messages from 2019-01-24 20:05:35 to 2019-01-31 16:53:13 UTC [more...]
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-31 16:53 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-31 15:13 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-31 14:56 UTC
[2/2] usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() call
2019-01-31 14:53 UTC
[1/2] usb: gadget: move non-super speed code out of usb_ep_autoconfig_ss()
2019-01-31 14:53 UTC
usb: dwc2: Fix EP TxFIFO number setting
2019-01-31 14:28 UTC
[v2,7/9] usb: typec: Find the ports by also matching against the device node
2019-01-31 13:35 UTC
[v3,4/6] usb:common Simplify usb_decode_get_set_descriptor function
2019-01-31 12:27 UTC
[v3,6/6] usb:cdns3 Fix for stuck packets in on-chip OUT buffer
2019-01-31 11:52 UTC
[v3,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-01-31 11:52 UTC
[v3,4/6] usb:common Simplify usb_decode_get_set_descriptor function
2019-01-31 11:52 UTC
[v3,3/6] usb:common Patch simplify usb_decode_set_clear_feature function
2019-01-31 11:52 UTC
[v3,2/6] usb:common Separated decoding functions from dwc3 driver
2019-01-31 11:52 UTC
[v3,1/6] dt-bindings: add binding for USBSS-DRD controller
2019-01-31 11:52 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-31 10:42 UTC
[1/8] platform/x86: intel_cht_int33fe: Remove connection for the alt mode mux
2019-01-31 10:04 UTC
[RFC] USB: PCI: set 32bit DMA mask for PCI based USB controllers
2019-01-31 9:54 UTC
usb: typec: tcpm: Correct the PPS out_volt calculation
2019-01-31 8:46 UTC
usb: typec: tcpm: Correct the PPS out_volt calculation
2019-01-31 8:01 UTC
[v2] usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-31 7:47 UTC
usb: typec: tcpm: Correct the PPS out_volt calculation
2019-01-31 7:31 UTC
[v2,19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-31 7:14 UTC
[v2,19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-31 7:07 UTC
usb: typec: tcpm: Export partner Source Capabilities
2019-01-31 7:02 UTC
[v2,19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-31 6:44 UTC
[v2,19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-31 6:41 UTC
[v2,19/21] treewide: add checks for the return value of memblock_alloc*()
2019-01-31 6:07 UTC
usb: typec: tcpm: Export partner Source Capabilities
2019-01-31 3:54 UTC
[v2] usb: xhci: remove unused member 'parent' in xhci_regset struct
2019-01-31 1:51 UTC
usb: xhci: remove unused member 'parent' in xhci_regset struct
2019-01-31 1:46 UTC
[RFC] USB: PCI: set 32bit DMA mask for PCI based USB controllers
2019-01-31 1:19 UTC
[v2,3/6] usb: typec: ucsi: add port num info
2019-01-31 1:07 UTC
[v2,2/6] usb: typec: ucsi: add ccg command framework
2019-01-31 1:04 UTC
[v2,6/6] usb: typec: ucsi: add firmware flashing support
2019-01-31 0:48 UTC
[v2,6/6] usb: typec: ucsi: add firmware flashing support
2019-01-31 0:47 UTC
[v2,1/6] usb: typec: ucsi: add get_fw_info function
2019-01-31 0:34 UTC
[v2,1/6] usb: typec: ucsi: add get_fw_info function
2019-01-31 0:33 UTC
[v2,1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings
2019-01-30 20:02 UTC
[v3,2/2] phy: qualcomm: usb: Add SuperSpeed PHY driver
2019-01-30 18:50 UTC
[v3,1/2] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
2019-01-30 18:50 UTC
[1/1] usb: phy: Kconfig: change FSL_USB2_OTG as tristate
2019-01-30 18:25 UTC
usb: typec: tcpm: Correct the PPS out_volt calculation
2019-01-30 17:12 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-30 16:56 UTC
[v2,7/9] usb: typec: Find the ports by also matching against the device node
2019-01-30 16:51 UTC
[v3,1/3] dt-bindings: usb: Add support for msm8998
2019-01-30 16:45 UTC
[v2] usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-01-30 16:30 UTC
[v2,9/9] device connection: Find device connections also from device graphs
2019-01-30 16:02 UTC
[v2,8/9] device connection: Prepare support for firmware described connections
2019-01-30 16:02 UTC
[v2,7/9] usb: typec: Find the ports by also matching against the device node
2019-01-30 16:02 UTC
[v2,6/9] usb: roles: Find the muxes by also matching against the device node
2019-01-30 16:02 UTC
[v2,5/9] usb: typec: mux: Find the muxes by also matching against the device node
2019-01-30 16:02 UTC
[v2,4/9] device connection: Add fwnode member to struct device_connection
2019-01-30 16:02 UTC
[v2,3/9] platform/x86: intel_cht_int33fe: Remove old style mux connections
2019-01-30 16:02 UTC
[v2,2/9] usb: typec: Rationalize the API for the muxes
2019-01-30 16:02 UTC
[v2,1/9] platform/x86: intel_cht_int33fe: Prepare for better mux naming scheme
2019-01-30 16:02 UTC
[v2] USB: Disable USB2 LPM at shutdown
2019-01-30 16:01 UTC
[v3,1/3] dt-bindings: usb: Add support for msm8998
2019-01-30 15:42 UTC
usb: core: Move variable initialization to appropriate place
2019-01-30 15:38 UTC
[v2] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-30 15:15 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-30 14:58 UTC
[v2] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-30 14:49 UTC
usb: core: Move variable initialization to appropriate place
2019-01-30 14:48 UTC
[v2,3/6] usb: typec: ucsi: add port num info
2019-01-30 14:47 UTC
[v2,2/6] usb: typec: ucsi: add ccg command framework
2019-01-30 14:38 UTC
[v2] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-30 14:13 UTC
[1/1] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-30 13:59 UTC
[v2,21/21] memblock: drop memblock_alloc_*_nopanic() variants
2019-01-30 13:38 UTC
[1/1] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-30 13:33 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-30 12:38 UTC
[v2,2/2] phy: qualcomm: usb: Add Super-Speed PHY driver
2019-01-30 12:27 UTC
[v2,2/2] phy: qualcomm: usb: Add Super-Speed PHY driver
2019-01-30 11:38 UTC
usb: typec: tcpm: Correct the PPS out_volt calculation
2019-01-30 10:39 UTC
[v2,2/2] phy: qualcomm: usb: Add Super-Speed PHY driver
2019-01-30 9:53 UTC
[1/1] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-30 8:24 UTC
[v2] USB: Disable USB2 LPM at shutdown
2019-01-30 8:21 UTC
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
2019-01-30 8:11 UTC
[v2,6/6] usb: typec: ucsi: add firmware flashing support
2019-01-30 7:49 UTC
[v2,1/6] usb: typec: ucsi: add get_fw_info function
2019-01-30 7:47 UTC
[v2,6/6] usb: typec: ucsi: add firmware flashing support
2019-01-30 7:47 UTC
[v2,1/6] usb: typec: ucsi: add get_fw_info function
2019-01-30 7:43 UTC
[RFC] USB: PCI: set 32bit DMA mask for PCI based USB controllers
2019-01-30 7:40 UTC
[1/1] usb: phy: Kconfig: change FSL_USB2_OTG as tristate
2019-01-30 7:28 UTC
usb: xhci: remove unused member 'parent' in xhci_regset struct
2019-01-30 7:12 UTC
[RFC] USB: PCI: set 32bit DMA mask for PCI based USB controllers
2019-01-30 7:01 UTC
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
2019-01-30 6:53 UTC
usb: typec: tcpm: Correct the PPS out_volt calculation
2019-01-30 3:13 UTC
usb: xhci: remove unused member 'parent' in xhci_regset struct
2019-01-30 2:12 UTC
[v2,1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings
2019-01-29 20:38 UTC
[v2,2/2] phy: qualcomm: usb: Add Super-Speed PHY driver
2019-01-29 20:27 UTC
[v2,2/2] phy: qualcomm: usb: Add Super-Speed PHY driver
2019-01-29 11:35 UTC
[v2,1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings
2019-01-29 11:35 UTC
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
2019-01-29 10:44 UTC
[v2,09/21] memblock: drop memblock_alloc_base()
2019-01-29 10:29 UTC
[v2,06/21] memblock: memblock_phys_alloc_try_nid(): don't panic
2019-01-29 9:58 UTC
[v2,06/21] memblock: memblock_phys_alloc_try_nid(): don't panic
2019-01-29 9:56 UTC
[v2,02/21] powerpc: use memblock functions returning virtual address
2019-01-29 9:52 UTC
[v5,4/4] usb: ehci-orion: add S2RAM support
2019-01-29 9:23 UTC
[v5,3/4] usb: ehci-orion: avoid double PHY initialization
2019-01-29 9:23 UTC
[v5,2/4] usb: host: xhci: mvebu: add reset on resume quirk
2019-01-29 9:23 UTC
[v5,1/4] usb: core: comply to PHY framework
2019-01-29 9:23 UTC
[v2,7/7] Move the resid member from struct scsi_data_buffer into struct scsi_cmnd
2019-01-29 8:37 UTC
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
2019-01-28 22:58 UTC
[v2,6/6] usb: typec: ucsi: add firmware flashing support
2019-01-28 20:37 UTC
[v2,5/6] usb: typec: ucsi: add fw update needed check
2019-01-28 20:37 UTC
[v2,4/6] usb: typec: ucsi: add cmd used for fw flashing
2019-01-28 20:37 UTC
[v2,3/6] usb: typec: ucsi: add port num info
2019-01-28 20:37 UTC
[v2,2/6] usb: typec: ucsi: add ccg command framework
2019-01-28 20:37 UTC
[v2,1/6] usb: typec: ucsi: add get_fw_info function
2019-01-28 20:37 UTC
[1/1] usb: gadget: musb: fix short isoc packets with inventra dma
2019-01-28 20:01 UTC
[4/8] usb: typec: mux: Find the muxes by also matching against the device node
2019-01-28 16:17 UTC
[4/8] usb: typec: mux: Find the muxes by also matching against the device node
2019-01-28 15:46 UTC
[v4,4/5] usb: host: Stops USB controller init if PLL fails to lock
2019-01-28 15:38 UTC
[v4,2/5] usb: phy: Workaround for USB erratum-A005728
2019-01-28 15:36 UTC
[v4,04/10] usb: ehci-orion: add S2RAM support
2019-01-28 15:36 UTC
[v4,1/5] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-28 15:33 UTC
[2/8] usb: typec: Rationalize the API for the muxes
2019-01-28 15:28 UTC
[v4,04/10] usb: ehci-orion: add S2RAM support
2019-01-28 15:27 UTC
[1/8] platform/x86: intel_cht_int33fe: Remove connection for the alt mode mux
2019-01-28 15:27 UTC
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
2019-01-28 14:53 UTC
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
2019-01-28 13:30 UTC
[v3] usb: dwc3: gadget: Handle 0 xfer length for OUT EP
2019-01-28 12:24 UTC
[1/8] platform/x86: intel_cht_int33fe: Remove connection for the alt mode mux
2019-01-28 10:44 UTC
[v4,04/10] usb: ehci-orion: add S2RAM support
2019-01-28 10:33 UTC
[8/8] device connection: Find device connections also from device graphs
2019-01-28 9:58 UTC
[4/8] usb: typec: mux: Find the muxes by also matching against the device node
2019-01-28 9:53 UTC
[2/8] usb: typec: Rationalize the API for the muxes
2019-01-28 9:50 UTC
[1/8] platform/x86: intel_cht_int33fe: Remove connection for the alt mode mux
2019-01-28 9:45 UTC
[5/8] arm64: tegra: Enable xudc on Jetson TX1
2019-01-28 8:36 UTC
[4/8] arm64: tegra: Add xudc node for Tegra210
2019-01-28 8:24 UTC
[4/6] arm64: tegra: Add XUSB and pad controller on Tegra186
2019-01-28 7:59 UTC
[3/6] usb: host: xhci-tegra: Add Tegra186 XUSB support
2019-01-28 7:57 UTC
[2/6] usb: host: xhci-tegra: Selectively program IPFS
2019-01-28 7:54 UTC
[1/6] dt-bindings: usb: xhci-tegra: Add Tegra186 support
2019-01-28 7:46 UTC
USB: serial: cp210x: add GPIO support for CP2104
2019-01-28 5:57 UTC
[v2,01/21] openrisc: prefer memblock APIs returning virtual address
2019-01-27 3:07 UTC
usb: musb: Fix potential NULL dereference
2019-01-26 9:45 UTC
[v4,04/10] usb: ehci-orion: add S2RAM support
2019-01-26 2:56 UTC
usb: musb: Fix potential NULL dereference
2019-01-25 21:37 UTC
[v2,06/21] memblock: memblock_phys_alloc_try_nid(): don't panic
2019-01-25 19:32 UTC
[2/7] usb: typec: ucsi: add ccg command framework
2019-01-25 18:19 UTC
[v2,06/21] memblock: memblock_phys_alloc_try_nid(): don't panic
2019-01-25 17:45 UTC
usb: musb: Fix potential NULL dereference
2019-01-25 16:44 UTC
usb: musb: Fix potential NULL dereference
2019-01-25 16:37 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-25 16:21 UTC
usbip: Fix vep_free_request() null pointer checks on input args
2019-01-25 16:05 UTC
MUSB interrupt storm on device removal
2019-01-25 15:43 UTC
[v3] usb: warm-reset ports on hub resume, if requested
2019-01-25 15:14 UTC
usbip: Fix vep_free_request() null pointer checks on input args
2019-01-25 14:26 UTC
[2/7] usb: typec: ucsi: add ccg command framework
2019-01-25 14:04 UTC
[1/7] usb: typec: ucsi: add get_fw_info function
2019-01-25 13:55 UTC
[8/8] device connection: Find device connections also from device graphs
2019-01-25 13:15 UTC
[7/8] device connection: Prepare support for firmware described connections
2019-01-25 13:15 UTC
[6/8] usb: typec: Find the ports by also matching against the device node
2019-01-25 13:15 UTC
[5/8] usb: roles: Find the muxes by also matching against the device node
2019-01-25 13:15 UTC
[4/8] usb: typec: mux: Find the muxes by also matching against the device node
2019-01-25 13:15 UTC
[3/8] device connection: Add fwnode member to struct device_connection
2019-01-25 13:15 UTC
[2/8] usb: typec: Rationalize the API for the muxes
2019-01-25 13:15 UTC
[1/8] platform/x86: intel_cht_int33fe: Remove connection for the alt mode mux
2019-01-25 13:15 UTC
[v1,07/12] usb: roles: Find the usb role switch by also matching against the device node
2019-01-25 12:35 UTC
[6/6] arm64: tegra: Remove regulator hacks on Jetson TX2
2019-01-25 11:30 UTC
[5/6] arm64: tegra: Enable XUSB on P2771
2019-01-25 11:30 UTC
[4/6] arm64: tegra: Add XUSB and pad controller on Tegra186
2019-01-25 11:30 UTC
[3/6] usb: host: xhci-tegra: Add Tegra186 XUSB support
2019-01-25 11:30 UTC
[2/6] usb: host: xhci-tegra: Selectively program IPFS
2019-01-25 11:30 UTC
[1/6] dt-bindings: usb: xhci-tegra: Add Tegra186 support
2019-01-25 11:30 UTC
[v4,10/10] ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs
2019-01-25 10:39 UTC
[v4,09/10] ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
2019-01-25 10:39 UTC
[v4,08/10] ARM64: dts: marvell: armada-37xx: fix USB2 memory region
2019-01-25 10:39 UTC
[v4,07/10] MAINTAINERS: phy: fill Armada 3700 PHY drivers entry
2019-01-25 10:39 UTC
[v4,06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
2019-01-25 10:39 UTC
[v4,05/10] phy: add A3700 UTMI PHY driver
2019-01-25 10:39 UTC
[v4,04/10] usb: ehci-orion: add S2RAM support
2019-01-25 10:39 UTC
[v4,03/10] usb: ehci-orion: avoid double PHY initialization
2019-01-25 10:39 UTC
[v4,02/10] usb: host: xhci: mvebu: add reset on resume quirk
2019-01-25 10:39 UTC
[v4,01/10] usb: core: comply to PHY framework
2019-01-25 10:39 UTC
[v3,04/10] usb: ehci-orion: add S2RAM support
2019-01-25 10:35 UTC
USB: serial: cp210x: support all gpios on CP2102N QFN28 package
2019-01-25 9:52 UTC
[8/8] net: macb: add sam9x60-macb compatibility string
2019-01-25 9:16 UTC
[1/4] tty: sisusb_con, convert addr macros to functions
2019-01-25 9:03 UTC
usbip: Fix vep_free_request() null pointer checks on input args
2019-01-25 8:02 UTC
[v6,4/4] Bluetooth: btusb: Use the cmd_timeout method to reset the Intel BT chip
2019-01-25 7:51 UTC
[v6,3/4] Bluetooth: Allow driver specific cmd timeout handling
2019-01-25 7:51 UTC
[v6,2/4] usb: assign ACPI companions for embedded USB devices
2019-01-25 7:51 UTC
[v6,1/4] usb: split code locating ACPI companion into port and device
2019-01-25 7:51 UTC
net: usb: asix: ax88772_bind return error when hw_reset fail
2019-01-25 6:33 UTC
usb: chipidea: imx: Remove unused include <linux/of_gpio.h>
2019-01-25 6:23 UTC
usb: chipidea: imx: Remove unused include <linux/of_gpio.h>
2019-01-25 6:19 UTC
[v4,5/5] usb :fsl: Change string format for errata property
2019-01-25 6:03 UTC
[v4,4/5] usb: host: Stops USB controller init if PLL fails to lock
2019-01-25 6:03 UTC
[v4,3/5] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
2019-01-25 6:03 UTC
[v4,2/5] usb: phy: Workaround for USB erratum-A005728
2019-01-25 6:02 UTC
[v4,1/5] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-25 6:02 UTC
[v4,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-01-25 2:07 UTC
[v6,4/4] Bluetooth: btusb: Use the cmd_timeout method to reset the Intel BT chip
2019-01-24 23:28 UTC
[v6,3/4] Bluetooth: Allow driver specific cmd timeout handling
2019-01-24 23:28 UTC
[v6,2/4] usb: assign ACPI companions for embedded USB devices
2019-01-24 23:28 UTC
[v6,1/4] usb: split code locating ACPI companion into port and device
2019-01-24 23:28 UTC
[v2] usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path
2019-01-24 21:46 UTC
[v5,3/4] Bluetooth: Allow driver specific cmd timeout handling
2019-01-24 20:10 UTC
[v5,4/4] Bluetooth: btusb: Use the cmd_timeout method to reset the Intel BT chip
2019-01-24 20:05 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).