Re: [PATCH v2] usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"

[Greg KH <gregkh@linuxfoundation.org>]

On Tue, Feb 21, 2023 at 06:30:04PM +0800, Ziyang Huang wrote:
> Some boards might use USB-A female connector for USB ports, however,
> the port could be connected to a dual-mode USB controller, making it
> also behaves as a peripheral device if male-to-male cable is connected.
> 
> In this case, the dts looks like this:
> 
> 	&usb0 {
> 		status = "okay";
> 		dr_mode = "otg";
> 		usb-role-switch;
> 		role-switch-default-mode = "host";
> 	};
> 
> After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call
> dwc2_force_mode() with parameter host=false, which causes inconsistent
> mode - The hardware is in peripheral mode while the kernel status is
> in host mode.
> 
> What we can do now is to call dwc2_drd_role_sw_set() to switch to
> device mode, and everything should work just fine now, even switching
> back to none(default) mode afterwards.
> 
> Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support")
> Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
> ---
> Changes since v1
> - Use corrent name in Signed-off-by

Nope, still incorrect, please use your synopsys address.

thanks,

greg k-h