messages from 2019-03-21 02:53:44 to 2019-03-30 15:02:37 UTC [more...]
usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping
2019-03-30 15:02 UTC
usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping
2019-03-30 12:53 UTC
[next] usb: mtu3: get optional clock by devm_clk_get_optional()
2019-03-30 9:40 UTC
[5/5] usb: chipidea: msm: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[4/5] usb: dwc2: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[3/5] usb: misc: usb3503: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[2/5] usb: host: xhci-plat: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[1/5] usb: xhci-mtk: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[v5,6/6] usb: musb: Add support for MediaTek musb controller
2019-03-30 8:52 UTC
usb: gadget: Don't allocate zero-length buffers
2019-03-29 19:54 UTC
usb: dwc2: gadget: add scatter-gather mode
2019-03-29 15:17 UTC
usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping
2019-03-29 15:16 UTC
usb: typec: mux: Store module handle
2019-03-29 15:05 UTC
[V3,1/3] USB: serial: f81232: clear overrun flag
2019-03-29 14:40 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-29 14:13 UTC
usb: dwc2: gadget: add scatter-gather mode
2019-03-29 14:05 UTC
[v2,2/7] dt-bindings: usb: renesas_usb3: add usb-role-switch property
2019-03-29 13:57 UTC
[v2,6/6] usb: ohci-da8xx: drop the vbus GPIO
2019-03-29 9:33 UTC
[v2,5/6] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx
2019-03-29 9:33 UTC
[v2,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
2019-03-29 9:33 UTC
[v2,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
2019-03-29 9:33 UTC
[v2,2/6] usb: ohci-da8xx: let the regulator framework keep track of use count
2019-03-29 9:33 UTC
[v2,1/6] ARM: davinci: add missing sentinels to GPIO lookup tables
2019-03-29 9:33 UTC
[V3,3/3] USB: serial: f81232: implement break control
2019-03-29 8:28 UTC
[V3,2/3] USB: serial: f81232: add high baud rate support
2019-03-29 8:28 UTC
[V3,1/3] USB: serial: f81232: clear overrun flag
2019-03-29 8:28 UTC
[v5,13/13] dts: hi3660: Add support for usb on Hikey960
2019-03-29 4:14 UTC
[v5,12/13] usb: gadget: Add configfs attribuite for controling match_existing_only
2019-03-29 4:14 UTC
[v5,11/13] hikey960: Support usb functionality of Hikey960
2019-03-29 4:14 UTC
[v5,10/13] usb: dwc3: Registering a role switch in the DRD code
2019-03-29 4:14 UTC
[v5,09/13] usb: roles: Add usb role switch notifier
2019-03-29 4:14 UTC
[v5,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
2019-03-29 4:14 UTC
[v5,07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon
2019-03-29 4:14 UTC
[v5,06/13] usb: dwc3: Increase timeout for CmdAct cleared by device controller
2019-03-29 4:14 UTC
[v5,05/13] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc
2019-03-29 4:14 UTC
[v5,04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
2019-03-29 4:14 UTC
[v5,03/13] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform
2019-03-29 4:13 UTC
[v5,02/13] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
2019-03-29 4:13 UTC
[v5,01/13] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
2019-03-29 4:13 UTC
dt-bindings: usb: dwc2: document the vbus-supply property
2019-03-28 20:00 UTC
[v2,2/7] dt-bindings: usb: renesas_usb3: add usb-role-switch property
2019-03-28 17:48 UTC
[v4,01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
2019-03-28 17:11 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-28 16:49 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-28 15:57 UTC
[v2,1/7] dt-bindings: usb: hd3ss3220 device tree binding document
2019-03-28 15:35 UTC
[v2,2/7] dt-bindings: usb: renesas_usb3: add usb-role-switch property
2019-03-28 15:33 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-28 15:15 UTC
usb: typec: mux: Store module handle
2019-03-28 14:56 UTC
[2/9] dt-bindings: usb: renesas_usb3: add extcon support
2019-03-28 13:04 UTC
usb: typec: mux: Store module handle
2019-03-28 12:02 UTC
usb: typec: mux: Store module handle
2019-03-28 11:52 UTC
[RFC,53/68] vfs: Convert functionfs to use the new mount API
2019-03-28 10:43 UTC
USB: serial: option: add Olicard 600
2019-03-28 8:26 UTC
[v2] USB: cp210x: add new device id
2019-03-28 8:16 UTC
USB: serial: option: Add support for Quectel EM12
2019-03-28 8:14 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-28 7:53 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-28 6:05 UTC
[RFC,53/68] vfs: Convert functionfs to use the new mount API
2019-03-27 23:47 UTC
[RFC,34/68] vfs: Convert gadgetfs to use the new mount API
2019-03-27 23:44 UTC
dt-bindings: usb: dwc2: document the vbus-supply property
2019-03-27 23:42 UTC
[2/9] dt-bindings: usb: renesas_usb3: add extcon support
2019-03-27 23:28 UTC
[v2] USB: hub: Remove returned value 'status' since never used
2019-03-27 19:40 UTC
[1/2] dt-bindings: usb: add non-removable-ports hub property
2019-03-27 19:32 UTC
usb: dwc3: of-simple: Convert to bulk clk API
2019-03-27 19:24 UTC
[3/3] usb: typec: mux: Use the "compatible" property instead of a boolean property
2019-03-27 16:43 UTC
[2/3] usb: roles: Use the "compatible" property instead of a boolean property
2019-03-27 16:43 UTC
[1/3] device property: Add fwnode_is_compatible() and device_is_compatible() helpers
2019-03-27 16:43 UTC
[v1] usb: dwc3: Free resource immediately after use
2019-03-27 15:17 UTC
USB/xHCI: Remove returned value 'status' since never used
2019-03-27 15:02 UTC
[net,stable] qmi_wwan: add Olicard 600
2019-03-27 14:26 UTC
USB: serial: option: add Olicard 600
2019-03-27 14:25 UTC
[v2] HID: add driver for U2F Zero built-in LED and RNG
2019-03-27 14:07 UTC
usb: u132-hcd: fix potential NULL pointer dereference
2019-03-27 13:57 UTC
USB/xHCI: Remove returned value 'status' since never used
2019-03-27 11:21 UTC
[v2] usb: dwc3: move synchronize_irq() out of the spinlock protected block
2019-03-27 9:56 UTC
usb: mtu3: fix EXTCON dependency
2019-03-27 6:56 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-27 1:16 UTC
[v2] USB: cp210x: add new device id
2019-03-27 1:11 UTC
r8152: Refresh MAC address during USBDEVFS_RESET
2019-03-26 20:23 UTC
USB/xHCI: Remove returned value 'status' since never used
2019-03-26 20:15 UTC
r8152: Refresh MAC address during USBDEVFS_RESET
2019-03-26 19:52 UTC
r8152: Refresh MAC address during USBDEVFS_RESET
2019-03-26 18:50 UTC
usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping
2019-03-26 17:29 UTC
[3/3] usb: ohci-da8xx: drop the vbus GPIO
2019-03-26 15:57 UTC
[2/3] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx
2019-03-26 15:57 UTC
[1/3] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
2019-03-26 15:57 UTC
usb: cdc-acm: fix race during wakeup blocking TX traffic
2019-03-26 10:00 UTC
[BACKPORT,4.4.y,04/25] USB: iowarrior: fix oops with malicious USB descriptors
2019-03-26 9:47 UTC
[BACKPORT,4.4.y,04/25] USB: iowarrior: fix oops with malicious USB descriptors
2019-03-26 9:35 UTC
usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping
2019-03-26 8:38 UTC
usb: sierra: fix a missing check of device_create_file
2019-03-26 8:23 UTC
[BACKPORT,4.4.y,04/25] USB: iowarrior: fix oops with malicious USB descriptors
2019-03-26 8:20 UTC
usb: sierra: fix a missing check of device_create_file
2019-03-26 8:18 UTC
usb: u132-hcd: fix resource leak
2019-03-26 8:12 UTC
[v5,6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
2019-03-26 7:36 UTC
phy: phy-twl4030-usb: Fix cable state handling
2019-03-26 7:35 UTC
USB: cp210x: add new device id
2019-03-26 4:52 UTC
usb: u132-hcd: fix potential NULL pointer dereference
2019-03-26 4:41 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-26 1:59 UTC
[BACKPORT,4.4.y,25/25] USB: core: only clean up what we allocated
2019-03-26 1:36 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-26 1:29 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-26 1:28 UTC
[BACKPORT,4.4.y,04/25] USB: iowarrior: fix oops with malicious USB descriptors
2019-03-26 1:13 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-26 0:55 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-26 0:49 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-26 0:13 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-26 0:04 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-25 23:02 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-25 22:07 UTC
r8152: Refresh MAC address during USBDEVFS_RESET
2019-03-25 18:02 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-25 17:56 UTC
tools: usb: usbip: adding support for older kernel versions
2019-03-25 15:51 UTC
usbip: Support error(event) detection in vhci_tx_loop() kernel thread
2019-03-25 14:23 UTC
[v2] usb: sierra: fix a missing check of device_create_file
2019-03-25 14:15 UTC
r8152: Refresh MAC address during USBDEVFS_RESET
2019-03-25 14:12 UTC
usb: mtu3: fix EXTCON dependency
2019-03-25 13:54 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-25 10:34 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-25 10:21 UTC
[v5,8/8] usb: dwc3: Add Amlogic G12A DWC3 glue
2019-03-25 9:39 UTC
[v5,7/8] usb: dwc2: Add Amlogic G12A DWC2 Params
2019-03-25 9:39 UTC
[v5,6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
2019-03-25 9:39 UTC
[v5,5/8] phy: amlogic: add Amlogic G12A USB2 PHY Driver
2019-03-25 9:39 UTC
[v5,4/8] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
2019-03-25 9:39 UTC
[v5,3/8] dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible
2019-03-25 9:39 UTC
[v5,2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
2019-03-25 9:39 UTC
[v5,1/8] dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings
2019-03-25 9:39 UTC
[v2] usb: sierra: fix a missing check of device_create_file
2019-03-25 3:08 UTC
usb: sierra: fix a missing check of device_create_file
2019-03-25 2:47 UTC
usb: musb: omap2430: Add support for idling phy when musb is idle
2019-03-24 23:34 UTC
phy: phy-twl4030-usb: Fix cable state handling
2019-03-24 23:26 UTC
usb: sierra: fix a missing check of device_create_file
2019-03-24 22:39 UTC
usb: core: Add PM runtime calls to usb_hcd_platform_shutdown
2019-03-23 15:22 UTC
usb: dwc3: Softdep for GBit Ethernet on Odroid XU4
2019-03-23 6:05 UTC
usb: core: Add PM runtime calls to usb_hcd_platform_shutdown
2019-03-22 21:54 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 21:01 UTC
usb: dwc3: Softdep for GBit Ethernet on Odroid XU4
2019-03-22 20:41 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 20:41 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 20:03 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 19:30 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 18:37 UTC
usb: host: ohci-platform: Implement ohci_platform_shutdown
2019-03-22 18:11 UTC
usb: cdc-acm: fix race during wakeup blocking TX traffic
2019-03-22 15:53 UTC
[3/3] xhci: Don't let USB3 ports stuck in polling state prevent suspend
2019-03-22 15:50 UTC
[2/3] usb: xhci: dbc: Don't free all memory with spinlock held
2019-03-22 15:50 UTC
[1/3] xhci: Fix port resume done detection for SS ports with LPM enabled
2019-03-22 15:50 UTC
[BACKPORT,4.4.y,25/25] USB: core: only clean up what we allocated
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,22/25] usb: renesas_usbhs: gadget: fix unused-but-set-variable warning
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,16/25] usb: gadget: Add the gserial port checking in gs_start_tx()
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,15/25] usb: gadget: composite: fix dereference after null check coverify warning
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,09/25] usb: dwc3: gadget: Fix suspend/resume during device mode
2019-03-22 15:44 UTC
[BACKPORT,4.4.y,04/25] USB: iowarrior: fix oops with malicious USB descriptors
2019-03-22 15:43 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 14:04 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:46 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:46 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:44 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:37 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:36 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:34 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:28 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:10 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 13:09 UTC
[2/2] usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
2019-03-22 12:56 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-22 12:46 UTC
[v2] usb: typec: tcpm: collision avoidance
2019-03-22 12:17 UTC
usb: typec: tcpm: collision avoidance
2019-03-22 11:54 UTC
[2/2] usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
2019-03-22 8:51 UTC
[1/2] phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
2019-03-22 8:51 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-22 8:38 UTC
[v3] usb: gadget: f_fs: don't free buffer prematurely
2019-03-22 6:12 UTC
[v4] usb: gadget: f_fs: don't free buffer prematurely
2019-03-22 6:07 UTC
usb: dwc3: Softdep for GBit Ethernet on Odroid XU4
2019-03-22 5:37 UTC
[v3] usb: gadget: f_fs: don't free buffer prematurely
2019-03-22 5:36 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-22 0:59 UTC
[v3] usb: gadget: f_fs: don't free buffer prematurely
2019-03-21 21:31 UTC
usb: dwc3: Softdep for GBit Ethernet on Odroid XU4
2019-03-21 20:23 UTC
dt-bindings: usb: dwc2: document the vbus-supply property
2019-03-21 19:21 UTC
usb: typec: tcpm: collision avoidance
2019-03-21 16:51 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-21 16:41 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-21 16:02 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-21 15:40 UTC
[3/3] usb: musb: jz4740: obtain USB PHY from devicetree
2019-03-21 15:09 UTC
[2/3] usb: musb: jz4740: Let the platform probe the PHY
2019-03-21 15:09 UTC
[1/3] dt-bindings: usb: Add usb-phy property to the jz4740-musb node
2019-03-21 15:09 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-21 14:54 UTC
usb: musb: Force-disable pullup on shutdown
2019-03-21 14:42 UTC
[regression] USB power management failure to suspend / high CPU usage
2019-03-21 13:32 UTC
[v2] usb: typec: fusb302: Fix debugfs mutex initialisation
2019-03-21 13:24 UTC
usb: musb: Support gadget mode when the port is set to dual role
2019-03-21 13:01 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 11:25 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 10:03 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 9:59 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 9:50 UTC
usb: gadget: functions: add ftrace export over USB
2019-03-21 9:47 UTC
usb: gadget: Don't allocate zero-length buffers
2019-03-21 7:42 UTC
[RESEND,11/11] usb: mtu3: add a function to switch mailbox state to string
2019-03-21 2:53 UTC
[RESEND,10/11] usb: mtu3: add tracepoints to help debug
2019-03-21 2:53 UTC
[RESEND,09/11] usb: mtu3: move vbus and mode debugfs interfaces into mtu3_debugfs.c
2019-03-21 2:53 UTC
[RESEND,08/11] usb: mtu3: add debugfs interface files
2019-03-21 2:53 UTC
[RESEND,07/11] usb: mtu3: supports new QMU format
2019-03-21 2:53 UTC
[RESEND,06/11] usb: mtu3: rebuild qmu_gpd struct to prepare to support new QMU format
2019-03-21 2:53 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).