messages from 2019-04-02 07:48:55 to 2019-04-09 10:47:57 UTC [more...]
Deferred URB submission for timesharing the DMA channels of DWC_OTG host controller in Raspberry PI
2019-04-09 10:47 UTC (8+ messages)
` [PATCH] "
` [v2] usb: serial: defer URB submission for ftdi_sio
` [PATCH v2] "
[03/12] dt-bindings: usb: ehci-r8a77470 devicetree binding document
2019-04-09 10:39 UTC (6+ messages)
` [PATCH 03/12] "
[PATCH v3 0/6] ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator
2019-04-09 10:36 UTC (15+ messages)
` [v3,1/6] ARM: davinci: add missing sentinels to GPIO lookup tables
` [PATCH v3 1/6] "
` [v3,2/6] usb: ohci-da8xx: let the regulator framework keep track of use count
` [PATCH v3 2/6] "
` [v3,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
` [PATCH v3 3/6] "
` [v3,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
` [PATCH v3 4/6] "
` [v3,5/6] ARM: davinci: da830-evm: "
` [PATCH v3 5/6] "
` [v3,6/6] usb: ohci-da8xx: drop the vbus GPIO
` [PATCH v3 6/6] "
USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
2019-04-09 9:52 UTC (4+ messages)
` [PATCH] "
[PATCH v5 0/8] arm64: meson: Add support for USB on Amlogic G12A
2019-04-09 9:35 UTC (2+ messages)
[7/8] usb: dwc2: Add Amlogic G12A DWC2 Params
2019-04-09 9:31 UTC (3+ messages)
` [PATCH 7/8] "
lan78xx: About 8000 usb interrupts per second when idle
2019-04-09 9:28 UTC (2+ messages)
Question about regulators
2019-04-09 7:41 UTC (3+ messages)
net: lan78xx: fix "enabled interrupts" warninig
2019-04-09 5:26 UTC (12+ messages)
` [PATCH] "
usb: xhci: inherit dma_mask from bus if set correctly
2019-04-09 2:56 UTC (5+ messages)
` [PATCH] "
RESEND: How to configure kernel to support USB device mode (gadget) UASP feature
2019-04-09 2:42 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-04-09 2:10 UTC (8+ messages)
` [PATCH] "
usb: dwc2: disable power_down on rockchip devices
2019-04-08 22:48 UTC (4+ messages)
` [RESEND,v2] usb: dwc2: disable power_down on rockchip for regression
` [RESEND PATCH v2] "
Bug: VHCI + USB 3.0
2019-04-08 19:50 UTC (16+ messages)
[v4,3/3] fpga: Add fpga manager driver for ARRI Altera FPP
2019-04-08 19:01 UTC (7+ messages)
` [PATCH v4 3/3] "
[PATCH v2 0/6] usb: host: xhci-tegra: Add Tegra186 XUSB support
2019-04-08 15:02 UTC (3+ messages)
[v2] usb: host: xhci: Support running urb giveback in tasklet context
2019-04-08 14:26 UTC (4+ messages)
` [PATCH v2] "
[v2] usb: typec: tcpm: collision avoidance
2019-04-08 14:17 UTC (6+ messages)
` [PATCH v2] "
[v3,5/6] usb: roles: add USB Type-B GPIO connector driver
2019-04-08 8:14 UTC (4+ messages)
` [v3 PATCH 5/6] "
Bug: cdc_acm blocking write after many small writes
2019-04-08 7:32 UTC (2+ messages)
Why there is a refcnt check when we change configfs property
2019-04-08 7:00 UTC
Problem with USB2 devices connected to a hub
2019-04-08 6:46 UTC
[1/4] usb: common: Consider only available nodes for dr_mode
2019-04-08 5:52 UTC (7+ messages)
` [PATCH 1/4] "
Regression xhci_hcd cmd failed due to incorrect slot or ep state
2019-04-07 10:32 UTC
[PATCH v2 0/2] Support runtime changes of vendor mac passthu policy
2019-04-07 1:22 UTC
Regression causes a hang on boot with a Comtrol PCI card
2019-04-06 15:32 UTC (2+ messages)
PCI device appears intermittently
2019-04-05 14:10 UTC
[PATCH v2 0/5] usb: dwc2: Improve gadget phy init
2019-04-05 13:35 UTC (11+ messages)
` [v2,1/5] usb: dwc2: Move UTMI_PHY_DATA defines closer
` [PATCH v2 1/5] "
` [v2,2/5] usb: dwc2: gadget: Remove duplicated phy init
` [PATCH v2 2/5] "
` [v2,3/5] usb: dwc2: gadget: Replace phyif with phy_utmi_width
` [PATCH v2 3/5] "
` [v2,4/5] usb: dwc2: Move phy init into core
` [PATCH v2 4/5] "
` [v2,5/5] usb: dwc2: gadget: Move gadget phy init into core phy init
` [PATCH v2 5/5] "
USB keyboard and mouse non responsive at login
2019-04-05 9:19 UTC (3+ messages)
Kernel oops when using multiple V4L cameras on ODroid-C2 meson: 9600004f in dwc2_unmap_urb_for_dma+0x1c/0x28
2019-04-05 8:56 UTC
usb: dwc2: Delayed status support
2019-04-05 6:16 UTC (3+ messages)
` dwc2 patches
UAC2 gadget not recognized on Windows 10
2019-04-05 1:54 UTC
[v2,2/2] r8152: Refresh MAC address during USBDEVFS_RESET
2019-04-04 18:46 UTC
[v2,1/2] r8152: remove extra action copying ethernet address
2019-04-04 18:46 UTC
usb: musb: Disable pullup in gadget setup
2019-04-04 16:10 UTC
[v2] soc: sunxi: Fix missing dependency on REGMAP_MMIO
2019-04-04 15:34 UTC
[v5,09/13] usb: roles: Add usb role switch notifier
2019-04-04 13:26 UTC
[v5,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
2019-04-04 13:25 UTC
[v2,3/3] usb: musb: jz4740: obtain USB PHY from devicetree
2019-04-04 9:47 UTC
[v2,2/3] usb: musb: jz4740: Let the platform probe the PHY
2019-04-04 9:47 UTC
[v2,1/3] dt-bindings: usb: Add usb-phy property to the jz4740-musb node
2019-04-04 9:47 UTC
Mass Storage Gadget Device Falls from SuperSpeed to High Speed
2019-04-04 9:43 UTC
usb: musb: Disable pullup in gadget setup
2019-04-04 9:37 UTC
[5/5] usb: chipidea: msm: get optional clock by devm_clk_get_optional()
2019-04-04 7:28 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 18:54 UTC
[6/6] usb: musb: Decrease URB starting latency in musb_advance_schedule()
2019-04-03 18:53 UTC
[5/6] usb: musb: Introduce musb_start_urb()
2019-04-03 18:53 UTC
[4/6] usb: musb: Rename musb_start_urb() to musb_start_next_urb()
2019-04-03 18:53 UTC
[3/6] usb: musb: Introduce musb_qh_free() helper function
2019-04-03 18:53 UTC
[2/6] usb: musb: Introduce musb_qh_empty() helper function
2019-04-03 18:53 UTC
[1/6] usb: musb: Use USB_DIR_IN when calling musb_advance_schedule()
2019-04-03 18:53 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 15:52 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 15:46 UTC
[v2,3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
2019-04-03 15:36 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 15:31 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-03 13:26 UTC
[V6,1/3] USB: serial: f81232: clear overrun flag
2019-04-03 10:36 UTC
usb: typec: Registering real device entries for the muxes
2019-04-03 10:29 UTC
[V6,3/3] USB: serial: f81232: implement break control
2019-04-03 8:40 UTC
[V6,2/3] USB: serial: f81232: add high baud rate support
2019-04-03 8:40 UTC
[V6,1/3] USB: serial: f81232: clear overrun flag
2019-04-03 8:40 UTC
[V5,1/3] USB: serial: f81232: clear overrun flag
2019-04-03 7:59 UTC
[2/2] USB: serial: pl2303: fix tranceiver suspend mode
2019-04-03 7:48 UTC
Mass Storage Gadget Device Falls from SuperSpeed to High Speed
2019-04-03 7:48 UTC
[2/5] usb: dwc2: Move phy init into core
2019-04-03 7:33 UTC
[V5,3/3] USB: serial: f81232: implement break control
2019-04-03 6:26 UTC
[V5,2/3] USB: serial: f81232: add high baud rate support
2019-04-03 6:26 UTC
[V5,1/3] USB: serial: f81232: clear overrun flag
2019-04-03 6:26 UTC
USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
2019-04-03 4:51 UTC
[2/5] usb: dwc2: Move phy init into core
2019-04-03 3:30 UTC
[v3,6/6] usb: mtu3: register a USB Role Switch for dual role mode
2019-04-03 2:09 UTC
[v3,4/6] usb: roles: add API to get usb_role_switch by node
2019-04-03 2:09 UTC
[v3,3/6] dt-bindings: usb: mtu3: add properties about USB Role Switch
2019-04-03 2:09 UTC
[v3,2/6] dt-bindings: usb: add binding for Type-B GPIO connector driver
2019-04-03 2:09 UTC
[v3,1/6] dt-bindings: connector: add optional properties for Type-B
2019-04-03 2:09 UTC
usb: musb: Force-disable pullup on shutdown
2019-04-02 19:58 UTC
usb: uas: fix usb subsystem hang after power off hub port
2019-04-02 14:38 UTC
usb: typec: Registering real device entries for the muxes
2019-04-02 12:47 UTC
[V4,1/3] USB: serial: f81232: clear overrun flag
2019-04-02 12:37 UTC
[2/2] USB: serial: pl2303: fix tranceiver suspend mode
2019-04-02 12:04 UTC
[1/2] USB: serial: pl2303: fix non-supported xon/xoff
2019-04-02 12:03 UTC
[v2,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
2019-04-02 12:00 UTC
[04/12] usb: host: ehci-r8a77470: Add EHCI support for Renesas RZ/G1C devices
2019-04-02 11:33 UTC
[v2,4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
2019-04-02 11:01 UTC
[5/5] usb: dwc2: gadget: Move gadget phy init into core phy init
2019-04-02 10:39 UTC
[4/5] usb: dwc2: gadget: Replace phyif with phy_utmi_width
2019-04-02 10:39 UTC
[3/5] usb: dwc2: gadget: Remove duplicated phy init
2019-04-02 10:39 UTC
[2/5] usb: dwc2: Move phy init into core
2019-04-02 10:39 UTC
[1/5] usb: dwc2: Move UTMI_PHY_DATA defines closer
2019-04-02 10:39 UTC
drivers: usb: serial: ftdi_sio.c error flagging
2019-04-02 9:23 UTC
[2/2] USB: serial: pl2303: fix tranceiver suspend mode
2019-04-02 8:22 UTC
[2/2] USB: serial: pl2303: fix tranceiver suspend mode
2019-04-02 8:19 UTC
[1/2] USB: serial: pl2303: fix non-supported xon/xoff
2019-04-02 8:19 UTC
Mass Storage Gadget Device Falls from SuperSpeed to High Speed
2019-04-02 8:13 UTC
Mass Storage Gadget Device Falls from SuperSpeed to High Speed
2019-04-02 7:48 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).