messages from 2019-02-27 17:52:39 to 2019-03-08 10:58:32 UTC [more...]
[v2,2/8] usb: typec: fusb302: Refactor / simplify tcpm_set_cc()
2019-03-08 10:58 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-08 9:13 UTC
[v2,2/8] usb: typec: fusb302: Refactor / simplify tcpm_set_cc()
2019-03-08 7:33 UTC
[3/5] usb: roles: add API to get usb_role_switch by node
2019-03-08 6:52 UTC
[5/5] usb: mtu3: register a USB Role Switch for Dual-Role mode
2019-03-08 6:13 UTC
[4/5] usb: roles: add USB Type-B connector driver
2019-03-08 6:13 UTC
[3/5] usb: roles: add API to get usb_role_switch by node
2019-03-08 6:13 UTC
[2/5] dt-bindings: usb: mtu3: add properties about USB Role Switch
2019-03-08 6:13 UTC
[1/5] dt-bindings: connector: add optional properties for Type-B
2019-03-08 6:13 UTC
[v2,8/8] usb: typec: fusb302: Add __printf attribute to fusb302_log function
2019-03-07 18:26 UTC
[v2,7/8] usb: typec: fusb302: Improve suspend/resume handling
2019-03-07 18:26 UTC
[v2,6/8] usb: typec: fusb302: 2 small misc. fixes
2019-03-07 18:20 UTC
[v2,5/8] usb: typec: fusb302: Fix fusb302_handle_togdone_src Ra handling
2019-03-07 18:19 UTC
[v2,3/8] usb: typec: fusb302: Fold fusb302_set_cc_pull into tcpm_set_cc
2019-03-07 18:14 UTC
[v2,2/8] usb: typec: fusb302: Refactor / simplify tcpm_set_cc()
2019-03-07 18:12 UTC
[v2,4/8] usb: typec: fusb302: Check vconn is off when we start toggling
2019-03-07 18:11 UTC
[v2,1/8] usb: typec: fusb302: Make fusb302_set_cc_polarity also set pull ups / downs
2019-03-07 18:06 UTC
[v2,8/8] usb: typec: fusb302: Add __printf attribute to fusb302_log function
2019-03-07 16:36 UTC
[v2,7/8] usb: typec: fusb302: Improve suspend/resume handling
2019-03-07 16:36 UTC
[v2,6/8] usb: typec: fusb302: 2 small misc. fixes
2019-03-07 16:36 UTC
[v2,5/8] usb: typec: fusb302: Fix fusb302_handle_togdone_src Ra handling
2019-03-07 16:36 UTC
[v2,4/8] usb: typec: fusb302: Check vconn is off when we start toggling
2019-03-07 16:36 UTC
[v2,3/8] usb: typec: fusb302: Fold fusb302_set_cc_pull into tcpm_set_cc
2019-03-07 16:36 UTC
[v2,2/8] usb: typec: fusb302: Refactor / simplify tcpm_set_cc()
2019-03-07 16:36 UTC
[v2,1/8] usb: typec: fusb302: Make fusb302_set_cc_polarity also set pull ups / downs
2019-03-07 16:36 UTC
MUSB interrupt storm on device removal
2019-03-07 16:16 UTC
[1/3] udc: net2280: Fix net2280_disable
2019-03-07 16:11 UTC
[4/9] usb: gadget: udc: renesas_usb3: use extcon framework to receive connect/disconnect
2019-03-07 16:02 UTC
[3/9] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
2019-03-07 15:57 UTC
[v2,8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-07 11:01 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-07 9:52 UTC
[v2,8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-07 9:45 UTC
[v4,6/6] usb:cdns3 Fix for stuck packets in on-chip OUT buffer
2019-03-07 9:13 UTC
[v2,6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
2019-03-07 8:44 UTC
[v2,5/8] phy: amlogic: add Amlogic G12A USB2 PHY Driver
2019-03-07 8:41 UTC
[v2,4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-03-07 8:36 UTC
[v2,2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
2019-03-07 8:35 UTC
[v4,6/6] usb:cdns3 Fix for stuck packets in on-chip OUT buffer
2019-03-07 7:06 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-07 5:37 UTC
[v2,8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-07 2:02 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-06 21:47 UTC
[v2] drivers: uwb: Kconfig: pedantic cleanups
2019-03-06 21:43 UTC
[v2,4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-03-06 21:27 UTC
dt-bindings: usb: dwc2: document the vbus-supply property
2019-03-06 21:24 UTC
[v2,6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
2019-03-06 21:04 UTC
[v2,5/8] phy: amlogic: add Amlogic G12A USB2 PHY Driver
2019-03-06 21:00 UTC
drivers: uwb: Kconfig: pedantic cleanups
2019-03-06 19:26 UTC
drivers: uwb: Kconfig: pedantic cleanups
2019-03-06 18:51 UTC
usbip: Remove unnecessary null check
2019-03-06 15:11 UTC
[4/9] usb: gadget: udc: renesas_usb3: use extcon framework to receive connect/disconnect
2019-03-06 12:43 UTC
[11/11] usb: mtu3: add a function to switch mailbox state to string
2019-03-06 11:46 UTC
[10/11] usb: mtu3: add tracepoints to help debug
2019-03-06 11:46 UTC
[09/11] usb: mtu3: move vbus and mode debugfs interfaces into mtu3_debugfs.c
2019-03-06 11:46 UTC
[08/11] usb: mtu3: add debugfs interface files
2019-03-06 11:46 UTC
[07/11] usb: mtu3: supports new QMU format
2019-03-06 11:46 UTC
[06/11] usb: mtu3: rebuild qmu_gpd struct to prepare to support new QMU format
2019-03-06 11:46 UTC
[05/11] usb: mtu3: fix transfer error of USB3 Gen2 isoc
2019-03-06 11:46 UTC
[04/11] usb: mtu3: rebuild the code of getting vbus regulator
2019-03-06 11:46 UTC
[03/11] usb: mtu3: remove unnecessary local variable @req
2019-03-06 11:46 UTC
[02/11] usb: mtu3: print useful information also for device and host modes
2019-03-06 11:46 UTC
[01/11] usb: mtu3: check return value of devm_extcon_register_notifier()
2019-03-06 11:46 UTC
[3/9] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
2019-03-06 11:34 UTC
[5/9] arm64: defconfig: enable TYPEC_HD3SS3220 config option
2019-03-06 9:07 UTC
[4/9] usb: gadget: udc: renesas_usb3: use extcon framework to receive connect/disconnect
2019-03-06 9:07 UTC
[3/9] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
2019-03-06 9:07 UTC
[2/9] dt-bindings: usb: renesas_usb3: add extcon support
2019-03-06 9:07 UTC
[1/9] dt-bindings: usb: hd3ss3220 device tree binding document
2019-03-06 9:07 UTC
Configuring host_addr and device_addr for u_ether
2019-03-06 8:48 UTC
[v2] USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX)
2019-03-06 5:25 UTC
[v2] USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX)
2019-03-06 4:42 UTC
[-next] usb: gadget: Remove dead branch code
2019-03-06 0:46 UTC
USB: serial: ftdi_sio: add additional NovaTech products
2019-03-05 22:05 UTC
[v2,2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
2019-03-05 21:42 UTC
wusb: use correct format characters
2019-03-05 16:28 UTC
wusb: use correct format characters
2019-03-05 16:21 UTC
usbip: Remove unnecessary null check
2019-03-05 15:11 UTC
[v3,09/12] usb: dwc3: Registering a role switch in the DRD code
2019-03-05 13:22 UTC
MUSB interrupt storm on device removal
2019-03-05 11:30 UTC
usb: dwc2: Fix channel disable flow
2019-03-05 11:08 UTC
USB: gadget: f_hid: fix deadlock in f_hidg_write()
2019-03-05 10:10 UTC
[1/2] usb: chipiea: add flags for id and vbus from external block
2019-03-05 8:22 UTC
[v2,2/2] usb: typec: add typec switch via GPIO control
2019-03-05 7:10 UTC
[1/2] usb: chipiea: add flags for id and vbus from external block
2019-03-05 7:09 UTC
[v3,04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
2019-03-05 3:11 UTC
usb: introduce usb_ep_type_string() function
2019-03-05 2:22 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-05 1:42 UTC
[v5,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-03-05 1:19 UTC
[v2] USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX)
2019-03-05 1:16 UTC
[v3,04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
2019-03-04 23:53 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-04 18:31 UTC
[v5,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
2019-03-04 17:42 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-04 15:53 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-04 15:15 UTC
usb: dwc2: Set lpm mode parameters depend on HW configuration
2019-03-04 13:08 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-04 12:46 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-04 11:01 UTC
[v2,8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-04 10:38 UTC
[v2,7/8] usb: dwc2: Add Amlogic G12A DWC2 Params
2019-03-04 10:38 UTC
[v2,6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
2019-03-04 10:38 UTC
[v2,5/8] phy: amlogic: add Amlogic G12A USB2 PHY Driver
2019-03-04 10:38 UTC
[v2,4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-03-04 10:38 UTC
[v2,3/8] dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible
2019-03-04 10:38 UTC
[v2,2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
2019-03-04 10:38 UTC
[v2,1/8] dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings
2019-03-04 10:38 UTC
[v4,6/6] usb:cdns3 Fix for stuck packets in on-chip OUT buffer
2019-03-04 10:25 UTC
[8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-04 9:33 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-04 9:23 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 7:31 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 6:58 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 6:55 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 6:50 UTC
[v3,06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller
2019-03-04 2:53 UTC
[v3,07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2019-03-04 2:37 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 2:35 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 1:55 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 1:47 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-04 1:27 UTC
USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
2019-03-04 1:24 UTC
usb: typec: pi3usb30532: Keep orientation when setting mux to safe mode
2019-03-04 1:14 UTC
[BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+
2019-03-03 21:16 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-03 20:17 UTC
[v2,2/2] usb: typec: add typec switch via GPIO control
2019-03-02 16:27 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-02 16:01 UTC
[v3,07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2019-03-02 15:56 UTC
[v3,06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller
2019-03-02 15:47 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-02 14:36 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-02 13:51 UTC
USB: serial: option: Add support for Quectel EM12
2019-03-02 12:35 UTC
[8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-02 10:29 UTC
[v3,12/12] dts: hi3660: Add support for usb on Hikey960
2019-03-02 9:05 UTC
[v3,11/12] usb: gadget: Add configfs attribuite for controling match_existing_only
2019-03-02 9:05 UTC
[v3,10/12] hikey960: Support usb functionality of Hikey960
2019-03-02 9:05 UTC
[v3,09/12] usb: dwc3: Registering a role switch in the DRD code
2019-03-02 9:05 UTC
[v3,08/12] usb: roles: Add usb role switch notifier
2019-03-02 9:05 UTC
[v3,07/12] phy: Add usb phy support for hi3660 Soc of Hisilicon
2019-03-02 9:05 UTC
[v3,06/12] usb: dwc3: Increase timeout for CmdAct cleared by device controller
2019-03-02 9:04 UTC
[v3,05/12] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc
2019-03-02 9:04 UTC
[v3,04/12] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
2019-03-02 9:04 UTC
[v3,03/12] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform
2019-03-02 9:04 UTC
[v3,02/12] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
2019-03-02 9:04 UTC
[v3,01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
2019-03-02 9:04 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-02 8:00 UTC
[v2,08/10] hikey960: Support usb functionality of Hikey960
2019-03-02 1:02 UTC
wusb: Remove unnecessary static function ckhdid_printf
2019-03-01 19:54 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-01 19:44 UTC
usb: dwc2: suppress confusing warnings on BCM2835
2019-03-01 19:39 UTC
[net-next] drivers: net: Remove unnecessary semicolon
2019-03-01 19:08 UTC
wusb: Remove unnecessary static function ckhdid_printf
2019-03-01 18:18 UTC
USB: usb.h: tweak struct urb to remove wasted space
2019-03-01 17:22 UTC
[v2] usb: core: make default autosuspend delay configurable
2019-03-01 17:04 UTC
[v2] usb: core: make default autosuspend delay configurable
2019-03-01 16:43 UTC
dt-bindings: usb-xhci: Add r8a774c0 support
2019-03-01 16:36 UTC
usb: core: make default autosuspend delay configurable
2019-03-01 16:23 UTC
usb: introduce usb_ep_type_string() function
2019-03-01 16:21 UTC
dt-bindings: usb-xhci: Add r8a774c0 support
2019-03-01 16:16 UTC
soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-03-01 14:43 UTC
usb: core: make default autosuspend delay configurable
2019-03-01 14:26 UTC
dt-bindings: usb-xhci: Add r8a774c0 support
2019-03-01 11:25 UTC
wusb: Remove unnecessary static function ckhdid_printf
2019-03-01 11:15 UTC
[1/4] usb: common: Consider only available nodes for dr_mode
2019-03-01 11:05 UTC
[4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-03-01 10:25 UTC
usb: xhci: Support running urb giveback in tasklet context
2019-03-01 9:54 UTC
usb: xhci: Support running urb giveback in tasklet context
2019-03-01 9:15 UTC
usb: xhci: Support running urb giveback in tasklet context
2019-03-01 9:08 UTC
[net-next] drivers: net: Remove unnecessary semicolon
2019-03-01 8:09 UTC
usb: introduce usb_ep_type_string() function
2019-03-01 6:58 UTC
wusb: Remove unnecessary static function ckhdid_printf
2019-03-01 4:38 UTC
[1/2] usb: chipiea: add flags for id and vbus from external block
2019-03-01 3:03 UTC
soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-03-01 2:20 UTC
[v2,2/2] usb: typec: add typec switch via GPIO control
2019-03-01 1:25 UTC
[v2,1/2] dt-bindings: usb: add documentation for typec switch via GPIO
2019-03-01 1:25 UTC
[v2] wusb: use correct format characters
2019-03-01 0:03 UTC
[v2] wusb: use correct format characters
2019-02-28 23:05 UTC
[v2] wusb: use correct format characters
2019-02-28 22:23 UTC
[v2] wusb: use correct format characters
2019-02-28 21:53 UTC
[v2] wusb: use correct format characters
2019-02-28 19:19 UTC
[2/2] usb: hub: use non-removable-ports DT property
2019-02-28 18:45 UTC
[1/2] dt-bindings: usb: add non-removable-ports hub property
2019-02-28 18:45 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 18:06 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 17:34 UTC
xhci: use iopoll for xhci_handshake
2019-02-28 16:49 UTC
[4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-02-28 16:29 UTC
[3/8] dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible
2019-02-28 16:14 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 15:52 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 15:22 UTC
[1/8] dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings
2019-02-28 15:18 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 15:13 UTC
[RFC] dt-bindings: usb: add non-removable device property
2019-02-28 14:33 UTC
[v2] wusb: use correct format characters
2019-02-28 12:24 UTC
wusb: use correct format characters
2019-02-28 11:59 UTC
wusb: use correct format characters
2019-02-28 11:52 UTC
usb: musb: sunxi: propagate devicetree node to glue pdev
2019-02-28 11:20 UTC
usb: xhci: Support running urb giveback in tasklet context
2019-02-28 9:18 UTC
[2/2] usb: typec: add typec switch via GPIO control
2019-02-28 9:10 UTC
[2/2] usb: typec: add typec switch via GPIO control
2019-02-28 9:05 UTC
[1/2] usb: chipiea: add flags for id and vbus from external block
2019-02-28 8:58 UTC
xhci: use iopoll for xhci_handshake
2019-02-28 8:55 UTC
xhci: use iopoll for xhci_handshake
2019-02-28 7:09 UTC
xhci: use iopoll for xhci_handshake
2019-02-27 22:19 UTC
[v2] usb: core: Fix typo in description of "authorized_default"
2019-02-27 17:52 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).