messages from 2019-03-19 08:18:01 to 2019-03-25 13:54:30 UTC [more...]
usb: mtu3: fix EXTCON dependency
2019-03-25 13:54 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-25 10:34 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-25 10:21 UTC
[v5,8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-25 9:39 UTC
[v5,7/8] usb: dwc2: Add Amlogic G12A DWC2 Params
2019-03-25 9:39 UTC
[v5,6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
2019-03-25 9:39 UTC
[v5,5/8] phy: amlogic: add Amlogic G12A USB2 PHY Driver
2019-03-25 9:39 UTC
[v5,4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-03-25 9:39 UTC
[v5,3/8] dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible
2019-03-25 9:39 UTC
[v5,2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
2019-03-25 9:39 UTC
[v5,1/8] dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings
2019-03-25 9:39 UTC
[v2] usb: sierra: fix a missing check of device_create_file
2019-03-25 3:08 UTC
usb: sierra: fix a missing check of device_create_file
2019-03-25 2:47 UTC
usb: musb: omap2430: Add support for idling phy when musb is idle
2019-03-24 23:34 UTC
phy: phy-twl4030-usb: Fix cable state handling
2019-03-24 23:26 UTC
usb: sierra: fix a missing check of device_create_file
2019-03-24 22:39 UTC
usb: core: Add PM runtime calls to usb_hcd_platform_shutdown
2019-03-23 15:22 UTC
usb: dwc3: Softdep for GBit Ethernet on Odroid XU4
2019-03-23 6:05 UTC
usb: core: Add PM runtime calls to usb_hcd_platform_shutdown
2019-03-22 21:54 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 21:01 UTC
usb: dwc3: Softdep for GBit Ethernet on Odroid XU4
2019-03-22 20:41 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 20:41 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 20:03 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 19:30 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 18:37 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 18:11 UTC
usb: cdc-acm: fix race during wakeup blocking TX traffic
2019-03-22 15:53 UTC
[3/3] xhci: Don't let USB3 ports stuck in polling state prevent suspend
2019-03-22 15:50 UTC
[2/3] usb: xhci: dbc: Don't free all memory with spinlock held
2019-03-22 15:50 UTC
[1/3] xhci: Fix port resume done detection for SS ports with LPM enabled
2019-03-22 15:50 UTC
[BACKPORT,4.4.y,25/25] USB: core: only clean up what we allocated
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,22/25] usb: renesas_usbhs: gadget: fix unused-but-set-variable warning
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,16/25] usb: gadget: Add the gserial port checking in gs_start_tx()
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,15/25] usb: gadget: composite: fix dereference after null check coverify warning
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,09/25] usb: dwc3: gadget: Fix suspend/resume during device mode
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,04/25] USB: iowarrior: fix oops with malicious USB descriptors
2019-03-22 15:43 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 14:04 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:46 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:46 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:44 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:37 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:36 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:34 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:28 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:10 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:09 UTC
[2/2] usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
2019-03-22 12:56 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 12:46 UTC
[v2] usb: typec: tcpm: collision avoidance
2019-03-22 12:17 UTC
usb: typec: tcpm: collision avoidance
2019-03-22 11:54 UTC
[2/2] usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
2019-03-22 8:51 UTC
[1/2] phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
2019-03-22 8:51 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-22 8:38 UTC
[v3] usb: gadget: f_fs: don't free buffer prematurely
2019-03-22 6:12 UTC
[v4] usb: gadget: f_fs: don't free buffer prematurely
2019-03-22 6:07 UTC
usb: dwc3: Softdep for GBit Ethernet on Odroid XU4
2019-03-22 5:37 UTC
[v3] usb: gadget: f_fs: don't free buffer prematurely
2019-03-22 5:36 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-22 0:59 UTC
[v3] usb: gadget: f_fs: don't free buffer prematurely
2019-03-21 21:31 UTC
usb: dwc3: Softdep for GBit Ethernet on Odroid XU4
2019-03-21 20:23 UTC
dt-bindings: usb: dwc2: document the vbus-supply property
2019-03-21 19:21 UTC
usb: typec: tcpm: collision avoidance
2019-03-21 16:51 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-21 16:41 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-21 16:02 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-21 15:40 UTC
[3/3] usb: musb: jz4740: obtain USB PHY from devicetree
2019-03-21 15:09 UTC
[2/3] usb: musb: jz4740: Let the platform probe the PHY
2019-03-21 15:09 UTC
[1/3] dt-bindings: usb: Add usb-phy property to the jz4740-musb node
2019-03-21 15:09 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-21 14:54 UTC
usb: musb: Force-disable pullup on shutdown
2019-03-21 14:42 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-21 13:32 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-21 13:24 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-21 13:01 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 11:25 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 10:03 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 9:59 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 9:50 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 9:47 UTC
usb: gadget: Don't allocate zero-length buffers
2019-03-21 7:42 UTC
[RESEND,11/11] usb: mtu3: add a function to switch mailbox state to string
2019-03-21 2:53 UTC
[RESEND,10/11] usb: mtu3: add tracepoints to help debug
2019-03-21 2:53 UTC
[RESEND,09/11] usb: mtu3: move vbus and mode debugfs interfaces into mtu3_debugfs.c
2019-03-21 2:53 UTC
[RESEND,08/11] usb: mtu3: add debugfs interface files
2019-03-21 2:53 UTC
[RESEND,07/11] usb: mtu3: supports new QMU format
2019-03-21 2:53 UTC
[RESEND,06/11] usb: mtu3: rebuild qmu_gpd struct to prepare to support new QMU format
2019-03-21 2:53 UTC
[RESEND,05/11] usb: mtu3: fix transfer error of USB3 Gen2 isoc
2019-03-21 2:53 UTC
[RESEND,04/11] usb: mtu3: rebuild the code of getting vbus regulator
2019-03-21 2:53 UTC
[RESEND,03/11] usb: mtu3: remove unnecessary local variable @req
2019-03-21 2:53 UTC
[RESEND,02/11] usb: mtu3: print useful information also for device and host modes
2019-03-21 2:53 UTC
[RESEND,01/11] usb: mtu3: check return value of devm_extcon_register_notifier()
2019-03-21 2:53 UTC
[v3] usb: introduce usb_ep_type_string() function
2019-03-21 2:27 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 23:42 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 23:28 UTC
[-next] usb: typec: fusb302: Make fusb302_irq_work static
2019-03-20 19:51 UTC
[-next] usb: typec: fusb302: Make fusb302_irq_work static
2019-03-20 19:25 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 18:21 UTC
usb: dwc3: Enable GBit Ethernet on Odroid XU4
2019-03-20 18:12 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 17:30 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 16:55 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 16:52 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 16:40 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-20 16:34 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-20 16:07 UTC
[v3] usb: usb251xb: fix to avoid potential NULL pointer dereference
2019-03-20 15:27 UTC
[-next] usb: typec: fusb302: Make fusb302_irq_work static
2019-03-20 15:02 UTC
[-next] usb: typec: fusb302: Make fusb302_irq_work static
2019-03-20 14:58 UTC
usb: gadget: Don't allocate zero-length buffers
2019-03-20 14:25 UTC
USB: serial: option: Add support for Quectel EM12
2019-03-20 14:19 UTC
[-next] usb: typec: fusb302: Make fusb302_irq_work static
2019-03-20 14:12 UTC
[RFC] xhci: clear port_remote_wakeup on device disconnection
2019-03-20 13:55 UTC
[v2] USB: serial: mos7720: fix mos_parport refcount imbalance on error path
2019-03-20 13:18 UTC
usb: gadget: Don't allocate zero-length buffers
2019-03-20 12:56 UTC
[v2,2/2] usb: typec: ucsi: Support for DisplayPort alt mode
2019-03-20 11:44 UTC
[v2,1/2] usb: typec: ucsi: Preliminary support for alternate modes
2019-03-20 11:44 UTC
[v2] USB: serial: mos7720: fix mos_parport refcount imbalance on error path
2019-03-20 11:04 UTC
[2/5] reset: Add acquired flag to of_reset_control_array_get()
2019-03-20 10:27 UTC
[v2] usb: usb251xb: fix to avoid potential NULL pointer dereference
2019-03-20 10:00 UTC
[v2] USB: serial: cp210x: Fix GPIO in autosuspend
2019-03-20 9:11 UTC
usb-serial: fix mos_parport refcount imbalance on error path
2019-03-20 9:05 UTC
usb-serial: fix mos_parport refcount imbalance on error path
2019-03-20 9:04 UTC
USB: gadget: f_hid: fix deadlock in f_hidg_write()
2019-03-20 8:59 UTC
usb-serial: fix mos_parport refcount imbalance on error path
2019-03-20 8:59 UTC
[v2] USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX)
2019-03-20 8:43 UTC
[31/38] vfs: Convert gadgetfs to fs_context
2019-03-20 8:34 UTC
[v2] usb: introduce usb_ep_type_string() function
2019-03-20 7:49 UTC
[31/38] vfs: Convert gadgetfs to fs_context
2019-03-20 7:42 UTC
[31/38] vfs: Convert gadgetfs to fs_context
2019-03-20 6:57 UTC
[v2] usb: introduce usb_ep_type_string() function
2019-03-20 6:55 UTC
[2/5] reset: Add acquired flag to of_reset_control_array_get()
2019-03-20 6:51 UTC
usb: dwc3: pci: add support for Comet Lake PCH ID
2019-03-20 6:48 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 5:59 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 5:56 UTC
usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 5:38 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 5:32 UTC
usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 3:31 UTC
[v2] USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX)
2019-03-20 2:43 UTC
usb-serial: fix mos_parport refcount imbalance on error path
2019-03-20 2:29 UTC
[v3,8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-20 1:43 UTC
[v2] usb: introduce usb_ep_type_string() function
2019-03-20 1:16 UTC
usb: gadget: f_fs: don't free buffer prematurely
2019-03-20 0:09 UTC
usb: gadget: f_fs: don't free buffer prematurely
2019-03-19 23:41 UTC
usb: gadget: f_fs: don't free buffer prematurely
2019-03-19 23:25 UTC
[v2] usb: usb251xb: fix to avoid potential NULL pointer dereference
2019-03-19 20:26 UTC
[v2,3/3] usb: gadget: net2272: Fix net2272_dequeue()
2019-03-19 18:36 UTC
[v3] usb: gadget: net2280: Fix overrun of OUT messages
2019-03-19 18:12 UTC
[v2,3/3] usb: gadget: net2272: Fix net2272_dequeue()
2019-03-19 17:54 UTC
usb: typec: tcpm: collision avoidance
2019-03-19 17:38 UTC
usb: u132-hcd: fix potential NULL pointer dereference
2019-03-19 17:34 UTC
[v3] usb: gadget: net2280: Fix overrun of OUT messages
2019-03-19 17:24 UTC
usb: u132-hcd: fix potential NULL pointer dereference
2019-03-19 17:20 UTC
[v2] USB: serial: cp210x: Fix GPIO in autosuspend
2019-03-19 17:19 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 17:15 UTC
[v2] USB: serial: cp210x: Fix GPIO in autosuspend
2019-03-19 17:12 UTC
[2/5] reset: Add acquired flag to of_reset_control_array_get()
2019-03-19 16:37 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 16:26 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 14:59 UTC
[RFC] xhci: clear port_remote_wakeup on device disconnection
2019-03-19 14:54 UTC
usb: typec: wcove: Provide fwnode for the port
2019-03-19 14:51 UTC
[v2,1/3] usb: gadget: net2280: Fix overrun of OUT messages
2019-03-19 14:37 UTC
[3/4] usb: Convert usb_bus_idr to XArray
2019-03-19 14:37 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 14:35 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 14:30 UTC
[v2,1/3] usb: gadget: net2280: Fix overrun of OUT messages
2019-03-19 14:22 UTC
usb: u132-hcd: fix potential NULL pointer dereference
2019-03-19 13:56 UTC
usb: musb: Silence error about blacklisting hubs if !CONFIG_USB
2019-03-19 13:51 UTC
[v5,2/2] usb: typec: ucsi: add firmware flashing support
2019-03-19 13:43 UTC
[v5,1/2] usb: typec: ucsi: add get_fw_info function
2019-03-19 13:42 UTC
usb: typec: pi3usb30532: Keep orientation when setting mux to safe mode
2019-03-19 13:38 UTC
[v2] usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps
2019-03-19 13:36 UTC
[2/4] cdc-acm: Convert acm_minors to XArray
2019-03-19 13:29 UTC
[v2] USB: serial: cp210x: Fix GPIO in autosuspend
2019-03-19 13:14 UTC
usb: usb251xb: fix to avoid potential NULL pointer dereference
2019-03-19 13:11 UTC
usb: typec: wcove: Provide fwnode for the port
2019-03-19 12:53 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 12:43 UTC
[2/4] cdc-acm: Convert acm_minors to XArray
2019-03-19 12:41 UTC
[2/4] cdc-acm: Convert acm_minors to XArray
2019-03-19 12:39 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 12:27 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 12:25 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-19 12:18 UTC
[1/4] usb: Convert xhci-mem to XArray
2019-03-19 12:16 UTC
[2/4] cdc-acm: Convert acm_minors to XArray
2019-03-19 12:14 UTC
[4/4] usb/serial: Convert serial_minors to XArray
2019-03-19 12:11 UTC
[v4,08/12] usb: roles: Add usb role switch notifier
2019-03-19 12:07 UTC
[v4,08/12] usb: roles: Add usb role switch notifier
2019-03-19 11:56 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-19 11:45 UTC
[4/4] usb/serial: Convert serial_minors to XArray
2019-03-19 11:36 UTC
[4/4] usb/serial: Convert serial_minors to XArray
2019-03-19 11:35 UTC
[v2] USB: serial: cp210x: Fix GPIO in autosuspend
2019-03-19 11:15 UTC
usb: typec: Fix unchecked return value
2019-03-19 11:13 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 11:08 UTC
[RFC] xhci: clear port_remote_wakeup on device disconnection
2019-03-19 11:01 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 10:54 UTC
[v2] USB: serial: cp210x: Fix GPIO in autosuspend
2019-03-19 10:36 UTC
USB: serial: option: set driver_info for SIM5218 and compatibles
2019-03-19 10:28 UTC
USB: serial: ftdi_sio: add additional NovaTech products
2019-03-19 9:36 UTC
usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0
2019-03-19 9:33 UTC
USB: serial: option: Add support for Quectel EM12
2019-03-19 9:26 UTC
[v2] usb: introduce usb_ep_type_string() function
2019-03-19 9:23 UTC
usb: gadget: composite: Fix double free memory bug
2019-03-19 9:03 UTC
[v3,1/2] dt-bindings: usb: add documentation for typec switch via GPIO
2019-03-19 8:18 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).