From: Jaejoong Kim <climbbb.kim@gmail.com>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: mina86@mina86.com, Felipe Balbi <balbi@kernel.org>,
Greg KH <gregkh@linuxfoundation.org>,
Krzysztof Opasiak <k.opasiak@samsung.com>,
USB list <linux-usb@vger.kernel.org>
Subject: [3/3] usb: gadget: storage: Remove EXPORT_SYMBOL_GPL for kref_{put, get}
Date: Fri, 15 Jun 2018 03:23:25 +0900 [thread overview]
Message-ID: <CAL6iAaKo+t0ObEUEJqaAJ3ejcwJeN35rkepAbMo2i4VGD+0SrQ@mail.gmail.com> (raw)
Thanks for the review it.
2018년 6월 14일 (목) 오후 11:48, Alan Stern <stern@rowland.harvard.edu>님이 작성:
>
> On Thu, 14 Jun 2018, Jaejoong Kim wrote:
>
> > Removing EXPORT_SYMBOL_GPL from kref_{put, get} since it is used
> > only in f_mass_storage
> >
> > Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
>
> This is only a partial solution. In fact, fsg_common_get() isn't used
> anywhere, and fsg_common_put() is used in only one place.
Right. Actually my first approach was to remove fsg_common_get/put and just
use kref APIs(kref_get/put). But I kept current codes because this module author
might have another reason.
>
> It would be better to remove those two routines, get rid of common->ref
> entirely, and make fsg_free_inst() call fsg_common_release() directly.
Hm.. If you want to call fsg_common_release () in fsg_free_inst (),
the struct kref
in this moduel is meaningless. I prefer hold kref and just use kref APIs not
fsg_common_get/put.
Thanks, Jaejoong
>
> Alan Stern
>
> > ---
> > drivers/usb/gadget/function/f_mass_storage.c | 6 ++----
> > drivers/usb/gadget/function/f_mass_storage.h | 4 ----
> > 2 files changed, 2 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
> > index b6e2930..ba0eb7e 100644
> > --- a/drivers/usb/gadget/function/f_mass_storage.c
> > +++ b/drivers/usb/gadget/function/f_mass_storage.c
> > @@ -2558,17 +2558,15 @@ static void fsg_lun_release(struct device *dev)
> > /* Nothing needs to be done */
> > }
> >
> > -void fsg_common_get(struct fsg_common *common)
> > +static void __maybe_unused fsg_common_get(struct fsg_common *common)
> > {
> > kref_get(&common->ref);
> > }
> > -EXPORT_SYMBOL_GPL(fsg_common_get);
> >
> > -void fsg_common_put(struct fsg_common *common)
> > +static void fsg_common_put(struct fsg_common *common)
> > {
> > kref_put(&common->ref, fsg_common_release);
> > }
> > -EXPORT_SYMBOL_GPL(fsg_common_put);
> >
> > static struct fsg_common *fsg_common_setup(struct fsg_common *common)
> > {
> > diff --git a/drivers/usb/gadget/function/f_mass_storage.h b/drivers/usb/gadget/function/f_mass_storage.h
> > index 58857fc..3b8c4ce 100644
> > --- a/drivers/usb/gadget/function/f_mass_storage.h
> > +++ b/drivers/usb/gadget/function/f_mass_storage.h
> > @@ -115,10 +115,6 @@ fsg_opts_from_func_inst(const struct usb_function_instance *fi)
> > return container_of(fi, struct fsg_opts, func_inst);
> > }
> >
> > -void fsg_common_get(struct fsg_common *common);
> > -
> > -void fsg_common_put(struct fsg_common *common);
> > -
> > void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs);
> >
> > int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n);
> >
>
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2018-06-14 18:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-14 18:23 Jaejoong Kim [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-06-26 8:54 [3/3] usb: gadget: storage: Remove EXPORT_SYMBOL_GPL for kref_{put, get} Michał Nazarewicz
2018-06-14 21:09 Alan Stern
2018-06-14 18:26 Jaejoong Kim
2018-06-14 18:14 Sergei Shtylyov
2018-06-14 14:48 Alan Stern
2018-06-14 9:23 Jaejoong Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAL6iAaKo+t0ObEUEJqaAJ3ejcwJeN35rkepAbMo2i4VGD+0SrQ@mail.gmail.com \
--to=climbbb.kim@gmail.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=k.opasiak@samsung.com \
--cc=linux-usb@vger.kernel.org \
--cc=mina86@mina86.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).