Re: [PATCH v3 6/6] usb: gadget: uvc: add configfs option for sg support

[Dan Vacura <w36195@motorola.com>]

Hi Alan,

On Tue, Oct 18, 2022 at 10:32:33AM -0400, Alan Stern wrote:
> On Tue, Oct 18, 2022 at 02:27:13PM +0100, Dan Scally wrote:
> > Hi Dan
> > 
> > On 17/10/2022 21:54, Dan Vacura wrote:
> > > The scatter gather support doesn't appear to work well with some UDC hw.
> > > Add the ability to turn on the feature depending on the controller in
> > > use.
> > > 
> > > Signed-off-by: Dan Vacura <w36195@motorola.com>
> > 
> > 
> > Nitpick: I would call it use_sg everywhere, but either way:
> > 
> > 
> > Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
> > 
> > Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
> > 
> > > ---
> > > V1 -> V2:
> > > - no change, new patch in serie
> > > V2 -> V3:
> > > - default on, same as baseline
> > > 
> > >   Documentation/ABI/testing/configfs-usb-gadget-uvc | 1 +
> > >   Documentation/usb/gadget-testing.rst              | 2 ++
> > >   drivers/usb/gadget/function/f_uvc.c               | 2 ++
> > >   drivers/usb/gadget/function/u_uvc.h               | 1 +
> > >   drivers/usb/gadget/function/uvc_configfs.c        | 2 ++
> > >   drivers/usb/gadget/function/uvc_queue.c           | 4 ++--
> > >   6 files changed, 10 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
> > > index 5dfaa3f7f6a4..839a75fc28ee 100644
> > > --- a/Documentation/ABI/testing/configfs-usb-gadget-uvc
> > > +++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
> > > @@ -9,6 +9,7 @@ Description:	UVC function directory
> > >   		streaming_interval	1..16
> > >   		function_name		string [32]
> > >   		req_int_skip_div	unsigned int
> > > +		sg_supported		0..1
> > >   		===================	=============================
> > >   What:		/config/usb-gadget/gadget/functions/uvc.name/control
> > > diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst
> > > index f9b5a09be1f4..8e3072d6a590 100644
> > > --- a/Documentation/usb/gadget-testing.rst
> > > +++ b/Documentation/usb/gadget-testing.rst
> > > @@ -796,6 +796,8 @@ The uvc function provides these attributes in its function directory:
> > >   	function_name       name of the interface
> > >   	req_int_skip_div    divisor of total requests to aid in calculating
> > >   			    interrupt frequency, 0 indicates all interrupt
> > > +	sg_supported        allow for scatter gather to be used if the UDC
> > > +			    hw supports it
> 
> Why is a configuration option needed for this?  Why not always use SG 
> when the UDC supports it?  Or at least, make the decision automatically 
> (say, based on the amount of data to be transferred) with no need for 
> any user input?

Patches for a fix and to select to use SG depending on amount of data
are already submitted and under review. I agree, ideally we don't need
this patch, but there have been several regressions uncovered with
enabling this support and it takes time to root cause these issues.

In my specific environment, Android GKI 2.0, changes need to get
upstreamed first here before they're pulled into Android device
software. Having this logic in place gives us the ability to turn off
this functionality without going through this process. A revert was also
considered until all the bugs are resolved, but the code is quite
entrenched now to take out, plus others seem to benefit from it being
enabled. Thus the configurability.

> 
> Is this because the SG support in some UDC drivers is buggy?  In that 
> case the proper approach is to fix the UDC drivers, not add new options 
> that users won't know when to use.
> 
> Or is it because the UDC hardware itself is buggy?  In that case the 
> best approach is to fix the UDC drivers so that they don't advertise 
> working SG support when the hardware is unable to handle it.
> 
> Alan Stern