Re: [PATCH 3/4] phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence

["Luca Weiss" <luca.weiss@fairphone.com>]

On Wed Jun 25, 2025 at 1:51 PM CEST, Konrad Dybcio wrote:
> On 6/25/25 11:14 AM, Luca Weiss wrote:
>> As per a commit from Qualcomm's downstream 6.1 kernel[0], the init
>> sequence is missing writing 0x00 to USB_PHY_CFG0 at the end, as per the
>> 'latest' HPG revision (as of November 2023).
>> 
>> [0] https://git.codelinaro.org/clo/la/kernel/qcom/-/commit/b77774a89e3fda3246e09dd39e16e2ab43cd1329
>> 
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> ---
>
> Both the original and your commit messages are slightly misleading, the
> HPG (and the code which is indeed in sync with it after the change is
> made) only sets the value of 0 to BIT(1), a.k.a. CMN_CTRL_OVERRIDE_EN.
> You most definitely don't want to set the entire register to 0.

After reading your message twice I think I've got it.

Code is correct, but commit message is wrong (it's saying writing 0x00
but it's not actually doing this in the code, just setting the bit to 0).

>
> With that fixed:
>
> Fixes: 80090810f5d3 ("phy: qcom: Add QCOM SNPS eUSB2 driver")
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Thanks for taking a look!

Regards
Luca

>
> Konrad