From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: lijiazi <jqqlijiazi@gmail.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
lijiazi <lijiazi@xiaomi.com>,
linux-usb@vger.kernel.org
Subject: Re: [PATCH] usb: typec: add sanity check for opmode
Date: Thu, 26 Nov 2020 09:24:29 +0100 [thread overview]
Message-ID: <X79mPTrr4rakUV8S@kroah.com> (raw)
In-Reply-To: <1795c4568c3d7cfdd6b89258473a5e10bfc821f6.1606357163.git.lijiazi@xiaomi.com>
On Thu, Nov 26, 2020 at 01:10:55PM +0800, lijiazi wrote:
> If usb drivers set a invalid value, for example, a negative
> value. then a userspace task
> cat sys/class/typec/port0/power_operation_mode, will cause a
> panic issue:
> [154325.262827] Unable to handle kernel paging request at virtual
> address ffffff980aad8b68
> [154325.262838] Mem abort info:
> [154325.262843] ESR = 0x96000005
> [154325.262849] Exception class = DABT (current EL), IL = 32 bits
> [154325.262855] SET = 0, FnV = 0
> [154325.262860] EA = 0, S1PTW = 0
> [154325.262865] Data abort info:
> [154325.262870] ISV = 0, ISS = 0x00000005
> [154325.262875] CM = 0, WnR = 0
> [154325.262880] swapper pgtable: 4k pages, 39-bit VAs, pgdp =
> 000000001cae9c14
> [154325.262884] [ffffff980aad8b68] pgd=0000000000000000,
> pud=0000000000000000
> [154325.262891] Internal error: Oops: 96000005 [#1] PREEMPT SMP
> [154325.262896] Modules linked in: rmnet_perf(O) rmnet_shs(O)
> wlan(O) sla(O) exfat(O) machine_dlkm(O) tfa98xx_dlkm(O)
> cs35l41_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O)
> wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O)
> va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O)
> bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O)
> hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O)
> usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O)
> adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O)
> q6_notifier_dlkm(O) q6_pdr_dlkm(O) [last unloaded: rmnet_perf]
> [154325.262939] Process usb@1.2-service (pid: 2501, stack limit
> = 0x00000000cb0343ac)
> [154325.262946] CPU: 5 PID: 2501 Comm: usb@1.2-service Tainted:
> G S W O 4.19.113-perf-g0307705d321bc #1
> [154325.262950] Hardware name: Qualcomm Technologies, Inc.
> xiaomi cas (DT)
> [154325.262955] pstate: 80400005 (Nzcv daif +PAN -UAO)
> [154325.262967] pc : power_operation_mode_show+0x34/0x58
> [154325.262971] lr : power_operation_mode_show+0x34/0x58
> [154325.262974] sp : ffffffc1376bf990
> [154325.262977] x29: ffffffc1376bf990 x28: ffffffc195aede58
> [154325.262981] x27: ffffffc195aede48 x26: ffffff9008c55638
> [154325.262986] x25: ffffffc05a44b300 x24: 0000000000001000
> [154325.262990] x23: ffffffc19a340018 x22: ffffffc19a340018
> [154325.262994] x21: ffffff900bb10038 x20: ffffff980aad8b68
> [154325.262998] x19: ffffffc05a44b300 x18: 0000000000000000
> [154325.263002] x17: 0000000000000000 x16: 0000000000000000
> [154325.263006] x15: 0000000000000000 x14: 00000000080a38f8
> [154325.263010] x13: ffffff880b489860 x12: 0000000000000000
> [154325.263014] x11: 0000000000000000 x10: 1ffffff30155b16d
> [154325.263018] x9 : 0000000000000000 x8 : 0000000000000007
> [154325.263022] x7 : 0000000000000000 x6 : 000000000000003f
> [154325.263026] x5 : 0000000000000040 x4 : 0000000000000000
> [154325.263030] x3 : 0000000000000004 x2 : ffffffc05a44b300
> [154325.263034] x1 : ffffff900bb10038 x0 : ffffff980aad8b68
> [154325.263039]
> [154325.263039] SP: 0xffffffc1376bf910:
> [154325.263043] f910 00001000 00000000 5a44b300 ffffffc0
> 08c55638 ffffff90 95aede48 ffffffc1
> [154325.263052] f930 95aede58 ffffffc1 376bf990 ffffffc1
> 09024b5c ffffff90 376bf990 ffffffc1
> [154325.263060] f950 09024b5c ffffff90 80400005 00000000
> 376bf9c0 ffffffc1 083cdf64 ffffff90
> [154325.263067] f970 ffffffff 0000007f 376bfd80 ffffffc1
> 376bf990 ffffffc1 09024b5c ffffff90
> [154325.263075] f990 376bf9b0 ffffffc1 08c55678 ffffff90
> 0bb10048 ffffff90 5a44b300 ffffffc0
> [154325.263082] f9b0 376bf9e0 ffffffc1 085075e0 ffffff90
> 0a5d43f8 ffffff90 9a9d9f00 ffffffc1
> [154325.263090] f9d0 95aede48 ffffffc1 95aede58 ffffffc1
> 376bfa30 ffffffc1 08506248 ffffff90
> [154325.263097] f9f0 95aede40 ffffffc1 00000000 00000000
> 00000001 00000000 9a9d9f00 ffffffc1
> [154325.263106] Call trace:
> [154325.263111] power_operation_mode_show+0x34/0x58
> [154325.263116] dev_attr_show+0x40/0x80
> [154325.263123] sysfs_kf_seq_show+0x110/0x1c0
> [154325.263127] kernfs_seq_show+0x80/0x98
> [154325.263133] seq_read+0x2d8/0x778
> [154325.263136] kernfs_fop_read+0xa4/0x2a8
> [154325.263142] __vfs_read+0xd4/0x2e8
> [154325.263145] vfs_read+0xe0/0x1b0
> [154325.263149] ksys_read+0xdc/0x170
> [154325.263153] __arm64_sys_read+0x44/0x58
> [154325.263158] el0_svc_common+0xd8/0x1d0
> [154325.263162] el0_svc_handler+0x90/0xb8
> [154325.263166] el0_svc+0x8/0xc
>
> Signed-off-by: lijiazi <lijiazi@xiaomi.com>
I need a name here that you sign legal documents with. If this is
"ligiazi", that's fine, but at least capitalize it?
> ---
> drivers/usb/typec/class.c | 2 ++
> include/linux/usb/typec.h | 1 +
> 2 files changed, 3 insertions(+)
>
> diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
> index cb1362187..bcc8f79 100644
> --- a/drivers/usb/typec/class.c
> +++ b/drivers/usb/typec/class.c
> @@ -1564,6 +1564,8 @@ void typec_set_pwr_opmode(struct typec_port *port,
> {
> struct device *partner_dev;
>
> + if (opmode >= TYPEC_PWR_MODE_MAX)
> + return;
Shouldn't we report the error somehow to userspace so they know they
have a broken device that needs to be fixed?
> if (port->pwr_opmode == opmode)
> return;
>
> diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
> index 5447532..e21c791 100644
> --- a/include/linux/usb/typec.h
> +++ b/include/linux/usb/typec.h
> @@ -56,6 +56,7 @@ enum typec_pwr_opmode {
> TYPEC_PWR_MODE_1_5A,
> TYPEC_PWR_MODE_3_0A,
> TYPEC_PWR_MODE_PD,
> + TYPEC_PWR_MODE_MAX,
If these are specific values that a device uses, then please set them to
the specific values and don't just rely on the compiler to set the
correctly.
thanks,
greg k-h
next prev parent reply other threads:[~2020-11-26 8:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-26 5:10 [PATCH] usb: typec: add sanity check for opmode lijiazi
2020-11-26 8:24 ` Greg Kroah-Hartman [this message]
2020-11-26 10:00 ` lijiazi
2020-11-26 10:28 ` Greg Kroah-Hartman
2020-11-26 12:45 ` lijiazi
2020-11-26 13:03 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X79mPTrr4rakUV8S@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=jqqlijiazi@gmail.com \
--cc=lijiazi@xiaomi.com \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).