messages from 2019-02-06 06:44:04 to 2019-02-13 21:43:33 UTC [more...]
[v4,3/4] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
2019-02-13 21:43 UTC
[RFC,2/2] usb: quirks: Add quirk to fix card reader and suspend on MacBooks
2019-02-13 21:13 UTC
[RFC,1/2] usb: core: Add support of disabling SS link before system suspend
2019-02-13 21:13 UTC
USB: musb: mark expected switch fall-through
2019-02-13 18:15 UTC
usb: typec: tps6598x: Check mode of operation
2019-02-13 16:36 UTC
[1/6] dt-bindings: usb: xhci-tegra: Add Tegra186 support
2019-02-13 15:21 UTC
[3/8] dt-bindings: phy: tegra-xusb-padctl: Add nvidia,usb3-port-fake entry
2019-02-13 13:16 UTC
[3/8] dt-bindings: phy: tegra-xusb-padctl: Add nvidia,usb3-port-fake entry
2019-02-13 12:56 UTC
USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
2019-02-13 12:30 UTC
[3/8] dt-bindings: phy: tegra-xusb-padctl: Add nvidia,usb3-port-fake entry
2019-02-13 10:38 UTC
USB: musb: mark expected switch fall-through
2019-02-13 9:08 UTC
[v3,7/9] usb: typec: Find the ports by also matching against the device node
2019-02-13 8:38 UTC
[1/8] phy: tegra: xusb: t210: add XUSB device mode support
2019-02-13 8:35 UTC
[v3,1/9] platform/x86: intel_cht_int33fe: Prepare for better mux naming scheme
2019-02-13 8:34 UTC
[v3,9/9] device connection: Find device connections also from device graphs
2019-02-13 7:45 UTC
[v3,8/9] device connection: Prepare support for firmware described connections
2019-02-13 7:45 UTC
[v3,7/9] usb: typec: Find the ports by also matching against the device node
2019-02-13 7:45 UTC
[v3,6/9] usb: roles: Find the muxes by also matching against the device node
2019-02-13 7:45 UTC
[v3,5/9] usb: typec: mux: Find the muxes by also matching against the device node
2019-02-13 7:45 UTC
[v3,4/9] device connection: Add fwnode member to struct device_connection
2019-02-13 7:45 UTC
[v3,3/9] platform/x86: intel_cht_int33fe: Remove old style mux connections
2019-02-13 7:45 UTC
[v3,2/9] usb: typec: Rationalize the API for the muxes
2019-02-13 7:45 UTC
[v3,1/9] platform/x86: intel_cht_int33fe: Prepare for better mux naming scheme
2019-02-13 7:45 UTC
[1/4] usb: dwc3: gadget: clear DWC3_EP_TRANSFER_STARTED on cmd complete
2019-02-13 7:11 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-13 7:05 UTC
[1/8] phy: tegra: xusb: t210: add XUSB device mode support
2019-02-13 7:04 UTC
[1/8] phy: tegra: xusb: t210: add XUSB device mode support
2019-02-13 6:47 UTC
usb: dwc3: Reset num_trbs after skipping
2019-02-13 3:39 UTC
usb: typec: tcpm: Remove unused functions
2019-02-13 3:30 UTC
[1/4] usb: dwc3: gadget: clear DWC3_EP_TRANSFER_STARTED on cmd complete
2019-02-13 2:32 UTC
[v2,1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings
2019-02-12 20:47 UTC
USB: musb: mark expected switch fall-through
2019-02-12 19:23 UTC
[01/18] MIPS: lantiq: pass struct device to DMA API functions
2019-02-12 17:41 UTC
usb: typec: tcpm: Export partner Source Capabilities
2019-02-12 16:19 UTC
usb: typec: tcpm: Remove unused functions
2019-02-12 15:58 UTC
[1/1] usb: misc: usbtest: add super-speed isoc support
2019-02-12 15:28 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-12 15:27 UTC
[4/5] usb: typec: ucsi: Preliminary support for alternate modes
2019-02-12 15:22 UTC
[8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-02-12 15:14 UTC
[7/8] usb: dwc2: Add Amlogic G12A DWC2 Params
2019-02-12 15:14 UTC
[6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
2019-02-12 15:14 UTC
[5/8] phy: amlogic: add Amlogic G12A USB2 PHY Driver
2019-02-12 15:14 UTC
[4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-02-12 15:14 UTC
[3/8] dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible
2019-02-12 15:14 UTC
[2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
2019-02-12 15:14 UTC
[1/8] dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings
2019-02-12 15:14 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-12 13:15 UTC
[v2] USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX)
2019-02-12 12:50 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-12 11:58 UTC
[v2,6/9] usb: roles: Find the muxes by also matching against the device node
2019-02-12 11:24 UTC
usb: typec: tcpm: Export partner Source Capabilities
2019-02-12 10:54 UTC
[v2,6/9] usb: roles: Find the muxes by also matching against the device node
2019-02-12 10:41 UTC
usb: typec: tcpm: Export partner Source Capabilities
2019-02-12 10:33 UTC
usb: typec: tcpm: Export partner Source Capabilities
2019-02-12 10:32 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-12 9:30 UTC
[1/1] usb: misc: usbtest: add super-speed isoc support
2019-02-12 8:57 UTC
[v2,6/9] usb: roles: Find the muxes by also matching against the device node
2019-02-12 8:50 UTC
[v2,5/8] usb: ohci-da8xx: add vbus and overcurrent gpios
2019-02-12 8:20 UTC
[01/18] MIPS: lantiq: pass struct device to DMA API functions
2019-02-12 7:45 UTC
[v2,6/9] usb: roles: Find the muxes by also matching against the device node
2019-02-12 6:03 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-12 0:06 UTC
[4/5] usb: typec: ucsi: Preliminary support for alternate modes
2019-02-11 23:43 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 17:49 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 17:33 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 17:22 UTC
[5/5] usb: musb: Kconfig: Drop dependency on CONFIG_USB for jz4740
2019-02-11 17:14 UTC
[4/5] usb: musb: Kconfig: Drop dependency on MACH_JZ4740 for jz4740
2019-02-11 17:14 UTC
[3/5] usb: musb: jz4740: Add support for devicetree
2019-02-11 17:14 UTC
[2/5] Documentation: dt: Add binding info for jz4740-musb driver
2019-02-11 17:14 UTC
[1/5] USB: musb: fix indentation issue on a return statement
2019-02-11 17:14 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 15:57 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 15:27 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 15:12 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 15:10 UTC
usb: phy: twl6030-usb: fix possible use-after-free on remove
2019-02-11 15:04 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 14:04 UTC
[v3,2/6] usb:common Separated decoding functions from dwc3 driver
2019-02-11 13:30 UTC
[12/18] fotg210-udc: remove a bogus dma_sync_single_for_device call
2019-02-11 13:30 UTC
[v3,2/6] usb:common Separated decoding functions from dwc3 driver
2019-02-11 13:20 UTC
[12/18] fotg210-udc: remove a bogus dma_sync_single_for_device call
2019-02-11 13:12 UTC
[v3,2/6] usb:common Separated decoding functions from dwc3 driver
2019-02-11 12:56 UTC
[v2,6/9] usb: roles: Find the muxes by also matching against the device node
2019-02-11 12:40 UTC
[v3,4/6] usb:common Simplify usb_decode_get_set_descriptor function
2019-02-11 12:21 UTC
[v2,7/9] usb: typec: Find the ports by also matching against the device node
2019-02-11 11:52 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 11:06 UTC
[v2,6/9] usb: roles: Find the muxes by also matching against the device node
2019-02-11 10:46 UTC
[v2,8/8] usb: ohci-da8xx: remove unused callbacks from platform data
2019-02-11 10:37 UTC
[v2,7/8] ARM: davinci: da830-evm: remove legacy usb helpers
2019-02-11 10:37 UTC
[v2,6/8] ARM: davinci: omapl138-hawk: remove legacy usb helpers
2019-02-11 10:37 UTC
[v2,5/8] usb: ohci-da8xx: add vbus and overcurrent gpios
2019-02-11 10:36 UTC
[v2,4/8] ARM: davinci: da830-evm: use gpio lookup entries for usb gpios
2019-02-11 10:36 UTC
[v2,3/8] ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios
2019-02-11 10:36 UTC
[v2,2/8] usb: ohci-da8xx: add a helper pointer to &pdev->dev
2019-02-11 10:36 UTC
[v2,1/8] usb: ohci-da8xx: add a new line after local variables
2019-02-11 10:36 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 10:33 UTC
USB: serial: pl2303: add Delock Infrared device id
2019-02-11 10:17 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 10:04 UTC
[v2,6/9] usb: roles: Find the muxes by also matching against the device node
2019-02-11 9:58 UTC
[v2,7/9] usb: typec: Find the ports by also matching against the device node
2019-02-11 8:39 UTC
USB: serial: pl2303: add Delock Infrared device id
2019-02-11 8:24 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-11 7:44 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-10 17:39 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-10 10:22 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-02-10 9:41 UTC
USB: serial: pl2303: add Delock Infrared device id
2019-02-09 22:19 UTC
USB: serial: pl2303: add Delock Infrared device id
2019-02-09 15:41 UTC
USB: serial: pl2303: add Delock Infrared device id
2019-02-09 10:44 UTC
USB: serial: pl2303: add Delock Infrared device id
2019-02-09 9:46 UTC
USB: serial: pl2303: add Delock Infrared device id
2019-02-09 9:08 UTC
USB: serial: pl2303: add Delock Infrared device id
2019-02-09 8:48 UTC
[net-next] net: usb: cdc-phonet: use struct_size() in alloc_netdev()
2019-02-09 6:58 UTC
[CFT] signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio
2019-02-08 21:57 UTC
[net-next] net: usb: rtl8150: mark expected switch fall-through
2019-02-08 19:55 UTC
[net-next] net: usb: pegasus: Mark expected switch fall-through
2019-02-08 19:55 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-02-08 19:35 UTC
[net-next] net: usb: rtl8150: mark expected switch fall-through
2019-02-08 19:09 UTC
[net-next] net: usb: pegasus: Mark expected switch fall-through
2019-02-08 19:07 UTC
[2/2] drivers: xhci: Add quirk to reset xHCI port PHY
2019-02-08 18:48 UTC
[2/3] udc: net2280: Fix overrun of OUT messages
2019-02-08 17:26 UTC
usb: host: oxu210hp-hcd: fix indentation issue
2019-02-08 15:52 UTC
[4/5] usb: typec: ucsi: Preliminary support for alternate modes
2019-02-08 13:48 UTC
[4/8] ARM: davinci: da830-evm: use gpio lookup entries for usb gpios
2019-02-08 13:34 UTC
[3/8] ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios
2019-02-08 13:33 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-02-08 12:52 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-02-08 12:36 UTC
[2/2] drivers: xhci: Add quirk to reset xHCI port PHY
2019-02-08 12:35 UTC
[5/8] usb: ohci-da8xx: add vbus and overcurrent gpios
2019-02-08 11:29 UTC
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
2019-02-08 11:00 UTC
[net-next] net: usb: cdc-phonet: use struct_size() in alloc_netdev()
2019-02-08 3:13 UTC
[CFT] signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio
2019-02-08 2:34 UTC
[v2] xhci: Drop superfluous initialization in xhci_queue_ctrl_tx()
2019-02-08 1:49 UTC
[v2] xhci: Use __ffs() to find page size in xhci_mem_init()
2019-02-08 1:48 UTC
[v2] xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()
2019-02-08 1:48 UTC
[01/18] MIPS: lantiq: pass struct device to DMA API functions
2019-02-07 23:29 UTC
[4/5] usb: typec: ucsi: Preliminary support for alternate modes
2019-02-07 22:01 UTC
xhci: Drop superfluous initialization in xhci_queue_ctrl_tx()
2019-02-07 21:07 UTC
xhci: Use ffs() to find page size in xhci_mem_init()
2019-02-07 21:06 UTC
xhci: Convert xhci_handshake() to use readl_poll_timeout()
2019-02-07 21:03 UTC
usb: dwc3: haps: Workaround matching VID PID
2019-02-07 20:59 UTC
[v5,2/2] usb: typec: ucsi: add firmware flashing support
2019-02-07 19:18 UTC
[v5,1/2] usb: typec: ucsi: add get_fw_info function
2019-02-07 19:18 UTC
[v4,2/2] usb: typec: ucsi: add firmware flashing support
2019-02-07 18:57 UTC
xhci: Drop superfluous initialization in xhci_queue_ctrl_tx()
2019-02-07 16:43 UTC
[2/2] drivers: xhci: Add quirk to reset xHCI port PHY
2019-02-07 15:17 UTC
[2/2] drivers: xhci: Add quirk to reset xHCI port PHY
2019-02-07 15:06 UTC
USB: serial: cp210x: Add ID for Ingenico 3070
2019-02-07 14:24 UTC
[v2] USB: serial: cp210x: add minimun baud rate for CP2105 SCI
2019-02-07 14:20 UTC
USB: serial: cp210x: Fix GPIO in autosuspend
2019-02-07 13:57 UTC
[4/5] usb: typec: ucsi: Preliminary support for alternate modes
2019-02-07 13:15 UTC
xhci: Use ffs() to find page size in xhci_mem_init()
2019-02-07 11:54 UTC
[v4,4/4] phy: qualcomm: usb: Add SuperSpeed PHY driver
2019-02-07 11:17 UTC
[v4,3/4] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
2019-02-07 11:17 UTC
[v4,2/4] dt-bindings: connector: Add vbus-supply property
2019-02-07 11:17 UTC
[v4,1/4] dt-bindings: phy: remove qcom-dwc3-usb-phy
2019-02-07 11:17 UTC
usb: dwc3: haps: Workaround matching VID PID
2019-02-07 11:16 UTC
usb: dwc2: gadget: Consider VBUS discharge time in disconnect flow
2019-02-07 11:15 UTC
[1/6] dt-bindings: usb: xhci-tegra: Add Tegra186 support
2019-02-07 11:14 UTC
[v4,2/2] usb: typec: ucsi: add firmware flashing support
2019-02-07 11:08 UTC
xhci: Use ffs() to find page size in xhci_mem_init()
2019-02-07 10:58 UTC
xhci: Use ffs() to find page size in xhci_mem_init()
2019-02-07 10:46 UTC
xhci: Use ffs() to find page size in xhci_mem_init()
2019-02-07 9:06 UTC
xhci: Use ffs() to find page size in xhci_mem_init()
2019-02-07 9:04 UTC
xhci: Convert xhci_handshake() to use readl_poll_timeout()
2019-02-07 8:45 UTC
xhci: Convert xhci_handshake() to use readl_poll_timeout()
2019-02-07 8:32 UTC
xhci: Use ffs() to find page size in xhci_mem_init()
2019-02-07 0:03 UTC
xhci: Drop superfluous initialization in xhci_queue_ctrl_tx()
2019-02-07 0:03 UTC
xhci: Convert xhci_handshake() to use readl_poll_timeout()
2019-02-07 0:03 UTC
[RFC,net-next] net: fixed_phy: Move the DT based link GPIO parsing to of_mdio.c
2019-02-06 22:41 UTC
[RFC,net-next] net: fixed_phy: Move the DT based link GPIO parsing to of_mdio.c
2019-02-06 22:38 UTC
[4/5] usb: typec: ucsi: Preliminary support for alternate modes
2019-02-06 22:36 UTC
[RFC,net-next] net: fixed_phy: Move the DT based link GPIO parsing to of_mdio.c
2019-02-06 21:53 UTC
USB: serial: cp210x: Fix GPIO in autosuspend
2019-02-06 21:43 UTC
[v4,2/2] usb: typec: ucsi: add firmware flashing support
2019-02-06 21:39 UTC
[v4,1/2] usb: typec: ucsi: add get_fw_info function
2019-02-06 21:39 UTC
[2/2] USB: gadget: pxa25x: Add DT probing
2019-02-06 21:31 UTC
[RFC,net-next] net: fixed_phy: Move the DT based link GPIO parsing to of_mdio.c
2019-02-06 20:51 UTC
usb: dwc2: gadget: Consider VBUS discharge time in disconnect flow
2019-02-06 18:52 UTC
usb: dwc3: haps: Workaround matching VID PID
2019-02-06 18:49 UTC
[RESEND] dt-bindings: arm: atmel: add new sam9x60 SFR binding
2019-02-06 18:04 UTC
[2/3] udc: net2280: Fix overrun of OUT messages
2019-02-06 17:44 UTC
USB: serial: cp210x: Add ID for Ingenico 3070
2019-02-06 16:14 UTC
[v2,1/2] dt-bindings: Add Qualcomm USB Super-Speed PHY bindings
2019-02-06 14:11 UTC
[2/3] udc: net2280: Fix overrun of OUT messages
2019-02-06 13:56 UTC
usb: dwc2: Reset device address on EnumDone
2019-02-06 12:33 UTC
USB: Fix configuration selection issues introduced in v4.20.0
2019-02-06 12:01 UTC
[RFC,v2] usb: xhci: add Immediate Data Transfer support
2019-02-06 10:54 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-02-06 10:17 UTC
[RFC,v2] usb: xhci: add Immediate Data Transfer support
2019-02-06 10:08 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-02-06 9:38 UTC
[v3,4/6] usb: typec: ucsi: add cmd used for fw flashing
2019-02-06 9:29 UTC
[v3,2/6] usb: typec: ucsi: add ccg command framework
2019-02-06 9:27 UTC
[4/5] usb: typec: ucsi: Preliminary support for alternate modes
2019-02-06 9:06 UTC
[v2] USB: serial: cp210x: add minimun baud rate for CP2105 SCI
2019-02-06 8:56 UTC
[5/5] usb: typec: ucsi: Support for DisplayPort alt mode
2019-02-06 8:46 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-02-06 8:41 UTC
[5/5] usb: typec: ucsi: Support for DisplayPort alt mode
2019-02-06 8:32 UTC
[4/5] usb: typec: ucsi: Preliminary support for alternate modes
2019-02-06 8:30 UTC
usb: gadget: function: f_uac1 add interface assoc desc
2019-02-06 6:51 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-02-06 6:49 UTC
usb: dwc2: Reset device address on EnumDone
2019-02-06 6:44 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).