messages from 2019-03-27 23:47:18 to 2019-04-05 09:20:03 UTC [more...]
USB keyboard and mouse non responsive at login
2019-04-05 9:19 UTC (3+ messages)
Kernel oops when using multiple V4L cameras on ODroid-C2 meson: 9600004f in dwc2_unmap_urb_for_dma+0x1c/0x28
2019-04-05 8:56 UTC
usb: dwc2: Delayed status support
2019-04-05 6:16 UTC (3+ messages)
` dwc2 patches
UAC2 gadget not recognized on Windows 10
2019-04-05 1:54 UTC
[v2] usb: host: xhci: Support running urb giveback in tasklet context
2019-04-04 20:54 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-04-04 19:33 UTC
[v2,2/2] r8152: Refresh MAC address during USBDEVFS_RESET
2019-04-04 18:46 UTC
[v2,1/2] r8152: remove extra action copying ethernet address
2019-04-04 18:46 UTC
[v3,5/6] usb: roles: add USB Type-B GPIO connector driver
2019-04-04 16:35 UTC
usb: musb: Disable pullup in gadget setup
2019-04-04 16:10 UTC
[v2] soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-04-04 15:34 UTC
[v2] usb: typec: tcpm: collision avoidance
2019-04-04 14:13 UTC
[v5,09/13] usb: roles: Add usb role switch notifier
2019-04-04 13:26 UTC
[v5,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
2019-04-04 13:25 UTC
[v2] usb: host: xhci: Support running urb giveback in tasklet context
2019-04-04 12:18 UTC
[v2,3/3] usb: musb: jz4740: obtain USB PHY from devicetree
2019-04-04 9:47 UTC
[v2,2/3] usb: musb: jz4740: Let the platform probe the PHY
2019-04-04 9:47 UTC
[v2,1/3] dt-bindings: usb: Add usb-phy property to the jz4740-musb node
2019-04-04 9:47 UTC
Mass Storage Gadget Device Falls from SuperSpeed to High Speed
2019-04-04 9:43 UTC
usb: musb: Disable pullup in gadget setup
2019-04-04 9:37 UTC
[5/5] usb: chipidea: msm: get optional clock by devm_clk_get_optional()
2019-04-04 7:28 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-04-04 3:57 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 18:54 UTC
[6/6] usb: musb: Decrease URB starting latency in musb_advance_schedule()
2019-04-03 18:53 UTC
[5/6] usb: musb: Introduce musb_start_urb()
2019-04-03 18:53 UTC
[4/6] usb: musb: Rename musb_start_urb() to musb_start_next_urb()
2019-04-03 18:53 UTC
[3/6] usb: musb: Introduce musb_qh_free() helper function
2019-04-03 18:53 UTC
[2/6] usb: musb: Introduce musb_qh_empty() helper function
2019-04-03 18:53 UTC
[1/6] usb: musb: Use USB_DIR_IN when calling musb_advance_schedule()
2019-04-03 18:53 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 15:52 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 15:46 UTC
[v2,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
2019-04-03 15:36 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 15:31 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 13:26 UTC
[V6,1/3] USB: serial: f81232: clear overrun flag
2019-04-03 10:36 UTC
usb: typec: Registering real device entries for the muxes
2019-04-03 10:29 UTC
[V6,3/3] USB: serial: f81232: implement break control
2019-04-03 8:40 UTC
[V6,2/3] USB: serial: f81232: add high baud rate support
2019-04-03 8:40 UTC
[V6,1/3] USB: serial: f81232: clear overrun flag
2019-04-03 8:40 UTC
[V5,1/3] USB: serial: f81232: clear overrun flag
2019-04-03 7:59 UTC
[2/2] USB: serial: pl2303: fix tranceiver suspend mode
2019-04-03 7:48 UTC
Mass Storage Gadget Device Falls from SuperSpeed to High Speed
2019-04-03 7:48 UTC
[2/5] usb: dwc2: Move phy init into core
2019-04-03 7:33 UTC
[V5,3/3] USB: serial: f81232: implement break control
2019-04-03 6:26 UTC
[V5,2/3] USB: serial: f81232: add high baud rate support
2019-04-03 6:26 UTC
[V5,1/3] USB: serial: f81232: clear overrun flag
2019-04-03 6:26 UTC
USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
2019-04-03 4:51 UTC
[2/5] usb: dwc2: Move phy init into core
2019-04-03 3:30 UTC
[v3,6/6] usb: mtu3: register a USB Role Switch for dual role mode
2019-04-03 2:09 UTC
[v3,5/6] usb: roles: add USB Type-B GPIO connector driver
2019-04-03 2:09 UTC
[v3,4/6] usb: roles: add API to get usb_role_switch by node
2019-04-03 2:09 UTC
[v3,3/6] dt-bindings: usb: mtu3: add properties about USB Role Switch
2019-04-03 2:09 UTC
[v3,2/6] dt-bindings: usb: add binding for Type-B GPIO connector driver
2019-04-03 2:09 UTC
[v3,1/6] dt-bindings: connector: add optional properties for Type-B
2019-04-03 2:09 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-02 19:58 UTC
usb: xhci: inherit dma_mask from bus if set correctly
2019-04-02 16:22 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-04-02 14:38 UTC
usb: typec: Registering real device entries for the muxes
2019-04-02 12:47 UTC
[V4,1/3] USB: serial: f81232: clear overrun flag
2019-04-02 12:37 UTC
[2/2] USB: serial: pl2303: fix tranceiver suspend mode
2019-04-02 12:04 UTC
[1/2] USB: serial: pl2303: fix non-supported xon/xoff
2019-04-02 12:03 UTC
[v2,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
2019-04-02 12:00 UTC
[1/4] usb: common: Consider only available nodes for dr_mode
2019-04-02 11:47 UTC
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices
2019-04-02 11:33 UTC
[1/4] usb: common: Consider only available nodes for dr_mode
2019-04-02 11:09 UTC
[v2,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
2019-04-02 11:01 UTC
[5/5] usb: dwc2: gadget: Move gadget phy init into core phy init
2019-04-02 10:39 UTC
[4/5] usb: dwc2: gadget: Replace phyif with phy_utmi_width
2019-04-02 10:39 UTC
[3/5] usb: dwc2: gadget: Remove duplicated phy init
2019-04-02 10:39 UTC
[2/5] usb: dwc2: Move phy init into core
2019-04-02 10:39 UTC
[1/5] usb: dwc2: Move UTMI_PHY_DATA defines closer
2019-04-02 10:39 UTC
usb: xhci: inherit dma_mask from bus if set correctly
2019-04-02 10:02 UTC
usb: xhci: inherit dma_mask from bus if set correctly
2019-04-02 9:40 UTC
drivers: usb: serial: ftdi_sio.c error flagging
2019-04-02 9:23 UTC
[1/4] usb: common: Consider only available nodes for dr_mode
2019-04-02 9:22 UTC
[2/2] USB: serial: pl2303: fix tranceiver suspend mode
2019-04-02 8:22 UTC
[2/2] USB: serial: pl2303: fix tranceiver suspend mode
2019-04-02 8:19 UTC
[1/2] USB: serial: pl2303: fix non-supported xon/xoff
2019-04-02 8:19 UTC
Mass Storage Gadget Device Falls from SuperSpeed to High Speed
2019-04-02 8:13 UTC
Mass Storage Gadget Device Falls from SuperSpeed to High Speed
2019-04-02 7:48 UTC
usb: typec: Registering real device entries for the muxes
2019-04-02 7:35 UTC
[v2] USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX)
2019-04-02 7:34 UTC
USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
2019-04-02 7:22 UTC
[v2] soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-04-02 6:09 UTC
[V4,3/3] USB: serial: f81232: implement break control
2019-04-02 5:26 UTC
[V4,2/3] USB: serial: f81232: add high baud rate support
2019-04-02 5:26 UTC
[V4,1/3] USB: serial: f81232: clear overrun flag
2019-04-02 5:26 UTC
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices
2019-04-02 4:21 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-04-02 3:26 UTC
[V2] usb: gadget: f_fs: don't free buffer prematurely
2019-04-02 3:25 UTC
[1/4] usb: common: Consider only available nodes for dr_mode
2019-04-02 1:53 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-04-02 0:28 UTC
soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-04-01 22:04 UTC
[v2] soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-04-01 22:03 UTC
scsi_set_medium_removal timeout issue
2019-04-01 20:27 UTC
usb: musb: omap2430: Add support for idling phy when musb is idle
2019-04-01 18:43 UTC
usb: musb: Silence error about blacklisting hubs if !CONFIG_USB
2019-04-01 18:34 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-01 18:20 UTC
usb: musb: Silence error about blacklisting hubs if !CONFIG_USB
2019-04-01 17:51 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-01 17:46 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-01 17:17 UTC
usb: musb: Silence error about blacklisting hubs if !CONFIG_USB
2019-04-01 15:43 UTC
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices
2019-04-01 15:36 UTC
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices
2019-04-01 15:32 UTC
soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-04-01 15:29 UTC
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices
2019-04-01 15:17 UTC
[v2] usb: host: xhci: Support running urb giveback in tasklet context
2019-04-01 14:43 UTC
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices
2019-04-01 14:24 UTC
[v2] usb: host: xhci: Support running urb giveback in tasklet context
2019-04-01 14:16 UTC
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices
2019-04-01 13:28 UTC
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices
2019-04-01 12:53 UTC
[03/12] dt-bindings: usb: ehci-r8a77470 devicetree binding document
2019-04-01 12:53 UTC
usb: typec: Registering real device entries for the muxes
2019-04-01 12:45 UTC
[v3] HID: add driver for U2F Zero built-in LED and RNG
2019-04-01 12:42 UTC
usb: typec: Registering real device entries for the muxes
2019-04-01 12:40 UTC
[1/3] xhci: Fix port resume done detection for SS ports with LPM enabled
2019-04-01 11:37 UTC
usb: gadget: dwc2: fix zlp handling
2019-04-01 11:33 UTC
usb: gadget: dwc2: fix zlp handling
2019-04-01 10:50 UTC
usb: dwc2: gadget: add scatter-gather mode
2019-04-01 10:49 UTC
[1/3] xhci: Fix port resume done detection for SS ports with LPM enabled
2019-04-01 10:42 UTC
[v2,6/6] arm64: tegra: Remove regulator hacks on Jetson TX2
2019-04-01 10:40 UTC
[v2,5/6] arm64: tegra: Enable XUSB on P2771
2019-04-01 10:40 UTC
[v2,4/6] arm64: tegra: Add XUSB and pad controller on Tegra186
2019-04-01 10:40 UTC
[v2,3/6] usb: host: xhci-tegra: Add Tegra186 XUSB support
2019-04-01 10:40 UTC
[v2,2/6] usb: host: xhci-tegra: Selectively program IPFS
2019-04-01 10:40 UTC
[v2,1/6] dt-bindings: usb: xhci-tegra: Add Tegra186 support
2019-04-01 10:40 UTC
usb: typec: Registering real device entries for the muxes
2019-04-01 10:34 UTC
usb: typec: Registering real device entries for the muxes
2019-04-01 10:15 UTC
usb: dwc2: gadget: add scatter-gather mode
2019-04-01 10:01 UTC
[RESEND,V3,1/3] USB: serial: f81232: clear overrun flag
2019-04-01 9:01 UTC
[4/5] usb: dwc2: get optional clock by devm_clk_get_optional()
2019-04-01 8:47 UTC
[RESEND,V3,1/3] USB: serial: f81232: clear overrun flag
2019-04-01 8:34 UTC
[RESEND,V3,3/3] USB: serial: f81232: implement break control
2019-04-01 6:00 UTC
[RESEND,V3,2/3] USB: serial: f81232: add high baud rate support
2019-04-01 6:00 UTC
[RESEND,V3,1/3] USB: serial: f81232: clear overrun flag
2019-04-01 6:00 UTC
[v5,6/6] usb: musb: Add support for MediaTek musb controller
2019-04-01 5:35 UTC
[v2,1/6] dt-bindings: connector: add optional properties for Type-B
2019-03-31 12:45 UTC
[1/3] dt-bindings: usb: Add usb-phy property to the jz4740-musb node
2019-03-31 6:41 UTC
[v2,1/6] dt-bindings: connector: add optional properties for Type-B
2019-03-31 6:40 UTC
usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping
2019-03-30 15:02 UTC
usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping
2019-03-30 12:53 UTC
[next] usb: mtu3: get optional clock by devm_clk_get_optional()
2019-03-30 9:40 UTC
[5/5] usb: chipidea: msm: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[4/5] usb: dwc2: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[3/5] usb: misc: usb3503: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[2/5] usb: host: xhci-plat: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[1/5] usb: xhci-mtk: get optional clock by devm_clk_get_optional()
2019-03-30 9:28 UTC
[v5,6/6] usb: musb: Add support for MediaTek musb controller
2019-03-30 8:52 UTC
usb: gadget: Don't allocate zero-length buffers
2019-03-29 19:54 UTC
usb: dwc2: gadget: add scatter-gather mode
2019-03-29 15:17 UTC
usb: host: xhci-plat: Prevent an abnormally restrictive PHY init skipping
2019-03-29 15:16 UTC
usb: typec: mux: Store module handle
2019-03-29 15:05 UTC
[V3,1/3] USB: serial: f81232: clear overrun flag
2019-03-29 14:40 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-29 14:13 UTC
usb: dwc2: gadget: add scatter-gather mode
2019-03-29 14:05 UTC
[v2,2/7] dt-bindings: usb: renesas_usb3: add usb-role-switch property
2019-03-29 13:57 UTC
[v2,6/6] usb: ohci-da8xx: drop the vbus GPIO
2019-03-29 9:33 UTC
[v2,5/6] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx
2019-03-29 9:33 UTC
[v2,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
2019-03-29 9:33 UTC
[v2,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
2019-03-29 9:33 UTC
[v2,2/6] usb: ohci-da8xx: let the regulator framework keep track of use count
2019-03-29 9:33 UTC
[v2,1/6] ARM: davinci: add missing sentinels to GPIO lookup tables
2019-03-29 9:33 UTC
[V3,3/3] USB: serial: f81232: implement break control
2019-03-29 8:28 UTC
[V3,2/3] USB: serial: f81232: add high baud rate support
2019-03-29 8:28 UTC
[V3,1/3] USB: serial: f81232: clear overrun flag
2019-03-29 8:28 UTC
[v5,13/13] dts: hi3660: Add support for usb on Hikey960
2019-03-29 4:14 UTC
[v5,12/13] usb: gadget: Add configfs attribuite for controling match_existing_only
2019-03-29 4:14 UTC
[v5,11/13] hikey960: Support usb functionality of Hikey960
2019-03-29 4:14 UTC
[v5,10/13] usb: dwc3: Registering a role switch in the DRD code
2019-03-29 4:14 UTC
[v5,09/13] usb: roles: Add usb role switch notifier
2019-03-29 4:14 UTC
[v5,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
2019-03-29 4:14 UTC
[v5,07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon
2019-03-29 4:14 UTC
[v5,06/13] usb: dwc3: Increase timeout for CmdAct cleared by device controller
2019-03-29 4:14 UTC
[v5,05/13] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc
2019-03-29 4:14 UTC
[v5,04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
2019-03-29 4:14 UTC
[v5,03/13] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform
2019-03-29 4:13 UTC
[v5,02/13] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
2019-03-29 4:13 UTC
[v5,01/13] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
2019-03-29 4:13 UTC
dt-bindings: usb: dwc2: document the vbus-supply property
2019-03-28 20:00 UTC
[v2,2/7] dt-bindings: usb: renesas_usb3: add usb-role-switch property
2019-03-28 17:48 UTC
[v4,01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
2019-03-28 17:11 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-28 16:49 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-28 15:57 UTC
[v2,1/7] dt-bindings: usb: hd3ss3220 device tree binding document
2019-03-28 15:35 UTC
[v2,2/7] dt-bindings: usb: renesas_usb3: add usb-role-switch property
2019-03-28 15:33 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-28 15:15 UTC
usb: typec: mux: Store module handle
2019-03-28 14:56 UTC
[2/9] dt-bindings: usb: renesas_usb3: add extcon support
2019-03-28 13:04 UTC
usb: typec: mux: Store module handle
2019-03-28 12:02 UTC
usb: typec: mux: Store module handle
2019-03-28 11:52 UTC
[RFC,53/68] vfs: Convert functionfs to use the new mount API
2019-03-28 10:43 UTC
USB: serial: option: add Olicard 600
2019-03-28 8:26 UTC
[v2] USB: cp210x: add new device id
2019-03-28 8:16 UTC
USB: serial: option: Add support for Quectel EM12
2019-03-28 8:14 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-03-28 7:53 UTC
[v4,5/6] usb:cdns3 Add Cadence USB3 DRD Driver
2019-03-28 6:05 UTC
[RFC,53/68] vfs: Convert functionfs to use the new mount API
2019-03-27 23:47 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).