From: "Michał Kopeć" <michal@nozomi.space>
To: linux-usb <linux-usb@vger.kernel.org>
Cc: hdegoede@redhat.com
Subject: [PATCH] platform/x86: serial-multi-instantiate: allow single GpioInt IRQ for INT3515
Date: Tue, 12 Dec 2023 01:39:34 +0100 [thread overview]
Message-ID: <Y53J5S.LX6YEPYLP1CF2@nozomi.space> (raw)
On some devices, such as the Lenovo ThinkPad T14 Gen1 (AMD), there is
only one
GpioInt resource defined for all i2c device instances. Handle this case
appropriately by autodetecting the irq type and allowing fallback to
the first
IRQ index for the second, third and fourth tps6598x instances.
Additionally, to use the `platform_get_irq_optional` function to
silence errors
that may not be relevant if the IRQ is optional. In cases where the IRQ
is not
optional, `dev_err_probe` is still triggered, so other devices will not
be
affected by this change.
Signed-off-by: Michał Kopeć <michal@nozomi.space>
---
.../platform/x86/serial-multi-instantiate.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/platform/x86/serial-multi-instantiate.c
b/drivers/platform/x86/serial-multi-instantiate.c
index 8158e3cf5d6d..1c4cc44d5a88 100644
--- a/drivers/platform/x86/serial-multi-instantiate.c
+++ b/drivers/platform/x86/serial-multi-instantiate.c
@@ -23,6 +23,8 @@
#define IRQ_RESOURCE_APIC 2
#define IRQ_RESOURCE_AUTO 3
+#define IRQ_OPTIONAL BIT(2)
+
enum smi_bus_type {
SMI_I2C,
SMI_SPI,
@@ -59,7 +61,7 @@ static int smi_get_irq(struct platform_device *pdev,
struct acpi_device *adev,
dev_dbg(&pdev->dev, "Using gpio irq\n");
break;
}
- ret = platform_get_irq(pdev, inst->irq_idx);
+ ret = platform_get_irq_optional(pdev, inst->irq_idx);
if (ret > 0) {
dev_dbg(&pdev->dev, "Using platform irq\n");
break;
@@ -69,12 +71,12 @@ static int smi_get_irq(struct platform_device
*pdev, struct acpi_device *adev,
ret = acpi_dev_gpio_irq_get(adev, inst->irq_idx);
break;
case IRQ_RESOURCE_APIC:
- ret = platform_get_irq(pdev, inst->irq_idx);
+ ret = platform_get_irq_optional(pdev, inst->irq_idx);
break;
default:
return 0;
}
- if (ret < 0)
+ if (ret < 0 && !inst->flags & IRQ_OPTIONAL)
return dev_err_probe(&pdev->dev, ret, "Error requesting irq at index
%d\n",
inst->irq_idx);
@@ -210,6 +212,8 @@ static int smi_i2c_probe(struct platform_device
*pdev, struct smi *smi,
board_info.dev_name = name;
ret = smi_get_irq(pdev, adev, &inst_array[i]);
+ if (ret < 0 && inst_array[i].flags & IRQ_OPTIONAL)
+ ret = smi_get_irq(pdev, adev, &inst_array[0]);
if (ret < 0)
goto error;
board_info.irq = ret;
@@ -309,10 +313,11 @@ static const struct smi_node bsg2150_data = {
static const struct smi_node int3515_data = {
.instances = {
- { "tps6598x", IRQ_RESOURCE_APIC, 0 },
- { "tps6598x", IRQ_RESOURCE_APIC, 1 },
- { "tps6598x", IRQ_RESOURCE_APIC, 2 },
- { "tps6598x", IRQ_RESOURCE_APIC, 3 },
+ { "tps6598x", IRQ_RESOURCE_AUTO, 0 },
+ /* On some platforms only one shared GpioInt is defined */
+ { "tps6598x", IRQ_RESOURCE_AUTO | IRQ_OPTIONAL, 1 },
+ { "tps6598x", IRQ_RESOURCE_AUTO | IRQ_OPTIONAL, 2 },
+ { "tps6598x", IRQ_RESOURCE_AUTO | IRQ_OPTIONAL, 3 },
{}
},
.bus_type = SMI_I2C,
--
2.43.0
next reply other threads:[~2023-12-12 0:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-12 0:39 Michał Kopeć [this message]
2023-12-14 9:58 ` [PATCH] platform/x86: serial-multi-instantiate: allow single GpioInt IRQ for INT3515 Hans de Goede
-- strict thread matches above, loose matches on Subject: below --
2023-12-12 0:46 [PATCH v2] " Michał Kopeć
2023-12-12 10:38 ` [PATCH] " Michał Kopeć
2023-12-12 22:37 ` kernel test robot
2023-12-18 0:54 ` kernel test robot
2024-01-03 11:17 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y53J5S.LX6YEPYLP1CF2@nozomi.space \
--to=michal@nozomi.space \
--cc=hdegoede@redhat.com \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox