messages from 2019-02-25 21:28:56 to 2019-03-05 22:05:03 UTC [more...]
USB: serial: ftdi_sio: add additional NovaTech products
2019-03-05 22:05 UTC
[v2,2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
2019-03-05 21:42 UTC
wusb: use correct format characters
2019-03-05 16:28 UTC
wusb: use correct format characters
2019-03-05 16:21 UTC
usbip: Remove unnecessary null check
2019-03-05 15:11 UTC
[v3,09/12] usb: dwc3: Registering a role switch in the DRD code
2019-03-05 13:22 UTC
MUSB interrupt storm on device removal
2019-03-05 11:30 UTC
usb: dwc2: Fix channel disable flow
2019-03-05 11:08 UTC
USB: gadget: f_hid: fix deadlock in f_hidg_write()
2019-03-05 10:10 UTC
[1/2] usb: chipiea: add flags for id and vbus from external block
2019-03-05 8:22 UTC
[v2,2/2] usb: typec: add typec switch via GPIO control
2019-03-05 7:10 UTC
[1/2] usb: chipiea: add flags for id and vbus from external block
2019-03-05 7:09 UTC
[v3,04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
2019-03-05 3:11 UTC
usb: introduce usb_ep_type_string() function
2019-03-05 2:22 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-05 1:42 UTC
[v5,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-03-05 1:19 UTC
[v2] USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX)
2019-03-05 1:16 UTC
[v3,04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
2019-03-04 23:53 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-04 18:31 UTC
[v5,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-03-04 17:42 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-04 15:53 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-04 15:15 UTC
usb: dwc2: Set lpm mode parameters depend on HW configuration
2019-03-04 13:08 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-04 12:46 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-04 11:01 UTC
[v2,8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-04 10:38 UTC
[v2,7/8] usb: dwc2: Add Amlogic G12A DWC2 Params
2019-03-04 10:38 UTC
[v2,6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
2019-03-04 10:38 UTC
[v2,5/8] phy: amlogic: add Amlogic G12A USB2 PHY Driver
2019-03-04 10:38 UTC
[v2,4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-03-04 10:38 UTC
[v2,3/8] dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible
2019-03-04 10:38 UTC
[v2,2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
2019-03-04 10:38 UTC
[v2,1/8] dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings
2019-03-04 10:38 UTC
[v4,6/6] usb:cdns3 Fix for stuck packets in on-chip OUT buffer
2019-03-04 10:25 UTC
[8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-04 9:33 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-04 9:23 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 7:31 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 6:58 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 6:55 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 6:50 UTC
[v3,06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller
2019-03-04 2:53 UTC
[v3,07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2019-03-04 2:37 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 2:35 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 1:55 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 1:47 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 1:27 UTC
USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
2019-03-04 1:24 UTC
usb: typec: pi3usb30532: Keep orientation when setting mux to safe mode
2019-03-04 1:14 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-03-03 21:16 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-03 20:17 UTC
[v2,2/2] usb: typec: add typec switch via GPIO control
2019-03-02 16:27 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-02 16:01 UTC
[v3,07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2019-03-02 15:56 UTC
[v3,06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller
2019-03-02 15:47 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-02 14:36 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-02 13:51 UTC
USB: serial: option: Add support for Quectel EM12
2019-03-02 12:35 UTC
[8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-02 10:29 UTC
[v3,12/12] dts: hi3660: Add support for usb on Hikey960
2019-03-02 9:05 UTC
[v3,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2019-03-02 9:05 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-02 9:05 UTC
[v3,09/12] usb: dwc3: Registering a role switch in the DRD code
2019-03-02 9:05 UTC
[v3,08/12] usb: roles: Add usb role switch notifier
2019-03-02 9:05 UTC
[v3,07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2019-03-02 9:05 UTC
[v3,06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller
2019-03-02 9:04 UTC
[v3,05/12] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc
2019-03-02 9:04 UTC
[v3,04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
2019-03-02 9:04 UTC
[v3,03/12] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform
2019-03-02 9:04 UTC
[v3,02/12] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
2019-03-02 9:04 UTC
[v3,01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
2019-03-02 9:04 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-02 8:00 UTC
[v2,08/10] hikey960: Support usb functionality of Hikey960
2019-03-02 1:02 UTC
wusb: Remove unnecessary static function ckhdid_printf
2019-03-01 19:54 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-01 19:44 UTC
usb: dwc2: suppress confusing warnings on BCM2835
2019-03-01 19:39 UTC
[net-next] drivers: net: Remove unnecessary semicolon
2019-03-01 19:08 UTC
wusb: Remove unnecessary static function ckhdid_printf
2019-03-01 18:18 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-01 17:22 UTC
[v2] usb: core: make default autosuspend delay configurable
2019-03-01 17:04 UTC
[v2] usb: core: make default autosuspend delay configurable
2019-03-01 16:43 UTC
dt-bindings: usb-xhci: Add r8a774c0 support
2019-03-01 16:36 UTC
usb: core: make default autosuspend delay configurable
2019-03-01 16:23 UTC
usb: introduce usb_ep_type_string() function
2019-03-01 16:21 UTC
dt-bindings: usb-xhci: Add r8a774c0 support
2019-03-01 16:16 UTC
soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-03-01 14:43 UTC
usb: core: make default autosuspend delay configurable
2019-03-01 14:26 UTC
dt-bindings: usb-xhci: Add r8a774c0 support
2019-03-01 11:25 UTC
wusb: Remove unnecessary static function ckhdid_printf
2019-03-01 11:15 UTC
[1/4] usb: common: Consider only available nodes for dr_mode
2019-03-01 11:05 UTC
[4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-03-01 10:25 UTC
usb: xhci: Support running urb giveback in tasklet context
2019-03-01 9:54 UTC
usb: xhci: Support running urb giveback in tasklet context
2019-03-01 9:15 UTC
usb: xhci: Support running urb giveback in tasklet context
2019-03-01 9:08 UTC
[net-next] drivers: net: Remove unnecessary semicolon
2019-03-01 8:09 UTC
usb: introduce usb_ep_type_string() function
2019-03-01 6:58 UTC
wusb: Remove unnecessary static function ckhdid_printf
2019-03-01 4:38 UTC
[1/2] usb: chipiea: add flags for id and vbus from external block
2019-03-01 3:03 UTC
soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-03-01 2:20 UTC
[v2,2/2] usb: typec: add typec switch via GPIO control
2019-03-01 1:25 UTC
[v2,1/2] dt-bindings: usb: add documentation for typec switch via GPIO
2019-03-01 1:25 UTC
[v2] wusb: use correct format characters
2019-03-01 0:03 UTC
[v2] wusb: use correct format characters
2019-02-28 23:05 UTC
[v2] wusb: use correct format characters
2019-02-28 22:23 UTC
[v2] wusb: use correct format characters
2019-02-28 21:53 UTC
[v2] wusb: use correct format characters
2019-02-28 19:19 UTC
[2/2] usb: hub: use non-removable-ports DT property
2019-02-28 18:45 UTC
[1/2] dt-bindings: usb: add non-removable-ports hub property
2019-02-28 18:45 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 18:06 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 17:34 UTC
xhci: use iopoll for xhci_handshake
2019-02-28 16:49 UTC
[4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-02-28 16:29 UTC
[3/8] dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible
2019-02-28 16:14 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 15:52 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 15:22 UTC
[1/8] dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings
2019-02-28 15:18 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 15:13 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 14:33 UTC
[v2] wusb: use correct format characters
2019-02-28 12:24 UTC
wusb: use correct format characters
2019-02-28 11:59 UTC
wusb: use correct format characters
2019-02-28 11:52 UTC
usb: musb: sunxi: propagate devicetree node to glue pdev
2019-02-28 11:20 UTC
usb: xhci: Support running urb giveback in tasklet context
2019-02-28 9:18 UTC
[2/2] usb: typec: add typec switch via GPIO control
2019-02-28 9:10 UTC
[2/2] usb: typec: add typec switch via GPIO control
2019-02-28 9:05 UTC
[1/2] usb: chipiea: add flags for id and vbus from external block
2019-02-28 8:58 UTC
xhci: use iopoll for xhci_handshake
2019-02-28 8:55 UTC
xhci: use iopoll for xhci_handshake
2019-02-28 7:09 UTC
xhci: use iopoll for xhci_handshake
2019-02-27 22:19 UTC
[v2] usb: core: Fix typo in description of "authorized_default"
2019-02-27 17:52 UTC
[1/2] dt-bindings: usb-xhci: Add usb-phy-port-reset property
2019-02-27 17:08 UTC
[3/3] usb: typec: altmodes/displayport: Notify drm subsys of hotplug events
2019-02-27 15:51 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-02-27 14:32 UTC
[1/3] udc: net2280: Fix net2280_disable
2019-02-27 13:26 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-02-27 13:13 UTC
[v3,5/5] usb: gadget: u_serial: diagnose missed console messages
2019-02-27 13:07 UTC
[v3,4/5] usb: gadget: u_serial: allow more console gadget ports
2019-02-27 13:07 UTC
[v3,3/5] usb: gadget: u_serial: make OBEX port not a console
2019-02-27 13:06 UTC
[v3,2/5] usb: gadget: u_serial: reimplement console support
2019-02-27 13:06 UTC
[v3,1/5] usb: gadget: u_serial: add missing port entry locking
2019-02-27 13:03 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-02-27 11:57 UTC
usb: core: Fix typo in description of "authorized_default"
2019-02-27 11:33 UTC
[v3,5/5] usb: gadget: u_serial: diagnose missed console messages
2019-02-27 10:46 UTC
[v3,4/5] usb: gadget: u_serial: allow more console gadget ports
2019-02-27 10:46 UTC
[v3,3/5] usb: gadget: u_serial: make OBEX port not a console
2019-02-27 10:46 UTC
[v3,2/5] usb: gadget: u_serial: reimplement console support
2019-02-27 10:46 UTC
[v3,1/5] usb: gadget: u_serial: add missing port entry locking
2019-02-27 10:46 UTC
[v2,3/5] usb: gadget: u_serial: make OBEX port not a console
2019-02-27 10:39 UTC
[v2,3/5] usb: gadget: u_serial: make OBEX port not a console
2019-02-27 10:14 UTC
[3/3] usb: typec: altmodes/displayport: Notify drm subsys of hotplug events
2019-02-27 9:44 UTC
[2/2] usb: typec: add typec switch via GPIO control
2019-02-27 9:40 UTC
[v2,5/5] usb: gadget: u_serial: diagnose missed console messages
2019-02-27 9:36 UTC
[v2,3/5] usb: gadget: u_serial: make OBEX port not a console
2019-02-27 9:36 UTC
[v2,1/5] usb: gadget: u_serial: add missing port entry locking
2019-02-27 9:34 UTC
[v2,5/5] usb: gadget: u_serial: diagnose missed console messages
2019-02-27 9:29 UTC
[v2,4/5] usb: gadget: u_serial: allow more console gadget ports
2019-02-27 9:29 UTC
[v2,3/5] usb: gadget: u_serial: make OBEX port not a console
2019-02-27 9:29 UTC
[v2,1/5] usb: gadget: u_serial: add missing port entry locking
2019-02-27 9:29 UTC
[v2,2/5] usb: gadget: u_serial: reimplement console support
2019-02-27 9:29 UTC
[1/5] usb: gadget: u_serial: add missing port entry locking
2019-02-27 8:59 UTC
usb: typec: pi3usb30532: Keep orientation when setting mux to safe mode
2019-02-27 8:50 UTC
usb: typec: altmodes/displayport: Fall back to multi-func pins
2019-02-27 8:50 UTC
[2/5] usb: gadget: u_serial: reimplement console support
2019-02-27 8:48 UTC
[5/5] usb: gadget: u_serial: diagnose missed console messages
2019-02-27 8:47 UTC
[3/5] usb: gadget: u_serial: make OBEX port not a console
2019-02-27 8:46 UTC
[1/5] usb: gadget: u_serial: add missing port entry locking
2019-02-27 8:41 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-02-27 8:33 UTC
[4/5] usb: gadget: u_serial: allow more console gadget ports
2019-02-27 7:48 UTC
[5/5] usb: gadget: u_serial: diagnose missed console messages
2019-02-27 7:48 UTC
[3/5] usb: gadget: u_serial: make OBEX port not a console
2019-02-27 7:48 UTC
[2/5] usb: gadget: u_serial: reimplement console support
2019-02-27 7:48 UTC
[1/5] usb: gadget: u_serial: add missing port entry locking
2019-02-27 7:48 UTC
[5/5] usb: chipidea: Refactor USB PHY selection and keep a single PHY
2019-02-27 6:51 UTC
[4/5] usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-02-27 6:51 UTC
[3/5] usb: chipidea: imx: set power polarity
2019-02-27 6:51 UTC
[2/5] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
2019-02-27 6:51 UTC
[1/5] usb: chipidea: imx: remove unused header files
2019-02-27 6:51 UTC
[v3,1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-02-27 2:35 UTC
[1/2] dt-bindings: usb-xhci: Add usb-phy-port-reset property
2019-02-26 18:02 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-02-26 17:07 UTC
[v3,1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-02-26 16:39 UTC
[3/3] usb: typec: altmodes/displayport: Notify drm subsys of hotplug events
2019-02-26 16:04 UTC
[v1] usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
2019-02-26 15:40 UTC
[v1] usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
2019-02-26 15:21 UTC
[v1] usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
2019-02-26 15:08 UTC
[v1] usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
2019-02-26 14:58 UTC
[v1] usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
2019-02-26 14:33 UTC
[v1] usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
2019-02-26 10:56 UTC
usb: host: xhci-rcar: Add XHCI_TRUST_TX_LENGTH quirk
2019-02-26 8:47 UTC
[3/3] usb: typec: altmodes/displayport: Notify drm subsys of hotplug events
2019-02-26 7:40 UTC
[2/2] usb: typec: add typec switch via GPIO control
2019-02-26 7:25 UTC
[7/8] usb: gadget: Add UDC driver for tegra XUSB device mode controller
2019-02-26 7:01 UTC
[v3,2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot
2019-02-26 6:59 UTC
[v3,1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
2019-02-26 6:59 UTC
[1/2] usb: chipiea: add flags for id and vbus from external block
2019-02-26 6:52 UTC
[v2,2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot
2019-02-26 5:42 UTC
[1/2] dt-bindings: usb-xhci: Add usb-phy-port-reset property
2019-02-26 4:57 UTC
usb: ehci: Cleanup itd/sidt_complete()
2019-02-26 3:17 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-02-25 22:11 UTC
[1/2] dt-bindings: usb-xhci: Add usb-phy-port-reset property
2019-02-25 21:38 UTC
[v2,2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot
2019-02-25 21:28 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).