messages from 2019-04-17 10:49:30 to 2019-04-19 19:08:43 UTC [more...]
[PATCH v2 0/5] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron
2019-04-19 16:44 UTC (15+ messages)
` [v2,1/5] usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE
` [PATCH v2 1/5] "
` [v2,2/5] USB: Export usb_wakeup_enabled_descendants()
` [PATCH v2 2/5] "
` [v2,3/5] Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB
` [PATCH v2 3/5] "
` [v2,4/5] USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled
` [PATCH v2 4/5] "
` [v2,5/5] ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports
` [PATCH v2 5/5] "
[PATCH v1 00/14] usb: dwc2: Fix and improve power saving modes
2019-04-19 11:25 UTC (13+ messages)
` [v1,05/14] usb: dwc2: Add port conn. sts. checking in _dwc2_hcd_resume() function
` [PATCH v1 05/14] "
` [v1,06/14] usb: dwc2: Add part. power down exit from dwc2_conn_id_status_change()
` [PATCH v1 06/14] "
` [v1,08/14] usb: dwc2: Add default param to control power optimization
` [PATCH v1 08/14] "
` [v1,09/14] usb: dwc2: Update dwc2_handle_usb_suspend_intr function
` [PATCH v1 09/14] "
` [v1,11/14] usb: dwc2: Allow exiting hibernation from gpwrdn rst detect
` [PATCH v1 11/14] "
` [v1,13/14] usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated
` [PATCH v1 13/14] "
USB fuzzing with syzbot
2019-04-19 14:39 UTC (3+ messages)
INFO: task hung in usb_kill_urb
2019-04-19 18:36 UTC (6+ messages)
` UDC hardware for fuzzing [was: Re: INFO: task hung in usb_kill_urb]
usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON
2019-04-19 11:35 UTC (3+ messages)
` [PATCH] "
[1/2] USB: serial: digi_acceleport: clean up modem-control handling
2019-04-19 8:27 UTC (8+ messages)
` [PATCH 1/2] "
` [2/2] USB: serial: digi_acceleport: clean up set_termios
` [PATCH 2/2] "
USB: serial: pl2303: fix xon/xoff flow control
2019-04-19 8:28 UTC (4+ messages)
` [PATCH] "
[v3] usb/hcd: Send a uevent signaling that the host controller had died
2019-04-19 12:16 UTC (28+ messages)
` [PATCH v3] "
USB: core: Fix bug caused by duplicate interface PM usage counter
2019-04-19 17:52 UTC (2+ messages)
` [PATCH] "
[v4] usb/hcd: Send a uevent signaling that the host controller had died
2019-04-19 15:30 UTC
[v1,14/14] usb: dwc2: Add enter/exit hibernation from system issued suspend/resume
2019-04-19 11:25 UTC
[v1,12/14] usb: dwc2: Clear fifo_map when resetting core
2019-04-19 11:25 UTC
[v1,10/14] usb: dwc2: Fix hibernation between host and device modes
2019-04-19 11:25 UTC
[v1,07/14] usb: dwc2: Reset DEVADDR after exiting gadget hibernation
2019-04-19 11:24 UTC
[v1,04/14] usb: dwc2: Fix suspend state in host mode for partial power down
2019-04-19 11:24 UTC
[v1,03/14] usb: dwc2: Fix wakeup detected and session request interrupt handlers
2019-04-19 11:23 UTC
[v1,02/14] usb: dwc2: Add descriptive debug messages for Partial Power Down mode
2019-04-19 11:23 UTC
[v1,01/14] usb: dwc2: Fix dwc2_restore_device_registers() function
2019-04-19 11:23 UTC
[1/1] r8152: sync sa_family with the media type of network device
2019-04-19 8:45 UTC
usbnet: fix kernel crash after disconnect
2019-04-19 7:17 UTC
[V8,1/4] USB: serial: f81232: clear overrun flag
2019-04-19 2:45 UTC (8+ messages)
` [PATCH V8 1/4] "
` [V8,2/4] USB: serial: f81232: fix interrupt worker not stop
` [PATCH V8 2/4] "
` [V8,3/4] USB: serial: f81232: add high baud rate support
` [PATCH V8 3/4] "
` [V8,4/4] USB: serial: f81232: implement break control
` [PATCH V8 4/4] "
usbnet: fix kernel crash after disconnect
2019-04-18 23:35 UTC (7+ messages)
` [PATCH] "
WARNING in usb_submit_urb (4)
2019-04-18 20:24 UTC (19+ messages)
[4.19,069/110] usbip: fix vhci_hcd controller counting
2019-04-18 17:56 UTC (2+ messages)
` [PATCH 4.19 069/110] "
[4.14,49/92] usbip: fix vhci_hcd controller counting
2019-04-18 17:57 UTC (2+ messages)
` [PATCH 4.14 49/92] "
INFO: task hung in usb_kill_urb
2019-04-18 17:12 UTC (9+ messages)
` USB: dummy-hcd: Fix failure to give back unlinked URBs
` [PATCH] "
general protection fault in __dev_printk
2019-04-18 17:07 UTC (2+ messages)
[v3] usb: host: use usb_endpoint_maxp instead of usb_maxpacket
2019-04-18 15:25 UTC (2+ messages)
` [PATCH v3] "
[PATCH v2] usb:host: fix divide-by-zero in function fhci_queue_urb
2019-04-18 14:33 UTC (2+ messages)
[PATCH 00/57] Convert files to ReST
2019-04-18 12:42 UTC (2+ messages)
` Avoiding merge conflicts while adding new docs - Was: "
BUG: unable to handle kernel paging request in osq_lock
2019-04-18 12:36 UTC
general protection fault in smsusb_init_device
2019-04-18 12:06 UTC
usb: dwc2: gadget: Reject LPM token during Control transfers
2019-04-18 11:40 UTC (2+ messages)
` [PATCH] "
[PATCH v3 00/26] compat_ioctl: cleanups
2019-04-18 11:10 UTC (7+ messages)
` [v3,09/26] compat_ioctl: move drivers to compat_ptr_ioctl
` [PATCH v3 09/26] "
` [v3,10/26] compat_ioctl: use correct compat_ptr() translation in drivers
` [PATCH v3 10/26] "
[v2] usb:host: fix divide-by-zero in function fhci_queue_urb
2019-04-18 9:58 UTC (2+ messages)
` [PATCH v2] "
[v2] usb:host: fix divide-by-zero in function fhci_queue_urb
2019-04-17 19:49 UTC (6+ messages)
` [PATCH v2] "
[v2] usb/hcd: Send a uevent signaling that the host controller has died
2019-04-17 18:31 UTC (8+ messages)
` [PATCH v2] "
[PATCH] usb:host: fix divide-by-zero in function fhci_queue_urb
2019-04-17 15:33 UTC
[v3] HID: add driver for U2F Zero built-in LED and RNG
2019-04-17 14:47 UTC (9+ messages)
` [PATCH v3] "
[PATCH v3 0/7] usb: typec: ucsi: Remaining changes for v5.2
2019-04-17 14:40 UTC (16+ messages)
` [v3,1/7] usb: typec: ucsi: ccg: add get_fw_info function
` [PATCH v3 1/7] "
` [v3,2/7] i2c: nvidia-gpu: Supply CCGx driver the fw build info
` [PATCH v3 2/7] "
` [v3,3/7] usb: typec: ucsi: ccg: add firmware flashing support
` [PATCH v3 3/7] "
` [v3,4/7] usb: typec: ucsi: Preliminary support for alternate modes
` [PATCH v3 4/7] "
` [v3,5/7] usb: typec: ucsi: Support for DisplayPort alt mode
` [PATCH v3 5/7] "
` [v3,6/7] usb: typec: displayport: Export probe and remove functions
` [PATCH v3 6/7] "
` [v3,7/7] usb: typec: Add driver for NVIDIA Alt Modes
` [PATCH v3 7/7] "
USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
2019-04-17 13:48 UTC (10+ messages)
` [PATCH] "
[PATCH] usb:host: fix divide-by-zero in function fhci_queue_urb
2019-04-17 13:45 UTC (2+ messages)
KASAN: slab-out-of-bounds Read in ds_probe
2019-04-17 11:26 UTC
[PATCH V4 0/7] Add USB3.0 and TI HD3SS3220 driver support
2019-04-17 11:07 UTC (5+ messages)
` [V4,3/7] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
` [PATCH V4 3/7] "
[v2,1/3] usb: typec: tcpm: Notify the tcpc to start connection-detection for SRPs
2019-04-17 10:53 UTC (9+ messages)
` [v2,2/3] usb: typec: fusb302: Implement start_toggling for all port-types
` [PATCH v2 2/3] "
` [v2,3/3] usb: typec: fusb302: Revert "Resolve fixed power role contract setup"
` [PATCH v2 3/3] "
` [PATCH v2 1/3] usb: typec: tcpm: Notify the tcpc to start connection-detection for SRPs
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).