* [PATCH] USB: serial: option: add Fibocom FM160 0x0111 composition
@ 2022-11-09 21:24 Reinhard Speyerer
2022-11-15 10:01 ` Johan Hovold
0 siblings, 1 reply; 2+ messages in thread
From: Reinhard Speyerer @ 2022-11-09 21:24 UTC (permalink / raw)
To: Johan Hovold; +Cc: linux-usb
Add support for the following Fibocom FM160 composition:
0x0111: MBIM + MODEM + DIAG + AT
T: Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0111 Rev= 5.04
S: Manufacturer=Fibocom
S: Product=Fibocom FM160 Modem_SN:12345678
S: SerialNumber=12345678
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
---
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 697683e3fbff..693dd0e94e6e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2167,6 +2167,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) }, /* Fibocom MA510 (ECM mode) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) }, /* Fibocom FM160 (MBIM mode) */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] USB: serial: option: add Fibocom FM160 0x0111 composition
2022-11-09 21:24 [PATCH] USB: serial: option: add Fibocom FM160 0x0111 composition Reinhard Speyerer
@ 2022-11-15 10:01 ` Johan Hovold
0 siblings, 0 replies; 2+ messages in thread
From: Johan Hovold @ 2022-11-15 10:01 UTC (permalink / raw)
To: Reinhard Speyerer; +Cc: linux-usb
On Wed, Nov 09, 2022 at 10:24:15PM +0100, Reinhard Speyerer wrote:
> Add support for the following Fibocom FM160 composition:
>
> 0x0111: MBIM + MODEM + DIAG + AT
>
> T: Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=2cb7 ProdID=0111 Rev= 5.04
> S: Manufacturer=Fibocom
> S: Product=Fibocom FM160 Modem_SN:12345678
> S: SerialNumber=12345678
> C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
> A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
> E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
> I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Now applied, thanks!
Johan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-11-15 10:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-11-09 21:24 [PATCH] USB: serial: option: add Fibocom FM160 0x0111 composition Reinhard Speyerer
2022-11-15 10:01 ` Johan Hovold
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).