,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-21 10:00 UTC
usb: dwc3: exynos: Fix error handling of clk_prepare_enable
2019-01-21 9:56 UTC
[v2,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-21 9:55 UTC
[v2] usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2019-01-21 9:33 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-21 9:31 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-21 9:29 UTC
usb: dwc3: gadget: don't remove the request if bus-expired
2019-01-21 9:03 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2019-01-21 8:40 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2019-01-21 8:36 UTC
[v1,3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-21 8:16 UTC
[v2,21/21] memblock: drop memblock_alloc_*_nopanic() variants
2019-01-21 8:04 UTC
[v2,20/21] memblock: memblock_alloc_try_nid: don't panic
2019-01-21 8:04 UTC
[v2,19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,18/21] swiotlb: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,17/21] init/main: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,16/21] mm/percpu: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,15/21] sparc: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,14/21] ia64: add checks for the return value of memblock_alloc*()
2019-01-21 8:04 UTC
[v2,13/21] arch: don't memset(0) memory returned by memblock_alloc()
2019-01-21 8:04 UTC
[v2,12/21] arch: use memblock_alloc() instead of memblock_alloc_from(size, align, 0)
2019-01-21 8:03 UTC
[v2,11/21] memblock: make memblock_find_in_range_node() and choose_memblock_flags() static
2019-01-21 8:03 UTC
[v2,10/21] memblock: refactor internal allocation functions
2019-01-21 8:03 UTC
[v2,09/21] memblock: drop memblock_alloc_base()
2019-01-21 8:03 UTC
[v2,08/21] memblock: drop __memblock_alloc_base()
2019-01-21 8:03 UTC
[v2,07/21] memblock: memblock_phys_alloc(): don't panic
2019-01-21 8:03 UTC
[v2,06/21] memblock: memblock_phys_alloc_try_nid(): don't panic
2019-01-21 8:03 UTC
[v2,05/21] memblock: emphasize that memblock_alloc_range() returns a physical address
2019-01-21 8:03 UTC
[v2,04/21] memblock: drop memblock_alloc_base_nid()
2019-01-21 8:03 UTC
[v2,03/21] memblock: replace memblock_alloc_base(ANYWHERE) with memblock_phys_alloc
2019-01-21 8:03 UTC
[v2,02/21] powerpc: use memblock functions returning virtual address
2019-01-21 8:03 UTC
[v2,01/21] openrisc: prefer memblock APIs returning virtual address
2019-01-21 8:03 UTC
usb: dwc2: Reset device address on EnumDone
2019-01-21 7:13 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).